RESUMO
The synthesis, enhancement, and maintenance of magnetite-based catalyst nanoparticles (NPs) are important for photocatalytic activity and recovery rates. We used a sodium borohydride (NaBH4) calcination method to modify MnFe2O4 nanoparticles to optimize their performance in the photocatalytic oxidation of 2,5-hydroxymethylfurfural. The results indicated a 94% increase in photocatalytic efficiency, while magnetic assessments performed using a vibrating sample magnetometer showed an 8.9% improvement in magnetic properties without degradation. These findings show the dual benefits of increased photocatalytic performance with strong magnetic properties, which are important for the application and reusability of photocatalysts. The recycling of these photocatalysts reduces secondary pollution and increases the process cost-effectiveness. These results contribute to the solution of problems with the use of photocatalytic materials.
RESUMO
Recently, extensive efforts have been directed at finding novel 2D-layered structures with anisotropic crystal structures. Herein, the in-plane anisotropic optical and (photo)electrical properties of 2D SiAs nanosheets synthesized using a solid-state reaction and subsequent mechanical exfoliation are reported. The angle-resolved polarized Raman spectrum shows high in-plane anisotropy of the phonon vibration modes, which are consistent with the theoretical prediction. Field-effect transistor devices fabricated using the SiAs nanosheets demonstrate significant anisotropy in the hole mobility with an anisotropic ratio as high as 5.5. Photodetectors fabricated with single SiAs nanosheet exhibit high sensitivity in the UV-visible region, and the anisotropic ratio of the photocurrent reaches 5.3 at 514.5 nm and 2.3 at 325 nm. This work lays the foundation for future research in anisotropic 2D materials.
RESUMO
2D MoS2 nanostructures have recently attracted considerable attention because of their outstanding electrocatalytic properties. The synthesis of unique Co-Ru-MoS2 hybrid nanosheets with excellent catalytic activity toward overall water splitting in alkaline solution is reported. 1T' phase MoS2 nanosheets are doped homogeneously with Co atoms and decorated with Ru nanoparticles. The catalytic performance of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is characterized by low overpotentials of 52 and 308 mV at 10 mA cm-2 and Tafel slopes of 55 and 50 mV decade-1 in 1.0 m KOH, respectively. Analysis of X-ray photoelectron and absorption spectra of the catalysts show that the MoS2 well retained its metallic 1T' phase, which guarantees good electrical conductivity during the reaction. The Gibbs free energy calculation for the reaction pathway in alkaline electrolyte confirms that the Ru nanoparticles on the Co-doped MoS2 greatly enhance the HER activity. Water adsorption and dissociation take place favorably on the Ru, and the doped Co further catalyzes HER by making the reaction intermediates more favorable. The high OER performance is attributed to the catalytically active RuO2 nanoparticles that are produced via oxidation of Ru nanoparticles.
RESUMO
It is challenging to control the electronic structure of 2D transition metal dichalcogenides (TMD) for extended applications in renewable energy devices. Here, ReSe2-VSe2 (Re1- xVxSe2) alloy nanosheets over the whole composition range via a colloidal reaction is synthesized. Increasing x makes the nanosheets more metallic and induces a 1Tâ³-to-1T phase transition at x = 0.5-0.6. Compared to the MoSe2-VSe2 and WSe2-VSe2 alloy nanosheets, ReSe2 and VSe2 are mixed more homogeneously at the atomic scale. The alloy nanosheets at x = 0.1-0.7 exhibit an enhanced electrocatalytic activity toward acidic hydrogen evolution reaction (HER). In situ X-ray absorption fine structure measurements reveal that alloying caused the Re and V atoms to be synergically more active in the HER. Gibbs free energy (ΔGH*) and density of state calculations confirm that alloying and Se vacancies effectively activate the metal sites toward HER. The composition dependence of HER performance is explained by homogenous atomic mixing with the increased Se vacancies. The study provides a strategy for designing new TMD alloy nanosheets with enhanced catalytic activity.
