RESUMO
Achieving metal-organic frameworks (MOFs) with nonlinear optical (NLO) switching is profoundly important. Herein, the conductive MOFs Cu-TCNQ phase I (Ph-I) and phase II (Ph-II) films were prepared using the liquid-phase-epitaxial layer-by-layer spin-coating method and steam heating method, respectively. Electronic experiments showed that the Ph-II film could be changed into the Ph-I film under an applied electric field. The third-order NLO results revealed that the Ph-I film had a third-order nonlinear reverse saturation absorption (RSA) response and the Ph-II film displayed a third-order nonlinear saturation absorption (SA) response. With increases in the heating time and applied voltage, the third-order NLO response realized the reversible transition between SA and RSA. The theoretical calculations indicated that Ph-I possessed more interlayer charge transfer, resulting in a third-order nonlinear RSA response that was stronger than that of Ph-II. This work applies phase-transformed MOFs to third-order NLO switching and provides new insights into the nonlinear photoelectric applications of MOFs.
RESUMO
Photothermal hydrogenation of carbon dioxide (CO2) into value-added products is an ideal solution for addressing the energy crisis and mitigating CO2 emissions. However, achieving high product selectivity remains challenging due to the simultaneous occurrence of numerous competing intermediate reactions during CO2 hydrogenation. We present a novel approach featuring isolated single-atom nickel (Ni) anchored onto indium oxide (In2O3) nanocrystals, serving as an effective photothermal catalyst for CO2 hydrogenation into methane (CH4) with a remarkable near-unity (â¼99%) selectivity. Experiments and theoretical simulations have confirmed that isolated Ni sites on the In2O3 surface can effectively stabilize the intermediate products of the CO2 hydrogenation reaction and reduce the transition state energy barrier, thereby changing the reaction path to achieve ultrahigh selective methanation. This study provides comprehensive insights into the design of single-atom catalysts for the highly selective photothermal catalytic hydrogenation of CO2 to methane.
RESUMO
Different from the previous neutral reaction solvent system, this work explores the synthesis of Al-oxo rings in ionic environments. Deep eutectic solvents (DESs) formed by quaternary ammonium salts hydrogen bond acceptor (HBA) and phenols hydrogen bond donor (HBD) further reduce the melting point of the reaction system and provide an ionic environment. Further, the quaternary ammonium salt was chosen as the HBA because it contains a halogen anion that matches the size of the central cavity of the molecular ring. Based on this thought, five Al8 ion pair cocrystals were synthesized via "DES thermal". The general formula is Q+ â {Cl@[Al8(BD)8(µ2-OH)4L12]} (AlOC-180-AlOC-185, Q+ = tetrabutylammonium, tetrapropylammonium, 1-butyl-3-methylimidazole; HBD = phenol, p-chlorophenol, p-fluorophenol; HL = benzoic acid, 1-naphthoic acid, 1-pyrenecarboxylic acid, anthracene-9-carboxylic acid). Structural studies reveal that the phenol-coordinated Al molecular ring and the quaternary ammonium ion pair form the cocrystal compounds. The halogen anions in the DES component are confined in the center of the molecular ring, and the quaternary ammonium cations are located in the organic shell. Such an adaptive cocrystal binding pattern is particularly evident in the structures coordinated with low-symmetry ligands such as naphthoic acid and pyrene acid. Finally, the optical behavior of these cocrystal compounds is understood from the analysis of crystal structure and theoretical calculation.
RESUMO
Structural asymmetry affecting the nonlinear optics (NLO) of metal-organic frameworks (MOFs) is very important in fundamentals and applications but is still a challenge. Herein we develop a series of indium-porphyrinic framework (InTCPP) thin films and provide the first study on the coordination-induced symmetry breaking on their third-order NLO. The continuous and oriented InTCPP(H2) thin films were grown on quartz substrates and then postcoordinated with different cations (Fe2+ or Fe3+Cl-) in InTCPP(H2) (named InTCPP(Fe2+) and InTCPP(Fe3+Cl-)). The third-order NLO results reveal the Fe2+ and Fe3+Cl- coordinated InTCPP thin films have substantially enhanced NLO performance. Moreover, InTCPP(Fe3+Cl-) thin films cause symmetry breaking of microstructures, resulting in a 3-fold increase in the nonlinear absorption coefficient (up to 6.35 × 10-6 m/W) compared to InTCPP(Fe2+). This work not only develops a series of nonlinear optical MOF thin films but also provides new insight into symmetry breaking on MOFs for nonlinear optoelectronic applications.
