RESUMO
The viability of using ammonia as a hydrogen storage vector is contingent on the development of catalytic systems active for ammonia decomposition at low temperatures. Zeolite-supported metal catalysts, unlike systems based on supports like MgO or carbon nanotubes (CNTs), are crystalline and lend themselves to analytic techniques like synchrotron X-ray powder diffraction (SXRD) and Rietveld refinement, allowing precise characterisation of catalytic active sites, and therefore mechanistic elucidation. This study focuses on characterising and optimising novel zeolite-supported Ru catalysts for ammonia decomposition, with a focus on the effects of N-substitution on catalyst structure and activity. Characterisation focuses on an unsubstituted and N-substituted Ru-zeolite Y pair with NMR, FTIR, TEM, XRD, XAS, ICP, and BET, demonstrating the successful incorporation of N into the zeolite framework and an enhancement in metal dispersion upon N-substitution. A series of 18 monometallic and bimetallic catalysts is then synthesised on X and USY supports and screened for catalytic activity. Ru is identified as the most active metal for ammonia decomposition. Observed trends suggest catalyst dispersion can be increased with substantially lower metal loadings, and in particular via the formation of stably anchored oligonuclear metal clusters within the zeolite framework, as opposed to much larger nanoparticles (NPs) on its exterior, following N-substitution of the framework. DFT modelling proposes a prismatic Ru6N6 cluster fitted to XAS data. High-activity catalyst Ru-ß (N) 2.4% demonstrates comparable or better ammonia conversion by Ru wt% than recently reported catalysts in the literature at 450 °C and 30 000 WHSV.
RESUMO
Transition metal doped chalcogenides are one of the most important classes of catalysts that have been attracting increasing attention for petrochemical and energy related chemical transformations due to their unique physiochemical properties. For practical applications, achieving maximum atom utilization by homogeneous dispersion of metals on the surface of chalcogenides is essential. Herein, we report a detailed study of a deposition method using thiourea coordinated transition metal complexes. This method allows the preparation of a library of a wide range of single atoms including both noble and non-noble transition metals (Fe, Co, Ni, Cu, Pt, Pd, Ru) with a metal loading as high as 10 wt % on various ultrathin 2D chalcogenides (MoS2, MoSe2, WS2 and WSe2). As demonstrated by the state-of-the-art characterization, the doped single transition metal atoms interact strongly with surface anions and anion vacancies in the exfoliated 2D materials, leading to high metal dispersion in the absence of agglomeration. Taking Fe on MoS2 as a benchmark, it has been found that Fe is atomically dispersed until 10 wt %, and beyond this loading, formation of coplanar Fe clusters is evident. Atomic Fe, with a high electron density at its conduction band, exhibits a superior intrinsic activity and stability in CO2 hydrogenation to CO per Fe compared to corresponding surface Fe clusters and other Fe catalysts reported for reverse water-gas-shift reactions.
RESUMO
BACKGROUND AIMS: The term "cerebral palsy" (CP) encompasses many syndromes that emerge from brain damage at early stages of ontogenesis and manifest as the inability to retain a normal body position or perform controlled movements. Existing methods of CP treatment, including various rehabilitation strategies and surgical and pharmacological interventions, are mostly palliative, and there is no specific therapy focused on restoring injured brain function. METHODS: During a post-registration clinical investigation, the safety and efficacy of intravenous infusion of allogeneic human leukocyte antigen (HLA)-unmatched umbilical cord blood (UCB) cells were studied in 80 pediatric patients with cerebral palsy and associated neurological complications. Patients received up to 6 intravenous infusions of AB0/Rh-identical, red blood cell-depleted UCB cells at an average dose of 250 × 10(6) viable cells per infusion. RESULTS: Patients were followed for 3-36 months, and multiple cell infusions did not cause any adverse effects. In contrast, in most patients who received four or more UCB cell infusions, positive dynamics related to significant improvements in neurological status and/or cognitive functions were observed. CONCLUSIONS: The results confirm that multiple intravenous infusions of allogeneic AB0/Rh-identical UCB cells may be a safe and effective procedure and could be included in treatment and rehabilitation programs for juvenile patients with cerebral palsy.
