RESUMO
The chemistry of extremely bulky amide ligands is troubled by difficulties in deprotonation of the parent amine. As an alternative route to superbulky amide reagents, the addition of polar reagents to a sila-imine has been investigated. Attempts to synthesize the superbulky amide anion (tBu3Si)2N- by addition of tBuLi to tBu2Si=N(SitBu3) failed and gave tBu3Si(tBu2HSi)NLi and isobutene. Reaction of the sila-imine with KOtBu successfully led to tBu3Si[tBu2(tBuO)Si]NK which crystallized as a separated ion-pair. Reaction with the slightly bulkier KOAd (Ad=1-adamantyl) led in presence of THF to ether ring-opening. Reaction with tBuOH gave tBu3Si[tBu2(tBuO)Si]NH but this amine cannot be easily deprotonated. Reaction with (BDI*)MgnBu in presence of THF gave (BDI*)Mg+ â (THF)2 and the non-coordinating anion tBu3Si[tBu2(nBu)Si]N-; BDI*=ß-diketiminate ligand HC[C(tBu)N-DIPP]2, DIPP=2,6-diisopropylphenyl. Reaction of Mg(nBu)2 with tBu2Si=N(SitBu3) led to a Mg complex with one amide ligand: tBu3Si[tBu2(nBu)Si]N-. The other superbulky amide anion isomerized by internal deprotonation of a tBu-substituent to give a primary carbanion that is also coordinated to Mg. Although the amide-to-carbanion isomerization is highly contrathermodynamic, it allows for coordination of both anions to a single Mg center. The new bulky amides are rare cases of halogen-free weakly coordinating anions.
RESUMO
Inverse sandwich complexes of Yb and Sm stabilized by a bulky ß-diketiminate (BDI) ligand have been prepared: (BDI)Ln(η6,η6-C6H6)Ln(BDI); Ln=lanthanide. Coordinated benzene ligands can be neutral, di-anionic or, often controversially discussed, even tetra-anionic. The formal charge on benzene is correlated to assignment of the metal oxidation state which generally poses a problem. Herein, we take advantage of the structural similarities found when comparing CaII with YbII, and SrII with SmII complexes. In this work, we found an excellent overlap of the Ca/Yb inverse sandwich structures but a striking difference for the Sr/Sm pair. The much shorter Sm-N and Sm-C6H6 distances are strong evidence for a SmIII-benzene-4-SmIII assignment. This was further supported by NMR spectroscopy, magnetic susceptibility, reactivity and comprehensive computational investigation.
RESUMO
Inversion barriers ΔG for planar chiral phosphine-alkene and sulfonamide-alkene hybrid ligands based on phenyl-dibenz[b,f]azepine have been determined by density-functional theory calculations. Analysis of the structural and electronic characteristics of the minima and transition states explains the magnitudes of ΔG and the geometrical changes during the inversion process. The steric repulsion caused by bulky substituents attached to the azepine nitrogen atom has a pronounced effect on the ΔG value, explaining, inter alia, the stereochemical stability of the P- and S-alkene ligands when compared to the fluxional parent compound where X = H.
RESUMO
Alkenes that normally do not react with LiAlH4 (3-hexene, cyclohexene, 1-Me-cyclohexene), can be reduced to the corresponding alkanes by a mixture of LiAlH4 and Fe0 (the iron was activated by Metal-Vapour-Synthesis). This alkene-to-alkane conversion with a stoichiometric quantity of LiAlH4 /Fe0 does not need quenching with water or acids, implying that both H's originate from LiAlH4 . The LiAlH4 /Fe0 combination is also a remarkably potent cooperative catalyst for hydrogenation of multi-substituted alkenes and benzene or toluene. An induction period of circa two hours and the minimally required temperature of 120 °C, suggests that the actual catalyst is a combination of Fe0 and the decomposition product of LiAlH4 (LiH and Al0 ). A thermally pre-activated LiAlH4 /Fe0 catalyst did not need an induction time and is also active at room temperature and 1â bar H2 . A combination of AliBu3 and Fe0 is an even more active hydrogenation catalyst. Without pre-activation, tetra-substituted alkenes like Me2 C=CMe2 and toluene could be fully hydrogenated.