RESUMO
Developing artificial enzymes with excellent catalytic activities and uncovering the structural and chemical determinants remain a grand challenge. Discrete titanium-oxo clusters with well-defined coordination environments at the atomic level can mimic the pivotal catalytic center of natural enzymes and optimize the charge-transfer kinetics. Herein, we report the precise structural tailoring of a self-assembled tetrahedral Ti4Mn3-cluster for photocatalytic CO2 reduction and realize the selective evolution of CO over specific sites. Experiments and theoretical simulation demonstrate that the high catalytic performance of the Ti4Mn3-cluster should be related to the synergy between active Mn sites and the surrounding functional microenvironment. The reduced energy barrier of the CO2 photoreduction reaction and moderate adsorption strength of CO* are beneficial for the high selective evolution of CO. This work provides a molecular scale accurate structural model to give insight into artificial enzyme for CO2 photoreduction.
RESUMO
Making oppositely charged metal-organic cages (MOCs) into a tightly ordered structure may bring interesting functions. Herein, we report a novel structure composed of anionic (Zr4 L6 )8- (L=embonate) tetrahedral cages and in situ-formed cationic [Zn4 (Bim)4 ]4+ (Bim=[BH(im)3 ]- ; im=imidazole) cubic cages. Chiral transfer is observed from enantiopure (Zr4 L6 )8- cage to enantiopure [Zn4 (Bim)4 ]4+ cage. A pair of enantiomers (PTC-373(Δ) and PTC-373(Λ)) are formed. PTC-373 exhibits high chemical and thermal stabilities, affording an interesting single-crystal-to-single-crystal transformation. More importantly, the combination of ionic pair cages significantly enhances its third-order nonlinear optical property, and its thin-film exhibits an excellent optical limiting effect.
RESUMO
Two-dimensional (2D) materials demonstrate promising potential as high-efficiency photocatalysts. However, the intrinsic limitations of aluminum nitride (AlN), such as inadequate oxidation capacity, a high carrier recombination rate, and limited absorption of visible light, pose considerable challenges. In this paper, we introduce a novel co-doping technique with dysprosium (Dy) and carbon (C) on a 2D AlN monolayer, aiming to enhance its photocatalytic properties. Our first-principles calculations reveal a reduction in the bandgap and a significant enhancement in the visible light absorption rate of the co-doped Al24N22DyC2 structure. Notably, the distribution of the highest occupied molecular orbital and the lowest unoccupied molecular in proximity to Dy atoms demonstrates favorable conditions for carrier separation. Theoretical assessments of the hydrogen evolution reaction and oxygen evolution reaction activities further corroborate the potential of Al24N22DyC2 as a competent catalyst for photocatalytic reactions. These findings provide valuable theoretical insights for the experimental design and fabrication of novel, high-efficiency AlN semiconductor photocatalysts.
RESUMO
In order to determine the polarizability and hyperpolarizability of a molecule, several key parameters need to be known, including the excitation energy of the ground and excited states, the transition dipole moment, and the difference of dipole moment between the ground and excited states. In this study, a machine-learning model was developed and trained to predict the molecular polarizability and second-order hyperpolarizability on a subset of QM9 data set. The density of states was employed as input to the model. The results demonstrated that the machine-learning model effectively estimated both polarizability and the order of magnitude of second-order hyperpolarizability. However, the model was unable to predict the dipole moment and first-order hyperpolarizability, suggesting limitations in its ability to predict the difference of dipole moment between the ground and excited states. The computational efficiency of machine-learning models compared to traditional quantum mechanical calculations enables the possibility of large-scale screening of molecules that satisfy specific requirements using existing databases. This work presents a potential solution for the efficient exploration and analysis of molecules on a larger scale.
