It's All About the Timing: When Do I Take This Injury to the Operating Room?

Over time, what was considered urgent or emergent in orthopaedic trauma has been revisited, and as awareness of factors associated with outcomes has increased, priorities have changed. There are multiple procedures performed urgently in the belief that early intervention allowed for better outcomes for the injury and the patient. Classic examples of conditions for which urgent intervention has been implemented include open fractures, femoral neck fractures in the young adult, talus fractures, and compartment syndrome. All of these conditions are considered nonurgent except for compartment syndrome, which requires urgent and timely intervention. Studies have demonstrated that these injuries need to be managed in a timely fashion but not necessarily in the middle of the night. Outcomes can be improved by measures such as early antibiotic administration for open fractures, closed reduction of talus fracture-dislocations, and anatomic reduction of femoral neck fractures. These measures are more important and useful than an emergent trip to the operating room by inexperienced surgeons with staff who may be unprepared. Orthopaedic surgeons should be familiar with open fractures and the timing of irrigation and débridement, the relative urgency of managing talus fractures, and the need for immediate reduction and fixation of femoral neck fractures. For each of these injuries, factors other than timing that affect outcomes will be described. Finally, the emergent nature of diagnosis and management of compartment syndrome must also be understood.

Ankle Fractures in Elderly Patients with Osteopenia and Neuropathy.

Ankle fractures are increasingly common in elderly patients given the number of aging individuals who remain active. The already difficult aspects of ankle fixation are amplified by the compromised soft-tissue envelope and bone quality present in elderly patients with an ankle fracture. In addition, elderly patients with an ankle fracture often have compromised neuroprotective mechanisms and are physically unable to follow postoperative protected weight-bearing protocols during ambulation. Surgeons should be aware of strategies to improve fixation and maintain the tibiotalar relationship during ambulation in elderly patients with an ankle fracture.

Periprosthetic Fractures About the Hip and Knee: Contemporary Techniques for Internal Fixation and Revision.

The number of periprosthetic fractures is expected to increase given the growing number of elderly individuals who are living longer and advances in technology that allow for total hip and knee arthroplasty in younger patients. Evolving technologies in combination with a better understanding of required total hip and knee reconstruction has allowed for continued improvements in applied fixation strategies and patient outcomes. Current fixation and revision options have led to reliable, reproducible management of periprosthetic fractures about the hip and knee, including proximal femur and supracondylar femur fractures, which are common, and fractures about an acetabular component and between proximal and distal hip and knee prostheses, which are rare. Orthopaedic surgeons should understand the most contemporary techniques, strategies, and formulas for the successful management of periprosthetic fractures about the hip and knee.

Does Early versus Delayed Spanning External Fixation Impact Complication Rates for High-energy Tibial Plateau and Plafond Fractures?