RESUMO
Complex [(DIPeP BDI)Ca]2 (C6 H6 ), with a C6 H6 2- dianion bridging two Ca2+ ions, reacts with benzene to yield [(DIPeP BDI)Ca]2 (biphenyl) with a bridging biphenyl2- dianion (DIPeP BDI=HC[C(Me)N-DIPeP]2 ; DIPeP=2,6-CH(Et)2 -phenyl). The biphenyl complex was also prepared by reacting [(DIPeP BDI)Ca]2 (C6 H6 ) with biphenyl or by reduction of [(DIPeP BDI)CaI]2 with KC8 in presence of biphenyl. Benzene-benzene coupling was also observed when the deep purple product of ball-milling [(DIPP BDI)CaI(THF)]2 with K/KI was extracted with benzene (DIPP=2,6-CH(Me)2 -phenyl) giving crystalline [(DIPP BDI)Ca(THF)]2 (biphenyl) (52 % yield). Reduction of [(DIPeP BDI)SrI]2 with KC8 gave highly labile [(DIPeP BDI)Sr]2 (C6 H6 ) as a black powder (61 % yield) which reacts rapidly and selectively with benzene to [(DIPeP BDI)Sr]2 (biphenyl). DFT calculations show that the most likely route for biphenyl formation is a pathway in which the C6 H6 2- dianion attacks neutral benzene. This is facilitated by metal-benzene coordination.
RESUMO
Oxidative addition of 1.5 equiv of bromine or iodine to a Ir(I) sulfoxide pincer complex affords the corresponding Ir(IV) tris-bromido or tris-iodido complexes, respectively. The unprecedented trap-free reductive elimination of iodine from the Ir(IV)-iodido complex is induced by coordination of ligands or donor solvents. In the case of added I-, the isostructural tris-iodo Ir(III)-ate complex is quickly generated, which then can be readily reoxidized to the Ir(IV)-iodido complex with FcPF6 or electrochemically. DFT calculations indicate an "inverted ligand field" in the Ir(IV) complexes and favor dinuclear pathways for the reductive elimination of iodine from the formal d5 metal center.
RESUMO
In order to isolate a monometallic Mg radical, the precursor (Am)MgIâ (CAAC) (1) was prepared (Am=tBuC(N-DIPP)2 , DIPP=2,6-diisopropylphenyl, CAAC=cyclic (alkyl)(amino)carbene). Reduction of a solution of 1 in toluene with the reducing agent K/KI led to formation of a deep purple complex that rapidly decomposed. Ball-milling of 1 with K/KI gave the low-valent MgI complex (Am)Mgâ (CAAC) (2) which after rapid extraction with pentane and crystallization was isolated in 15 % yield. Although a benzene solution of 2 decomposes rapidly to give Mg(Am)2 (3) and unidentified products, the radical is stable in the solid state. Its crystal structure shows planar trigonal coordination at Mg. The extremely short Mg-C distance of 2.056(2)â Å indicates strong Mg-CAAC bonding. Calculations and EPR measurements show that most of the spin density is in a π* orbital located at the C-N bond in CAAC, leading to significant C-N bond elongation. This is supported by calculated NPA charges in 2: Mg +1.73, CAAC -0.82. Similar metal-to-CAAC charge transfer was calculated for M0 (CAAC)2 and [MI (CAAC)2 + ] (M=Be, Mg, Ca) complexes in which the metal charges range from +1.50 to +1.70. Although the spin density of the radical is mainly located at the CAAC ligand, complex 2 reacts as a low-valent MgI complex: reaction with a I2 solution in toluene gave (Am)MgIâ (CAAC) (1) as the major product.
RESUMO
Commercial LiAlH4 can be used in catalytic quantities in the hydrogenation of imines to amines with H2 . Combined experimental and theoretical investigations give deeper insight in the mechanism and identifies the most likely catalytic cycle. Activity is lost when Li in LiAlH4 is exchanged for Na or K. Exchanging Al for B or Ga also led to dramatically reduced activities. This indicates a heterobimetallic mechanism in which cooperation between Li and Al is crucial. Potential intermediates on the catalytic pathway have been isolated from reactions of MAlH4 (M=Li, Na, K) and different imines. Depending on the imine, double, triple or quadruple imine insertion has been observed. Prolonged reaction of LiAlH4 with PhC(H)=NtBu led to a side-reaction and gave the double insertion product LiAlH2 [N]2 ([N]=N(tBu)CH2 Ph) which at higher temperature reacts further by ortho-metallation of the Ph ring. A DFT study led to a number of conclusions. The most likely catalyst for hydrogenation of PhC(H)=NtBu with LiAlH4 is LiAlH2 [N]2 . Insertion of a third imine via a heterobimetallic transition state has a barrier of +23.2â kcal mol-1 (ΔH). The rate-determining step is hydrogenolysis of LiAlH[N]3 with H2 with a barrier of +29.2â kcal mol-1 . In agreement with experiment, replacing Li for Na (or K) and Al for B (or Ga) led to higher calculated barriers. Also, the AlH4 - anion showed very high barriers. Calculations support the experimentally observed effects of the imine substituents at C and N: the lowest barriers are calculated for imines with aryl-substituents at C and alkyl-substituents at N.
