RESUMO
The tumor microenvironment and cancer-associated fibroblasts (CAFs) play crucial roles in tumor development, and their metabolic coupling remains unclear. Clinical data showed a positive correlation between PDGF-BB, CAFs, and glycolysis in the tumor microenvironment of oral tongue squamous cell carcinoma patients. In vitro, CAFs are derived from hOMF cells treated with PDGF-BB, which induces their formation and promotes aerobic glycolysis. Mitophagy increased the PDGF-BB-induced formation of CAF phenotypes and aerobic glycolysis, while autophagy inhibition blocked PDGF-BB-induced effects. Downregulation of miR-26a-5p was observed in CAFs; upregulation of miR-26a-5p inhibited the expression of mitophagy-related proteins ULKI, Parkin, PINK1, and LC3 and aerobic glycolysis in PDGF-BB-induced CAFs. PDGF-BB-induced CAFs promoted tumor cell proliferation, invasion, metastasis, NF-κB signaling pathway activation, and PDGF-BB secretion. Thus, PDGF-BB is associated with lactate-induced CAF formation and glucose metabolism reprogramming. These findings indicate potential therapeutic targets in oral tongue squamous cell carcinoma.
RESUMO
BACKGROUND: Periodontitis is a chronic inflammatory condition triggered by immune system malfunction. Mitochondrial extracellular vesicles (MitoEVs) are a group of highly heterogeneous extracellular vesicles (EVs) enriched in mitochondrial fractions. The objective of this research was to examine the correlation between MitoEVs and the immune microenvironment of periodontitis. METHODS: Data from MitoCarta 3.0, GeneCards, and GEO databases were utilized to identify differentially expressed MitoEV-related genes (MERGs) and conduct functional enrichment and pathway analyses. The random forest and LASSO algorithms were employed to identify hub MERGs. Infiltration levels of immune cells in periodontitis and healthy groups were estimated using the CIBERSORT algorithm, and phenotypic subgroups of periodontitis based on hub MERG expression levels were explored using a consensus clustering method. RESULTS: A total of 44 differentially expressed MERGs were identified. The random forest and LASSO algorithms identified 9 hub MERGs (BCL2L11, GLDC, CYP24A1, COQ2, MTPAP, NIPSNAP3A, FAM162A, MYO19, and NDUFS1). ROC curve analysis showed that the hub gene and logistic regression model presented excellent diagnostic and discriminating abilities. Immune infiltration and consensus clustering analysis indicated that hub MERGs were highly correlated with various types of immune cells, and there were significant differences in immune cells and hub MERGs among different periodontitis subtypes. CONCLUSION: The periodontitis classification model based on MERGs shows excellent performance and can offer novel perspectives into the pathogenesis of periodontitis. The high correlation between MERGs and various immune cells and the significant differences between immune cells and MERGs in different periodontitis subtypes can clarify the regulatory roles of MitoEVs in the immune microenvironment of periodontitis. Future research should focus on elucidating the functional mechanisms of hub MERGs and exploring potential therapeutic interventions based on these findings.
Assuntos
Vesículas Extracelulares , Humanos , Aprendizado de Máquina , Algoritmos , Análise por Conglomerados , Biologia ComputacionalRESUMO
Direct femtosecond laser writing of ferroelectric domain structures has been an indispensable technique for engineering the second-order optical nonlinearity of materials in three dimensions. It utilizes localized thermoelectric field motivated by nonlinear absorption at the position of laser focus to manipulate domains. However, the impact of laser wavelengths, which is pivotal in nonlinear absorption, on the inverted domains is still sketchy. Herein, the light-induced ferroelectric domain inversion is experimentally studied. It is shown that the domain inversions can be achieved over a broad spectral range, but the optical threshold for domain inversion varies dramatically with the laser wavelength, which can be explained by considering the physical mechanism of femtosecond laser poling and nonlinear absorption properties of the crystal. Meanwhile, the effects of other laser processing parameters are also experimentally investigated. Our findings are useful to guide the fabrication of high-performance optical and electronic devices based on ferroelectric domains.
