RESUMO
Precisely timed activation of genetically targeted cells is a powerful tool for the study of neural circuits and control of cell-based therapies. Magnetic control of cell activity, or 'magnetogenetics', using magnetic nanoparticle heating of temperature-sensitive ion channels enables remote, non-invasive activation of neurons for deep-tissue applications and freely behaving animal studies. However, the in vivo response time of thermal magnetogenetics is currently tens of seconds, which prevents precise temporal modulation of neural activity. Moreover, magnetogenetics has yet to achieve in vivo multiplexed stimulation of different groups of neurons. Here we produce subsecond behavioural responses in Drosophila melanogaster by combining magnetic nanoparticles with a rate-sensitive thermoreceptor (TRPA1-A). Furthermore, by tuning magnetic nanoparticles to respond to different magnetic field strengths and frequencies, we achieve subsecond, multichannel stimulation. These results bring magnetogenetics closer to the temporal resolution and multiplexed stimulation possible with optogenetics while maintaining the minimal invasiveness and deep-tissue stimulation possible only by magnetic control.
Assuntos
Drosophila melanogaster , Neurônios , Animais , Canais Iônicos , Fenômenos Magnéticos , Neurônios/fisiologiaRESUMO
The present study examined the effect of Lactobacillus plantarum ATCC14917 fermentation on the chemical composition and antioxidant activity of apple juice. Apple juice was fermented and examined of its antioxidant activity using chemical models and cellular antioxidant assay. Furthermore, the chemical composition of fermented apple juice was characterized by LC-MS/MS. Lactobacillus plantarum ATCC14917 fermentation showed an increase in DPPH and ABTS radical scavenging activity as well as cellular antioxidant activity of apple juice. However, fermentation decreased the total phenolic and flavonoid content. Subsequent LC-MS/MS analysis of the phenolic profile indicated that the content of 5-O-caffeoylquinic acid (5-CQA), quercetin, and phloretin with strong antioxidant activity was increased significantly after fermentation. The modified phenolic composition may contribute to the increased antioxidant activity of fermented apple juice. Our findings showed that Lactobacillus plantarum ATCC14917 fermentation may be an efficient way to enhance the bioavailability of phenolic compounds and to protect cells from oxidative stress.
Assuntos
Antioxidantes/farmacologia , Fermentação , Sucos de Frutas e Vegetais , Lactobacillus plantarum/metabolismo , Malus/química , Animais , Benzotiazóis/farmacologia , Compostos de Bifenilo/farmacologia , Sobrevivência Celular/efeitos dos fármacos , Flavonoides/análise , Sequestradores de Radicais Livres/farmacologia , Frutose/análise , Glucose/análise , Concentração de Íons de Hidrogênio , Camundongos , Fenóis/análise , Picratos/farmacologia , Células RAW 264.7 , Ácidos Sulfônicos/farmacologiaRESUMO
A swarm-exploring neurodynamic network (SENN) based on a two-timescale model is proposed in this study for solving nonconvex nonlinear programming problems. First, by using a convergent-differential neural network (CDNN) as a local quadratic programming (QP) solver and combining it with a two-timescale model design method, a two-timescale convergent-differential (TTCD) model is exploited, and its stability is analyzed and described in detail. Second, swarm exploration neurodynamics are incorporated into the TTCD model to obtain an SENN with global search capabilities. Finally, the feasibility of the proposed SENN is demonstrated via simulation, and the superiority of the SENN is exhibited through a comparison with existing collaborative neurodynamics methods. The advantage of the SENN is that it only needs a single recurrent neural network (RNN) interact, while the compared collaborative neurodynamic approach (CNA) involves multiple RNN runs.