RESUMO
The phase control of transition metal dichalcogenides (TMDs) is an intriguing approach for tuning the electronic structure toward extensive applications. In this study, WSe2 nanosheets synthesized via a colloidal reaction exhibit a phase conversion from semiconducting 2H to metallic 2M under Se-rich growth conditions (i.e., increasing the concentration of Se precursor or lowering the growth temperature). High-resolution scanning transmission electron microscopy images are used to identify the stacking sequence of the 2M phase, which is distinctive from that of the 1T' phase. First-principles calculations employing various Se-rich models (intercalation and substitution) indicated that Se enrichment induces conversion to the 2M phase. The 2M phase WSe2 nanosheets with the Se excess exhibited enhanced electrocatalytic performance in the hydrogen evolution reaction (HER). In situ X-ray absorption fine structure studies suggested that the excess Se atoms in the 2M phase WSe2 enhanced the HER catalytic activity, which is supported by the Gibbs free energy (ΔGH* ) of H adsorption and the Fermi abundance function. These results provide an appealing strategy for phase control of TMD catalysts.
RESUMO
Ternary alloying of transition metal dichalcogenides (TMDs) has the potential for altering the electronic structure of materials to suit electrochemical applications. Herein, we synthesized (MoWV)Se2 nanosheets at various compositions via a colloidal reaction. The mole fraction of V atoms (xV) was successfully increased up to 0.8, producing a metallic phase that is highly durable against hydration. Furthermore, we synthesized (MoW)Se2 nanosheets over the entire composition range. The atomic mixing of the ternary alloys is more random than that of the constitutional binary alloys, as supported by first-principles calculations. Compared to binary alloying, ternary alloying more effectively enhanced the electrocatalytic activity for acidic hydrogen evolution reaction (HER). The HER performance increased upon increasing xV to 0.44, and thereafter, it declined at higher xV primarily owing to surface oxidation. The analysis of Gibbs free energy for H adsorption revealed that ternary alloying strongly activates the basal plane for the HER. VSe2 contains numerous sites favorable for H adsorption, facilitating the composition-dependent HER. These results provide a pioneering strategy for designing multicomponent TMD catalysts that maximize the advantages of each component.
RESUMO
Alloying of transition metal dichalcogenides (TMDs) is a pioneering method for engineering electronic structures with expanded applications. In this study, MoSe2 -VSe2 -NbSe2 ternary alloy nanosheets are synthesized via a colloidal reaction. The composition is successfully tuned over a wide range to adjust the 2H-1T phase transition. The alloy nanosheets consist of miscible atomic structures at all compositions, which is distinct from immiscible binary alloys. Compared to each binary alloy, the ternary alloys display higher electrocatalytic activity toward the hydrogen evolution reaction (HER) in an acidic electrolyte. The HER performance exhibits a volcano-type composition dependence, which is correlated with the experimental d-band center (εd ). Spin-polarized density functional theory (DFT) calculations consistently predict the homogenous atomic distributions. The Gibbs free energy of H adsorption (ΔGH* ) and the activation barrier (Ea ) support that miscible ternary alloying greatly enhances the HER performance.
RESUMO
Polytypes of two-dimensional transition metal dichalcogenide can extend the architecture and application of nanostructures. Herein, Nb1-xVxSe2 alloy nanosheets in the full composition range (x) were synthesized by a colloidal reaction. At x = 0.1-0.3, a phase transition occurred from various hexagonal (three 2H and one 4H types) phase NbSe2 to an atomically homogeneous 1T phase VSe2. Density functional theory calculations also revealed a polytypic phase transition at x = 0.3, which was shifted close to 0 in the presence of Se vacancies. Furthermore, the calculations validate favorable formation of Se vacancies at the phase transition. The sample at x = 0.3 exhibited enhanced electrocatalytic activity toward the hydrogen evolution reaction (HER) in 0.5 M H2SO4. The Gibbs free energy indicates that the catalytic HER performance is correlated with the active Se vacancy sites of polytypic structures.
RESUMO
The polymorphism of nanostructures is of paramount importance for many promising applications in high-performance nanodevices. We report the chemical vapor deposition synthesis of Ga2S3 nanowires (NWs) that show the consecutive phase transitions of monoclinic (M) â hexagonal (H) â wurtzite (W) â zinc blende (C) when lowering the growth temperature from 850 to 600 °C. At the highest temperature, single-crystalline NWs were grown in the thermodynamically stable M phase. Two types of H phase exhibited 1.8 nm periodic superlattice structures owing to the distinctively ordered Ga sites. They consisted of three rotational variants of the M phase along the growth direction ([001]M = [0001]H/W) but with different sequences in the variants. The phases shared the same crystallographic axis within the NWs, producing novel core-shell structures to illustrate the phase evolution. The relative stabilities of these phases were predicted using density functional theory calculations, and the results support the successive phase evolution. Photodetector devices based on the p-type M and H phase Ga2S3 NWs showed excellent UV photoresponse performance.