RESUMO
Herein, the combination of anionic Zr4L6 (L = embonate) cages and N, N-chelated transition-metal cations leads to a series of new cage-based architectures, including ion pair structures (PTC-355 and PTC-356), dimer (PTC-357), and 3D frameworks (PTC-358 and PTC-359). Structural analyses show that PTC-358 exhibits a 2-fold interpenetrating framework with a 3,4-connected topology, and PTC-359 shows a 2-fold interpenetrating framework with a 4-connected dia network. Both PTC-358 and PTC-359 can be stable in air and other common solvents at room temperature. The investigations of third-order nonlinear optical (NLO) properties indicate that these materials show different degrees of optical limiting effects. It is surprising that increasing coordination interactions between anion and cation moieties can effectively enhance their third-order NLO properties, which can be attributed to the formation of coordination bonds that facilitate charge transfer. In addition, the phase purity, UV-vis spectra, and photocurrent properties of these materials were also studied. This work provides new ideas for the construction of third-order NLO materials.
RESUMO
Porous organic polymers (POPs) with high porosity and tunable functionalities have been widely studied for use in gas separation, catalysis, energy conversion and energy storage. However, the high cost of organic monomers, and the use of toxic solvents and high temperatures during synthesis pose obstacles for large-scale production. Herein, we report the synthesis of imine and aminal-linked POPs using inexpensive diamine and dialdehyde monomers in green solvents. Theoretical calculations and control experiments show that using meta-diamines is crucial for forming aminal linkages and branching porous networks from [2+2] polycondensation reactions. The method demonstrates good generality in that 6 POPs were successfully synthesized from different monomers. Additionally, we scaled up the synthesis in ethanol at room temperature, resulting in the production of POPs in sub-kilogram quantities at a relatively low cost. Proof-of-concept studies demonstrate that the POPs can be used as high-performance sorbents for CO2 separation and as porous substrates for efficient heterogeneous catalysis. This method provides an environmentally friendly and cost-effective approach for large-scale synthesis of various POPs.
RESUMO
Pore size plays a critical role in determining the performance of metal-organic frameworks (MOFs) in catalysis, sensing, and gas storage or separation. However, revealing the pore-size/property relationship remains extremely challenging because ideal structure models possessing different pore sizes but having the same components are lacking. In this work, a solvent-coordination directed structure swelling method was developed for modulating the ratio between the large and narrow pore phases of a flexible MOF, MIL-88B. Pore-size-dependent gas sensitivity and selectivity were studied for the first time in the MIL-88B samples. The optimized MIL-88B-20 % sample showed one of the best sensing performances among all the reported MOF-based H2 S-sensing materials. This work not only provides a method to synthesize ideal structure models for revealing the relationship between pore-size and properties, but also may inspire the development of high-performance gas sensing materials.
Assuntos
Estruturas Metalorgânicas , Estruturas Metalorgânicas/química , Solventes , CatáliseRESUMO
Designing porous materials for C2 H2 purification and safe storage is essential research for industrial utilization. We emphatically regulate the metal-alkyne interaction of PdII and PtII on C2 H2 sorption and C2 H2 /CO2 separation in two isostructural NbO metal-organic frameworks (MOFs), Pd/Cu-PDA and Pt/Cu-PDA. The experimental investigations and systematic theoretical calculations reveal that PdII in Pd/Cu-PDA undergoes spontaneous chemical reaction with C2 H2 , leading to irreversible structural collapse and loss of C2 H2 /CO2 sorption and separation. Contrarily, PtII in Pt/Cu-PDA shows strong di-σ bond interaction with C2 H2 to form specific π-complexation, contributing to high C2 H2 capture (28.7â cm3 g-1 at 0.01â bar and 153â cm3 g-1 at 1â bar). The reusable Pt/Cu-PDA efficiently separates C2 H2 from C2 H2 /CO2 mixtures with satisfying selectivity and C2 H2 capacity (37â min g-1 ). This research provides valuable insight into designing high-performance MOFs for gas sorption and separation.
RESUMO
The electronic conductivity (EC) of metal-organic frameworks (MOFs) is sensitive to strongly oxidizing guest molecules. Water is a relatively mild species, however, the effect of H2 O on the EC of MOFs is rarely reported. We explored the effect of H2 O on the EC in the MOFs (NH2 )2 -MIL-125 and its derivatives with experimental and theoretical investigations. Unexpectedly, a large EC increase of 107 on H2 SO4 @(NH2 )2 -MIL-125 by H2 O was observed. Brønsted acid-base pairs formed with the -NH2 groups, and H2 SO4 played an important role in promoting the charge transfer from H2 O to the MOF. Based on H2 SO4 @(NH2 )2 -MIL-125, a high-performance chemiresistive humidity sensor was developed with the highest sensitivity, broadest detection range, and lowest limit of detection amongst all reported sensing materials to date. This work not only demonstrated that H2 O can remarkably influence the EC of MOFs, but it also revealed that post-modification of the structure of MOFs could enhance the influence of the guest molecule on their EC to design high-performance sensing materials.