RESUMO
The fruit of Lycium barbarum (Lb), known as red goji berry, is a "superfruit" due to its abundance of bioactive compounds. Among these compounds, dicaffeoylspermidine derivatives (DCSPDs) have anti-oxidant and anti-Alzheimer's Disease activity. This study employed ultra-high-performance liquid chromatography with tandem mass spectrometry to investigate metabolic changes during the development and ripening stages of red goji berries. Totally 97 compounds, including 51 DCSPDs, were tentatively identified. Correlation analysis of these DCSPDs revealed that glycosyltransferases (GTs) play an important role in the formation of glycosylated DCSPDs. In vitro experiments characterized 3 novel GTs could add a glucosyl moiety to N1-caffeoyl-N10-dihydrocaffeoyl spermidine. Homologous GTs from L. ruthenicum (Lr) exhibited similar activity, despite the absence of abundant glycosylated DCSPDs in Lr. These findings provide insights into the metabolic changes and interconnections among active compounds in red goji berries. The identified GTs hold potential for metabolic engineering of DCSPDs and functional food development.
Assuntos
Lycium , Lycium/química , Frutas/química , Glucosiltransferases/metabolismo , Espectrometria de Massas em Tandem , Antioxidantes/químicaRESUMO
Objective.Transcranial magnetic stimulation (TMS) with monophasic pulses achieves greater changes in neuronal excitability but requires higher energy and generates more coil heating than TMS with biphasic pulses, and this limits the use of monophasic pulses in rapid-rate protocols. We sought to design a stimulation waveform that retains the characteristics of monophasic TMS but significantly reduces coil heating, thereby enabling higher pulse rates and increased neuromodulation effectiveness.Approach.A two-step optimization method was developed that uses the temporal relationship between the electric field (E-field) and coil current waveforms. The model-free optimization step reduced the ohmic losses of the coil current and constrained the error of the E-field waveform compared to a template monophasic pulse, with pulse duration as a second constraint. The second, amplitude adjustment step scaled the candidate waveforms based on simulated neural activation to account for differences in stimulation thresholds. The optimized waveforms were implemented to validate the changes in coil heating.Main results.Depending on the pulse duration and E-field matching constraints, the optimized waveforms produced 12%-75% less heating than the original monophasic pulse. The reduction in coil heating was robust across a range of neural models. The changes in the measured ohmic losses of the optimized pulses compared to the original pulse agreed with numeric predictions.Significance.The first step of the optimization approach was independent of any potentially inaccurate or incorrect model and exhibited robust performance by avoiding the highly nonlinear behavior of neural responses, whereas neural simulations were only run once for amplitude scaling in the second step. This significantly reduced computational cost compared to iterative methods using large populations of candidate solutions and more importantly reduced the sensitivity to the choice of neural model. The reduced coil heating and power losses of the optimized pulses can enable rapid-rate monophasic TMS protocols.
Assuntos
Córtex Motor , Estimulação Magnética Transcraniana , Estimulação Magnética Transcraniana/métodos , Córtex Motor/fisiologia , Neurônios , Estimulação ElétricaRESUMO
Many scientific research and engineering problems can be converted to time-varying quadratic programming (TVQP) problems with constraints. Thus, TVQP problem solving plays an important role in practical applications. Many existing neural networks, such as the gradient neural network (GNN) or zeroing neural network (ZNN), were designed to solve TVQP problems, but the convergent rate is limited. The recent varying-parameter convergent-differential neural network (VP-CDNN) can accelerate the convergent rate, but it can only solve the equality-constrained problem. To remedy this deficiency, a novel barrier varying-parameter dynamic learning network (BVDLN) is proposed and designed, which can solve the equality-, inequality-, and bound-constrained problem. Specifically, the constrained TVQP problem is first converted into a matrix equation. Second, based on the modified Karush-Kuhn-Tucker (KKT) conditions and varying-parameter neural dynamic design method, the BVDLN model is conducted. The superiorities of the proposed BVDLN model can solve multiple-constrained TVQP problems, and the convergent rate can achieve superexponentially convergence. Comparative simulative experiments verify that the proposed BVDLN is more effective and more accurate. Finally, the proposed BVDLN is applied to solve a robot motion planning problems, which verifies the applicability of the proposed model.