RESUMO
The first intermolecular early main group metal-alkene complexes were isolated. This was enabled by using highly Lewis acidic Mg centers in the Lewis base-free cations (Me BDI)Mg+ and (tBu BDI)Mg+ with B(C6 F5 )4 - counterions (Me BDI=CH[C(CH3 )N(DIPP)]2 , tBu BDI=CH[C(tBu)N(DIPP)]2 , DIPP=2,6-diisopropylphenyl). Coordination complexes with various mono- and bis-alkene ligands, typically used in transition metal chemistry, were structurally characterized for 1,3-divinyltetramethyldisiloxane, 1,5-cyclooctadiene, cyclooctene, 1,3,5-cycloheptatriene, 2,3-dimethylbuta-1,3-diene, and 2-ethyl-1-butene. In all cases, asymmetric Mg-alkene bonding with a short and a long Mg-C bond is observed. This asymmetry is most extreme for Mg-(H2 C=CEt2 ) bonding. In bromobenzene solution, the Mg-alkene complexes are either dissociated or in a dissociation equilibrium. A DFT study and AIM analysis showed that the C=C bonds hardly change on coordination and there is very little alkeneâMg electron transfer. The Mg-alkene bonds are mainly electrostatic and should be described as Mg2+ ion-induced dipole interactions.
RESUMO
Strongly Lewis acidic cationic aluminium complexes, stabilized by ß-diketiminate (BDI) ligands and free of Lewis bases, have been prepared as their B(C6 F5 )4 - salts and were investigated for catalytic activity in imine hydrogenation. The backbone (R1) and N (R2) substituents on the R1,R2 BDI ligand (R1,R2 BDI=HC[C(R1)N(R2)]2 ) influence sterics and Lewis acidity. Ligand bulk increases along the row Me,DIPP BDI
RESUMO
Low-valent (Me BDI)Al and (Me BDI)Ga and highly Lewis acidic cations in [(tBu BDI)M+ â C6 H6 ][(B(C6 F5 )4 - ] (M=Mg or Zn, Me BDI=HC[C(Me)N-DIPP]2 , tBu BDI=HC[C(tBu)N-DIPP]2 , DIPP=2,6-diisopropylphenyl) react to heterobimetallic cations [(tBu BDI)Mg-Al(Me BDI)+ ], [(tBu BDI)Mg-Ga(Me BDI)+ ] and [(tBu BDI)Zn-Ga(Me BDI)+ ]. These cations feature long Mg-Al (or Ga) bonds while the Zn-Ga bond is short. The [(tBu BDI)Zn-Al(Me BDI)+ ] cation was not formed. Combined AIM and charge calculations suggest that the metal-metal bonds to Zn are considerably more covalent, whereas those to Mg should be described as weak AlI (or GaI )âMg2+ donor bonds. Failure to isolate the Zn-Al combination originates from cleavage of the C-F bond in the solvent fluorobenzene to give (tBu BDI)ZnPh and (Me BDI)AlF+ which is extremely Lewis acidic and was not observed, but (Me BDI)Al(F)-(µ-F)-(F)Al(Me BDI)+ was verified by X-ray diffraction. DFT calculations show that the remarkably facile C-F bond cleavage follows a dearomatization/rearomatization route.
RESUMO
The reagent RK [R=CH(SiMe3 )2 or N(SiMe3 )2 ] was expected to react with the low-valent (DIPP BDI)Al (DIPP BDI=HC[C(Me)N(DIPP)]2 , DIPP=2,6-iPr-phenyl) to give [(DIPP BDI)AlR]- K+ . However, deprotonation of the Me group in the ligand backbone was observed and [H2 C=C(N-DIPP)-C(H)=C(Me)-N-DIPP]Al- K+ (1) crystallized as a bright-yellow product (73 %). Like most anionic AlI complexes, 1 forms a dimer in which formally negatively charged Al centers are bridged by K+ ions, showing strong K+ â â â DIPP interactions. The rather short Al-K bonds [3.499(1)-3.588(1)â Å] indicate tight bonding of the dimer. According to DOSY NMR analysis, 1 is dimeric in C6 H6 and monomeric in THF, but slowly reacts with both solvents. In reaction with C6 H6 , two C-H bond activations are observed and a product with a para-phenylene moiety was exclusively isolated. DFT calculations confirm that the Al center in 1 is more reactive than that in (DIPP BDI)Al. Calculations show that both AlI and K+ work in concert and determines the reactivity of 1.