RESUMO
Composition modulation of transition metal dichalcogenides is an effective way to engineer their crystal/electronic structures for expanded applications. Here, fully composition-tuned W1-xNbxSe2 alloy nanosheets were produced via colloidal synthesis. These nanosheets ultimately exhibited a notable transition between WSe2 and NbSe2 hexagonal phases at x = 0.6. As x approaches 0.6, point doping is converted into cluster doping and eventually separated domains of WSe2 and NbSe2. Extensive density functional theory calculations predicted the composition-dependent crystal structures and phase transitions, consistently with the experiments. The electrocatalytic activity for the hydrogen evolution reaction (HER) in acidic electrolyte was significantly enhanced at x = 0.2, which was linked with the d-band center. The Gibbs free energy for the H adsorption at various basal and edge sites supported the enhanced HER performance of the metallic alloy nanosheets. We suggested that the dispersed doping structures of Nb atoms resulted in the best HER performance. Our findings highlight the significance of composition tuning in enhancing the catalytic activity of alloys.
RESUMO
Tuning the electronic structures of transition metal dichalcogenides (TMD) is essential for their implementation in next-generation energy technologies. In this study, we synthesized composition-tuned WSe2-VSe2 (W1-xVxSe2, x = 0-1) alloyed nanosheets using a colloidal reaction. Alloying the semiconducting WSe2 with VSe2 converts the material into a metallic one, followed by a 2H-to-1T phase transition at x = 0.7. Over a wide composition range, WSe2 and VSe2 are atomically immiscible and form separate ordered domains. The miscible alloy at x = 0.1 displayed enhanced electrocatalytic activity toward the hydrogen evolution reaction (HER) in an acidic electrolyte. This trend was correlated with the d-band center via a volcano-type relationship. Spin-polarized density functional theory calculations consistently predicted the atomic immiscibility, which became more significant at the 2H-1T phase transition composition. The Gibbs free energy of H adsorption on the basal planes (Se or hole sites) and the activation barriers along the Volmer-Heyrovsky reaction pathway supported the enhanced HER performance of the alloy phase, suggesting that the dispersed V-doped structures were responsible for the best HER catalytic activity. Our study demonstrates how the atomic structure of TMD alloy nanosheets plays a crucial role in enhancing catalytic activity.
RESUMO
Earth-abundant transition metal dichalcogenide nanosheets have emerged as an excellent catalyst for electrochemical water splitting to generate H2. Alloying the nanosheets with heteroatoms is a promising strategy to enhance their catalytic performance. Herein, we synthesized hexagonal (2H) phase Mo1-xNbxSe2 nanosheets over the whole composition range using a solvothermal reaction. Alloying results in a variety of atomic-scale crystal defects such as Se vacancies, metal vacancies, and adatoms. The defect content is maximized when x approaches 0.5. Detailed structure analysis revealed that the NbSe2 bonding structures in the alloy phase are more disordered than the MoSe2 ones. Compared to MoSe2 and NbSe2, Mo0.5Nb0.5Se2 exhibits much higher electrocatalytic performance for hydrogen evolution reaction. First-principles calculation was performed for the formation energy in the models for vacancies and adatoms, supporting that the alloy phase has more defects than either NbSe2 or MoSe2. The calculation predicted that the separated NbSe2 domain at x = 0.5 favors the concurrent formation of Nb/Se vacancies and adatoms in a highly cooperative way. Moreover, the Gibbs free energy along the reaction path suggests that the enhanced HER performance of alloy nanosheets originates from the higher concentration of defects that favor H atom adsorption.