RESUMO
A series of catecholate-functionalized titanium-oxo clusters (TOCs), PTC-271 to PTC-277, with atomically precise structures were synthesized and characterized, including distinctive "boat" and "chair" conformations in PTC-273 and PTC-274, respectively. These cluster compounds are prominent for their ultralow optical band gaps, as is visually evident from the rather unusual black TOCs (B-TOCs), PTC-272 to PTC-277. The cluster structures were found to be ultrastable with respect to air, water, organic solvents, and even acidic or basic aqueous solutions in a wide pH range (pH 0-13), owing to the stabilizing effects of catecholate and its derivatives, as well as the carboxylate ligands. Another prominent feature is the occurrence of third-order nonlinear optical (NLO) performance, which has previously been unreported in the field of homometallic titanium-oxo clusters. Open-aperture Z-scan experiments show significant solid-state optical limiting (OL) applications of these B-TOCs, with high laser irradiation stability and low minimum normalized transmittance (Tmin) of PTC-273 as â¼0.17. Meanwhile, theoretical calculations indicate that the smaller band gaps of B-TOCs were beneficial for strengthening the NLO response. This work not only represents a significant milestone in the construction of stable low-band gap black titanium oxide materials but also contributes to the mechanism insights into their optical applications.
RESUMO
Mixed X-anion perovskites, such as CsPbX3 (X = Cl, Br, or I), play an important role in photovoltaic applications. The massive disordered structures associated with mixed anions produce the need for property calculations. However, traditional density functional theory (DFT) computational tools are limited by their computational efficiency to generate the properties of a large number of structures quickly. Researchers have proposed supervised deep learning to forecast crystal properties. For such a supervised convolutional neural network (CNN), we introduce an adversarial loss function that allows for consistent or lower errors with a fewer samples. Meanwhile, we have trained parameterized quantum circuits (PQCs) of CNNs and auto-encoder networks for extracting structural representations. PQCs of deep learning, also named quantum deep learning or quantum machine learning, have been first applied in the research of perovskites and obtained an RMSE (root mean squared error) of less than 1 meV. Our work demonstrates that adversarial learning training mechanisms and PQC-based quantum deep learning will emerge for extensive and deep exploration of data-driven material formation prediction tasks.
RESUMO
The development of metal-organic frameworks (MOFs) with nonlinear optical (NLO) properties is of pronounced significance for optical devices. Herein, a series of 2D MOFs ZnTPyP(M) (TPyP = 5,10,15,20-tetrakis(4-pyridyl)porphyrin, M = Cu, Ni, Mn, H2) films with [010]-orientation growth composed of ultrathin nanosheets from a pyridylporphyrinic ligand are first obtained by using a liquid-phase epitaxial (LPE) layer-by-layer (lbl) growth approach. ZnTPyP(M) films show a giant nonlinear optical limiting (OL) response and can be modulated by tuning the type of metalloporphyrinic ligands. As a result, ZnTPyP(Cu) film exhibits the highest nonlinear absorption coefficient of 5.7 × 10-6 m/W compared to other reported NLO materials. Density functional theory calculations were consistent with the experimental results, revealing that the tunable π-π* local excitation and the increased delocalization of the metalloporphyrinic group regulate the NLO performance of ZnTPyP(M) films. These findings provide new insight into the effect of 2D porphyrinic MOFs toward the NLO response and offer new film candidates for nonlinear OL application.
