Towards ballistic transport CVD graphene by controlled removal of polymer residues.

Polymer-assisted wet transfer of chemical vapor deposited (CVD) graphene has achieved great success towards the true potential for large-scale electronic applications, while the lack of an efficient polymer removal method has been regarded as a crucial factor for realizing high carrier mobility in graphene devices. Hereby, we report an efficient and facile method to clean polymer residues on graphene surface by merely employing solvent mixture of isopropanol (IPA) and water (H2O). Raman spectroscopy shows an intact crystal structure of graphene after treatment, and the x-ray photoelectron spectroscopy indicates a significant decrease in the C-O and C=O bond signals, which is mainly attributed to the removal of polymer residues and further confirmed by subsequent atomic force microscopy analysis. More importantly, our gated measurements demonstrate that the proposed approach has resulted in a 3-fold increase of the carrier mobility in CVD graphene with the electron mobility close to 10 000 cm2V-1S-1, corresponding to an electron mean free path beyond 100 nm. This intrigues the promising application for this novel method in achieving ballistic transport for CVD graphene devices.

Analysis of molecular ligand functionalization process in nano-molecular electronic devices containing densely packed nano-particle functionalization shells.

Molecular electronic devices based on few and single-molecules have the advantage that the electronic signature of the device is directly dependent on the electronic structure of the molecules as well as of the electrode-molecule junction. In this work, we use a two-step approach to synthesise functionalized nanomolecular electronic devices (nanoMoED). In first step we apply an organic solvent-based gold nanoparticle (AuNP) synthesis method to form either a 1-dodecanethiol or a mixed 1-dodecanethiol/ω-tetraphenyl ether substituted 1-dodecanethiol ligand shell. The functionalization of these AuNPs is tuned in a second step by a ligand functionalization process where biphenyldithiol (BPDT) molecules are introduced as bridging ligands into the shell of the AuNPs. From subsequent structural analysis and electrical measurements, we could observe a successful molecular functionalization in nanoMoED devices as well as we could deduce that differences in electrical properties between two different device types are related to the differences in the molecular functionalization process for the two different AuNPs synthesized in first step. The same devices yielded successful NO2gas sensing. This opens the pathway for a simplified synthesis/fabrication of molecular electronic devices with application potential.

Nanomolecular electronic devices based on AuNP molecule nanoelectrodes using molecular place-exchange process.

The implementation of electronics applications based on molecular electronics devices is hampered by the difficulty of placing a single or a few molecules with application-specific electronic properties in between metallic nanocontacts. Here, we present a novel method to fabricate 20 nm sized nanomolecular electronic devices (nanoMoED) using a molecular place-exchange process of nonconductive short alkyl thiolates with various short chain conductive oligomers. After the successful place-exchange with short-chain conjugated oligomers in the nanoMoED devices, a change in device resistance of up to four orders of magnitude for 4,4'-biphenyldithiol (BPDT), and up to three orders of magnitude for oligo phenylene-ethynylene (OPE), were observed. The place-exchange process in nanoMoEDs are verified by measuring changes in device resistance during repetitive place-exchange processes between conductive and nonconductive molecules and surface-enhanced Raman spectroscopy. This opens vast possibilities for the fabrication and application of nanoMoED devices with a large variety of molecules.

Tailoring ultra-fast charge transfer in MoS2.

Charge transfer dynamics are of importance in functional materials used in devices ranging from transistors to photovoltaics. The understanding of charge transfer in particular of how fast electrons tunnel away from an excited state and where they end up, is necessary to tailor materials used in devices. We have investigated charge transfer dynamics in different forms of the layered two-dimensional material molybdenum disulphide (MoS2, in single crystal, nanocrystalline particles and crystallites in a reduced graphene oxide network) using core-hole clock spectroscopy. By recording the electrons in the sulphur KLL Auger electron kinetic energy range we have measured the prevalence of localised and delocalised decays from a state created by core excitation using X-rays. We show that breaking the crystal symmetry of the single crystal into either particles or sheets causes the charge transfer from the excited state to occur faster, even more so when incorporating it in a graphene oxide network. The interface between the MoS2 and the reduced graphene oxide forms a Schottky barrier which changes the ratio between local and delocalised decays creating two distinct regions in the charge transfer dependent on the energy of the excited electron. Thereby we show that ultra-fast charge transfer in MoS2 can be tailored, a result which can be used in the design of emergent devices.

