RESUMO
Achieving time-dependent phosphorescence color (TDPC) in organic materials is attractive but extremely challenging due to the nonradiative decay and modulation puzzle of triplet state. Herein, xylan, a hemicellulose waste from the paper mill, was used to construct carbonized polymer dots (CPDs) with clusterization-triggered room-temperature phosphorescence (RTP). CPDs were endowed with tuneable triplet energy levels by through-space conjugation of heteroatom groups, which could be confined in silica to simultaneously activate surface oxide-related low-energy and cross-linked core N-related high-energy emissive centers. Thus, the blue emissive center with a lifetime of 425.6 ms and green emissive center with a longer lifetime of 1506 ms coexisted in the confined CPDs; the former was the dominant contribution to RTP at first, and the latter became dominant over time, leading to a typical TDPC evolution with large color contrast from blue to blue-green and then to green. Meanwhile, the TDPC could remain unobstructed after the confined CPDs were soaked in water for more than a month. The CPDs were successfully applied in location and deformation imaging of hydrogel and advanced dynamic information encryption and anticounterfeiting. The work may shed new light on the design of TDPC materials and broaden the high-value use of paper-mill waste xylan.
RESUMO
Sustainable long-lived room temperature phosphorescence (RTP) materials with color-tunable afterglows are attractive but rarely reported. Here, cellulose is reconstructed by directed redox to afford ample active hydroxyl groups and water-solubility; arylboronic acids with various π conjugations can be facilely anchored to reconstructed cellulose via click chemistry within 1 min in pure water, resulting in full-color tunable RTP cellulose. The rigid environment provided by the BâO covalent bonds and hydrogen bonds can stabilize the triplet excitons, thus the target cellulose displays outstanding RTP performances with the lifetime of 2.67 s, phosphorescence quantum yield of 9.37%, and absolute afterglow luminance of 348 mcd m-2. Furthermore, due to the formation of various emissive species, the smart RTP cellulose shows excitation- and time-dependent afterglows. Taking advantages of sustainability, ultralong lifetime, and full-color tunable afterglows, et al, the environmentally friendly RTP cellulose is successfully used for nontoxic afterglow inks, delay lighting, and afterglow display.
RESUMO
Polysaccharide nanocrystals have led to the development of multifunctional and sustainable materials, but most are glucose-based carbohydrates derived from valuable natural sources. Here, we present a top-down strategy that enables one, for the first time, to isolate xylose-based hemicellulose nanocrystals from available industrial biowastes. By leveraging the selective oxidation of alkaline periodate, as high as 34 wt % solid yield is accessible. The hemicellulose nanocrystals exhibit platelet-like shapes (10-20 nm thickness, 30-80 nm wide), crystalline features, and superior dispersibility in water. We also showcase their successful interface applications for one-dimensional (1D) carbon nanotube (CNT) nanoinks and two-dimensional (2D) transition-metal dichalcogenide (TMD) nanozymes, which are comparable to the traditional cellulose nanocrystals. The scalable, low-cost, and sustainable hemicellulose nanocrystals can be envisioned to provide an alternative for glucose-based polysaccharide nanocrystals, as well as hold promise for the high-value utilization of biowastes.
Assuntos
Nanopartículas , Polissacarídeos , Polissacarídeos/química , Celulose/química , Nanopartículas/química , GlucoseRESUMO
A photoresponsive host-guest supramolecular complex (WP5âG) constructed by water-soluble pillar[5]arene (WP5) and spiropyran derivative (G) is presented. The spontaneous isomerization of G from spiropyran (SP) form to ring-opened merocyanine (MC) form happens either alone or in WP5âG in aqueous media. Irradiated by visible light, G can be converted into SP form completely and the hydrophilicity will be changed. G and WP5âG are both verified to self-assemble into nanospheres. Upon exposure to visible light, WP5âG reassemble into nanovesicles due to the change of supra-amphiphilicity, while G alone does not have this transition. Obviously, WP5 takes the key role that activates the photoinduced morphological transition.