Assuntos
Algoritmos , Redes Neurais de Computação , Simulação por Computador , Resolução de ProblemasRESUMO
Objective. Motor-evoked potentials (MEPs) are among the most prominent responses to brain stimulation, such as supra-threshold transcranial magnetic stimulation and electrical stimulation. Understanding of the neurophysiology and the determination of the lowest stimulation strength that evokes responses requires the detection of even smaller responses, e.g. from single motor units. However, available detection and quantization methods suffer from a large noise floor. This paper develops a detection method that extracts MEPs hidden below the noise floor. With this method, we aim to estimate excitatory activations of the corticospinal pathways well below the conventional detection level.Approach. The presented MEP detection method presents a self-learning matched-filter approach for improved robustness against noise. The filter is adaptively generated per subject through iterative learning. For responses that are reliably detected by conventional detection, the new approach is fully compatible with established peak-to-peak readings and provides the same results but extends the dynamic range below the conventional noise floor.Main results. In contrast to the conventional peak-to-peak measure, the proposed method increases the signal-to-noise ratio by more than a factor of 5. The first detectable responses appear to be substantially lower than the conventional threshold definition of 50µV median peak-to-peak amplitude.Significance. The proposed method shows that stimuli well below the conventional 50µV threshold definition can consistently and repeatably evoke muscular responses and thus activate excitable neuron populations in the brain. As a consequence, the input-output (IO) curve is extended at the lower end, and the noise cut-off is shifted. Importantly, the IO curve extends so far that the 50µV point turns out to be closer to the center of the logarithmic sigmoid curve rather than close to the first detectable responses. The underlying method is applicable to a wide range of evoked potentials and other biosignals, such as in electroencephalography.
Assuntos
Potencial Evocado Motor , Estimulação Magnética Transcraniana , Potencial Evocado Motor/fisiologia , Estimulação Magnética Transcraniana/métodos , Estimulação Elétrica , Eletroencefalografia , Potenciais EvocadosRESUMO
Neuromuscular magnetic stimulation is a promising tool in neurorehabilitation due to its deeper penetration, notably lower distress, and respectable force levels compared to surface electrical stimulation. However, this method faces great challenges from a technological perspective. The systematic design of better equipment and the incorporation into modern training setups requires better understanding of the mechanisms and predictive quantitative models of the recruited forces. This article proposes a model for simulating the force recruitment in isometric muscle stimulation of the thigh extensors based on previous theoretical and experimental findings. The model couples a 3D field model for the physics with a parametric recruitment model. This parametric recruitment model is identified with a mixed-effects design to learn the most likely model based on available experimental data with a wide range of field conditions. This approach intentionally keeps the model as mathematically simple and statistically parsimonious as possible in order to avoid over-fitting. The work demonstrates that the force recruitment particularly depends on the effective, i.e., fiber-related cross section of the muscles, and that the local median electric field threshold amounts to about 65 V/m, which agrees well with values for magnetic stimulation in the brain. The coupled model is able to accurately predict key phenomena observed so far, such as a threshold shift for different distances between coil and body, the different recruiting performance of various coils with available measurement data in the literature, and the saturation behavior with its onset amplitude. The presented recruitment model could also be readily incorporated into dynamic models for biomechanics as soon as sufficient experimental data are available for calibration.