Ultrastrong Translucent Glass Ceramic with Nanocrystalline, Biomimetic Structure.

Transparent/translucent glass ceramics (GCs) have broad applications in biomedicine, armor, energy, and constructions. However, GCs with improved optical properties typically suffer from impaired mechanical properties, compared to traditional sintered full-ceramics. We present a method of obtaining high-strength, translucent GCs by preparing ZrO2-SiO2 nanocrystalline glass ceramics (NCGCs) with a microstructure of monocrystalline ZrO2 nanoparticles (NPs), embedded in an amorphous SiO2 matrix. The ZrO2-SiO2 NCGC with a composition of 65%ZrO/35%SiO2 (molar ratio, 65Zr) achieved an average flexural strength of 1 GPa. This is one of the highest flexural strength values ever reported for GCs. ZrO2 NPs bond strongly with SiO2 matrix due to the formation of a thin (2-3 nm) amorphous Zr/Si interfacial layer between the ZrO2 NPs and SiO2 matrix. The diffusion of Si atoms into the ZrO2 NPs forms a Zr-O-Si superlattice. Electron tomography results show that some of the ZrO2 NPs are connected in one direction, forming in situ ZrO2 nanofibers (with length of ∼500 nm), and that the ZrO2 nanofibers are stacked in an ordered way in all three dimensions. The nanoarchitecture of the ZrO2 nanofibers mimics the architecture of mineralized collagen fibril in cortical bone. Strong interface bonding enables efficient load transfer from the SiO2 matrix to the 3D nanoarchitecture built by ZrO2 nanofibers and NPs, and the 3D nanoarchitecture carries the majority of the external load. These two factors synergistically contribute to the high strength of the 65Zr NCGC. This study deepens our fundamental understanding of the microstructure-mechanical strength relationship, which could guide the design and manufacture of other high-strength, translucent GCs.

Tailoring the Thermal and Mechanical Properties of Graphene Film by Structural Engineering.

Due to substantial phonon scattering induced by various structural defects, the in-plane thermal conductivity (K) of graphene films (GFs) is still inferior to the commercial pyrolytic graphite sheet (PGS). Here, the problem is solved by engineering the structures of GFs in the aspects of grain size, film alignment, and thickness, and interlayer binding energy. The maximum K of GFs reaches to 3200 W m-1 K-1 and outperforms PGS by 60%. The superior K of GFs is strongly related to its large and intact grains, which are over four times larger than the best PGS. The large smooth features about 11 µm and good layer alignment of GFs also benefit on reducing phonon scattering induced by wrinkles/defects. In addition, the presence of substantial turbostratic-stacking graphene is found up to 37% in thin GFs. The lacking of order in turbostratic-stacking graphene leads to very weak interlayer binding energy, which can significantly decrease the phonon interfacial scattering. The GFs also demonstrate excellent flexibility and high tensile strength, which is about three times higher than PGS. Therefore, GFs with optimized structures and properties show great potentials in thermal management of form-factor-driven electronics and other high-power-driven systems.

Template-free synthesis of phosphate-based spheres via modified supersaturated phosphate buffer solutions.

Modified supersaturated phosphate buffer solutions were used to synthesize phosphate-based spheres, including calcium phosphate (CaP), strontium phosphate (SrP) and barium phosphate (BaP). A series of ions concentrations in the modified phosphate buffer solutions were investigated in order to study their effects in precipitates morphologies. During synthesis, it was found that magnesium was the key factor in sphere formation. The morphologies of calcium phosphate, strontium phosphate and barium phosphate precipitates varied as the concentration of magnesium ions varied. When sufficient magnesium was provided, the precipitates appeared spherical, and the diameter was in range of 0.5-2 µm. The morphologies, compositions and structure of spheres were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and N2 adsorption analysis. Moreover, the application of magnesium substituted calcium phosphate spheres in dentin tubules occlusion was investigated.

A Simple Transmission Electron Microscopy Method for Fast Thickness Characterization of Suspended Graphene and Graphite Flakes.