RESUMO
Significant attention has been given to the way in which the soil nitrogen (N) cycle responds to permafrost thaw in recent years, yet little is known about anaerobic N transformations in thermokarst lakes, which account for more than one-third of thermokarst landforms across permafrost regions. Based on the N isotope dilution and tracing technique, combined with qPCR and high-throughput sequencing, we presented large-scale measurements of anaerobic N transformations of sediments across 30 thermokarst lakes over the Tibetan alpine permafrost region. Our results showed that gross N mineralization, ammonium immobilization, and dissimilatory nitrate reduction rates in thermokarst lakes were higher in the eastern part of our study area than in the west. Denitrification dominated in the dissimilatory nitrate reduction processes, being two and one orders of magnitude higher than anaerobic ammonium oxidation (anammox) and dissimilatory nitrate reduction to ammonium (DNRA), respectively. The abundances of the dissimilatory nitrate reduction genes (nirK, nirS, hzsB, and nrfA) exhibited patterns consistent with sediment N transformation rates, while α diversity did not. The inter-lake variability in gross N mineralization and ammonium immobilization was dominantly driven by microbial biomass, while the variability in anammox and DNRA was driven by substrate supply and organic carbon content, respectively. Denitrification was jointly affected by nirS abundance and organic carbon content. Overall, the patterns and drivers of anaerobic N transformation rates detected in this study provide a new perspective on potential N release, retention, and removal upon the formation and development of thermokarst lakes.
Assuntos
Compostos de Amônio , Nitratos , Nitratos/análise , Lagos , Nitrogênio , Anaerobiose , Desnitrificação , Compostos Orgânicos , CarbonoRESUMO
Mineralization of dissolved organic matter (DOM) in thermokarst lakes plays a non-negligible role in the permafrost carbon (C) cycle, but remains poorly understood due to its complex interactions with external C and nutrient inputs (i.e., aquatic priming and nutrient effects). Based on large-scale lake sampling and laboratory incubations, in combination with 13 C-stable-isotope labeling, optical spectroscopy, and high-throughput sequencing, we examined large-scale patterns and dominant drivers of priming and nutrient effects of DOM biodegradation across 30 thermokarst lakes along a 1100-km transect on the Tibetan Plateau. We observed that labile C and phosphorus (P) rather than nitrogen (N) inputs stimulated DOM biodegradation, with the priming and P effects being 172% and 451% over unamended control, respectively. We also detected significant interactive effects of labile C and nutrient supply on DOM biodegradation, with the combined labile C and nutrient additions inducing stronger microbial mineralization than C or nutrient treatment alone, illustrating that microbial activity in alpine thermokarst lakes is co-limited by both C and nutrients. We further found that the aquatic priming was mainly driven by DOM quality, with the priming intensity increasing with DOM recalcitrance, reflecting the limitation of external C as energy sources for microbial activity. Greater priming intensity was also associated with higher community-level ribosomal RNA gene operon (rrn) copy number and bacterial diversity as well as increased background soluble reactive P concentration. In contrast, the P effect decreased with DOM recalcitrance as well as with background soluble reactive P and ammonium concentrations, revealing the declining importance of P availability in mediating DOM biodegradation with enhanced C limitation but reduced nutrient limitation. Overall, the stimulation of external C and P inputs on DOM biodegradation in thermokarst lakes would amplify C-climate feedback in this alpine permafrost region.