Assuntos
Benzopiranos/química , Calixarenos/química , Indóis/química , Nanosferas/química , Nitrocompostos/química , Tensoativos/química , Benzopiranos/síntese química , Calixarenos/síntese química , Portadores de Fármacos/síntese química , Portadores de Fármacos/química , Humanos , Indóis/síntese química , Luz , Nitrocompostos/síntese química , Compostos de Amônio Quaternário , Solubilidade , Tensoativos/síntese química , Água/químicaRESUMO
Supramolecular self-assembly has attracted increasing attention as a breakthrough methodology in the fields of nanoscience and nanotechnology. Herein, a perylene dianhydride derivative (TP-PDA) self-assembles into well-defined nanospheres through a nucleation-growth process. The mechanisms of this process were explored by using spectral analysis, dynamic light scattering (DLS), and scanning electron microscopy (SEM). In situ DLS and in situ SEM both revealed that the size of the aggregated nanospheres increases with time until the formation of equilibrium H-aggregates. This shows that TP-PDA undergoes a kinetically trapped assembly with a rapid transformation into the thermodynamically favored form, and this process can be finely tuned by reducing the concentration and increasing the temperature. Weak intermolecular forces, such as π-π stacking, hydrogen bonding, and solvophobic interactions, play an important role in the formation of nanostructures. This work inspired us to explore other kinetically trapped supramolecular assemblies that might be easily ignored due to the short trapping time of commonly used experimental timescales.
RESUMO
Shaping room temperature phosphorescence (RTP) materials into 3D bodies is important for stereoscopic optoelectronic displays but remains challenging due to their poor processability and mechanical properties. Here, konjac glucomannan (KGM) is employed to anchor arylboronic acids with various π conjugations via a facile BâO covalent reaction to afford printable inks, using which full-color high-fidelity 3D RTP objects with high mechanical strength can be obtained via direct ink writing-based 3D printing and freeze-drying. The doubly rigid structure supplied by the synergy of hydrogen bonding and BâO covalent bonding can protect the triplet excitons; thus, the prepared 3D RTP object shows a striking lifetime of 2.14 s. The printed counterparts are successfully used for 3D anti-counterfeiting and can be recycled and reprinted nondestructively by dissolving in water. This success expands the scope of printable 3D luminescent materials, providing an eco-friendly platform for the additive manufacturing of sophisticated 3D RTP architectures.
RESUMO
Phase change materials (PCM) are promising for thermal regulation and energy storage, but suffer from the deformation and leakage of capsules. Herein, inspired by cellulose nanocrystal (CNC), xylan nanocrystal (XNC) with a dimension of 25-60 nm was successfully prepared through oxalic acid hydrolysis of high-crystalline xylan as raw materials via a top-down approach. With the introduction of hydrophobic groups, compared to XNC, succinylated XNC showed more remarkable emulsifying property over 7 days of storage at room temperature. Microencapsulated PCM composite consisting of sodium alginate (SA) as "matrix" and succinylated xylan nanocrystal (XNC) stabilized paraffin-based Pickering capsule (PCM beads) as "core" was facilely fabricated. PCM composite with the latent heat of 105.59 J·g-1 showed excellent thermoregulating performance. Our work suggests a new pathway toward sustainability of hemicelluloses in the application of food emulsion and thermal energy management.
Assuntos
Nanopartículas , Xilanos , Emulsões/química , Celulose/química , Temperatura Alta , Nanopartículas/químicaRESUMO
The increasing accumulation of plastic waste has brought serious environmental issues. Biodegradable plastics are promising candidates to solve the problem but still remain a scientific challenge. Here, xylan plastic (XP) was fabricated by a strategy of double cross-linking through etherification combined with hot pressing. The mechanical properties, particularly the toughness of XP, were significantly enhanced by the incorporation of chemical and physical cross-linking domains. The tensile strength, toughness, and modulus of XP can reach up to 55 MPa, 2.2 MJ/m3, and 1.7 GPa, respectively, which are superior to most traditional plastics. Dynamic mechanical analysis (DMA) characterizations confirmed that XP is thermoplastic and can be hot formed. Additionally, the reversible hydrogen bond interaction between xylan chains could be simply regulated by water molecules, rendering XP readily transformed and repeatedly reprogrammed into versatile 2D/3D shapes. Moreover, XP showed a low thermal expansion coefficient and excellent optical properties. Cytotoxicity and degradability tests demonstrated that XP had excellent nontoxicity and can be biodegraded in 60 days. This work thus suggests an avenue for the scalable production of high-performance xylan-based plastics, in which the raw material comes from industrial wastes and exhibits great potential in response to plastic pollution.
