RESUMO
The electrochemical CO2 reduction reaction (CO2RR) using Cu-based catalysts holds great potential for producing valuable multi-carbon products from renewable energy. However, the chemical and structural state of Cu catalyst surfaces during the CO2RR remains a matter of debate. Here, we show the structural evolution of the near-surface region of polycrystalline Cu electrodes under in situ conditions through a combination of grazing incidence X-ray absorption spectroscopy (GIXAS) and X-ray diffraction (GIXRD). The in situ GIXAS reveals that the surface oxide layer is fully reduced to metallic Cu before the onset potential for CO2RR, and the catalyst maintains the metallic state across the potentials relevant to the CO2RR. We also find a preferential surface reconstruction of the polycrystalline Cu surface toward (100) facets in the presence of CO2. Quantitative analysis of the reconstruction profiles reveals that the degree of reconstruction increases with increasingly negative applied potentials, and it persists when the applied potential returns to more positive values. These findings show that the surface of Cu electrocatalysts is dynamic during the CO2RR, and emphasize the importance of in situ characterization to understand the surface structure and its role in electrocatalysis.
RESUMO
In situ characterization of electrochemical systems can provide deep insights into the structure of electrodes under applied potential. Grazing-incidence X-ray diffraction (GIXRD) is a particularly valuable tool owing to its ability to characterize the near-surface structure of electrodes through a layer of electrolyte, which is of paramount importance in surface-mediated processes such as catalysis and adsorption. Corrections for the refraction that occurs as an X-ray passes through an interface have been derived for a vacuum-material interface. In this work, a more general form of the refraction correction was developed which can be applied to buried interfaces, including liquid-solid interfaces. The correction is largest at incidence angles near the critical angle for the interface and decreases at angles larger and smaller than the critical angle. Effective optical constants are also introduced which can be used to calculate the critical angle for total external reflection at the interface. This correction is applied to GIXRD measurements of an aqueous electrolyte-Pd interface, demonstrating that the correction allows for the comparison of GIXRD measurements at multiple incidence angles. This work improves quantitative analysis of d-spacing values from GIXRD measurements of liquid-solid systems, facilitating the connection between electrochemical behavior and structure under in situ conditions.
RESUMO
The rational improvement of current and developing electrochemical technologies requires atomistic understanding of electrode-electrolyte interfaces. However, examining these interfaces under operando conditions, where performance is typically evaluated and benchmarked, remains challenging, as it necessitates incorporating an operando probe during full electrochemical operation. In this study, we describe a custom electrochemical flow cell that enables near-surface-sensitive operando investigation of planar thin-film catalysts at significant hydrogen evolution reaction (HER) rates (in excess of -100 mA cm-2) using grazing incidence X-ray methods. Grazing-incidence X-ray spectroscopy and diffraction were implemented on the same sample under identical HER conditions, demonstrating how the combined measurements track changing redox chemistry and structure of Cu thin-film catalyst surfaces as a function of electrochemical conditions. The coupling of these methods with improved mass transport and hydrodynamic control establishes a new paradigm for operando measurement design, enabling unique insights into the key fundamental processes occurring at the catalyst-electrolyte interface.
RESUMO
The photoelectrochemical splitting of water into hydrogen and oxygen requires a semiconductor to absorb light and generate electron-hole pairs, and a catalyst to enhance the kinetics of electron transfer between the semiconductor and solution. A crucial question is how this catalyst affects the band bending in the semiconductor, and, therefore, the photovoltage of the cell. We introduce a simple and inexpensive electrodeposition method to produce an efficient n-Si/SiOx/Co/CoOOH photoanode for the photoelectrochemical oxidation of water to oxygen. The photoanode functions as a solid-state, metal-insulator-semiconductor photovoltaic cell with spatially non-uniform barrier heights in series with a low overpotential water-splitting electrochemical cell. The barrier height is a function of the Co coverage; it increases from 0.74 eV for a thick, continuous film to 0.91 eV for a thin, inhomogeneous film that has not reached coalescence. The larger barrier height leads to a 360 mV photovoltage enhancement relative to a solid-state Schottky barrier.
RESUMO
PURPOSE: To assess the impact of lens-free intervals of varying lengths on end-of-day comfort with soft contact lenses. METHODS: Twenty-five symptomatic lens wearers participated in this randomized, cross-over study involving nine individual 12-hour days: one spectacle (no lens) and eight lens wear days. On each lens wear day, lenses were worn bilaterally in 2-hour intervals, separated by lens-free (recovery) periods of 0, 30, 60, or 80 minutes (repeated throughout the day). For each 2-hour lens wear interval, new lenses were worn. Ocular comfort was rated on a 0 to 100 visual analogue scale (0 = extremely uncomfortable); tear film and ocular parameters were assessed at the beginning and end of each study day. This study involved two different types of silicone hydrogel lenses, and the order of lens type and length of recovery period was randomized. Participants were unaware of the true study purpose and that a new lens pair was used for each lens wear interval. RESULTS: End-of-day comfort on lens wear days was significantly worse than on the spectacle day (p < 0.002). There was no significant effect of the recovery periods on end-of-day comfort (p > 0.05). Although lens wear affected noninvasive tear film break-up time and conjunctival staining, there were no effects of recovery period length on noninvasive tear film break-up time (p > 0.05), tear meniscus height (p > 0.05), corneal staining (p > 0.05), conjunctival staining (p > 0.05), bulbar conjunctival redness (p > 0.05), or limbal redness (p > 0.05). There was no consistent effect of recovery period length on lid margin staining. CONCLUSIONS: Lens-free recovery periods during a 12-hour lens wear day did not positively impact end-of-day comfort in this study. Cumulative lens wear times ranged from 8 to 12 hours, and the results suggest that once the length of lens wear exceeds the usual comfortable wear time, there is no benefit of short recovery periods.
Assuntos
Lentes de Contato Hidrofílicas/estatística & dados numéricos , Fenômenos Fisiológicos Oculares , Conforto do Paciente , Recuperação de Função Fisiológica/fisiologia , Visão Ocular/fisiologia , Adulto , Estudos Cross-Over , Feminino , Humanos , Masculino , Estudos Prospectivos , Lágrimas/fisiologia , Fatores de Tempo , Adulto JovemRESUMO
Alloying is a powerful tool that can improve the electrocatalytic performance and viability of diverse electrochemical renewable energy technologies. Herein, we enhance the activity of Pd-based electrocatalysts via Ag-Pd alloying while simultaneously lowering precious metal content in a broad-range compositional study focusing on highly comparable Ag-Pd thin films synthesized systematically via electron-beam physical vapor co-deposition. Cyclic voltammetry in 0.1 M KOH shows enhancements across a wide range of alloys; even slight alloying with Ag (e.g. Ag0.1Pd0.9) leads to intrinsic activity enhancements up to 5-fold at 0.9 V vs. RHE compared to pure Pd. Based on density functional theory and x-ray absorption, we hypothesize that these enhancements arise mainly from ligand effects that optimize adsorbate-metal binding energies with enhanced Ag-Pd hybridization. This work shows the versatility of coupled experimental-theoretical methods in designing materials with specific and tunable properties and aids the development of highly active electrocatalysts with decreased precious-metal content.