RESUMO
OBJECTIVE: Designed and applicated a modified customized CAD-CAM socket-shield preparation guide template in immediate implant and followed up for 3 years. CLINICAL CONSIDERATIONS: Socket-shield technique could improve the esthetic effect of immediate implant restorations by preserving the labial fascicular bone-periodontal complex at the implant site. While the socket-shield technique is highly technique-sensitive. A modified customized CAD/CAM guided template was designed and fabricated by 3D printing. The movement of the carbide bur during preparing the socket-shield was limited by the socket-shield preparation template. In this case report, the socket-shield preparation template was used for preparing the socket-shield in the tooth root with irregular morphology and the case was followed up for 3 years. CONCLUSIONS: The modified CAD/CAM socket-shield preparation template effectively improved the accuracy and efficiency of preparing the socket-shield by limiting the movement of the high-speed carbide bur in both in both lip-to-palatal and crown-to-root orientation. The socket-shield with accurate morphology could effectively maintain the gingival marginal level and contour. CLINICAL SIGNIFICANCE: The modified CAD/CAM socket-shield preparation template with the depth-locking ring effectively reduced the technique sensitivity and time consumption of the socket-shield technique, especially for tooth roots with irregular morphology.
Assuntos
Implantes Dentários para Um Único Dente , Carga Imediata em Implante Dentário , Humanos , Alvéolo Dental/cirurgia , Extração Dentária , Estética Dentária , Carga Imediata em Implante Dentário/métodos , Desenho Assistido por ComputadorRESUMO
The epitaxial growth of a perovskite matrix on quantum dots (QDs) has enabled the emergence of efficient red light-emitting diodes (LEDs) because it unites efficient charge transport with strong surface passivation. However, the synthesis of wide-band gap (Eg) QD-in-matrix heterostructures has so far remained elusive in the case of sky-blue LEDs. Here, we developed CsPbBr3 QD-in-perovskite matrix solids that enable high luminescent efficiency and spectral stability with an optical Eg of over 2.6 eV. We screened alloy candidates that modulate the perovskite Eg and allow heteroepitaxy, seeking to implement lattice-matched type-I band alignment. Specifically, we introduced a CsPb1-xSrxBr3 matrix, in which alloying with Sr2+ increased the Eg of the perovskite and minimized lattice mismatch. We then developed an approach to passivation that would overcome the hygroscopic nature of Sr2+. We found that bis(4-fluorophenyl)phenylphosphine oxide strongly coordinates with Sr2+ and provides steric hindrance to block H2O, a finding obtained by combining molecular dynamics simulations with experimental results. The resulting QD-in-matrix solids exhibit enhanced air- and photo-stability with efficient charge transport from the matrix to the QDs. LEDs made from this material exhibit an external quantum efficiency of 13.8% and a brightness exceeding 6000 cd m-2.
RESUMO
The nonlinear optical properties of emerging metal halide perovskites (MHP) materials are sufficiently intriguing that this topic has become the hotspots in the realm of material science. Hence, we investigate the third-order nonlinear optical properties of CsPbBrx/I3-x (x = 1, 2, 3) MHP nano-crystals (NCs) embedded chalcogenide glass (ChG) within a GeS2-Sb2S3 pseudo-binary system, by monitoring the composition, excitation wavelength and intensity dependencies via femtosecond Z-scan technique. We have found that the intrinsic large optical nonlinearity of ChG can be further enhanced because of the incorporation of MHP NCs, and that the optical nonlinearity of MHP-ChG containing pristine Br NCs is more pronounced compared to its counterparts with mixed Br/I NCs, due to a combination of multiple factors.
RESUMO
We first report two-dimensional (2D) perovskite Ca2Nb3O10 ultraviolet photodetectors (UV PDs), which are prepared via a facile calcination-exfoliation method. The 2D Ca2Nb3O10 PDs demonstrate high performance at 3 V at 280 nm, high responsivity (14.94 A W-1), high detectivity (8.7 × 1013 Jones), high spectral selectivity (R280/R400 = 8.84 × 103), fast speed (0.08/5.6 ms), and long-term stability, exceeding those of most reported UV PDs. Furthermore, the Ca2Nb3O10 PDs integrated with poly(ethylene terephthalate) (PET) show excellent flexibility and have high linear dynamic range (96 dB). Our work provides a general strategy for searching new UV PDs based on numerous layered niobates. The Ca2Nb3O10 nanosheets may be one of the optimum semiconductor materials for next-generation high-performance UV PDs.
