Di-benzoquinone Cyclopentadithiophene Diradicaloids Show Spin-States Optical Transitions and Anomalous NIR Emission.

We have prepared a series of bis(semiquinone) compounds with dithiophene bridges of different length that evolve from closed-shell to full diradical character on the basis of the narrow singlet-triplet energy gaps which allows the triplet population at 298 K for the longer compound. The medium size compound has a variety of photonic properties with absorptions and emission in the true NIR region mediated by a unique case of antikasha emission. A whole set of optical absorption and emission steady state and pico-second transient absorption spectroscopies together with vibrational spectroscopies, spectroelectrochemistry and theoretical calculations have been carried our and subsequently interpreted.

Formation and Photoinduced Electron Transfer in Porphyrin- and Phthalocyanine-Bearing N-Doped Graphene Hybrids Synthesized by Click Chemistry.

Graphene doped with heteroatoms such as nitrogen, boron, and phosphorous by replacing some of the skeletal carbon atoms is emerging as an important class of two-dimensional materials as it offers the much-needed bandgap for optoelectronic applications and provides better access for chemical functionalization at the heteroatom sites. Covalent grafting of photosensitizers onto such doped graphenes makes them extremely useful for light-induced applications. Herein, we report the covalent functionalization of N-doped graphene (NG) with two well-known electron donor photosensitizers, namely, zinc porphyrin (ZnP) and zinc phthalocyanine (ZnPc), using the simple click chemistry approach. Covalent attachment of ZnP and ZnPc at the N-sites of NG in NG-ZnP and NG-ZnPc hybrids was confirmed by using a range of spectroscopic, thermogravimetric and imaging techniques. Ground- and excited-state interactions in NG-ZnP and NG-ZnPc were monitored by using spectral and electrochemical techniques. Efficient quenching of photosensitizer fluorescence in these hybrids was observed, and the relatively easier oxidations of ZnP and ZnPc supported excited-state charge-separation events. Photoinduced charge separation in NG-ZnP and NG-ZnPc hybrids was confirmed by using the ultrafast pump-probe technique. The measured rate constants were of the order of 1010  s,-1 thus indicating ultrafast electron transfer phenomena.

Self-Assembly-Directed Organization of a Fullerene-Bisporphyrin into Supramolecular Giant Donut Structures for Excited-State Charge Stabilization.

Functional materials composed of spontaneously self-assembled electron donor and acceptor entities capable of generating long-lived charge-separated states upon photoillumination are in great demand as they are key in building the next generation of light energy harvesting devices. However, creating such well-defined architectures is challenging due to the intricate molecular design, multistep synthesis, and issues associated in demonstrating long-lived electron transfer. In this study, we have accomplished these tasks and report the synthesis of a new fullerene-bis-Zn-porphyrin e-bisadduct by tether-directed functionalization of C60 via a multistep synthetic protocol. Supramolecular oligomers were subsequently formed involving the two porphyrin-bearing arms embracing a fullerene cage of the vicinal molecule as confirmed by MALDI-TOF spectrometry and variable temperature NMR. In addition, the initially formed worm-like oligomers are shown to evolve to generate donut-like aggregates by AFM monitoring that was also supported by theoretical calculations. The final supramolecular donuts revealed an inner cavity size estimated as 23 nm, close to that observed in photosynthetic antenna systems. Upon systematic spectral, computational, and electrochemical studies, an energy level diagram was established to visualize the thermodynamic feasibility of electron transfer in these donor-acceptor constructs. Subsequently, transient pump-probe spectral studies covering the wide femtosecond-to-millisecond time scale were performed to confirm the formation of long-lived charge-separated states. The lifetime of the final charge-separated state was about 40 µs, thus highlighting the significance of the current approach of building giant self-organized donor-acceptor assemblies for light energy harvesting applications.

Cycloaddition of Nitrile Oxides to Graphene: a Theoretical and Experimental Approach.