Assuntos
Terapia Baseada em Transplante de Células e Tecidos/métodos , Paralisia Cerebral/terapia , Transplante de Células-Tronco de Sangue do Cordão Umbilical/métodos , Sangue Fetal/transplante , Sistema ABO de Grupos Sanguíneos/imunologia , Criança , Pré-Escolar , Feminino , Antígenos HLA/imunologia , Humanos , Lactente , Infusões Intravenosas , Masculino , Sistema do Grupo Sanguíneo Rh-Hr/imunologia , Transplante HomólogoRESUMO
TiO2-based powder materials have been widely studied as efficient photocatalysts for water splitting due to their low cost, photo-responsivity, earthly abundance, chemical and thermal stability, etc. In particular, the recent breakthrough of nitrogen-doped TiO2, which enhances the presence of structural defects and dopant impurities at elevated temperatures, exhibits an impressive visible-light absorption for photocatalytic activity. Although their electronic and optical properties have been extensively studied, the structure-activity relationship and photocatalytic mechanism remain ambiguous. Herein, we report an in-depth structural study of rutile, anatase and mixed phases (commercial P25) with and without nitrogen-doping by variable-temperature synchrotron X-ray powder diffraction. We report that an unusual anisotropic thermal expansion of the anatase phase can reveal the intimate relationship between sub-surface oxygen vacancies, nitrogen-doping level and photocatalytic activity. For highly doped anatase, a new cubic titanium oxynitride phase is also identified which provides important information on the fundamental shift in absorption wavelength, leading to excellent photocatalysis using visible light.
RESUMO
We study theoretically the transport and kinetic processes underlying the operation of a biosensor (particularly the surface plasmon sensor "Biacore") used to study the surface binding kinetics of biomolecules in solution to immobilized receptors. Unlike previous studies, we concentrate mainly on the modeling of system-specific phenomena rather than on the influence of mass transport limitations on the intrinsic kinetic rate constants determined from binding data. In the first problem, the case of two-site binding where each receptor unit on the surface can accommodate two analyte molecules on two different sites is considered. One analyte molecule always binds first to a specific site. Subsequently, the second analyte molecule can bind to the adjacent unoccupied site. In the second problem, two different analytes compete for one binding site on the same surface receptor. Finally, the third problem considers the case of positive cooperativity among bound molecules in the hydrogel using a simple mean-field approach. The transport in both the flow channel and the hydrogel phases of the biosensor is taken into account in this case (with few exceptions, most previous studies assume a simpler model in which the hydrogel is treated as a planar surface with the receptors). We consider simultaneously diffusion and convection through the flow channel together with diffusion and cooperativity binding on the surface and in the hydrogel. In each case, typical results for the concentration contours of the free and bound molecules in the flow channel and hydrogel regions are presented together with the time-dependent association/dissociation curves and reaction rates. For binding site competition, the analysis predicts overshoot phenomena.
Assuntos
Sítios de Ligação , Técnicas Biossensoriais/métodos , Hidrogéis/química , Ressonância de Plasmônio de Superfície/instrumentação , Simulação por Computador , Convecção , Difusão , Cinética , Modelos Teóricos , Ressonância de Plasmônio de Superfície/métodosRESUMO
Nanocables with a radial metal-semiconductor heterostructure have recently been prepared by electrochemical deposition inside metal nanotubes. First, a bare nanoporous polycarbonate track-etched membrane is coated uniformly with a metal film by electroless deposition. The film forms a working electrode for further deposition of a semiconductor layer that grows radially inside the nanopore when the deposition rate is slow. We propose a new physical model for the nanocable synthesis and study the effects of the deposited species concentration, potential-dependent reaction rate, and nanopore dimensions on the electrochemical deposition. The problem involves both axial diffusion through the nanopore and radial transport to the nanopore surface, with a surface reaction rate that depends on the axial position and the time. This is so because the radial potential drop across the deposited semiconductor layer changes with the layer thickness through the nanopore. Since axially uniform nanocables are needed for most applications, we consider the relative role of reaction and axial diffusion rates on the deposition process. However, in those cases where partial, empty-core deposition should be desirable (e.g., for producing conical nanopores to be used in single nanoparticle detection), we give conditions where asymmetric geometries can be experimentally realized.