BACKGROUND: High-energy tibial plateau and tibial plafond fractures have a high complication rate and are frequently treated with a staged approach of spanning external fixation followed by definitive internal fixation after resolution of soft tissue swelling. A theoretical advantage to early spanning external fixation is that earlier fracture stabilization could prevent further soft tissue damage and potentially reduce the occurrence of subsequent infection. However, the relative urgency of applying the external fixator after injury is unknown, and whether delay in this intervention is correlated to subsequent treatment complications has not been examined. QUESTIONS/PURPOSES: Is delay of more than 12 hours to spanning external fixation of high-energy tibial plateau and plafond fractures associated with increased (1) infection risk; (2) compartment syndrome risk; and (3) time to definitive fixation, length of hospitalization, or risk of secondary surgeries? We further stratified our results based on injury site: plateau and plafond. In practical clinical terms, many of these high-energy C-type articular fractures will arrive at the regional trauma center in the evening and this investigation attempted to explore if these injuries need to be placed in temporizing fixators that evening or if they may be safely addressed in a dedicated trauma room the next morning. METHODS: We performed a retrospective review of all patients at a Level I university trauma center with high-energy tibial plateau and plafond fractures who underwent staged treatment with a spanning external fixation followed by subsequent definitive internal fixation between 2006 and 2012. Patients who received a fixator within 12 hours of recorded injury time were classified as early external fixation; those who received a fixator greater than 12 hours from injury were classified as delayed external fixation. There were 80 patients (42 plateaus and 38 plafonds) in the early external fixation cohort and 79 patients (45 plateaus and 34 plafonds) in the delayed external fixation cohort. Deep infection rate was 13% in plateau fractures and 18% in plafond fractures. Rates of infection, compartment syndrome, secondary surgeries, time to definitive fixation, and length of hospitalization were recorded. RESULTS: Controlling for differences in open fracture severity between groups, there was no difference in infection for plafond (early fixation: 12 of 38 [32%]; delayed fixation: seven of 34 [21%]; adjusted relative risk = 1.39 [95% confidence interval {CI}, 0.45-4.31], p = 0.573) and plateau (early fixation: eight of 42 [19%]; delayed fixation: nine of 45 [20%]; adjusted relative risk: 0.93 [95% CI, 0.31-2.78], p = 0.861) groups. For compartment syndrome risk, there was no difference between early and delayed groups for plateau fractures (early fixation: six of 42 [14%]; delayed fixation: three of 45 [7%]; relative risk = 0.47 [0.12-1.75], p = 0.304) and plafond fractures (early fixation: two of 38 [5%]; delayed fixation: three of 34 [9%]; relative risk = 1.67 [0.30-9.44], p = 0.662). There was no difference for length of hospitalization for early (9 ± 7 days) versus delayed fixation (9 ± 6 days) (mean difference = 0.24 [95% CI, -2.9 to 3.4], p = 0.878) for patients with plafond fracture. Similarly, there was no difference in length of hospitalization for early (10 ± 6 days) versus delayed fixation (8 ± 4 days) (mean difference = 1.6 [95% CI, -3.9 to 0.7], p = 0.170) for patients with plateau fracture. Time to definitive fixation for plateau fractures in the early external fixation group was 8 ± 6 days compared with 11 ± 7 days for the delayed external fixation group (mean difference = 2.9 [95% CI, 0.13-5.7], p = 0.040); there was no difference in time to definitive fixation for early (12 ± 7 days) versus delayed (12 ± 6 days) for patients with plafond fractures (mean difference = 0.39 [95% CI, -2.7 to 3.4], p = 0.801). There was no difference in risk of secondary surgeries between early external fixation (21 of 38 [55%]) and delayed external fixation (13 if 34 [38%]) for plafond fractures (adjusted relative risk = 0.69 [95% CI, 0.41-1.16], p = 0.165) and no difference between early fixation (24 of 42 [57%]) and delayed fixation (26 of 45 [58%]) for plateau fractures (adjusted relative risk = 1.0 [95% CI, 0.70-1.45], p = 1.00). CONCLUSIONS: We were unable to detect a difference in infection, compartment syndrome, secondary procedures, or length of hospitalization for patients who undergo early versus delayed external fixation for high-energy tibial plateau or plafond fractures. This may affect decisions for resource use at trauma centers such as whether high-energy periarticular lower extremity fractures need to be spanned on the evening of presentation or whether this procedure may wait until the morning trauma room. Given the high complication rate of these injuries and clinical relevance of this question, this may also need to be examined in a prospective manner. LEVEL OF EVIDENCE: Level IV, therapeutic study.

Does the lateral plate need to overlap the stem to mitigate stress concentration when treating Vancouver C periprosthetic supracondylar femur fracture?

The effect of construct length on cortical strain and load to failure between locked compression plating and cemented femoral stem in a fall model was analyzed. Eight Sawbone femurs with cemented stems were instrumented with increasing fixation lengths starting 8cm distal to stem tip and progressing proximally to overlapping constructs. Uniaxial strain gauges measured cortical strain. Load to failure was performed with 8cm gap between implants, 2cm gap, and proximally overlapping configurations. Strain was significantly reduced as the 8cm gap transitioned to an overlapped construct with most comparisons. Load to failure in the overlapped construct was 273% greater compared to 2cm gap construct. Overlapping the stem with a locking compression plate resulted in reduced strain and increased load to failure.

