Crystallize It before It Diffuses: Kinetic Stabilization of Thin-Film Phosphorus-Rich Semiconductor CuP2.

Numerous phosphorus-rich metal phosphides containing both P-P bonds and metal-P bonds are known from the solid-state chemistry literature. A method to grow these materials in thin-film form would be desirable, as thin films are required in many applications and they are an ideal platform for high-throughput studies. In addition, the high density and smooth surfaces achievable in thin films are a significant advantage for characterization of transport and optical properties. Despite these benefits, there is hardly any published work on even the simplest binary phosphorus-rich phosphide films. Here, we demonstrate growth of single-phase CuP2 films by a two-step process involving reactive sputtering of amorphous CuP2+x and rapid annealing in an inert atmosphere. At the crystallization temperature, CuP2 is thermodynamically unstable with respect to Cu3P and P4. However, CuP2 can be stabilized if the amorphous precursors are mixed on the atomic scale and are sufficiently close to the desired composition (neither too P poor nor too P rich). Fast formation of polycrystalline CuP2, combined with a short annealing time, makes it possible to bypass the diffusion processes responsible for decomposition. We find that thin-film CuP2 is a 1.5 eV band gap semiconductor with interesting properties, such as a high optical absorption coefficient (above 105 cm-1), low thermal conductivity (1.1 W/(K m)), and composition-insensitive electrical conductivity (around 1 S/cm). We anticipate that our processing route can be extended to other phosphorus-rich phosphides that are still awaiting thin-film synthesis and will lead to a more complete understanding of these materials and of their potential applications.

Practical Guide to the Design, Fabrication, and Calibration of NIST Nanocalorimeters.

We report here on the design, fabrication, and calibration of nanocalorimeter sensors used in the National Institute of Standards and Technology (NIST) Nanocalorimetry Measurements Project. These small-scale thermal analysis instruments are produced using silicon microfabrication approaches. A single platinum line serves as both the heater and temperature sensor, and it is made from a 500 µm wide, 100 nm thick platinum trace, suspended on a 100 nm thick silicon nitride membrane for thermal isolation. Supplemental materials to this article (available online) include drawing files and LabVIEW code used in the fabrication and calibration process.

Nanocalorimetry-coupled time-of-flight mass spectrometry: identifying evolved species during high-rate thermal measurements.

We report on measurements integrating a nanocalorimeter sensor into a time-of-flight mass spectrometer (TOFMS) for simultaneous thermal and speciation measurements at high heating rates. The nanocalorimeter sensor was incorporated into the extraction region of the TOFMS system to provide sample heating and thermal information essentially simultaneously with the evolved species identification. This approach can be used to measure chemical reactions and evolved species for a variety of materials. Furthermore, since the calorimetry is conducted within the same proximal volume as ionization and ion extraction, evolved species detected are in a collision-free environment, and thus, the possibility exists to interrogate intermediate and radical species. We present measurements showing the decomposition of ammonium perchlorate, copper oxide nanoparticles, and sodium azotetrazolate. The rapid, controlled, and quantifiable heating rate capabilities of the nanocalorimeter coupled with the 0.1 ms temporal resolution of the TOFMS provides a new measurement capability and insight into high-rate reactions, such as those seen with reactive and energetic materials, and adsorption\desorption measurements, critical for understanding surface chemistry and accelerating catalyst selection.

Label-free immunodetection with CMOS-compatible semiconducting nanowires.

Semiconducting nanowires have the potential to function as highly sensitive and selective sensors for the label-free detection of low concentrations of pathogenic microorganisms. Successful solution-phase nanowire sensing has been demonstrated for ions, small molecules, proteins, DNA and viruses; however, 'bottom-up' nanowires (or similarly configured carbon nanotubes) used for these demonstrations require hybrid fabrication schemes, which result in severe integration issues that have hindered widespread application. Alternative 'top-down' fabrication methods of nanowire-like devices produce disappointing performance because of process-induced material and device degradation. Here we report an approach that uses complementary metal oxide semiconductor (CMOS) field effect transistor compatible technology and hence demonstrate the specific label-free detection of below 100 femtomolar concentrations of antibodies as well as real-time monitoring of the cellular immune response. This approach eliminates the need for hybrid methods and enables system-scale integration of these sensors with signal processing and information systems. Additionally, the ability to monitor antibody binding and sense the cellular immune response in real time with readily available technology should facilitate widespread diagnostic applications.