RESUMO
The fractionation of hemicelluloses is a promising method to improve the comprehensive utilization of lignocellulosic biomass. However, the effective fractionation of hemicelluloses is always limited by the structural complexity and easy degradability. In this study, tetramethylammonium hydroxide (TMAH) was developed to fractionate hemicelluloses from poplar holocellulose with high molecular weights and high yields at room temperature. Approximately 90% of hemicelluloses could be dissolved at room temperature in 1 h, and the yield was up to 81.9%. Compared with the fractionation using NaOH solution, the hemicelluloses isolated by TMAH solvent showed a more complete structure and higher purity. Meanwhile, the retention rate of cellulose after treatment with TMAH was up to 90.2%, and the crystal structure of cellulose in the residues was practically unchanged. Moreover, the TMAH solvent could be recycled to fractionate hemicelluloses. The work provides an elegant and significantly efficient method towards hemicelluloses fractionation and cellulose purification.
Assuntos
Celulose , Polissacarídeos , Celulose/química , Temperatura , Polissacarídeos/química , SolventesRESUMO
The large-scale preparation of sustainable room-temperature phosphorescence (RTP) materials, particularly those with stimulus-response properties, is attractive but remains challenging. This study develops a facile heterogeneous BâO covalent bonding strategy to anchor arylboronic acid chromophores to cellulose chains using pure water as a solvent, resulting in multicolor RTP cellulose. The rigid environment provided by the BâO covalent bonds and hydrogen bonds promotes the triplet population and suppresses quenching, leading to an excellent lifetime of 1.42 s for the target RTP cellulose. By increasing the degree of chromophore conjugation, the afterglow colors can be tuned from blue to green and then to red. Motivated by this finding, a papermaking production line is built to convert paper pulp reacted with an arylboronic acid additive into multicolor RTP paper on a large scale. Furthermore, the RTP paper is sensitive to water because of the destruction of hydrogen bonds, and the stimuli-response can be repeated in response to water/heat stimuli. The RTP paper can be folded into 3D afterglow origami handicrafts and anti-counterfeiting packing boxes or used for stimulus-responsive information encryption. This success paves the way for the development of large-scale, eco-friendly, and practical stimuli-responsive RTP materials.
RESUMO
Bamboo (Phyllostachys pubescens) is an attractive biomass block to develop biorefining industry, however, less emphasis has been placed on elucidating the chemical linkage variations of lignin and LCC between different bamboo cell walls. Here, purified milled wood lignin (MWLp) and lignin-carbohydrate complex (LCC) were isolated from bamboo (Phyllostachys pubescens) fibers (BF) and parenchyma cells (PC), respectively. The variations of structure features and chemical linkages of lignin and LCC were investigated via FT-IR, 2D HSQC NMR, and 31P NMR techniques. 2D HSQC NMR revealed that ß-O-4 alkyl-aryl ether linkages and resinol (ß-ß) substructure were the main substructures in BF-MWLp and PC-MWLp. ß-1 linkages existed in the PC-MWLp (3.18/100 Ar), but not in BF-MWLp. Moreover, tricin, as a flavonoid compound, was only detected in the BF-MWLp. The amount of the syringyl (S) units of PC-MWLp was higher than BF-MWLp. The results indicated that phenyl glycoside (PhGlc) bonds (mainly lignin and xylan) were the predominant chemical linkage type of LCC bonds in BF-LCC and PC-LCC, and the high contents of PhGlc bonds (45.53/100 Ar) were presented in PC. Our finding can provide a reference for the structural variations of lignin and LCC between the different bamboo cell walls.
Assuntos
Glicosídeos Cardíacos , Lignina , Lignina/química , Espectroscopia de Infravermelho com Transformada de Fourier , Poaceae/química , Espectroscopia de Ressonância Magnética , Glicosídeos , Xilanos/químicaRESUMO
The crested ibis, one of the most endangered birds in the world, could benefit from research into its genetic diversity as a tool for conservation in the future. Tyrosinase is thought to play a major role in the production of common yellow to black melanins in birds. We have cloned and sequenced four exons of the crested ibis tyrosinase gene and discovered that the amino acid sequence has high similarity to zebra finch tyrosinase (93 %), followed by chicken (91 %) and quail (91 %). Some functional and structural domains in the crested ibis tyrosinase coding area were found to be conserved during evolution. Nine sequence variants were found in the partial coding sequence, one in exon 1 and eight in exon 4. Sequence variant 1 (SV1) shows intermediate polymorphism (0.25 < PIC < 0.5), and further study is needed to determine whether it can be used as a potential molecular marker in crested ibis artificial breeding programs.