Density functional theory (DFT) studies of the interaction between graphene sheets and nitrile oxides have proved the feasibility of the reaction through 1,3-dipolar cycloaddition. The viability of the approach has been also confirmed experimentally through the cycloaddition of few-layer exfoliated graphene and nitrile oxides containing functional organic groups with different electronic nature. The cycloaddition reaction has been successfully achieved in one-pot from the corresponding oximes under microwave (MW) irradiation. The successful formation of the isoxazoline ring has been confirmed by Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS).

[All]-S,S-dioxide Oligo-Thienylenevinylenes: Synthesis and Structural/Electronic Shapes from Their Molecular Force Fields.

Oligo-S,S-dioxothienylenevinylenes have been prepared by transferring oxygen atoms to the sulfur atoms using the HOF⋅CH3 CN complex. Their photophysical properties are presented in comparison with their thiophenevinylene congeners. Together with their vibrational properties and molecular force fields, this study allows for the interpretation of the alteration of aromaticity and inter-ring exocyclic π-conjugation in this series.

Oligothienylenevinylene Polarons and Bipolarons Confined between Electron-Accepting Perchlorotriphenylmethyl Radicals.

A detailed analysis is undertaken of positively charged species generated on a series of thienylenevinylene (nTV) wires terminally substituted with two perchlorotriphenylmethyl (. PTM) radical acceptor groups, . PTM-nTV-PTM. (n=2-7). Motivated by the counterintuitive key role played by holes in the nTV bridges on the operating mechanism of electron transfer in their radical anion mixed-valence derivatives, a wide combination of experimental and theoretical techniques is used, with the aim of gaining further insights into their structural location. Consequently, contributions of the . PTM units for the stabilization of the radical cations and hole localization, particularly in the case of the shortest molecular wire, are probed. In this sense, the formation of quinoidal ring segments, resulting from the coupling of the unpaired electron of the . PTM radical site with those generated along the nTV chains is found. Additionally, open-shell dications, described by the recovery of the central aromaticity and two terminal quinoidal segments, assisted by the . PTM units, are detected.

Operative Mechanism of Hole-Assisted Negative Charge Motion in Ground States of Radical-Anion Molecular Wires.

Charge transfer/transport in molecular wires over varying distances is a subject of great interest. The feasible transport mechanisms have been generally accounted for on the basis of tunneling or superexchange charge transfer operating over small distances which progressively gives way to hopping transport over larger distances. The underlying molecular sequential steps that likely take place during hopping and the operative mechanism occurring at intermediate distances have received much less attention given the difficulty in assessing detailed molecular-level information. We describe here the operating mechanisms for unimolecular electron transfer/transport in the ground state of radical-anion mixed-valence derivatives occurring between their terminal perchlorotriphenylmethyl/ide groups through thiophene-vinylene oligomers that act as conjugated wires of increasing length up to 53 Å. The unique finding here is that the net transport of the electron in the larger molecular wires is initiated by an electron-hole dissociation intermediated by hole delocalization (conformationally assisted and thermally dependent) forming transient mobile polaronic states in the bridge that terminate by an electron-hole recombination at the other wire extreme. On the contrary, for the shorter radical-anions our results suggest that a flickering resonance mechanism which is intermediate between hopping and superexchange is the operative one. We support these mechanistic interpretations by applying the pertinent biased kinetic models of the charge/spin exchange rates determined by electron paramagnetic resonance and by molecular structural level information obtained from UV-vis and Raman spectroscopies and by quantum chemical modeling.

Efficient Photoinduced Energy and Electron Transfer in ZnII -Porphyrin/Fullerene Dyads with Interchromophoric Distances up to 2.6†nm and No Wire-like Connectivity.