A nitinol based flexor tendon fixation device: gapping and tensile strength measurements in cadaver flexor tendon.

In this study, a new nitinol based fixation device was investigated for use in repairing severed digital flexor tendons. The device, composed of superelastic nitinol, is tubular in shape with inward facing tines for gripping tissue. Its cellular structure was designed such that it has a large effective Poisson's ratio, which facilitates a "finger trap" effect. This allows for reduced tendon compression during a resting state (to permit vascular perfusion) and increased compression during loading (to drive the tines into the tissue for gripping). To test the feasibility of using this device for flexor tendon repair, it was tested on cadaver flexor digitorum profundus tendons. The tendons were excised, cut in the region corresponding to a zone II laceration, and repaired using the device. The device was easy to install and did not prevent the tendon from bending. Constant strain rate tensile testing revealed a mean tensile strength of 57.6 ± 7.7 N, with a force of 53.2 ± 7.8 N at a 2 mm gap. This exceeds the suggested primary repair strength of 45 N, which has been proposed as the necessary strength for enabling early mobilization. Although considerable future studies will be needed to determine the suitability of the new repair device for clinical use, this study demonstrates the feasibility of utilizing a tubular, nitinol repair device for flexor tendon fixation.

The effect of insertion angle on the pullout strength of threaded suture anchors: a validation of the deadman theory.

PURPOSE: To determine the effect of insertion angle, from 45° to 135° in 15° increments, on the number of cycles withstood, the ultimate pullout strength, and the stiffness of threaded suture anchors subjected to load. METHODS: Threaded anchors were inserted into polyurethane foam at angles from 45° to 135°, in 15° increments, relative to the direction of pull. Five anchors were tested at each angle. The anchors were first cycled for 30 cycles (10 each at 100 N, 150 N, and 200 N). The surviving specimens were then tensioned to failure. The McNemar test was used to compare cyclic failure rates. Paired-samples t tests were used to compare load-to-failure (LTF) and stiffness data. All P values are multiplicity adjusted by the Hommel procedure. RESULTS: Four of 5 anchors inserted at 45° failed during cyclic testing at a mean of 27 cycles (P = .13). One of 5 anchors placed at 60° failed after 29 cycles (P = .99). All other anchors survived cyclic testing. Mean LTF was 234 N, 243 N, 297 N, 373 N, 409 N, 439 N, and 417 N at insertion angles of 45°, 60°, 75°, 90°, 105°, 120°, and 135°, respectively. LTF was significantly less for the 60° group when compared with the 90°, 105°, 120°, and 135° groups (P < .05). LTF was significantly less for the 75° group when compared with the 105°, 120°, and 135° groups (P < .05). For the 90° group, LTF was only significantly less when compared with the 135° group (P = .022). The differences in LTF between the 105°, 120°, and 135° groups were not significant. Stiffness increased from 28.13 N/mm at 90° to 43.4 N/mm at 105° (P = .03), 61.48 N/mm at 120° (P = .003), and 86.83 N/mm at 135° (P = .008). CONCLUSIONS: Anchors placed at more acute angles, that is, anchors placed closer to the so-called deadman's angle, failed at lower loads and provided less construct stiffness than anchors placed at angles greater than 90°. Stiffness also increased sequentially from an angle of insertion of 90° up to our maximum angle tested of 135°. For threaded metallic suture anchors, an obtuse insertion angle of 90° to 135° in relation to the line of pull of the suture and rotator cuff withstands a greater LTF and provides a stiffer construct than the more acute insertion angle advocated by the "deadman theory." CLINICAL RELEVANCE: This study offers a biomechanical validation for optimal placement of threaded suture anchors at an angle of 90° or more, as anatomic restraints allow, from the vector of pull of the attached suture and rotator cuff, rather than the 45° angle recommended by the deadman theory.

Rate of skin and nerve complications as a result of cutaneous traction with modern foam boots.