Polyethyleneimine/polyethylene glycol-conjugated gold nanoparticles as nanoscale positive/negative controls in nanotoxicology: testing in frog embryo teratogenesis assay-Xenopus and mammalian tissue culture system.

Despite the great potential of using positively charged gold nanoparticles (AuNPs) in nanomedicine, no systematic studies have been reported on their synthesis optimization or colloidal stability under physiological conditions until a group at the National Institute of Standards and Technology recently succeeded in producing remarkably stable polyethyleneimine (PEI)-coated AuNPs (Au-PEI). This improved version of Au-PEI (Au-PEI25kB) has increased the demand for toxicity and teratogenicity information for applications in nanomedicine and nanotoxicology. In vitro assays for Au-PEI25kB in various cell lines showed substantial active cytotoxicity. For advanced toxicity research, the frog embryo teratogenesis assay-Xenopus (FETAX) method was employed in this study. We observed that positively-charged Au-PEI25kB exhibited significant toxicity and teratogenicity, whereas polyethylene glycol conjugated AuNPs (Au-PEG) used as comparable negative controls did not. There is a characteristic avidity of Au-PEI25kB for the jelly coat, the chorionic envelope (also known as vitelline membrane) and the cytoplasmic membrane, as well as a barrier effect of the chorionic envelope observed with Au-PEG. To circumvent these characteristics, an injection-mediated FETAX approach was utilized. Like treatment with the FETAX method, the injection of Au-PEI25kB severely impaired embryo development. Notably, the survival/concentration curve that was steep when the standard FETAX approach was employed became gradual in the injection-mediated FETAX. These results suggest that Au-PEI25kB may be a good candidate as a nanoscale positive control material for nanoparticle analysis in toxicology and teratology.

Growth and Decomposition of Pt Surface Oxides.

The formation and thermal stability of Pt surface oxides on a Pt thin film were studied in situ using ambient-pressure X-ray photoelectron spectroscopy. At an oxygen pressure of 73 Pa (550 mTorr), the surface Pt oxide was gradually formed, evidenced by the O 1s peak at 529.5 eV as the Pt film was heated. The Pt oxide peak reached a maximum between 217 and 317 °C and then decreased as the sample temperature was further increased. A similar response was seen on cooling from 480 to 23 °C; the intensity of the Pt oxide peak first increased and then decreased. The remaining Pt surface oxides partially decomposed during ultra-high-vacuum (UHV) pumping and completely decomposed during heating in UHV, which highlights the challenge of characterizing these surfaces with UHV instruments. These results have important implications for the understanding of the surface states of platinum films in different environments and the roles of different catalytic mechanisms.

Spaceflight-related suboptimal conditions can accentuate the altered gravity response of Drosophila transcriptome.

Genome-wide transcriptional profiling shows that reducing gravity levels during Drosophila metamorphosis in the International Space Station (ISS) causes important alterations in gene expression: a large set of differentially expressed genes (DEGs) are observed compared to 1g controls. However, the preparation procedures for spaceflight and the nonideal environmental conditions on board the ISS subject the organisms to additional environmental stresses that demonstrably affect gene expression. Simulated microgravity experiments performed on the ground, under ideal conditions for the flies, using the random position machine (RPM), show much more subtle effects on gene expression. However, when the ground experiments are repeated under conditions designed to reproduce the additional environmental stresses imposed by spaceflight procedures, 79% of the DEGs detected in the ISS are reproduced by the RPM experiment. Gene ontology analysis of them shows they are genes that affect respiratory activity, developmental processes and stress-related changes. Here, we analyse the effects of microgravity on gene expression in relation to the environmental stresses imposed by spaceflight. Analysis using 'gene expression dynamics inspector' (GEDI) self-organizing maps reveals a subtle response of the transcriptome to microgravity. Remarkably, hypergravity simulation induces similar response of the transcriptome, but in the opposite direction, i.e. the genes promoted under microgravity are usually suppressed under hypergravity. These results suggest that the transcriptome is finely tuned to normal gravity and that microgravity, together with environmental constraints associated with space experiments, can have profound effects on gene expression.