RESUMO
To better understand the interaction between SARS-CoV-2 and human host and find potential ways to block the pandemic, one of the unresolved questions is that how the virus economically utilizes the resources of the hosts. Particularly, the tRNA pool has been adapted to the host genes. If the virus intends to translate its own RNA, then it has to compete with the abundant host mRNAs for the tRNA molecules. Translation initiation is the rate-limiting step during protein synthesis. The tRNAs carrying the initiation Methionine (iMet) recognize the start codon termed initiation ATG (iATG). Other normal Met-carrying tRNAs recognize the internal ATGs. The tAI of virus genes is significantly lower than the tAI of human genes. This disadvantage in translation elongation of viral RNAs must be compensated by more efficient initiation rates. In the human genome, the abundance of iMet-tRNAs to Met-tRNAs is five times higher than the iATG to ATG ratio. However, when SARS-CoV-2 infects human cells, the iMet has an 8.5-time enrichment to iATG. We collected 58 virus species and found that the enrichment of iMet is higher in all viruses compared to human. Our study indicates that the genome sequences of viruses like SARS-CoV-2 have the advantage of competing for the iMet-tRNAs with host mRNAs. The capture of iMet-tRNAs allows the fast translation initiation and the reproduction of virus itself, which compensates the lower tAI of viral genes. This might explain why the virus could rapidly translate its own RNA and reproduce itself from the sea of host mRNAs. Meanwhile, our study reminds the researchers not to ignore the mutations related to ATGs.
Assuntos
Iniciação Traducional da Cadeia Peptídica , RNA de Transferência de Metionina/metabolismo , SARS-CoV-2/fisiologia , COVID-19/virologia , Códon , Evolução Molecular , Genoma Humano , Interações Hospedeiro-Patógeno , Humanos , Mutação , Biossíntese de Proteínas , SARS-CoV-2/genéticaRESUMO
In order to satisfy the growing requirements of wearable electronic devices, 1D fiber-shaped devices with outstanding sensitivity, flexibility, and stability are urgently needed. In this study, a novel inorganic-organic heterojunction fibrous photodetector (FPD) based on poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) and highly ordered TiO2 nanotube array is fabricated, which endows a high responsivity, large external quantum efficiency, and fast response speed at 3 V bias. To further ameliorate its performance in the self-powered mode, a facile acid treatment is adopted and the assembled H-PEDOT:PSS/TiO2 FPD demonstrates outstanding self-powered properties with ≈3000% responsivity enhancement (161 mA W-1 at 0 V under 365 nm irradiation, photocurrent enhancement of ≈50 times) compared with the untreated device. It is found that the concentrated H2 SO4 post-treatment helps decrease the tube wall thickness of TiO2 and partially removes the insulated PSS component in PEDOT:PSS, leading to enhanced conductivity and facilitated charge transportation, and thereby superb responsivity/photocurrent enhancement of self-powered H-PEDOT:PSS/TiO2 FPD. This low-cost and high-performance self-powered FPD shows high potential for applications in wearable electronic devices.
