RESUMO
Two-dimensional (2D) MXenes stand out as promising platforms for surface-enhanced Raman scattering (SERS) sensing owing to their metallic feature, various compositions, high surface area, compatibility with functionalization, and ease of fabrication. In this work, we report a high-performance 2D titanium carbonitride (Ti3CN) MXene SERS substrate. We reveal that the abundant electronic density of states near the Fermi level of Ti3CN MXene boosts the efficiency of photo-induced charge transfer at the interface of Ti3CN/molecule, resulting in significant Raman enhancement. The SERS sensitivity of Ti3CN MXene is further promoted through a 2D morphology regulation and molecular enrichment strategies. Moreover, prohibited drugs are detectable on this substrate, presenting the potential of trace-amount analysis on Ti3CN MXene. This work provides a deep insight of the SERS mechanisms of Ti3CN MXene and broadens the practical application of transition metal carbonitride MXene SERS substrates.
RESUMO
As a powerful analytical tool of molecular detection, surface-enhanced Raman spectroscopy (SERS) has attracted great attention in varied fields. However, it has seriously impeded the development of SERS that the preparation process is generally complicated and traditional substrates lack eco-friendliness, economy and flexibility. Herein, we fabricated the inkjet-printed paper-based semiconducting SERS substrates for the first time via an inexpensive office inkjet printer with representative two-dimensional MoO3-x nanosheets ink. Compared with conventional substrates, these paper-based semiconducting substrates not only could meet the requirements of simple and large-scale preparation, but also realize efficient sample collection by merely swabbing the surface. We obtained the detection limit concentration of rhodamine 6G as low as 10-7 M. Furthermore, these flexible paper-based substrates were successfully applied to detect crystal violet and malachite green on the fish surface by swabbing. With immense potentiality in practical applications, the inkjet-printed paper-based semiconducting SERS substrates are expected to open a new prospect for SERS.
RESUMO
Nano/submicro vanadium dioxide rods in monoclinic phase (VO2 (M)) were synthesized through hydrothermal reaction combined with subsequent calcinations. The morphology and structure of samples were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The average diameter of VO2 (M) dioxide rods from 210 nm to 1 µm were successfully controlled by adjusting the synthesis conditions including the concentration of Vanadium pentoxide (V2O5) solution and the molar ratio of V2O5 and oxalic acid. Our results reveal that the concentration of V2O5 is the key factor to determine the diameter of VO2 (M) rods, while higher molar ratio favors formation of VO2 rods with narrow diameter distributions. The growth mechanism of vanadium dioxide rods was discussed.
RESUMO
Surface-enhanced Raman spectroscopy (SERS) is an ultrasensitive surface analysis technique that is widely used in chemical sensing, bioanalysis, and environmental monitoring. The design of the SERS substrates is crucial for obtaining high-quality SERS signals. Recently, 2D transition metal dichalcogenides (2D TMDs) have emerged as high-performance SERS substrates due to their superior stability, ease of fabrication, biocompatibility, controllable doping, and tunable bandgaps and excitons. In this review, a systematic overview of the latest advancements in 2D TMDs SERS substrates is provided. This review comprehensively summarizes the candidate 2D TMDs SERS materials, elucidates their working principles for SERS, explores the strategies to optimize their SERS performance, and highlights their practical applications. Particularly delved into are the material engineering strategies, including defect engineering, alloy engineering, thickness engineering, and heterojunction engineering. Additionally, the challenges and future prospects associated with the development of 2D TMDs SERS substrates are discussed, outlining potential directions that may lead to significant breakthroughs in practical applications.