INTRODUCTION: Cutaneous traction is used to temporize lower extremity fractures and relies on friction between the skin and surrounding material to apply a longitudinal force. This circumferential compressive force can lead to pressure sores, skin sloughing, or compressive neuropathies. These complications have been reported in up to 11% of patients when the cutaneous traction relies on adhesive tapes, plaster, and rubber bandages being in immediate contact with the skin. The rates of these complications are not well documented when using modern foam boots. METHODS: A retrospective chart review was performed on all orthopedic trauma patients who suffered pelvic or lower extremity injuries between March 1st, 2020 and April 30th, 2021 at a single Level-1 trauma center. We included all patients with femoral fractures, axially unstable pelvic ring and/or acetabular fractures, and unstable hip dislocations temporized with the use of cutaneous traction. All patients had intact skin and lower extremity nerve function prior to application. RESULTS: There were 138 patients identified with 141 lower extremities. The average patient age was 50.7 (6-100) years. Mean traction weight of 9.8 (5-20) pounds. Average traction duration was 20.9 (2.3-243.5) hours. At the time of traction removal, there was 1 (0.7%) new skin wound and 0 nerve palsies. The new skin wound was a stage one heel pressure sore and did not require further treatment. CONCLUSION: Cutaneous traction with a modern foam boot was found to have a skin complication rate of 0.7% and a nerve palsy complication rate of 0% for an overall complication rate of 0.7%, which has not been previously established and is lower than historically reported complication rates of 11% when utilizing adhesive and plaster directly on skin. Foam boot Cutaneous traction may be considered a safe option for traction placement.

Early weight bearing after lower extremity fractures in adults.

Weight-bearing protocols should optimize fracture healing while avoiding fracture displacement or implant failure. Biomechanical and animal studies indicate that early loading is beneficial, but high-quality clinical studies comparing weight-bearing protocols after lower extremity fractures are not universally available. For certain fracture patterns, well-designed trials suggest that patients with normal protective sensation can safely bear weight sooner than most protocols permit. Several randomized, controlled trials of surgically treated ankle fractures have shown no difference in outcomes between immediate and delayed (≥6 weeks) weight bearing. Retrospective series have reported low complication rates with immediate weight bearing following intramedullary nailing of femoral shaft fractures and following surgical management of femoral neck and intertrochanteric femur fractures in elderly patients. For other fracture patterns, particularly periarticular fractures, the evidence in favor of early weight bearing is less compelling. Most surgeons recommend a period of protected weight bearing for patients with calcaneal, tibial plafond, tibial plateau, and acetabular fractures. Further studies are warranted to better define optimal postoperative weight-bearing protocols.

Biomechanical analysis of acetabular revision constructs: is pelvic discontinuity best treated with bicolumnar or traditional unicolumnar fixation?

Pelvic discontinuity in revision total hip arthroplasty presents problems with component fixation and union. A construct was proposed based on bicolumnar fixation for transverse acetabular fractures. Each of 3 reconstructions was performed on 6 composite hemipelvises: (1) a cup-cage construct, (2) a posterior column plate construct, and (3) a bicolumnar construct (no. 2 plus an antegrade 4.5-mm anterior column screw). Bone-cup interface motions were measured, whereas cyclical loads were applied in both walking and descending stair simulations. The bicolumnar construct provided the most stable construct. Descending stair mode yielded more significant differences between constructs. The bicolumnar construct provided improved component stability. Placing an antegrade anterior column screw through a posterior approach is a novel method of providing anterior column support in this setting.

Early postoperative step count and walking time have greater impact on lower limb fracture outcomes than load-bearing metrics.