The dyads 1-3 made of an alkynylated ZnII -porphyrin and a bis-methanofullerene derivative connected through a copper-catalyzed azide-alkyne cycloaddition have been synthesized. The porphyrin and fullerene chromophores are separated through a bridge made of a bismethanofullerene tether linked to different spacers conjugated to the porphyrin moiety [i.e., m-phenylene (1), p-phenylene (2), di-p-phenylene-ethynylene (3)]. Compounds 1-3 exhibit relatively rigid structures with an interchromophoric separation of 1.7, 2.0, and 2.6 nm, respectively, and no face-to-face or direct through-bond conjugation. The photophysical properties of compounds 1-3 have been investigated in toluene and benzonitrile with steady-state and time-resolved techniques as well as model calculations on the Förster energy transfer. Excited-state interchromophoric electronic interactions are observed with a distinct solvent and distance dependence. The latter effect is evidenced in benzonitrile, where compounds 1 and 2 exhibit a photoinduced electron transfer in the Marcus-inverted region, with charge-separated (CS) states living for 0.44 and 0.59 µs, respectively, whereas compound 3 only undergoes energy transfer, as in apolar toluene. The quantum yield of the charge separation (φCS ) of compounds 1 and 2 in benzonitrile is ≥0.75. It is therefore demonstrated that photoinduced energy and electron transfers in porphyrin-fullerene systems with long interchromophoric distances may efficiently occur also when the bridge does not provide a wire-like conjugation and proceed through the triplet states of the chromophoric moieties.

Cyclopentadithiophene organic core in small molecule organic solar cells: morphological control of carrier recombination.

Two new planar and symmetrical A-D-A (electron acceptor-electron donor-electron acceptor) small molecules based on a commercial cyclopentadithiophene derivative have been synthesized for solution processed small molecule organic solar cells. The aim was to synthesise the molecules to be energetically identical (similar HOMO-LUMO energy levels) in order to assign the differences observed to changes in the film morphology or to differences in the interfacial recombination kinetics or both. Devices were electrically characterized under one sun simulated (1.5 AM G) conditions by determining current-voltage curves, light harvesting efficiencies and external quantum efficiencies. Moreover, time-resolved photo-induced techniques such as photo-induced charge extraction and photo-induced transient photo-voltage were also performed. The results demonstrate that, despite having the same core, i.e. cyclopentadithiophene, the use of one hexyl chain instead of two in the organic molecule leads to a greater control of the molecular ordering using solvent vapour annealing techniques and also to better solar cell efficiency.

Synthesis, characterization and photoinduced charge separation of carbon nanohorn-oligothienylenevinylene hybrids.

The covalent coupling between oligo(thienylenevinylenes) (nTVs) and carbon nanohorns (CNHs) has been investigated. The resulting nanohybrids have been characterized by a combination of several techniques, including thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HR-TEM) and Raman spectroscopy. The photophysical properties of the new hybrids were investigated by steady-state and time-resolved spectroscopic techniques. A transient signal characterized by two kinetic regimes, one short decay within 0.5 µs corresponding to around 80% of the total signal and another much longer-lived decay of 10 µs, has been detected. The transient absorption spectra are characterized by a continuous absorption that increases in intensity towards shorter wavelengths, with a maximum at 430 nm. These transient signals have been assigned to the charge-separated state delocalized on CNHs based on the quenching behavior and by comparison with the photophysical properties of nTV in the absence and presence of quenchers. The photophysical behavior of covalent nTV-CNH conjugates with microsecond transients due to electrons and holes on CNHs contrasts with the absence of any transient for analogous nTV-C60 conjugates, for which charge separation was not observed at timescales longer than nanoseconds. The photochemical behavior of CNHs is believed to derive from the amphoteric (electron donor and acceptor) properties of CNHs and from the larger number of carbon atoms (efficient delocalization) in CNHs compared with C60.

Heteroleptic Ru(ii)-bipyridine complexes based on hexylthioether-, hexyloxy- and hexyl-substituted thienylenevinylenes and their application in dye-sensitized solar cells.

A series of eight Ru(ii) heteroleptic complexes incorporating an ancillary [2,2']bipyridine functionalised at the [4,4'] positions with one (-type) or two (-type) thienylenevinylenes (nTVs, n = 2 or 4) is reported. Three types of substitutions have been used for nTVs: hexylthioether, hexyloxy and hexyl. The characterisation of the half-sandwich intermediates and final complexes is provided. In particular, the half-sandwich complexes in the -type series are obtained as a racemate, whereas the heteroleptic complexes consist of two regioisomers. Finally, these complexes have been tested as dyes in dye-sensitized solar cells (DSSCs). Counterintuitively, better performances were obtained for -type complexes with shorter 2TV moieties. The best performing dye was the Ru(ii) complex mono-functionalized with a 2TV moiety having an hexylthioether substitution (), which achieved a maximum power efficiency of 2.77% under full sun illumination (AM1.5G standard conditions). The structure-performance relationship in DSSCs is discussed based on photovoltaic and electrochemical data and DFT-calculations.