We present a simple, fast method for thickness characterization of suspended graphene/graphite flakes that is based on transmission electron microscopy (TEM). We derive an analytical expression for the intensity of the transmitted electron beam I 0(t), as a function of the specimen thickness t (t<<λ; where λ is the absorption constant for graphite). We show that in thin graphite crystals the transmitted intensity is a linear function of t. Furthermore, high-resolution (HR) TEM simulations are performed to obtain λ for a 001 zone axis orientation, in a two-beam case and in a low symmetry orientation. Subsequently, HR (used to determine t) and bright-field (to measure I 0(0) and I 0(t)) images were acquired to experimentally determine λ. The experimental value measured in low symmetry orientation matches the calculated value (i.e., λ=225±9 nm). The simulations also show that the linear approximation is valid up to a sample thickness of 3-4 nm regardless of the orientation and up to several ten nanometers for a low symmetry orientation. When compared with standard techniques for thickness determination of graphene/graphite, the method we propose has the advantage of being simple and fast, requiring only the acquisition of bright-field images.

Cooperative Gold Nanoparticle Stabilization by Acetylenic Phosphaalkenes.

Acetylenic phosphaalkenes (APAs) are used as a novel type of ligands for the stabilization of gold nanoparticles (AuNP). As demonstrated by a variety of experimental and analytical methods, both structural features of the APA, that is, the P=C as well as the C≡C units are essential for NP stabilization. The presence of intact APAs on the AuNP is demonstrated by surface-enhanced Raman spectroscopy (SERS), and first principle calculations indicate that bonding occurs most likely at defect sites on the Au surface. AuNP-bound APAs are in chemical equilibrium with free APAs in solution, leading to a dynamic behavior that can be explored for facile place-exchange reactions with other types of anchor groups such as thiols or more weakly binding phosphine ligands.

Single scan STEM-EMCD in 3-beam orientation using a quadruple aperture.

The need to acquire multiple angle-resolved electron energy loss spectra (EELS) is one of the several critical challenges associated with electron magnetic circular dichroism (EMCD) experiments. If the experiments are performed by scanning a nanometer to atomic-sized electron probe on a specific region of a sample, the precision of the local magnetic information extracted from such data highly depends on the accuracy of the spatial registration between multiple scans. For an EMCD experiment in a 3-beam orientation, this means that the same specimen area must be scanned four times while keeping all the experimental conditions same. This is a non-trivial task as there is a high chance of morphological and chemical modification as well as non-systematic local orientation variations of the crystal between the different scans due to beam damage, contamination and spatial drift. In this work, we employ a custom-made quadruple aperture to acquire the four EELS spectra needed for the EMCD analysis in a single electron beam scan, thus removing the above-mentioned complexities. We demonstrate a quantitative EMCD result for a beam convergence angle corresponding to sub-nm probe size and compare the EMCD results for different detector geometries.

A site-specific focused-ion-beam lift-out method for cryo Transmission Electron Microscopy.

The focused-ion-beam (FIB) is the method of choice for site-specific sample preparation for Transmission Electron Microscopy (TEM) in material sciences. A lamella can be physically lifted out from a specific region of a bulk specimen with submicrometer precision and thinned to electron transparency for high-resolution imaging in the TEM. The possibility to use this tool in life sciences applications has been limited by the lack of lift-out capabilities at the cryogenic temperatures often needed for biological samples. Conventional cryo-TEM sample preparation is mostly based on ultramicrotomy, a procedure that is not site-specific and known to produce artifacts. Here we demonstrate how a cooled nanomanipulator and a custom-built transfer station can be used to achieve cryo-preparation of TEM samples with the FIB, enabling high-resolution investigation of frozen-hydrated specimens in the TEM.

Electron-Beam-Induced Fluorination Cycle for Long-Term Preservation of Graphene under Ambient Conditions.

The aging in air inevitably results in the accumulation of airborne hydrocarbon contaminations on a graphene surface, which causes considerable difficulties in the subsequent application of graphene. Herein, we report an electron-beam-activated fluorination/defluorination cycle for achieving a long-term preservation of CVD graphene. After experiencing such cycle, the accumulation of airborne hydrocarbon on the graphene surfaces is strongly reduced, and the initial chemical status of graphene can be restored, which is confirmed by employing atomic force microscopy and X-ray photoelectron microscopy. Our reported approach provides an efficient method for the cleaning and long-term preservation of graphene, and it is particularly useful for graphene microscopy characterizations.

The Influence of Residuals Combining Temperature and Reaction Time on Calcium Phosphate Transformation in a Precipitation Process.