INTRODUCTION: Weight-bearing protocols for rehabilitation of lower extremity fractures are the gold standard despite not being data-driven. Additionally, current protocols are focused on the amount of weight placed on the limb, negating other patient rehabilitation behaviors that may contribute to outcomes. Wearable sensors can provide insight into multiple aspects of patient behavior through longitudinal monitoring. This study aimed to understand the relationship between patient behavior and rehabilitation outcomes using wearable sensors to identify the metrics of patient rehabilitation behavior that have a positive effect on 1-year rehabilitation outcomes. METHODS: Prospective observational study on 42 closed ankle and tibial fracture patients. Rehabilitation behavior was monitored continuously between 2 and 6 weeks post-operative using a gait monitoring insole. Metrics describing patient rehabilitation behavior, including step count, walking time, cadence, and body weight per step, were compared between patient groups of excellent and average rehabilitation outcomes, as defined by the 1-year Patient Reported Outcome Measure Physical Function t-score (PROMIS PF). A Fuzzy Inference System (FIS) was used to rank metrics based on their impact on patient outcomes. Additionally, correlation coefficients were calculated between patient characteristics and principal components of the behavior metrics. RESULTS: Twenty-two patients had complete insole data sets, and 17 of which had 1-year PROMIS PF scores (33.7 ± 14.5 years of age, 13 female, 9 in Excellent group, 8 in Average group). Step count had the highest impact ranking (0.817), while body weight per step had a low impact ranking (0.309). No significant correlation coefficients were found between patient or injury characteristics and behavior principal components. General patient rehabilitation behavior was described through cadence (mean of 71.0 steps/min) and step count (logarithmic distribution with only ten days exceeding 5,000 steps/day). CONCLUSION: Step count and walking time had a greater impact on 1-year outcomes than body weight per step or cadence. The results suggest that increased activity may improve 1-year outcomes for patients with lower extremity fractures. The use of more accessible devices, such as smart watches with step counters combined with patient reported outcome measures may provide more valuable insights into patient rehabilitation behaviors and their effect on rehabilitation outcomes.

Sensor packaging design for continuous underfoot load monitoring.

Continuous force measurement can provide valuable insight to the efficacy of limb loading regimes during fracture rehabilitation. Currently there is no load monitoring device that is capable of more than 1 h of continuous recording. To enable continuous underfoot load monitoring a piezoresistive pressure sensor was encapsulated in a non-compressible silicone gel. This basic approach to signal transduction was implemented in three continuous underfoot load sensor designs. Design I constrained the gel in a rigid urethane housing. Design II constrained the gel in a silicone elastomer bladder. Design III utilized a hybrid approach by constraining the gel with a rigid upperplate inside of an elastomeric bladder. All three designs were subjected to bench and human testing. Design I outperformed the other two designs showing high linearity (correlation coefficient of 1), low static drift (<1%) and low dynamic drift (<3%) and captured the largest percentage of weight during human testing (35%). The sensor was designed, tested and shown to be durable and accurate for a 2 week window of time. This sensor has the low cost and high performance required for large scale clinical tests to correlate limb loading and fracture healing rates.

Complications of anterior subcutaneous internal fixation for unstable pelvis fractures: a multicenter study.

BACKGROUND: Stabilization after a pelvic fracture can be accomplished with an anterior external fixator. These devices are uncomfortable for patients and are at risk for infection and loosening, especially in obese patients. As an alternative, we recently developed an anterior subcutaneous pelvic internal fixation technique (ASPIF). QUESTIONS/PURPOSES: We asked if the ASPIF (1) allows for definitive anterior pelvic stabilization of unstable pelvic injuries; (2) is well tolerated by patients for mobility and comfort; and (3) has an acceptable complication rate. METHODS: We retrospectively reviewed 91 patients who incurred an unstable pelvic injury treated with an anterior internal fixator and posterior fixation at four Level I trauma centers. We assessed (1) healing by callous formation on radiographs and the ability to weightbear comfortably; (2) patient function by their ability to sit, stand, lie on their sides, and how well they tolerated the implants; and (3) complications during the observation period. The minimum followup was 6 months (mean, 15 months; range, 6-40 months). RESULTS: All 91 patients were able to sit, stand, and lie on their sides. Injuries healed without loss of reduction in 89 of 91 patients. Complications included six early revisions resulting from technical error and three infections. Irritation of the lateral femoral cutaneous nerve was reported in 27 of 91 patients and resolved in all but one. Heterotopic ossification around the implants, which was asymptomatic in all cases, occurred in 32 of 91 patients. CONCLUSIONS: The anterior internal fixator provided high rates of union for the anterior injury in unstable pelvic fractures. Patients were able to sit, stand and ambulate without difficulty. Infections and aseptic loosening were reduced but heterotopic ossification and irritation of the LFCN are common. LEVEL OF EVIDENCE: Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

A fluoroscopic grid in supine total hip arthroplasty: improving cup position, limb length, and hip offset.