Assuntos
Músculos , Coxa da Perna , Fenômenos Biomecânicos , Estimulação Elétrica , Humanos , Fenômenos Magnéticos , Músculos/fisiologiaRESUMO
Objective.This article presents a novel transcranial magnetic stimulation (TMS) pulse generator with a wide range of pulse shape, amplitude, and width.Approach.Based on a modular multilevel TMS (MM-TMS) topology we had proposed previously, we realized the first such device operating at full TMS energy levels. It consists of ten cascaded H-bridge modules, each implemented with insulated-gate bipolar transistors, enabling both novel high-amplitude ultrabrief pulses as well as pulses with conventional amplitude and duration. The MM-TMS device can output pulses including up to 21 voltage levels with a step size of up to 1100 V, allowing relatively flexible generation of various pulse waveforms and sequences. The circuit further allows charging the energy storage capacitor on each of the ten cascaded modules with a conventional TMS power supply.Main results. The MM-TMS device can output peak coil voltages and currents of 11 kV and 10 kA, respectively, enabling suprathreshold ultrabrief pulses (>8.25µs active electric field phase). Further, the MM-TMS device can generate a wide range of near-rectangular monophasic and biphasic pulses, as well as more complex staircase-approximated sinusoidal, polyphasic, and amplitude-modulated pulses. At matched estimated stimulation strength, briefer pulses emit less sound, which could enable quieter TMS. Finally, the MM-TMS device can instantaneously increase or decrease the amplitude from one pulse to the next in discrete steps by adding or removing modules in series, which enables rapid pulse sequences and paired-pulse protocols with variable pulse shapes and amplitudes.Significance.The MM-TMS device allows unprecedented control of the pulse characteristics which could enable novel protocols and quieter pulses.
Assuntos
Som , Estimulação Magnética Transcraniana , Coleta de Dados , Fontes de Energia Elétrica , Potencial Evocado Motor/fisiologia , Frequência Cardíaca , Estimulação Magnética Transcraniana/métodosRESUMO
OBJECTIVE: Investigate the variability previously found with cortical stimulation and handheld transcranial magnetic stimulation (TMS) coils, criticized for its high potential of coil position fluctuations, bypassing the cortex using deep brain electrical stimulation (DBS) of the corticospinal tract with fixed electrodes where both latent variations of the coil position of TMS are eliminated and cortical excitation fluctuations should be absent. METHODS: Ten input-output curves were recorded from five anesthetized cats with implanted DBS electrodes targeting the corticospinal tract. Goodness of fit of regressions with a conventional single variability source as well as a dual variability source model was quantified using a Schwarz Bayesian Information approach to avoid overfitting. RESULTS: Motor evoked potentials (MEPs) through DBS of the corticospinal tract revealed short-term fluctuations in excitability of the targeted neuron pathway reflecting endogenous input-side variability at similar magnitude as TMS despite bypassing cortical networks. CONCLUSION: Input-side variability, i.e., variability resulting in changing MEP amplitudes as if the stimulation strength was modulated, also emerges in electrical stimulation at a similar degree and is not primarily a result of varying stimulation, such as minor coil movements in TMS. More importantly, this variability component is present, although the cortex is bypassed. Thus, it may be of spinal origin, which can include cortical input from spinal projections. Further, the nonlinearity of the compound variability entails complex heteroscedastic non-Gaussian distributions and typically does not allow simple linear averages in statistical analysis of MEPs. As the average is dominated by outliers, it risks bias. With appropriate regression, the net effects of excitatory and inhibitory inputs to the targeted neuron pathways become noninvasively observable and quantifiable. SIGNIFICANCE: The neural responses evoked by artificial stimulation in the cerebral cortex are variable. For example, MEPs in response to repeated presentations of the same stimulus can vary from no response to saturation across trials. Several sources of such variability have been suggested, and most of them may be technical in nature, but localization is missing.