Small-scale systems for in vivo drug delivery.

Recent developments in the application of micro- and nanosystems for drug administration include a diverse range of new materials and methods. New approaches include the on-demand activation of molecular interactions, novel diffusion-controlled delivery devices, nanostructured 'smart' surfaces and materials, and prospects for coupling drug delivery to sensors and implants. Micro- and nanotechnologies are enabling the design of novel methods such as radio-frequency addressing of individual molecules or the suppression of immune response to a release device. Current challenges include the need to balance the small scale of the devices with the quantities of drugs that are clinically necessary, the requirement for more stable sensor platforms, and the development of methods to evaluate these new materials and devices for safety and efficacy.

Moving smaller in drug discovery and delivery.

Advances in new micro- and nanotechnologies are accelerating the identification and evaluation of drug candidates, and the development of new delivery technologies that are required to transform biological potential into medical reality. This article will highlight the emerging micro- and nanotechnology tools, techniques and devices that are being applied to advance the fields of drug discovery and drug delivery. Many of the promising applications of micro- and nanotechnology are likely to occur at the interfaces between microtechnology, nanotechnology and biochemistry.

Multi-environment Nanocalorimeter with Electrical Contacts for Use in the Scanning Electron Microscope.

We have developed a versatile nanocalorimeter sensor which allows imaging and electrical measurements of samples under different gaseous environments using the scanning electron microscope (SEM) and can simultaneously measure the sample temperature and associated heat of reaction. This new sensor consists of four independent heating/sensing elements for nanocalorimetry and eight electrodes for electrical measurements, all mounted on a 50 nm thick, 250 µm × 250 µm suspended silicon nitride membrane. This membrane is highly electron transparent and mechanically robust enabling in situ SEM observation under realistic temperatures, environmental conditions and pressures up to one atmosphere. To demonstrate this new capability, we report here on 1) in situ SEM-nanocalorimetry study of melting and solidification of polyethylene oxide, 2) the temperature dependence of conductivity of a nanowire; 3) the electron beam induced current measurements (EBID) of a nanowire in vacuum and air. Furthermore, the sensor is easily adaptable to operate in liquid environment and is compatible with most existing SEM. This versatile platform couples nanocalorimetry with in situ SEM imaging under various gaseous and liquid environments and is applicable to materials research, nanotechnology, energy, catalysis and biomedical applications.

Nanoparticle-aptamer bioconjugates: a new approach for targeting prostate cancer cells.

Nucleic acid ligands (aptamers) are potentially well suited for the therapeutic targeting of drug encapsulated controlled release polymer particles in a cell- or tissue-specific manner. We synthesized a bioconjugate composed of controlled release polymer nanoparticles and aptamers and examined its efficacy for targeted delivery to prostate cancer cells. Specifically, we synthesized poly(lactic acid)-block-polyethylene glycol (PEG) copolymer with a terminal carboxylic acid functional group (PLA-PEG-COOH), and encapsulated rhodamine-labeled dextran (as a model drug) within PLA-PEG-COOH nanoparticles. These nanoparticles have the following desirable characteristics: (a) negative surface charge (-50 +/- 3 mV, mean +/- SD, n = 3), which may minimize nonspecific interaction with the negatively charged nucleic acid aptamers; (b) carboxylic acid groups on the particle surface for potential modification and covalent conjugation to amine-modified aptamers; and (c) presence of PEG on particle surface, which enhances circulating half-life while contributing to decreased uptake in nontargeted cells. Next, we generated nanoparticle-aptamer bioconjugates with RNA aptamers that bind to the prostate-specific membrane antigen, a well-known prostate cancer tumor marker that is overexpressed on prostate acinar epithelial cells. We demonstrated that these bioconjugates can efficiently target and get taken up by the prostate LNCaP epithelial cells, which express the prostate-specific membrane antigen protein (77-fold increase in binding versus control, n = 150 cells per group). In contrast to LNCaP cells, the uptake of these particles is not enhanced in cells that do not express the prostate-specific membrane antigen protein. To our knowledge, this represents the first report of targeted drug delivery with nanoparticle-aptamer bioconjugates.