RESUMO
Domestication involves dramatic phenotypic and physiological diversifications due to successive selection by breeders toward high yield and quality. Although photosynthetic nitrogen use efficiency (PNUE) is a major trait for understanding leaf nitrogen economy, it is unclear whether PNUE of cotton has been improved under domestication. Here, we investigated the effect of domestication on nitrogen allocation to photosynthetic machinery and PNUE in 25 wild and 37 domesticated cotton genotypes. The results showed that domesticated genotypes had higher nitrogen content per mass (Nm), net photosynthesis under saturated light (Asat), and PNUE but similar nitrogen content per area (Na) compared with wild genotypes. As expected, in both genotypes, PNUE was positively related to Asat but negatively correlated with Na. However, the relative contribution of Asat to PNUE was greater than the contribution from Na. Domesticated genotypes had higher nitrogen allocation to light-harvesting (NL, nitrogen in light-harvesting chlorophyll-protein complex), to bioenergetics (Nb, total nitrogen of cytochrome f, ferredoxin NADP reductase, and the coupling factor), and to Rubisco (Nr) than wild genotypes; however, the two genotype groups did not differ in PNUEp, the ratio of Asat to Np (itself the sum of NL, Nb, and Nr). Our results suggest that more nitrogen allocation to photosynthetic machinery has boosted Asat under cotton domestication. Improving the efficiency of nitrogen use in photosynthetic machinery might be future aim to enhance Asat of cotton.
Assuntos
Domesticação , Nitrogênio , Fotossíntese , Folhas de Planta/metabolismo , Ribulose-Bifosfato Carboxilase/metabolismoRESUMO
Ultraviolet(UV) photodetectors(PDs) can monitor UV radiation, enabling it to be effective for many applications, such as communication, imaging and sensing. The rapid progress on portable and wearable optoelectronic devices places a great demand on self-powered PDs. However, high-performance self-powered PDs are still limited. Herein we display a transparent and self-powered PD based on a p-CuI/n-TiO2heterojunction, which exhibits a high on-off ratio (â¼104at 310 nm) and a fast response speed (rise time/decay time = 0.11 ms/0.72 ms) without bias. Moreover, the device shows an excellent UV-selective sensitivity as a solar-blind UV PD with a high UV/visible rejection ratio (R300 nm/R400 nm= 5.3 × 102), which can be ascribed to the wide bandgaps of CuI and TiO2. This work provides a feasible route for the construction of transparent, self-powered PDs based on p-n heterojunctions.
RESUMO
Wet purification technology for nonferrous metal smelting flue gas is important for mercury removal; however, this technology produces a large amounts of spent scrubbing solution that contain mercury. The mercury in these scrubbing solutions pose a great threat to the environment. Therefore, this research provides a novel strategy for removing and recycling mercury from the scrubbing solution, which is significant for decreasing mercury pollution while also allowing for the safe disposal of wastewater and a stable supply of mercury resources. Some critical parameters for the electrochemical reduction of mercury were studied in detail. Additionally, the electrodeposition dynamics and electroreduction mechanism for mercury were evaluated. Results suggested that over 92.4% of mercury could be removed from the scrubbing solution in the form of a Hg-Cu alloy under optimal conditions within 150 min and with a current efficiency of approximately 75%. Additionally, mercury electrodeposition was a quasi-reversible process, and the controlled step was the mass transport of the reactant. A pre-conversion step from Hg(Tu)42+ to Hg(Tu)32+ before mercury electroreduction was necessary. Then, the formed Hg(Tu)32+ on the cathode surface gained electrons step by step. After electrodeposition, the mercury in the spent cathode could be recycled by thermal desorption. The results of the electrochemical reduction of mercury and subsequent recycling provides a practical and easy-to-adopt alternative for recycling mercury resources and decreasing mercury contamination.