RESUMO
Two series of bulky alkaline earth (Ae) metal amide complexes have been prepared: Ae[N(TRIP)2 ]2 (1-Ae) and Ae[N(TRIP)(DIPP)]2 (2-Ae) (Ae=Mg, Ca, Sr, Ba; TRIP=SiiPr3 , DIPP=2,6-diisopropylphenyl). While monomeric 1-Ca was already known, the new complexes have been structurally characterized. Monomers 1-Ae are highly linear while the monomers 2-Ae are slightly bent. The bulkier amide complexes 1-Ae are by far the most active catalysts in alkene hydrogenation with activities increasing from Mg to Ba. Catalyst 1-Ba can reduce internal alkenes like cyclohexene or 3-hexene and highly challenging substrates like 1-Me-cyclohexene or tetraphenylethylene. It is also active in arene hydrogenation reducing anthracene and naphthalene (even when substituted with an alkyl) as well as biphenyl. Benzene could be reduced to cyclohexane but full conversion was not reached. The first step in catalytic hydrogenation is formation of an (amide)AeH species, which can form larger aggregates. Increasing the bulk of the amide ligand decreases aggregate size but it is unclear what the true catalyst(s) is (are). DFT calculations suggest that amide bulk also has a noticeable influence on the thermodynamics for formation of the (amide)AeH species. Complex 1-Ba is currently the most powerful Ae metal hydrogenation catalyst. Due to tremendously increased activities in comparison to those of previously reported catalysts, the substrate scope in hydrogenation catalysis could be extended to challenging multi-substituted unactivated alkenes and even to arenes among which benzene.
RESUMO
Double deprotonation of the diamine 1,1'-(tBuCH2 NH)-ferrocene (1-H2 ) by alkaline-earth (Ae) or EuII metal reagents gave the complexes 1-Ae (Ae=Mg, Ca, Sr, Ba) and 1-Eu. 1-Mg crystallized as a monomer while the heavier complexes crystallized as dimers. The Feâ â â Mg distance in 1-Mg is too long for a bonding interaction, but short Feâ â â Ae distances in 1-Ca, 1-Sr, and 1-Ba clearly support intramolecular Feâ â â Ae bonding. Further evidence for interactions is provided by a tilting of the Cp rings and the related 1 Hâ NMR chemical-shift difference between the Cp α and ß protons. While electrochemical studies are complicated by complex decomposition, UV/Vis spectral features of the complexes support FeâAe dative bonding. A comprehensive bonding analysis of all 1-Ae complexes shows that the heavier species 1-Ca, 1-Sr, and 1-Ba possess genuine FeâAe bonds which involve vacant d-orbitals of the alkaline-earth atoms and partially filled d-orbitals on Fe. In 1-Mg, a weak FeâMg donation into vacant p-orbitals of the Mg atom is observed.
RESUMO
Porphyrin-hexabenzocoronene architectures serve as good model compounds to study light-harvesting systems. Herein, the synthesis of porphyrin functionalized hexa-peri-hexabenzocoronenes (HBCs), in which one or more porphyrins are covalently linked to a central HBC core, is presented. A series of hexaphenylbenzenes (HPBs) was prepared and reacted under oxidative coupling conditions. The transformation to the respective HBC derivatives worked well with mono- and tri-porphyrin-substituted HPBs. However, if more porphyrins are attached to the HPB core, Scholl oxidations are hampered or completely suppressed. Hence, a change of the synthetic strategy was necessary to first preform the HBC core, followed by the introduction of the porphyrins. All products were fully characterized, including, if possible, single-crystal XRD. UV/Vis absorption spectra of porphyrin-HBCs showed, depending on the number of porphyrins as well as with respect to the substitution pattern, variations in their spectral features with strong distortions of the porphyrins' B-band.
RESUMO
Mixed cyclotrimerization reactions of diarylacetylenes (tolans) were applied to generate a library of multiple porphyrin-hexaphenylbenzene (HPB) architectures. Successful reactions, which could be influenced by the ratio of tolan starting materials, were conducted using dicobaltoctacarbonyl as a catalyst. Separation of the reaction products was performed by chromatographic and crystallization techniques. The physical properties were investigated with respect to the number of porphyrins per HPB and their substitution pattern.