Modulation of the exfoliated graphene work function through cycloaddition of nitrile imines.

After the feasibility of the 1,3-dipolar cycloaddition reaction between nitrile imines and exfoliated graphene by density functional theory calculations was proved, very few-layer graphene was effectively functionalized using this procedure. Hydrazones with different electronic properties were used as precursors for the 1,3-dipoles, and microwave irradiation as an energy source enabled the reaction to be performed in a few minutes. The anchoring of organic addends on the graphene surface was confirmed by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis. Ultraviolet photoelectron spectroscopy (UPS) was used to measure the work function and band gap of these new hybrids. Our results demonstrate that it is possible to modulate these important electronic valence band parameters by tailoring the electron richness of the organic addends and/or the degree of functionalization.

Robust ethylenedioxythiophene-vinylene oligomers from fragile thiophene-vinylene cores: synthesis and optical, chemical and electrochemical properties of multicharged shapes.

Oligomers of ethylendioxythiophene-vinylene have been prepared. Their optical, electrochemical and chemical properties have been studied in detail by absorption and emission spectroscopy as well as cyclic voltammetry, Raman techniques and spectroelectrochemistry complemented with quantum chemical calculations. A comparison with their non-ethylendioxy and non-vinylene parents has been done. The inclusion of the EDO plus the vinylene function generates more robust electronic ground states regarding the largely flexible thiophene-vinylene (n TV) oligomeric homologues. The redox features of the new compounds are also rich of oxidative processes arising as an interesting stabilising balance effect between the oxygen fragment in the EDO groups (mesomeric effect) and the linear π-conjugated structure. The oxidised species have been characterised, which show the ability for the formation of mixed valence charge-transfer complexes and π dimers of different oxidation states, in particular, in the electrochemical medium, resulting that the electrochemical response is accounted for a succession of aggregation and electron-transfer steps. With this work, a full understanding of the optical and electronic properties of these new oligomers in the context of the oligomer approach has been proposed.

Role of the bridge in photoinduced electron transfer in porphyrin-fullerene dyads.

The role of π-conjugated molecular bridges in through-space and through-bond electron transfer is studied by comparing two porphyrin-fullerene donor-acceptor (D-A) dyads. One dyad, ZnP-Ph-C60 (ZnP = zinc porphyrin), incorporates a phenyl bridge between D and A and behaves very similarly to analogous dyads studied previously. The second dyad, ZnP-EDOTV-C60, introduces an additional 3,4-ethylenedioxythienylvinylene (EDOTV) unit into the conjugated bridge, which increases the distance between D and A, but, at the same time, provides increased electronic communication between them. Two essential outcomes that result from the introduction of the EDOTV unit in the bridge are as follows: 1) faster charge recombination, which indicates enhanced electronic coupling between the charge-separated and ground electronic states; and 2) the disappearance of the intramolecular exciplex, which mediates photoinduced charge separation in the ZnP-Ph-C60 dyad. The latter can be interpreted as a gradual decrease in electronic coupling between locally excited singlet states of D and A when introducing the EDOTV unit into the D-A bridge.

Carbon nanohorns as a scaffold for the construction of disposable electrochemical immunosensing platforms. Application to the determination of fibrinogen in human plasma and urine.

We describe in this work a novel electrochemical immunosensor design making use of carbon nanohorns (CNHs) as a scaffold for the preparation of disposable immunosensing platforms for the determination of fibrinogen (Fib). The approach involved the immobilization of Fib onto activated CNHs deposited on screen-printed carbon electrodes (SPCEs) and the implementation of an indirect competitive assay using anti-Fib labeled with horseradish peroxidase (HRP) and hydroquinone (HQ) as the redox mediator. Both CNHs and the Fib-CNHs covalent assembly were characterized by microscopic and electrochemical techniques. The different variables affecting the analytical performance of the amperometric immunosensing strategy were optimized. The calibration plot for Fib allowed a range of linearity between 0.1 and 100 µg/mL (r(2) = 0.994) and a detection limit of 58 ng/mL to be achieved. The Fib-CNHs/SPCEs exhibited an excellent storage stability of at least 42 days. The developed immunosensor provides, in general, an analytical performance better than that reported for other Fib immunosensors and commercial ELISA kits. This simple and relatively low cost immunosensor configuration permitted the sensitive and selective determination of Fib in human plasma and urine.