Precipitation is one of the most common processes to synthesize hydroxyapatite, which is the human body's mineral forming bone and teeth, and the golden bioceramic material for bone repair. Generally, the washing step is important in the precipitation method to remove the residuals in solution and to stabilize the phase transformation. However, the influence of residuals in combination with the reaction temperature and time, on calcium phosphate formation, is not well studied. This could help us with a better understanding of the typical synthesis process. We used a fixed starting ion concentration and pH in our study and did not adjust it during the reaction. XRD, FTIR, ICP-OES, and SEM have been used to analyze the samples. The results showed that combining residuals with both reaction temperature and time can significantly influence calcium phosphate formation and transformation. Dicalcium phosphate dihydrate formation and transformation are sensitive to temperature. Increasing temperature (60 °C) can inhibit the formation of acidic calcium phosphate or transform it to other phases, and further the particle size. It was also observed that high reaction temperature (60 °C) results in higher precipitation efficiency than room temperature. A low ion concentration combining reaction temperature and time could still significantly influence the calcium phosphate transformation during the drying.

Two-, three-, and four-component magnetic multilayer onion nanoparticles based on iron oxides and manganese oxides.

Magnetic multilayered, onion-like, heterostructured nanoparticles are interesting model systems for studying magnetic exchange coupling phenomena. In this work, we synthesized heterostructured magnetic nanoparticles composed of two, three, or four components using iron oxide seeds for the subsequent deposition of manganese oxide. The MnO layer was allowed either to passivate fully in air to form an outer layer of Mn(3)O(4) or to oxidize partially to form MnO|Mn(3)O(4) double layers. Through control of the degree of passivation of the seeds, particles with up to four different magnetic layers can be obtained (i.e., FeO|Fe(3)O(4)|MnO|Mn(3)O(4)). Magnetic characterization of the samples confirmed the presence of the different magnetic layers.

Formation and NMR spectroscopy of ω-thiol protected α,ω-alkanedithiol-coated gold nanoparticles and their usage in molecular charge transport junctions.

Gold nanoparticles (AuNPs) coated with stabilizing molecular monolayers are utilized in areas ranging from life sciences to nanoelectronics. Here we present a novel and facile one-pot single phase procedure for the preparation of stable AuNPs with good dispersity, which are coated with α,ω-alkanedithiols whose outer ω-thiol is protected by a triphenylmethyl group. Using dielectrophoresis we were able to trap these AuNPs, coated with ω-thiol protecting groups, in a 20 nm gold electrode nanogap. The ω-thiol group was then deprotected under acidic conditions in situ once the AuNPs were correctly positioned in the device. The subsequent deprotection resulted in an increase of conductance by up to 3 orders of magnitude, indicating that the isolated dithiol-coated AuNPs were fused into a covalently bonded network with AuNP-molecule-AuNP as well as electrode-molecule-AuNP linkages. Furthermore, complete characterization of the AuNP surface-bonded alkanedithiols was achieved using a series of one- and two-dimensional NMR spectroscopy techniques. Our spectra of the molecule-coated AuNPs show well-resolved signals, only slightly broader than for free molecules in solution, which is in contrast to many earlier reported NMR spectral data of molecules attached to AuNPs. Complementary diffusion NMR spectroscopic experiments were performed to prove that the observed alkanedithiols are definitely surface-bonded species and do not exist in free and unattached form.

Impact of matrix properties on the survival of freeze-dried bacteria.

BACKGROUND: Disaccharides are, in general, the first choice as formulation compounds when freeze-drying microorganisms. Although polysaccharides and other biopolymers are considered too large to stabilise and interact with cell components in the same beneficial way as disaccharides, polymers have been reported to support cell survival. In the present study we compare the efficiency of sucrose and the polymers Ficoll, hydroxyethylcellulose, hydroxypropylmethylcellulose and polyvinylalcohol to support the survival of three bacterial strains during freeze drying. The initial osmotic conditions were adjusted to be similar for all formulations. Formulation characterisation was used to interpret the impact that different compound properties had on cell survival. RESULTS: Despite differences in molecular size, both sucrose and the sucrose-based polymer Ficoll supported cell survival after freeze drying equally well. All formulations became amorphous upon dehydration. Scanning electron microscopy and X-ray diffraction data showed that the discerned differences in structure of the dry formulations had little impact on the survival rates. The capability of the polymers to support cell survival correlated with the surface activity of the polymers in a similar way for all investigated bacterial strains. CONCLUSION: Polymer-based formulations can support cell survival as effectively as disaccharides if formulation properties of importance for maintaining cell viability are identified and controlled.