RESUMO
The low-valent ß-diketiminate complex (DIPP BDI)Al is stable in benzene but addition of catalytic quantities of [(DIPP BDI)CaH]2 at 20 °C led to (DIPP BDI)Al(Ph)H (DIPP BDI=CH[C(CH3 )N-DIPP]2 , DIPP=2,6-diisopropylphenyl). Similar Ca-catalyzed C-H bond activation is demonstrated for toluene or p-xylene. For toluene a remarkable selectivity for meta-functionalization has been observed. Reaction of (DIPP BDI)Al(m-tolyl)H with I2 gave m-tolyl iodide, H2 and (DIPP BDI)AlI2 which was recycled to (DIPP BDI)Al. Attempts to catalyze this reaction with Mg or Zn hydride catalysts failed. Instead, the highly stable complexes (DIPP BDI)Al(H)M(DIPP BDI) (M=Mg, Zn) were formed. DFT calculations on the Ca hydride catalyzed arene alumination suggest that a similar but more loosely bound complex is formed: (DIPP BDI)Al(H)Ca(DIPP BDI). This is in equilibrium with the hydride bridged complex (DIPP BDI)Al(µ-H)Ca(DIPP BDI) which shows strongly increased electron density at Al. The combination of Ca-arene bonding and a highly nucleophilic Al center are key to facile C-H bond activation.
RESUMO
The steric bulk of the well-known DIPP BDI ligand (CH[C(CH3 )N-DIPP]2 , DIPP=2,6-diisopropylphenyl) was increased by replacing isopropyl for isopentyl groups. This very bulky DIPeP BDI ligand could not stabilize the radical species (DIPeP BDI)Mg. : reduction of (DIPeP BDI)MgI with Na gave (DIPeP BDI)2 Mg2 with a rather long Mg-Mg bond of 3.0513(8)â Å. Addition of TMEDA prior to reduction gave complex (DIPeP BDI)2 Mg2 (C6 H6 ), which could also be obtained as its THF adduct. It is speculated that combination of a bulky spectator ligand and TMEDA prevents dimerization of the intermediate MgI radical, which then reacts with the benzene solvent. Complex (DIPeP BDI)2 Mg2 (C6 H6 ), which formally contains the anti-aromatic anion C6 H6 2- , reacted with tBuOH as a Brønsted base to 1,3- and 1,4-cyclohexadiene and with H2 as a two electron donor to (DIPeP BDI)2 Mg2 H2 and C6 H6 . It also reductively cleaved the C-F bond in fluorobenzene and gave (DIPeP BDI)MgPh, (DIPeP BDI)MgF, and C6 H6 .
RESUMO
Key to the isolation of the first alkyl strontium complex was the synthesis of a strontium hydride complex that is stable towards ligand exchange reactions. This goal was achieved by using the super bulky ß-diketiminate ligand DIPeP BDI (CH[C(Me)N-DIPeP]2 , DIPeP=2,6-diisopentylphenyl). Reaction of DIPeP BDI-H with Sr[N(SiMe3 )2 ]2 gave (DIPeP BDI)SrN(SiMe3 )2 , which was converted with PhSiH3 into [(DIPeP BDI)SrH]2 . Dissolved in C6 D6 , the strontium hydride complex is stable up to 70 °C. At 60 °C, H-D isotope exchange gave full conversion into [(DIPeP BDI)SrD]2 and C6 D5 H. Since H-D exchange with D2 is facile, the strontium hydride complex served as a catalyst for the deuteration of C6 H6 by D2 . Reaction of [(DIPeP BDI)SrH]2 with ethylene gave [(DIPeP BDI)SrEt]2 . The high reactivity of this alkyl strontium complex is demonstrated by facile ethylene polymerization and nucleophilic aromatic substitution with C6 D6 , giving alkylated aromatic products and [(DIPeP BDI)SrD]2 .
RESUMO
The synthesis of a new iridium(I) complex containing an enamido phosphine anion (dbuP- ) and its unique reactivity with CO2 is reported. The complex binds two equivalents of CO2 and initiates a highly selective reaction cascade. The reaction leads to the reversible cleavage of CO2 and the enamido ligand as well. Computational analysis points to the existence of a relatively stable Ir-CO2 complex as a reaction intermediate prior to CO2 cleavage, which was confirmed experimentally. The observed transformation resembles several aspects of enzymatic CO2 fixation by RuBisCO.