Assuntos
Córtex Motor , Tratos Piramidais , Teorema de Bayes , Eletrodos Implantados , Potencial Evocado Motor/fisiologia , Humanos , Córtex Motor/fisiologia , Tratos Piramidais/fisiologia , Estimulação Magnética Transcraniana/métodosRESUMO
Objective.We present a combination of a power electronics system and magnetic nanoparticles that enable frequency-multiplexed magnetothermal-neurostimulation with rapid channel switching between three independent channels spanning a wide frequency range.Approach.The electronics system generates alternating magnetic field spanning 50 kHz to 5 MHz in the same coil by combining silicon (Si) and gallium-nitride (GaN) transistors to resolve the high spread of coil impedance and current required throughout the wide bandwidth. The system drives a liquid-cooled field coil via capacitor banks, forming three series resonance channels which are multiplexed using high-voltage contactors. We characterized the system by the output channels' frequencies, field strength, and switching time, as well as the system's overall operation stability. Using different frequency-amplitude combinations of the magnetic field to target specific magnetic nanoparticles with different coercivity, we demonstrate actuation of iron oxide nanoparticles in all three channels, including a novel nanoparticle composition responding to magnetic fields in the megahertz range.Main results.The system achieved the desired target field strengths for three frequency channels, with switching speed between channels on the order of milliseconds. Specific absorption rate measurements and infrared thermal imaging performed with three types of magnetic nanoparticles demonstrated selective heating and validated the system's intended use.Significance.The system uses a hybrid of Si and GaN transistors in bridge configuration instead of conventional amplifier circuit concepts to drive the magnetic field coil and contactors for fast switching between different capacitor banks. Series-resonance circuits ensure a high output quality while keeping the system efficient. This approach could significantly improve the speed and flexibility of frequency-multiplexed nanoparticle actuation, such as magnetogenetic neurostimulation, and thus provide the technical means for selective stimulation below the magnetic field's fundamental spatial focality limits.
Assuntos
Nanopartículas de Magnetita , Impedância Elétrica , Eletrônica , Campos Magnéticos , MagnetismoRESUMO
Implantable bioelectronic devices for the simulation of peripheral nerves could be used to treat disorders that are resistant to traditional pharmacological therapies. However, for many nerve targets, this requires invasive surgeries and the implantation of bulky devices (about a few centimetres in at least one dimension). Here we report the design and in vivo proof-of-concept testing of an endovascular wireless and battery-free millimetric implant for the stimulation of specific peripheral nerves that are difficult to reach via traditional surgeries. The device can be delivered through a percutaneous catheter and leverages magnetoelectric materials to receive data and power through tissue via a digitally programmable 1 mm × 0.8 mm system-on-a-chip. Implantation of the device directly on top of the sciatic nerve in rats and near a femoral artery in pigs (with a stimulation lead introduced into a blood vessel through a catheter) allowed for wireless stimulation of the animals' sciatic and femoral nerves. Minimally invasive magnetoelectric implants may allow for the stimulation of nerves without the need for open surgery or the implantation of battery-powered pulse generators.
Assuntos
Próteses e Implantes , Tecnologia sem Fio , Animais , Fontes de Energia Elétrica , Estudo de Prova de Conceito , Ratos , Nervo Isquiático , SuínosRESUMO
A fully automated focused infrared lightwave ashing sample preparation system was proposed and applied to the pretreatment of volatile arsenic, cadmium and lead in plant foods prior to inductively coupled plasma mass spectrometry (ICP-MS) determination. All the steps of ashing pretreatment were automatically accomplished within forty minutes. Gold-plated infrared quartz tubes produced focused infrared to supply a rapid heating. Ozone was used to accelerate sample carbonization. A cool trap was used to capture volatile arsenic, cadmium and lead. Three certified plant food reference materials were determined. The recoveries of the three elements were between 90% and 107%. Five real plant foods were analyzed by the proposed method and microwave digestion. The results showed no significant difference.
Assuntos
Arsênio/análise , Cádmio/análise , Chumbo/análise , Espectrometria de Massas/métodos , Plantas/química , Análise de Alimentos , Micro-Ondas , Oxirredução , Ozônio/química , Plantas/metabolismo , Temperatura , Compostos Orgânicos Voláteis/químicaRESUMO
An intermittent on-line concentration and separation system coupled with HG-AFS was developed to eliminate serious interferences from Cu2+, Pb2+ and Zn2+ on the determination of cadmium. In the present method, the interferences from common coexisting ions, such as Cu2+, Pb2+, Zn2+, Fe3+ and Ni2+, were greatly reduced. Under the optimized conditions, a detection limit of 3 pg ml(-1) (3sigma, n=11) and a precision of 1.9% RSD for 1 ng ml(-1) of Cd were obtained. The method was successfully applied to the determination of cadmium in a series of Chinese Geological Reference Materials (SRMs) and GBW01621 ferronickel alloy using simple aqueous standard calibration technique. The results obtained were in good agreement with the certified values.