Assuntos
Estruturas Metalorgânicas , Metaloporfirinas , Porfirinas , Ligantes , Compostos de ZincoRESUMO
Perturbing the periodic electronic structure of the MoS2 basal plane via vacancy engineering offers an opportunity to explore its intrinsic activity. A significant challenge is the design of vacancy states, which include its type, distribution, and accessibility. Here, well-dispersed and vertically aligned MoS2 nanosheets with an in-plane selectively cleaved Mo-S bond on a carbon matrix (c-MoS2-C) have been prepared by a self-engaged strategy, which synergistically realizes uniform vacancy manufacturing and three-dimensional (3D) self-assembly of the defective MoS2 nanosheets. X-ray adsorption spectroscopy investigation confirms that the cleaved MoS2 basal plane generates newly active edge sites, where the Mo centers feature unsaturated coordination geometry. Theoretical calculations reveal that the exposed interior edge Mo sites represent new active centers for hydrogen adsorption/desorption. As expected, the synthesized c-MoS2-C exhibits markedly enhanced hydrogen evolution activity and superior stability. This in-plane activation strategy could be extended to other types of transition-metal dichalcogenides and catalytic reaction systems.
RESUMO
As one of the most representative polyoxometalate (POM) structures, Keggin clusters have attracted considerable attention. Nevertheless, the noble-metal-templated Keggin structure has not been reported to date. In this work, for the first time, a Ag atom was successfully incorporated to template the formation of a γ-Keggin alkytin-oxo cluster. Moreover, the central Ag atom has brought a significant heavy atom effect, showing the important influence on the electronic structure and optical properties. Theoretical calculations demonstrate that the Ag atom affects the frontier molecular orbitals and excited states of the AgSn12 cluster, and also the process of electron transfer. The solid structure of the AgSn12 cluster exhibits a significant third-order nonlinear optical (NLO) response, and an excellent optical limiting effect has been experimentally verified. The success of this work opens the way for the construction and optical properties modulation of noble metal templated Keggin structures.
RESUMO
Structural interpenetration in metal-organic frameworks (MOFs) significantly impacts on their properties and functionalities. However, understanding the interpenetration on third-order nonlinear optics (NLO) of MOFs have not been reported to date. Herein, we report two 3D porphyrinic MOFs, a 2-fold interpenetrated [Zn2(TPyP)(AC)2] (ZnTPyP-1) and a noninterpenetrated [Zn3(TPyP)(H2O)2(C2O4)2] (ZnTPyP-2), constructed from 5,10,15,20-tetra(4-pyridyl)porphyrin (TPyP(H2)) and Zn(NO3)2 (AC = acetate, C2O4 = oxalate). ZnTPyP-1 achieves excellent optical limiting (OL) performance with a giant nonlinear absorption coefficient (3.61 × 106 cm/GW) and large third-order susceptibility (7.73 × 10-7 esu), which is much better than ZnTPyP-2 and other reported OL materials. The corresponding MOFs nanosheets are dispersed into a polydimethylsiloxane (PDMS) matrix to form highly transparent and flexible MOFs/PDMS glasses for practical OL application. In addition, the OL response optimized by adjusting the MOFs concentration in the PDMS matrix and the type of metalloporphyrin are discussed in the ZnTPyP-1 system. The theoretical calculation confirmed that the abundant π-π interaction from porphyrinic groups in the interpenetrated framework increased the electron delocalization/transfer and boosted the OL performance. This study opens a new avenue to enhance OL performance by the construction of interpenetrated structures and provides a new approach for the preparation of transparent and flexible MOF composites in nonlinear optical applications.
RESUMO
Tin oxide based materials have attracted much attention as new sources for nonlinear optical (NLO) devices, while the electronic mechanism behind the structure and nonlinearity is still unclear. In this work, by precisely controlling different functionalization ligands, here a series of binuclear [(nBuSn)2(TEOA)2L2] (L = monocarboxylic acid ligand) complexes have been synthesized and characterized; we also adopted a new method to make the metal clusters and PMMA blend together for NLO testing. Importantly, the electronic structure, static third-order NLO properties, sum over states (SOS) have been studied by both experimental and density function theory (DFT) analysis. The effects for general NLO polarizability under various conditions, including different substitutions ligands and replacement of the metal cores, have been further investigated. The results indicate the static second hyperpolarizabilities (γ) is inversely proportional to the band gap decreases. Notably, the theory predicts that the third-order nonlinear coefficient will double through the synergistic effects of pull-push groups. The hole-electron analysis of the main excited states indicates the simultaneous introduction of pull-push electron groups into the system cause the excitation of the valence layer from LE to LLCT, which also leads to significant increase in the γ value of complex 13. This work demonstrates that an efficient adjustment for the intensity of NLO polarizability can be achieved by regulating the substitutions and the material structures, providing a new potential for the application of tin-oxo clusters in the field of nonlinear optics.