Double-wall carbon nanotube-porphyrin supramolecular hybrid: synthesis and photophysical studies.

Double-wall carbon nanotubes (DWCNTs) with pyridyl units covalently attached to the external wall through isoxazolino linkers and carboxylic groups that have been esterified by pentyl chains are synthesized. The properties of these modified DWCNTs are then compared with an analogous sample based on single-wall carbon nanotubes (SWCNTs). Raman spectroscopy shows the presence of characteristic radial breathing mode vibrations, confirming that the samples partly retain the integrity of the nanotubes in the case of DWCNTs, including the internal and external nanotubes. Quantification of the pyridyl content for both samples (DWCNT and SWCNT derivatives) is based on X-ray photoelectron spectroscopy and thermogravimetric profiles, showing very similar substituent load. Both pyridyl-containing nanotubes (DWCNTs and SWCNTs) form a complex with zinc porphyrin (ZnP), as evidenced by the presence of two isosbestic points in the absorption spectra of the porphyrin upon addition of the pyridyl-functionalized nanotubes. Supramolecular complexes based on pyridyl-substituted DWCNTs and SWCNTs quench the emission and the triplet excited state identically, through an energy-transfer mechanism based on pre-assembly of the ground state. Thus, the presence of the intact inner wall in DWCNTs does not influence the quenching behavior, with respect to SWCNTs, for energy-transfer quenching with excited ZnP. These results sharply contrast with previous ones referring to electron-transfer quenching, in which the double-wall morphology of the nanotubes has been shown to considerably reduce the lifetime of charge separation, owing to faster electron mobility in DWCNTs compared to SWCNTs.

Photoinduced electron transfer of zinc porphyrin-oligo(thienylenevinylene)-fullerene[60] triads; thienylenevinylenes as efficient molecular wires.

Two novel donor-bridge-acceptor arrays (ZnP-nTV-C60) with zinc porphyrin (ZnP) and fullerene (C60), covalently connected by oligo(thienylenevinylene) (nTV) molecular wires (n = 3 and 8; ), have been prepared in a multistep convergent manner. The influence of the nTV-length on the electrochemical and electronic properties of the ZnP-nTV-C60 triads has been revealed. Interestingly, an efficient photoinduced electron transfer process occurs in both triads with formation of intermediate radical-ion pairs (namely, ZnP˙(+)-nTV-C60˙(-) and ZnP-nTV˙(+)-C60˙(-)) as confirmed by the nanosecond transient absorption measurements in the visible and NIR regions. In polar and nonpolar solvents, the rate constants of charge-separation processes (kCS) via(1)ZnP*-nTV-C60 were found to decrease from ca. 1.2 × 10(10) s(-1) for n = 3 (RDA = 20 Å) to (5-7) × 10(9) s(-1) for n = 8 (RDA = 60 Å) on the basis of fluorescence lifetime measurements of the ZnP moiety. From these data, together with those previously obtained ones for n = 4 in the related ZnP-nTV-C60 systems, a low attenuation coefficient was evaluated for the nTV molecular wires.

Organic Solar Cells Based on Non-Fullerene Low Molecular Weight Organic Semiconductor Molecules.

The development of narrow bandgap A-D-A- and ADA'DA-type non-fullerene small molecule acceptors (NFSMAs) along with small molecule donors (SMDs) have led to significant progress in all-small molecule organic solar cells. Remarkable power conversion efficiencies, nearing the range of 17-18 %, have been realized. These efficiency values are on par with those achieved in OSCs based on polymeric donors. The commercial application of organic photovoltaic technology requires the design of more efficient organic conjugated small molecule donors and acceptors. In recent years the precise tuning of optoelectronic properties in small molecule donors and acceptors has attracted considerable attention and has contributed greatly to the advancement of all-SM-OSCs. Several reviews have been published in this field, but the focus of this review concerns the advances in research on OSCs using SMDs and NFSMAs from 2018 to the present. The review covers the progress made in binary and ternary OSCs, the effects of solid additives on the performance of all-SM-OSCs, and the recently developed layer-by-layer deposition method for these OSCs. Finally, we present our perspectives and a concise outlook on further advances in all-SM-OSCs for their commercial application.

