RESUMO
Being one of the oldest en most frequently performed invasive procedures; the lack of scientific progress of tooth removal procedures is impressive. This has most likely to do with technical limitations in measuring different aspects of these keyhole procedures. The goal of this study is to accurately capture the full range of motions during tooth removal as well as angular velocities in clinically relevant directions. An ex vivo measuring setup was designed consisting of, amongst others, a compliant robot arm. To match clinical conditions as closely as possible, fresh-frozen cadavers were used as well as regular dental forceps mounted on the robot's end-effector. Data on 110 successful tooth removal experiments are presented in a descriptive manner. Rotation around the longitudinal axis of the tooth seems to be most dominant both in range of motion as in angular velocity. Buccopalatal and buccolingual movements are more pronounced in the dorsal region of both upper and lower jaw. This study quantifies an order of magnitude regarding ranges of motion and angular velocities in tooth removal procedures. Improved understanding of these complex procedures could aid in the development of evidence-based educational material.
Assuntos
Robótica , Movimento , Arcada Osseodentária , Mandíbula , Extração DentáriaRESUMO
OBJECTIVE: Premature dental contact on the fractured side and a contralateral open bite are signs of a unilaterally fractured condyle of the temporomandibular joint (TMJ). The lateral pterygoid muscle pulls the condyle inwards, causing angulation of the fractured part and shortening of the ramus. This imbalance after fracture might change the load in both TMJs and consequently induce remodeling. The present study aimed to calculate this change in load. It is hypothesized to decrease on the fractured side and increase on the non-fractured side. DESIGN: For these calculations, a finite element model (FEM) was used. In the FEM, shortening of the ramus varied from 2 mm to 16 mm; angulation, from 6.25° to 50°. RESULTS: After fracture, load on the non-fractured side increased, but only at maximal mouth opening (MMO). Simultaneously, load on the fractured side decreased, at both timepoints, i.e., MMO and closed mouth. When comparing all simulations at those time points, i.e., from 2 mm and 6.25° to 16 mm and 50°, the load in the fractured condyle declines steadily. However, for both timepoints, a threshold stands out around 6 mm shortening and 18.75° angulation: visualization of the fractured condyle showed, apart from load on the condylar head, a second point of load more medial in the TMJ which was most evident in the 6 mm - 18.75° simulation. CONCLUSIONS: These findings could implicate that the balance between both TMJs is more difficult to restore after a fracture with more than 6 mm shortening and more than 18.75° angulation.
RESUMO
The current study aimed to explore the types and frequencies of uncommon complications associated with third molar extractions based on a scoping review of case reports and case series. The study used an electronic literature search based on PubMed and Embase up to March 31, 2020, with an update performed on October 22, 2021. Any case reports and case series that reported complications associated with third molar extractions were included. The types of complications were grouped and the main symptoms of each type of complication were summarized. A total of 51 types of uncommon complications were identified in 248 patients from 186 studies. Most types of complications were post-operative. In the craniofacial and cervical regions, the most frequent complications included iatrogenic displacement of the molars or root fragments in the craniofacial area, late mandibular fracture, and subcutaneous emphysema. In other regions, the most frequent complications include pneumomediastinum, pneumorrhachis, pneumothorax, and pneumopericardium. Of the patients, 37 patients had life-threatening uncommon complications and 20 patients had long-term/irreversible uncommon complications associated with third molar extractions. In conclusion, a variety of uncommon complications associated with third molar extractions were identified. Most complications occurred in the craniofacial and cervical regions and were mild and transient.
RESUMO
Background: Maxillomandibular advancement (MMA) has been shown to be the most effective surgical therapy for obstructive sleep apnea (OSA). Despite high success rates, there are patients who are considered as non-responders to MMA. In order to triage and inform these patients on their expected prognosis of MMA before the surgery, this study aimed to develop, internally validate, and calibrate a prediction model for the presence of surgical success for MMA in patients with OSA. Methods: A retrospective cohort study was conducted that included patients that had undergone MMA for moderate to severe OSA. Baseline clinical, polysomnographic, cephalometric, and drug-induced sleep endoscopy findings were recorded as potential predictors. Presence or absence of surgical success was recorded as outcome. Binary logistic regression analyses were conducted to develop the model. Performance and clinical values of the model were analyzed. Results: One hundred patients were included, of which sixty-seven (67%) patients reached surgical success. Anterior lower face height (ALFH) (OR: 0.93 [0.87−1.00], p = 0.05), superior posterior airway space (SPAS) (OR: 0.76 [0.62−0.92], p < 0.05), age (OR: 0.96 [0.91−1.01], p = 0.13), and a central apnea index (CAI) <5 events/hour sleep (OR: 0.16 [0.03−0.91], p < 0.05) were significant independent predictors in the model (significance level set at p = 0.20). The model showed acceptable discrimination with a shrunken area under the curve of 0.74, and acceptable calibration. The added predictive values for ruling in and out of surgical success were 0.21 and 0.32, respectively. Conclusions: Lower age at surgery, CAI < 5 events/hour, lower ALFH, and smaller SPAS were significant predictors for the surgical success of MMA. The discrimination, calibration, and clinical added values of the model were acceptable.
RESUMO
The aim of this study was to evaluate the clinical efficacy of maxillomandibular advancement (MMA) for obstructive sleep apnea (OSA) patients with a percentage of central and mixed apnea index in the total apnea-hypopnea index (CMAI%) â§25%. Patients treated with MMA for OSA were retrospectively evaluated for baseline and postoperative patient data and polysomnographic results. The pre- and postoperative obstructive, central and mixed apnea parameters were compared. Of the included 78 patients, 21 patients (27%) presented with CMAI% â§25% (median CMAI%, 49.1%; 35.9-63.8) prior to MMA. In 67% of these cases, MMA resulted in CMAI% <25 (median CMAI%, 6.1%; 2.1-8.9) and significantly improved the apnea-hypopnea index (AHI) (p < 0.001), the lowest oxyhemoglobin saturation (p < 0.001), central and mixed apnea index (p < 0.001), percentage of central and mixed apneas of total AHI (p = 0.004), central apnea index (p < 0.001), and mixed apnea index (p < 0.001). CMAI% â§25% emerged in 25% of patients after MMA (median CMAI%, 49.1%; 35.9-63.8). Within the undeniable limitations of the study, it seems that the presence of CMAI% â§25% should not be regarded as a contraindication for MMA in OSA patients.