Assuntos
Proteínas Aviárias/genética , Aves/genética , Monofenol Mono-Oxigenase/química , Sequência de Aminoácidos , Animais , Sequência de Bases , Sítios de Ligação , Galinhas/genética , China , Clonagem Molecular , Biologia Computacional , Sequência Conservada , Espécies em Perigo de Extinção , Evolução Molecular , Éxons , Frequência do Gene , Marcadores Genéticos , Heterozigoto , Dados de Sequência Molecular , Monofenol Mono-Oxigenase/genética , Polimorfismo Genético , Estrutura Terciária de Proteína , Homologia de Sequência de AminoácidosRESUMO
Lysophosphatidic acid (LPA) as the biomarker of early stage ovarian cancer is essentially difficult to detect due to lack of target spots. A dually crosslinked supramolecular hydrogel (DCSH) was developed to achieve sensing of LPA, which acts as a competitive guest molecule triggering the responsive crosslinking of the DCSH. Through this strategy, the surface plasmon resonance combined with optical waveguide spectroscopy could be used to quantitatively detect LPA with a responsive range covering physiological conditions (in pure form as well as mimicking LPA plasma solution) with high selectivity and sensitivity. LPA efficiently immerses into the host molecule ß-cyclodextrin (ß-CD) up to a 1:2 ratio by the competitive interaction mechanism, confirmed by one-dimensional nuclear overhauser effect spectroscopy (1D NOESY), high-resolution mass spectrometry (HRMS), isothermal titration calorimetry (ITC), and computational simulation. Our method opens a new strategy to detect biomarkers without target spots and provides a platform for surface plasmon resonance (SPR)-based sensors measuring small molecules.
Assuntos
Biomarcadores Tumorais/análise , Reagentes de Ligações Cruzadas/química , Hidrogéis/química , Lisofosfolipídeos/análise , Neoplasias Ovarianas/diagnóstico , Técnicas Biossensoriais , Simulação por Computador , Feminino , Humanos , Limite de Detecção , Conformação Molecular , Ressonância de Plasmônio de Superfície , beta-Ciclodextrinas/químicaRESUMO
Radical anions of electron-deficient systems are widely used, but are easily reoxidized upon exposure to air. Therefore, the stabilization of radical anions under ambient conditions is of great significance, but still remains a scientific challenge. Herein, perylenediimide is employed to prepare a crystalline metal-organic framework for stabilizing radical anions without extensive chemical modification. The porous, three-dimensional framework of perylenediimide can trap electron donors such as amine vapors and produce radical anions in-situ through photo-induced electron transfer. The radical anions are protected against quenching by shielding effect in air and remain unobstructed in air for at least a month. Because of the high yield and stability of the radical anions, which are the basis for near-infrared photothermal conversion, the framework shows high near-infrared photothermal conversion efficiency (η = 52.3%). The work provides an efficient and simple method towards ambient stable radical anions and affords a promising material for photothermal therapy.
RESUMO
A supramolecular circularly polarized luminescence (CPL) system was constructed based on the co-gelation of an achiral tetraphenylethylene derivative and chiral organic gelators of glutamic acid in chloroform. Adjusting the stoichiometric ratio was found to be an effective strategy for regulating the handedness of CPL.