In vivo evaluation of tetrahedral amorphous carbon.

The in vivo behavior and tissue reaction to tetrahedral amorphous carbon (ta-C) has been evaluated for periods of up to 6 months in SV129 mice. Two sample types were tested--silicon die coated with ta-C (n = 53) and micromachined particles (n = 40). The coated samples were compared to uncoated silicon die (n = 22). Die samples were implanted subcutaneously, and tissue reaction and capsule formation were evaluated at various time points. Micromachined particles of 1, 3, 10, and 30 microm were injected adjacent to the sciatic nerve, and tissue samples were examined histologically at various time points (4 days-6 months). Tissue reaction to ta-C was mild and was localized to the area of the injection or implantation. Samples with a higher ratio of 3-fold bonding appeared to shed material during the experiments; this was not observed on samples with a higher level of 4-fold bonding, nor on uncoated silicon die. The results strongly suggest that films with greater 4-fold bonding character (more diamond-like) are more resistant to in vivo fragmentation than films with higher 3-fold character (more graphitic).

Fabrication and biocompatibility of polypyrrole implants suitable for neural prosthetics.

Finding a conductive substrate that promotes neural interactions is an essential step for advancing neural interfaces. The biocompatibility and conductive properties of polypyrrole (PPy) make it an attractive substrate for neural scaffolds, electrodes, and devices. Stand-alone polymer implants also provide the additional advantages of flexibility and biodegradability. To examine PPy biocompatibility, dissociated primary cerebral cortical cells were cultured on PPy samples that had been doped with polystyrene-sulfonate (PSS) or sodium dodecylbenzenesulfonate (NaDBS). Various conditions were used for electrodeposition to produce different surface properties. Neural networks grew on all of the PPy surfaces. PPy implants, consisting of the same dopants and conditions, were surgically implanted in the cerebral cortex of the rat. The results were compared to stab wounds and Teflon implants of the same size. Quantification of the intensity and extent of gliosis at 3- and 6-week time points demonstrated that all versions of PPy were at least as biocompatible as Teflon and in fact performed better in most cases. In all of the PPy implant cases, neurons and glial cells enveloped the implant. In several cases, neural tissue was present in the lumen of the implants, allowing contact of the brain parenchyma through the implants.

Hydrated/dehydrated lipid phase transitions measured using nanocalorimetry.

The phase transition evolution with hydration of a model system, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), was investigated with a fast nanocalorimetry system. Using nanocalorimetry, it is possible to measure the gel to liquid phase transitions that occur on millisecond to second time scales and quantify the time to recover the hydrated state. The results show the phase transition occurring in a few milliseconds and the relaxation or recovery time from the dehydrated state back to original hydrated state occurring with times dependent on the local humidity. With relative humidity (RH) of 43% or higher, the recovery time can be less than a few seconds. With RH of 11% or lower, the recovery time is extended to greater than a minute. The recovery process is controlled by mechanisms that depend on the lipid molecular repacking and water transport from the environment. Nanocalorimetry provides a powerful method to investigate the kinetics of such transformations in lipids and other biological and pharmaceutical moieties.

Combining nanocalorimetry and dynamic transmission electron microscopy for in situ characterization of materials processes under rapid heating and cooling.