RESUMO
Alloys of transition-metal dichalcogenide can display distinctive phase evolution because of their two-dimensional structures. Herein, we report the colloidal synthesis of Mo1-xVxSe2 alloy nanosheets with full composition tuning. Alloying led to a phase transition at x = 0.7 from the semiconducting 2H phase MoSe2 to the metallic 1T phase VSe2. It also produced significant V and Se vacancies, which became the richest in the 2H phase at x = 0.3-0.5. Extensive spin-polarized density functional theory calculations consistently predicted the 2H-1T phase transition at x = 0.7, in agreement with the experimental results. The vacancy formation energy also supports the formation of V and Se vacancies. Alloying in the 2H phase enhanced the electrocatalytic performance toward hydrogen evolution reaction (HER) at x = 0.3 (in 0.5 M H2SO4) or 0.4 (in 1 M KOH). The Gibbs free energy along the HER pathway indicates that this maximum performance is due to the highest concentration of active V and Se vacancy sites.
RESUMO
Two-dimensional Re dichalcogenide nanostructures are promising electrocatalysts for the hydrogen evolution reaction (HER). Herein, we report the adatom doping of various transition metals (TM = Mn, Fe, Co, Ni, and Cu) in ReSe2 nanosheets synthesized using a solvothermal reaction. As the atomic number of TM increases from Mn to Cu, the adatoms on Re sites become more favored over the substitution. In the case of Ni, the fraction of adatoms reaches 90%. Ni doping resulted in the most effective enhancement in the HER catalytic performance, which was characterized by overpotentials of 82 and 109 mV at 10 mA cm-2 in 0.5 M H2SO4 and 1 M KOH, respectively, and the Tafel slopes of 54 and 81 mV dec-1. First-principles calculations predicted that the adatom doping structures (TMs on Re sites) have higher catalytic activity compared with the substitution ones. The adsorbed H atoms formed a midgap hybridized state via direct bonding with the orbitals of TM adatom. The present work provides a deeper understanding into how TM doping can provide the catalytically active sites in these ReSe2 nanosheets.
RESUMO
Two-dimensional ReSe2 has emerged as a promising electrocatalyst for the hydrogen evolution reaction (HER), but its catalytic activity needs to be further improved. Herein, we synthesized Re1-xMoxSe2 alloy nanosheets with the whole range of x (0-100%) using a hydrothermal reaction. The phase evolved in the order of 1Tâ³ (triclinic) â 1T' (monoclinic) â 2H (hexagonal) upon increasing x. In the nanosheets with x = 10%, the substitutional Mo atoms tended to aggregate in the 1Tâ³ ReSe2 phase with Se vacancies. The incorporation of the 1T' phase makes the alloy nanosheets more metallic than the end compositions. The 10% Mo substitution significantly enhanced the electrocatalytic performance toward HER (in 0.5 M H2SO4), with a current of 10 mA cm-2 at an overpotential of 77 mV (vs RHE) and a Tafel slope of 42 mV dec-1. First-principles calculations of the three phases (1Tâ³, 2H, and 1T') predicted a phase transition of 1Tâ³-2H at x ≈ 65% as well as the production of a 1T' phase along the composition tuning, which are consistent with the experiments. At x = 12.5%, two Mo atoms prefer to form a pair along the Re4 chains. Gibbs free energy along the reaction path indicates that the best HER performance of nanosheets with 10% Mo originates from the Mo atoms that form Mo-H when there are adjacent Se vacancies.
RESUMO
Two-dimensional MoSe2 has emerged as a promising electrocatalyst for the hydrogen evolution reaction (HER), although its catalytic activity needs to be further improved. Herein, we report Se-rich MoSe2 nanosheets synthesized using a hydrothermal reaction, displaying much enhanced HER performance at the Se/Mo ratio of 2.3. The transition from the 2H to the 1T' phase occurred as Se/Mo exceeded 2. Structural analysis revealed the presence of Se adatoms as well as the formation of Se-Se bonding. Based on first-principles calculations, we propose two equally stable Se-rich structures. In the first one, excess Se atoms bridge two MoSe2 layers via the interlayer Se-Se bonds. In the second one, the Se atoms substitute for the Mo atoms, and extra Se atoms are added closest to the Mo-substituted Se. Calculation of Gibbs free energy along the reaction path indicates that the Se adatoms of the second model are the most active sites for HER.
RESUMO
Two-dimensional MoS2 meets porphyrin molecules to form unique 1T' phase intercalated complexes via a one-step procedure of hydrothermal reactions. The resultant Mn-porphyrin-MoS2 exhibits excellent electrocatalytic activity toward the hydrogen evolution reaction, with a Tafel slope of 35 mV dec-1 and 10 mA cm-2 at an overpotential of 0.125 V. Spin-polarized density functional theory calculations confirmed that the intercalation of Mn-porphyrin into 1T'-MoS2 is quite favourable due to strong charge transfer from Mn metals. Their outstanding catalytic performance could be ascribed to the high electron concentration as well as the low activation barrier of the Heyrovsky reaction.