We hypothesized that use of a novel fluoroscopic grid would decrease operative time and component positioning variability during anterior supine total hip arthroplasty (THA). We reviewed 99 anterior supine THAs: 39 using a fluoroscopic grid, and 60 using fluoroscopy alone. Goals were cup abduction of 40° ± 10° and limb length and hip offset within 10 mm of the contralateral side. Surgical time was decreased in the study group (79 vs 94 minutes, P = .002). In the study group, more components met the goal for cup abduction (97% vs 83%, P = .046), limb length (100% vs 88%, P = .04), hip offset (85% vs 67%, P = .047), and all 3 combined (82% vs 52%, P = .002). We demonstrated decreased component positioning variability during anterior supine THA with assistance of a fluoroscopic grid.

Fewer Hip Dislocations With Anterior Total Hip Arthroplasty for Displaced Femoral Neck Fracture.

The primary goal of this study was to compare dislocation rates with an anterior approach vs a posterior approach for patients who underwent total hip arthroplasty (THA) for displaced femoral neck fracture. A retrospective review was conducted of patients who underwent THA for acute femoral neck fracture at the authors' level I trauma center. All patients had at least 1 year of follow-up. Modified Harris Hip Score (mHHS) and EuroQol 5D-5L score were obtained to assess hip function and overall quality of life at a minimum of 12 months postoperatively. The study population included 76 patients (posterior, 22; anterior, 54), with mean follow-up of 39 months (range, 12-125 months). Significantly more postoperative complications occurred in the posterior group compared with the anterior group (7 vs 4, respectively; P=.006). In addition, significantly more hip dislocations occurred in the posterior group compared with the anterior group (3 vs 1, respectively; P=.037). The study did not show a difference in mHHS (anterior, 82; posterior, 77; P=.411). The findings suggest that an anterior-based approach to THA may result in fewer complications than a posterior-based approach for patients who have displaced femoral neck fracture. Patients should be counseled on the higher perioperative risk after surgery compared with patients undergoing elective THA. Patients undergoing THA with an anterior approach for femoral neck fracture can expect to achieve good hip functional outcome and good quality of life 12 months after surgery. [Orthopedics. 2021;44(2):e248-e252.].

Surgical treatment of osteoporotic fractures about the knee.

The surgical treatment of fractures about the knee in elderly patients and/or those with osteoporosis remains a problematic and evolving challenge to many orthopaedic surgeons. The fundamental issues of poor bone quality, poor hosts, and associated medical comorbidities makes treating these fractures difficult both in terms of the decision-making process and the chosen surgical technique. It is important to review major treatment challenges and the potential solutions for minimizing complications.

Effect of Statewide Social Distancing and Stay-At-Home Directives on Orthopaedic Trauma at a Southwestern Level 1 Trauma Center During the COVID-19 Pandemic.

OBJECTIVES: To compare orthopaedic trauma volume and mechanism of injury before and during statewide social distancing and stay-at-home directives. DESIGN: Retrospective. SETTING: Level 1 trauma center. PATIENTS/PARTICIPANTS: One thousand one hundred thirteen patients sustaining orthopaedic trauma injuries between March 17 and April 30 of years 2018, 2019, and 2020. INTERVENTION: Statewide social distancing and stay-at-home directives. MAIN OUTCOME MEASUREMENTS: Number of consults, mechanism of injury frequency, and type of injury frequency. RESULTS: During the COVID-19 pandemic, orthopaedic trauma consult number decreased. Injuries due to gunshot wounds increased and those due to automobile versus pedestrian accidents decreased. Time-to-presentation increased and length of stay decreased. Operative consults remained unchanged. CONCLUSIONS: Orthopaedic trauma injuries continued to occur during the COVID-19 pandemic at an overall decreased rate, however, with a different distribution in mechanism and type of injury. LEVEL OF EVIDENCE: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

A Comparison of the Open Semi-extended Parapatellar Versus Standard Entry Tibial Nailing Techniques and Knee Pain: A Randomized Controlled Trial.