Nanocalorimetry is a chip-based thermal analysis technique capable of analyzing endothermic and exothermic reactions at very high heating and cooling rates. Here, we couple a nanocalorimeter with an extremely fast in situ microstructural characterization tool to identify the physical origin of rapid enthalpic signals. More specifically, we describe the development of a system to enable in situ nanocalorimetry experiments in the dynamic transmission electron microscope (DTEM), a time-resolved TEM capable of generating images and electron diffraction patterns with exposure times of 30 ns-500 ns. The full experimental system consists of a modified nanocalorimeter sensor, a custom-built in situ nanocalorimetry holder, a data acquisition system, and the DTEM itself, and is capable of thermodynamic and microstructural characterization of reactions over a range of heating rates (10(2) K/s-10(5) K/s) accessible by conventional (DC) nanocalorimetry. To establish its ability to capture synchronized calorimetric and microstructural data during rapid transformations, this work describes measurements on the melting of an aluminum thin film. We were able to identify the phase transformation in both the nanocalorimetry traces and in electron diffraction patterns taken by the DTEM. Potential applications for the newly developed system are described and future system improvements are discussed.

Calcium signaling is gated by a mechanical threshold in three-dimensional environments.

Cells interpret their mechanical environment using diverse signaling pathways that affect complex phenotypes. These pathways often interact with ubiquitous 2(nd)-messengers such as calcium. Understanding mechanically-induced calcium signaling is especially important in fibroblasts, cells that exist in three-dimensional fibrous matrices, sense their mechanical environment, and remodel tissue morphology. Here, we examined calcium signaling in fibroblasts using a minimal-profile, three-dimensional (MP3D) mechanical assay system, and compared responses to those elicited by conventional, two-dimensional magnetic tensile cytometry and substratum stretching. Using the MP3D system, we observed robust mechanically-induced calcium responses that could not be recreated using either two-dimensional technique. Furthermore, we used the MP3D system to identify a critical displacement threshold governing an all-or-nothing mechanically-induced calcium response. We believe these findings significantly increase our understanding of the critical role of calcium signaling in cells in three-dimensional environments with broad implications in development and disease.

Synthetic protocells interact with viral nanomachinery and inactivate pathogenic human virus.

We present a new antiviral strategy and research tool that could be applied to a wide range of enveloped viruses that infect human beings via membrane fusion. We test this strategy on two emerging zoonotic henipaviruses that cause fatal encephalitis in humans, Nipah (NiV) and Hendra (HeV) viruses. In the new approach, artificial cell-like particles (protocells) presenting membrane receptors in a biomimetic manner were developed and found to attract and inactivate henipavirus envelope glycoprotein pseudovirus particles, preventing infection. The protocells do not accumulate virus during the inactivation process. The use of protocells that interact with, but do not accumulate, viruses may provide significant advantages over current antiviral drugs, and this general approach may have wide potential for antiviral development.

Synthetic protocells to mimic and test cell function.

Synthetic protocells provide a new means to probe, mimic and deconstruct cell behavior; they are a powerful tool to quantify cell behavior and a useful platform to explore nanomedicine. Protocells are not simple particles; they mimic cell design and typically consist of a stabilized lipid bilayer with membrane proteins. With a finite number of well characterized components, protocells can be designed to maximize useful outputs. Energy conversion in cells is an intriguing output; many natural cells convert transmembrane ion gradients into electricity by membrane-protein regulated ion transport. Here, a synthetic cell system comprising two droplets separated by a lipid bilayer is described that functions as a biological battery. The factors that affect its electrogenic performance are explained and predicted by coupling equations of the electrodes, transport proteins and membrane behavior. We show that the output of such biological batteries can reach an energy density of 6.9 x 10(6) J m(-3), which is approximately 5% of the volumetric energy density of a lead-acid battery. The configuration with maximum power density has an energy conversion efficiency of 10%.

Self-assembled gold nanoparticle molecular probes for detecting proteolytic activity in vivo.

Target-activatable fluorogenic probes based on gold nanoparticles (AuNPs) functionalized with self-assembled heterogeneous monolayers of dye-labeled peptides and poly(ethylene glycol) have been developed to visualize proteolytic activity in vivo. A one-step synthesis strategy that allows simple generation of surface-defined AuNP probe libraries is presented as a means of tailoring and evaluating probe characteristics for maximal fluorescence enhancement after protease activation. Optimal AuNP probes targeted to trypsin and urokinase-type plasminogen activator required the incorporation of a dark quencher to achieve 5- to 8-fold signal amplification. These probes exhibited extended circulation time in vivo and high image contrast in a mouse tumor model.