RESUMO
Two-dimensional (2D) MoS2 nanostructures have been extensively investigated in recent years because of their fascinating electrocatalytic properties. Herein, we report 2D hybrid nanostructures consisting of 1T' phase MoS2 and Fe-phthalocyanine (FePc) molecules that exhibit excellent catalytic activity toward both the hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). X-ray absorption spectra revealed an increased Fe-N distance (2.04 Å) in the hybrid complex relative to the isolated FePc. Spin-polarized density functional theory calculations predicted that the Fe center moves toward the MoS2 layer and induces a non-planar structure with an increased Fe-N distance of 2.05 Å, which supports the experimental results. The experiments and calculations consistently show a significant charge transfer from FePc to stabilize the hybrid complex. The excellent HER catalytic performance of FePc-MoS2 is characterized by a low Tafel slope of 32 mV dec-1 at a current density of 10 mA cm-2 and an overpotential of 0.123 V. The ORR catalytic activity is superior to that of the commercial Pt/C catalyst in pH 13 electrolyte, with a more positive half-wave potential (0.89 vs. 0.84 V), a smaller Tafel slope (35 vs. 87 mV·dec-1), and a much better durability (9.3% vs. 40% degradation after 20 h). Such remarkable catalytic activity is ascribed to the HER-active 1T' phase MoS2 and the ORR-active nonplanar Fe-N4 site of FePc.
RESUMO
Photocatalytic water splitting is a vital technology for clean renewable energy. Despite enormous progress, the search for earth-abundant photocatalysts with long-term stability and high catalytic activity is still an important issue. We report three possible polymorphs of nickel selenide (orthorhombic phase NiSe2, cubic phase NiSe2, and hexagonal phase NiSe) as bifunctional catalysts for water-splitting photoelectrochemical (PEC) cells. Photocathodes or photoanodes were fabricated by depositing the nickel selenide nanocrystals (NCs) onto p- or n-type Si nanowire arrays. Detailed structural analysis reveals that compared to the other two types, the orthorhombic NiSe2 NCs are more metallic and form less surface oxides. As a result, the orthorhombic NiSe2 NCs significantly enhanced the performance of water-splitting PEC cells by increasing the photocurrents and shifting the onset potentials. The high photocurrent is ascribed to the excellent catalytic activity toward water splitting, resulting in a low charge-transfer resistance. The onset potential shift can be determined by the shift of the flat-band potential. A large band bending occurs at the electrolyte interface, so that photoelectrons or photoholes are efficiently generated to accelerate the photocatalytic reaction at the active sites of orthorhombic NiSe2. The remarkable bifunctional photocatalytic activity of orthorhombic NiSe2 promises efficient PEC water splitting.
RESUMO
The imminent global energy crisis and current environmental issues have stimulated considerable research on high-performance catalysts for sustainable hydrogen energy generation. Two-dimensional layered MoS2 has recently drawn worldwide attention because of its excellent catalytic properties for the hydrogen evolution reaction (HER). In the present work, we prepared nitrogen (N)-rich 1T' (distorted 1T) phase MoS2 layered nanostructures using different alkyl amines with 1-4 nitrogen atoms (methylamine, ethylenediamine, diethylenetriamine, and triethylenetetramine) as intercalants. The amine molecules intercalate at 10 atomic%, and simultaneously supply the N atoms that substitute the S atoms to produce the N-doped MoS2, whose composition is MoS2(1-x)Nx, where x = 0.1-0.26. MoS2 prepared with amines having more N atoms has enhanced catalytic HER performance: a Tafel slope of 36 mV dec-1 and 10 mA cm-2 at -160 mV (vs. RHE). First-principles calculations showed that the amine intercalation and N doping increase the density of states near the Fermi level in a narrow range and bring about an effective overlap of the dz2(Mo), pz(S), and pz(N) states. These factors in turn increase the carrier (electron) concentration and mobility for improved HER. The calculation also predicted that the most active site is S vacancies. The present work illustrates how the HER catalytic performance of 1T' phase MoS2 can be effectively controlled by the amine molecules.