Simultaneous mapping of EMCD signals and crystal orientations in a transmission electron microscope.

When magnetic properties are analysed in a transmission electron microscope using the technique of electron magnetic circular dichroism (EMCD), one of the critical parameters is the sample orientation. Since small orientation changes can have a strong impact on the measurement of the EMCD signal and such measurements need two separate measurements of conjugate EELS spectra, it is experimentally non-trivial to measure the EMCD signal as a function of sample orientation. Here, we have developed a methodology to simultaneously map the quantitative EMCD signals and the local orientation of the crystal. We analyse, both experimentally and by simulations, how the measured magnetic signals evolve with a change in the crystal tilt. Based on this analysis, we establish an accurate relationship between the crystal orientations and the EMCD signals. Our results demonstrate that a small variation in crystal tilt can significantly alter the strength of the EMCD signal. From an optimisation of the crystal orientation, we obtain quantitative EMCD measurements.

The impact of number of repeats N on the interlayer exchange in [Formula: see text](001) superlattices.

The strength of the interlayer exchange coupling in [Fe/MgO][Formula: see text](001) superlattices with 2 ≤ N ≤ 10 depends on the number of bilayer repeats (N). The exchange coupling is antiferromagnetic for all the investigated thicknesses while being nine times larger in a sample with N = 4 as compared to N = 2. The sequence of the magnetic switching in two of the samples (N = 4, N = 8) is determined using polarized neutron reflectometry. The outermost layers are shown to respond at the lowest fields, consistent with having the weakest interlayer exchange coupling. The results are consistent with the existence of quantum well states defined by the thickness of the Fe and the MgO layers as well as the number of repeats (N) in [Fe/MgO][Formula: see text](001)superlattices.

Biodegradation of graphdiyne oxide in classically activated (M1) macrophages modulates cytokine production.

Graphdiyne oxide (GDYO) is a carbon-based nanomaterial possessing sp2 and sp-hybridized carbon atoms with many promising applications. However, its biocompatibility and potential biodegradability remain poorly understood. Using human primary monocyte-derived macrophages as a model we show here that GDYO elicited little or no cytotoxicity toward classically activated (M1) and alternatively activated (M2) macrophages. Moreover, GDYO reprogrammed M2 macrophages towards M1 macrophages, as evidenced by the elevation of specific cell surface markers and cytokines and the induction of NOS2 expression. We could also show inducible nitric oxide synthase (iNOS)-dependent biodegradation of GDYO in M1 macrophages, and this was corroborated in an acellular system using the peroxynitrite donor, SIN-1. Furthermore, GDYO elicited the production of pro-inflammatory cytokines in a biodegradation-dependent manner. Our findings shed new light on the reciprocal interactions between GDYO and human macrophages. This is relevant for biomedical applications of GDYO such as the re-education of tumor-associated macrophages or TAMs.

Fabrication of BP2T functionalized graphene via non-covalent π-π stacking interactions for enhanced ammonia detection.

Graphene has stimulated great enthusiasm in a variety of fields, while its chemically inert surface still remains challenging for functionalization towards various applications. Herein, we report an approach to fabricate non-covalently functionalized graphene by employing π-π stacking interactions, which has potentialities for enhanced ammonia detection. 5,5'-Di(4-biphenylyl)-2,2'-bithiophene (BP2T) molecules are used in our work for the non-covalent functionalization through strong π-π interactions of aromatic structures with graphene, and systematic investigations by employing various spectroscopic and microscopic characterization methods confirm the successful non-covalent attachment of the BP2T on the top of graphene. From our gas sensing experiments, the BP2T functionalized graphene is promising for ammonia sensing with a 3-fold higher sensitivity comparing to that of the pristine graphene, which is mainly attributed to the enhanced binding energy between the ammonia and BP2T molecules derived by employing the Langmuir isotherm model. This work provides essential evidence of the π-π stacking interactions between graphene and aromatic molecules, and the reported approach also has the potential to be widely employed in a variety of graphene functionalizations for chemical detection.