OBJECTIVE: To determine if an open, semi-extended, parapatellar tibial nailing technique (SEK) imparts any undue knee symptoms/pain compared with the traditional infrapatellar tibial nailing technique (FK). DESIGN: Randomized controlled trial. SETTING: Level 1 trauma center. PATIENTS: Forty-seven patients with OTA/AO 42A-C tibial shaft fractures were included in the study. INTERVENTION: Patients were randomized to treatment with either a SEK or an FK technique. MAIN OUTCOME: The main outcome was a symptoms subset of the International Knee Documentation Committee (SS-IKDC) pertaining to knee symptoms/pain. RESULTS: Final follow-up was collected at 1 year for 24 SEK and 23 FK patients. No significant differences were found between the groups in regards to demographics, injury, or surgery-related variables. The 2 techniques did have equivalent symptoms scores [mean for the difference (SEK - FK): 0.29, 90% confidence interval: -4.16 to 4.75] but did not have equivalent pain scores [mean for the difference (SEK - FK): 0.2, 90% confidence interval: -3.18 to 3.59]. When comparing demographic and injury-related variables to the SS-IKDC, only Kellgren-Lawrence classification was statistically significant (P = 0.026), where increasing presence of osteoarthritis was associated with lower scores. CONCLUSIONS: The results of this single-center randomized controlled trial show that SEK and FK techniques for tibial nailing are equivalent in regards to knee symptoms (defined as ±5 points on the SS-IKDC) but not specifically pain that showed trends toward decreasing knee pain with the open SEK technique. This randomized controlled trial demonstrates that the use of the open semi-extended, parapatellar technique for tibial nailing should not be associated with any higher likelihood of knee pain/symptoms than the traditional flexed knee, infrapatellar technique. LEVEL OF EVIDENCE: Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.

Short Versus Long Cephalomedullary Nails for Fixation of Stable Versus Unstable Intertrochanteric Femur Fractures at a Level 1 Trauma Center.

The purpose of this study was to compare failure and complication rates associated with short cephalomedullary nail vs long cephalomedullary nail fixation for stable vs unstable intertrochanteric femur fractures. This study included 201 adult patients with nonpathologic intertrochanteric femur fractures without subtrochanteric extension (OTA 31-A1.1-3, 31-A2.1-3, 31-A3.1-3) who were treated with a short cephalomedullary nail (n=70) or a long cephalomedullary nail (n=131) and had at least 6 months of follow-up. Treatment groups were similar in terms of age, sex, and comorbidities. In the stable fracture group (N=81), there was no difference in total complications (adjusted P=.73), failure (adjusted P=.78), or mortality (adjusted P=.62) between short cephalomedullary nails and long cephalomedullary nails. Unstable fracture patterns were more likely to be treated with a long cephalomedullary nail than a short cephalomedullary nail (P=.01). In the unstable fracture group (N=120), there was no difference in total complications (adjusted P=.32) or failure (adjusted P=.31) between short cephalomedullary nails and long cephalomedullary nails. A cumulative mortality curve showed a trend toward increasing mortality in unstable fractures treated with short cephalomedullary nails. Traumatologists did not display a statistically significant preference between short cephalomedullary nails and long cephalomedullary nails when compared with nontraumatologists. [Orthopedics. 2019; 42(2):e202-e209.].

The effect of cartilage-derived morphogenetic protein 2 on initial healing of a rotator cuff defect in a rat model.

This animal study evaluated the healing of supraspinatus tendon tears by use of a cartilage-derived morphogenetic protein 2 growth factor (CDMP-2) delivered to the repair. Forty-eight rats had bilateral, surgically created complete tears repaired by sutures with the growth factor introduced on one side. They were killed at 2, 3, 4, and 6 weeks, and the strength of the repairs was determined and histologic analysis performed. At 4 and 6 weeks, the CDMP-2-treated repairs were significantly stronger than the untreated repairs and histologic analysis showed more organized healing. The use of growth factors introduced at the time of rotator cuff repair might promote more rapid healing and subsequent, rapid patient rehabilitation.