RESUMO
This study investigated six cases of septicemia in young crested ibises (Nipponia nippon). These birds all died with similar clinical signs, including sudden death, anorexia, diarrhea, and lameness. Immediately after death, the birds were necropsied; a blood sample was taken from heart and tissues were sampled from liver, lung, spleen, peritoneal mucus, and feces for bacteriologic examination. Anatomic observation showed that the main findings common to the sick birds were arthrocele, associated with congestion in the femur, tibiotarsus, and ventral side; swelling in the liver; hemorrhagic pericarditis; miliary tubercles in lung; and fibrous tubercles in the synovial capsule of the knee joint with suppurative abscesses. Through bacterial examination, the colonial type of Escherichia coli strain was represented prominently in cultures of the feces, heart blood, liver, lung, spleen, suppurative mucus of the synovial capsule, and peritoneal exudate. These symptoms suggested that the death of a number of endangered crested ibis within a short period was evidence of septicemia. The bacterial inoculation tests were also conducted using domestic pigeon, native chicken, and mice for the presence of and infection with E coli. The study provided indications of the possible role of E. coli strains as bird pathogens and a potential risk in endangered species. Further work is needed to characterize E. coli strains and the toxin production in this bird. This disease occurrence also adds a note of caution to the continued efforts and interest in the reintroduction of the ibis back into its former wild ranges to ensure that formerly captive individuals do not transmit disease to the wild populations of its own or other sympatric species.
Assuntos
Doenças das Aves/epidemiologia , Doenças das Aves/microbiologia , Aves/microbiologia , Infecções por Escherichia coli/veterinária , Sepse/veterinária , Animais , Doenças das Aves/patologia , China/epidemiologia , Escherichia coli/isolamento & purificação , Infecções por Escherichia coli/epidemiologia , Infecções por Escherichia coli/patologia , Prevalência , Sepse/epidemiologia , Sepse/microbiologia , Sepse/patologiaRESUMO
Amphiphilic molecules have received wide attention as they possess both hydrophobic and hydrophilic properties, and can form diverse nanostructures in selective solvents. Herein, we report an asymmetric amphiphilic zwitterionic perylene bisimide (AZP) with an octyl chain and a zwitterionic group on the opposite imide positions of perylene tetracarboxylic dianhydride. The controllable nanostructures of AZP with tunable hydrophilic/hydrophobic surface have been investigated through solvent-dependent amphiphilic self-assembly as confirmed by SEM, TEM, and contact angle measurements. The planar perylene core of AZP contributes to strong π-π stacking, while the amphiphilic balance of asymmetric AZP adjusts the self-assembly property. Additionally, due to intermolecular π-π stacking and solvent-solute interactions, AZP could self-assemble into hydrophilic microtubes in a polar solvent (acetone) and hydrophobic nanofibers in an apolar solvent (hexane). This facile method provides a new pathway for controlling the surface properties based on an asymmetric amphiphilic zwitterionic perylene bisimide.
RESUMO
Developing a specific, ratiometric, and reversible detection method for metal ions is significant to guard against the threat of metal-caused environmental pollution and organisms poisoning. Here a supramolecular host-guest system (WP5âG) based on water-soluble pillar[5]arene (WP5) and water-soluble quaternized perylene diimide derivative (G) was constructed. Morphological transformation was achieved during the process of adding WP5 into G aqueous solution, and a fluorescence "turn-off" phenomenon was observed which was caused by supramolecular photoinduced electron transfer (PET). Meanwhile, hydrophobic effect and electrostatic interaction played important roles in this supramolecular process, which was confirmed by isothermal titration calorimeter (ITC) and ζ potential experiments. Furthermore, the supramolecular host-guest system could be a "turn-on" fluorescent probe for Fe3+ ion detection through the process of interdicting supramolecular PET. Moreover, the Fe3+ ion detection showed specific, ratiometric, and reversible performances with a detection limit of 2.13 × 10-7 M, which might have great potentials in biological and environmental monitoring.
RESUMO
Spiropyran (SP), which can respond to acid, ultraviolet irradiation, and mechanical force, has received great attention as a classic molecule for the construction of stimuli-responsive materials. However, the self-assembly behavior of SP with a tunable morphology has rarely been investigated. In the present work, a SP derivative bearing two carboxyl groups and one hydroxyl group was prepared and used as a model to investigate the optical properties, molecular self-assembly, and morphology of SP. This pH-responsive derivative could undergo a large morphology variation from a sphere- to a rodlike structure by adjusting the acidity. The indoline and pyridopyran fragments contributed to π-π stacking, whereas the carboxyl groups contributed to hydrogen bonding. Both π-π stacking and hydrogen bonding contributed to the pH-responsive self-assembly. The morphologies of spiropyran aggregates formed under different conditions were characterized by SEM, TEM, and FTIR spectroscopy. Control of the morphology of the spiropyran nanostructure was achieved.