Assuntos
Cádmio/análise , Metais Pesados/análise , Espectrofotometria Atômica/instrumentação , Espectrofotometria Atômica/métodos , Calibragem , Cobre/análise , Ácido Clorídrico/química , Hidrogênio/química , Ferro/análise , Chumbo/análise , Níquel/análise , Sensibilidade e Especificidade , Fatores de Tempo , Zinco/análiseRESUMO
Chemical vapor generation (CVG) coupled with non-dispersive atomic fluorescence spectrometry (NDAFS) has been widely used for determination of vapor-forming elements, but most of such works have been focused on single element analysis, and reports dealing with more than three elements simultaneous determination by CVG-NDAFS are rare. In this work, a sensitive and robust analytical procedure for the simultaneous determination of arsenic, antimony, bismuth and mercury in geological materials using vapor generation-four-channel non-dispersive atomic fluorescence spectrometry has been developed. The conditions of instrumentation and vapor generation of arsenic, antimony, bismuth and mercury were optimized. The optimized concentrations of KBH(4) and HCl required for analytes generation were 1.3% (m/v) and 20% (v/v), respectively. The interferences of coexisting ions and mutual hydride interferences were investigated carefully. One thousand milligrams per litre of Fe(3+); 500mgl(-1) of Pb(2+), Zn(2+), Mn(2+); 50mgl(-1) Cu(2+), Ni(2+), Cr(6+), Co(2+); 10mgl(-1) Ag(+) and 5mgl(-1) Au(3+) does not interfere with the determination of As, Sb, Bi and Hg. Associating a dilution of 1:250 (m/v) in the procedure of sample pretreatment, the tolerant concentrations of As, Sb, Bi and Hg in real geological materials are 2500, 1000, 250 and 5000ppm, respectively. Under optimal conditions, the detection limits for As, Sb, Bi and Hg were determined to be 0.068, 0.047, 0.037 and 0.008ngml(-1), respectively. The precisions for seven replicate determinations at the 5ngml(-1) of As, Sb, Bi and 1ngml(-1) of Hg were 0.47, 0.60, 0.97 and 0.93% (R.S.D.), respectively. Sample digestion was carried out on 500mg sample with 3ml HNO(3) and 10ml HCl, followed by addition of thiourea solution for the quantitative reduction of As(V), Sb(V) to As(III), Sb(III). The proposed method was successfully applied to the simultaneous determination of As, Sb, Bi and Hg in a series of certified geological reference materials using simple aqueous standard calibration technique. The results obtained are in good agreement with the certified values.
RESUMO
A new and sample technique for the simultaneous determination of trace arsenic, antimony, bismuth and selenium in biologic samples by hydride generation-four-channel nondispersive atomic fluorescence spectrometry was development. The conditions of instrumentation and hydride generation of arsenic, antimony, bismuth and selenium were optimized. For reducing hexavalent Se to the tetravalent state was to heat the sample with 6moll(-1) HCl, and then pre-reducing pentavalent As and Sb to the trivalent state was achieved by the addition of 0.05moll(-1) thiourea. The interferences of coexisting ions were evaluated. Under optimal conditions, the detection limits for As, Sb, Bi and Se were determined to be 0.03, 0.04, 0.04 and 0.03ngml(-1), respectively. The precision for seven replicate determinations at the 5ngml(-1) of As, Sb, Bi and Se were 0.9, 1.2, 1.3 and 1.5% (R.S.D.), respectively. The proposed method was successfully applied to the simultaneous determination of As, Sb, Bi and Se in a series of Chinese certified biological reference materials using simple aqueous standard calibration technique, the results obtained are in good agreement with the certified values.