Effects of Halogenation on Cyclopentadithiophenevinylene-Based Acceptors with Excellent Responses in Binary Organic Solar Cells.

In recent years, non-fused non-fullerene acceptors (NFAs) have attracted increasing consideration due to several advantages, which include simple preparation, superior yield, and low cost. In the work reported here, we designed and synthesized three new NFAs with the same cyclopentadithiophenevinylene (CPDTV) trimer as the electron-donating unit and different terminal units (IC for FG10, IC-4F for FG8, and IC-4Cl for FG6). Both halogenated NFAs, i.e., FG6 and FG8, show red-shifted absorption spectra and higher electron mobilities (more pronounced for FG6) in comparison with FG10. Moreover, the dielectric constants of these materials also increased upon halogenation of the IC terminal units, thus leading to a reduction in the exciton binding energy, which is favorable for dissociation of excitons and subsequent charge transfer despite the driving force (highest occupied molecular orbital and lowest unoccupied molecular orbital offsets) being very small. The organic solar cells (OSCs) constructed using these acceptors and PBDB-T, as the donor, showed PCE values of 15.08, 12.56, and 9.04% for FG6, FG8, and FG10, respectively. The energy loss for the FG6-based device was the lowest (0.45 eV) of all the devices, and this may be attributed to it having the highest dielectric constant, which leads to a reduction in the binding energy of exciton and a small driving force for hole transfer from FG6 to PBDB-T. The results indicate that the NFA containing the CPDTV oligomer core and halogenated terminal units can efficiently spread the absorption spectrum to the NIR zone. Non-fused NFAs have a bright future in the quest to obtain efficient OSCs with low cost for marketable purposes.

p-Type Functionalized Carbon Nanohorns and Nanotubes in Perovskite Solar Cells.

The incorporation of p-type functionalized carbon nanohorns (CNHs) in perovskite solar cells (PSCs) and their comparison with p-type functionalized single- and double-walled carbon nanotubes (SWCNTs and DWCNTs) are reported in this study for the first time. These p-type functionalized carbon nanomaterial (CNM) derivatives were successfully synthesized by [2 + 1] cycloaddition reaction with nitrenes formed from triphenylamine (TPA) and 9-phenyl carbazole (Cz)-based azides, yielding CNHs-TPA, CNHs-Cz, SWCNTs-Cz, SWCNTs-TPA, DWCNTs-TPA, and DWCNTs-Cz. These six novel CNMs were incorporated into the spiro-OMeTAD-based hole transport layer (HTL) to evaluate their impact on regular mesoporous PSCs. The photovoltaic results indicate that all p-type functionalized CNMs significantly improve the power conversion efficiency (PCE), mainly by enhancing the short-circuit current density (Jsc) and fill factor (FF). TPA-functionalized derivatives increased the PCE by 12-17% compared to the control device without CNMs, while Cz-functionalized derivatives resulted in a PCE increase of 4-8%. Devices prepared with p-type functionalized CNHs exhibited a slightly better PCE compared with those based on SWCNTs and DWCNTs derivatives. The increase in hole mobility of spiro-OMeTAD, additional p-type doping, better energy alignment with the perovskite layer, and enhanced morphology and contact interface play important roles in enhancing the performance of the device. Furthermore, the incorporation of p-type functionalized CNMs into the spiro-OMeTAD layer increased device stability by improving the hydrophobicity of the layer and enhancing the hole transport across the MAPI/spiro-OMeTAD interface. After 28 days under ambient conditions and darkness, TPA-functionalized CNMs maintained the performance of the device by over 90%, while Cz-functionalized CNMs preserved it between 75 and 85%.