RESUMO
As an emerging class of two-dimensional (2D) materials, MBenes show enormous potential for optoelectronic applications. However, their use in molecular sensing as surface-enhanced Raman scattering (SERS)-active material is unknown. Herein, for the first time, we develop a brand-new high-performance MBene SERS platform. Ordered vacancy-triggered highly sensitive SERS platform with outstanding signal uniformity based on a 2D Mo4/3B2 MBene material was designed. The 2D Mo4/3B2 MBene presented superior SERS activity to most of the semiconductor SERS substrates, showing a remarkable Raman enhancement factor of 3.88 × 106 and an ultralow detection limit of 1 × 10-9 M. The underlying SERS mechanism is revealed from systematic experiments and density functional theory calculations that the ultrahigh SERS sensitivity of 2D Mo4/3B2 MBene is derived from the efficient photoinduced charge transfer process between MBene substrates and adsorbed molecules. The abundant electronic density of states near the Fermi level of 2D Mo4/3B2 MBene enables its Raman enhancement by a factor of 100 000 times higher than that of the bulk MoB. Consequently, the 2D Mo4/3B2 MBene could accurately detect various trace chemical analytes. Moreover, with ordered metal vacancies in the 2D Mo4/3B2 MBene, uniform charge transfer sites are formed, resulting in an outstanding signal uniformity with a relative standard deviation down to 6.0%. This work opens up a new horizon for the high-performance SERS platform based on MBene materials, which holds great promise in the field of chemical sensing.
RESUMO
With the growing development of the Internet of things, wearable electronic devices have been extensively applied in civilian and military fields. As an essential component of data transmission in wearable electronics, a flexible antenna is one of the key aspects of research. Conventional metal antennas suffer from a large skin depth, and cannot satisfy the requirements of wearable electronics such as light weight, flexibility, and thinness. Recently, a group of two-dimensional metallic metal carbides (named MXenes) have been explored as building blocks for high-performance flexible antennas with excellent flexibility and superior mechanical strength. The appearance of hydrophilic functional groups at the surface of a MXene allows simple, scalable, and environmentally friendly manufacturing of MXene-based antennas. In this minireview, some pioneering works of MXene-based flexible radio frequency components are summarized, and the existing bottlenecks and the future trends of this promising field are discussed.
RESUMO
Two-dimensional (2D) MXene materials have attracted broad interest in surface-enhanced Raman scattering (SERS) applications by virtue of their abundant surface terminations and excellent photoelectric properties. Herein, we propose to design highly sensitive MXene-based SERS membranes by integrating a 2D downsizing strategy with molecular enrichment approaches. Two types of 2D vanadium carbide (V4C3 and V2C) MXenes are demonstrated for ultrasensitive SERS sensing, and corresponding SERS mechanisms including the effect of 2D vanadium carbide thickness on their electron density states and interfacial photoinduced charge transfer resonance were discussed. A 2D downsizing strategy authorizes nonplasmonic SERS detection with a sensitivity of 1 × 10-7 M. Moreover, the performance can be further upgraded by vacuum-assisted filtration, which enables an ultrarapid molecular enrichment (within 2 min), ultrahigh molecular removal rate (over 95%), and improved sensitivity (5 × 10-9 M). This work may shed light on the MXene-based materials as an innovative platform for nonplasmonic SERS detection.
RESUMO
Efficient photoinduced charge transfer (PICT) resonance is crucial to the surface-enhanced Raman scattering (SERS) performance of metal oxide substrates. Herein, we venture into the hot-electron injection strategy to achieve unprecedented enhanced PICT efficiency between substrates and molecules. A heterojunction array composed of plasmonic MoO2 and semiconducting WO3-x is designed to prove the concept. The plasmonic MoO2 generates intense localized surface plasmon resonance under illumination, which can generate near-field Raman enhancement as well as accompanied plasmon-induced hot-electrons. The hot-electron injection in direct interfacial charge transfer and plasmon-induced charge transfer process can effectively promote the PICT efficiency between substrates and molecules, achieving a record Raman enhancement factor among metal oxide substrates (2.12 × 108) and the ultrasensitive detection of target molecule down to 10-11 M. This work demonstrates the possibility of hot-electron manipulation to realize unprecedented Raman enhancement in metal oxides, offering a cutting-edge strategy to design high-performance SERS substrates.