Assuntos
Poluentes Atmosféricos , Mercúrio , Poluentes Atmosféricos/análise , Gases , Mercúrio/análise , MetaisRESUMO
Fast and effective removal of elemental mercury in a wide temperature range is critical for the smelting industry. In this work, a recyclable magnetic iron sulfide/selenide sorbent is developed to capture and recover Hg0 from smelting flue gas. Benefiting from Se doping, the Hg0 capture performance of prepared FeSxSey is significantly enhanced compared with traditional iron sulfide, especially at high temperatures. Considering the recyclability and working temperature, FeS1.32Se0.11 exhibits the best Hg0 capture performance. The average capture rate of FeS1.32Se0.11 is 3.661 µg/g/min at 80 °C and its saturation adsorption capacity is 20.216 mg/g. The flue gas compositions have almost no effect on Hg0 capture. X-ray photoelectron spectroscopy and mercury thermal programmed desorption suggest that the stable active Se-Sn2- adsorption site can combine with Hg0 to form HgSe, consequently improving Hg0 capture performance at high temperatures. After Hg0 capture, the spent FeSxSey can be collected by magnetic separation and regenerated through selective extraction, which facilitates harmless treatment and resource reuse of mercury. With the advantages of excellent Hg0 capture performance, wide operating temperature range, and remarkable recycling property, FeSxSey microparticles may be a promising sorbent for Hg0 capture in industrial applications, while opening a new avenue to realize the resource utilization toward toxic elements.
Assuntos
Mercúrio , Adsorção , Carvão Mineral , Compostos Ferrosos , Gases , TemperaturaRESUMO
Heterosis has been widely accepted as an effective strategy to increase yields in plant breeding. Notably, the chemical hybridization agent SQ-1 induces male sterility in wheat, representing a critical potential tool in hybrid seed production. However, the mechanisms underlying the male sterility induced by SQ-1 still remain poorly understood. In this study, a cyclin-dependent kinase inhibitor gene, TaICK1, which encodes a 229 amino acid protein, was identified as a potential contributor to male sterility in common wheat. The expression of TaICK1 was upregulated during the development of anthers in Xinong1376 wheat treated with SQ-1. Meanwhile, the seed setting rate was found to be significantly decreased in TaICK1 transgenic rice. Furthermore, we identified two cyclin proteins, TaCYCD2;1 and TaCYCD6;1, as interactors through yeast two-hybrid screening using TaICK1 as the bait, which were validated using bimolecular fluorescence complementation. Subcellular localization revealed that the proteins encoded by TaICK1, TaCYCD2;1, and TaCYCD6;1 were localized in the cell nucleus. The expression levels of TaCYCD2;1 and TaCYCD6;1 were lower in Xinong1376 treated with SQ-1. A further analysis demonstrated that the expression levels of OsCYCD2;1 and OsCYCD6;1 were lower in transgenic TaICK1 rice lines as well. Taken together, these results suggest that the upregulation of TaICK1, induced by SQ-1, may subsequently suppress the expression of TaCYCD2;1 and TaCYCD6;1 in anthers, resulting in male sterility. This study provides new insights into the understanding of SQ-1-induced wheat male sterility, as well as the developmental mechanisms of anthers.
Assuntos
Proteínas Inibidoras de Quinase Dependente de Ciclina/genética , Vigor Híbrido/efeitos dos fármacos , Vigor Híbrido/genética , Infertilidade das Plantas/efeitos dos fármacos , Infertilidade das Plantas/genética , Triticum/efeitos dos fármacos , Triticum/genética , Proteínas Inibidoras de Quinase Dependente de Ciclina/metabolismo , Di-Hidroxiacetona/análogos & derivados , Expressão Gênica , Glucose/análogos & derivados , Humanos , Hibridização Genética , Fenótipo , Filogenia , Melhoramento Vegetal , Plantas Geneticamente Modificadas , Ligação Proteica , Transporte Proteico , Proteínas Recombinantes , Triticum/classificaçãoRESUMO
The WUSCHEL-related homeobox (WOX) is a family of plant-specific transcription factors, with important functions, such as regulating the dynamic balance of division and differentiation of plant stem cells and plant organ development. We identified 14 distinct TaWOX genes in the wheat (Triticum aestivum L.) genome, based on a genome-wide scan approach. All of the genes under evaluation had positional homoeologs on subgenomes A, B and D except TaWUS and TaWOX14. Both TaWOX14a and TaWOX14d had a paralogous copy on the same genome due to tandem duplication events. A phylogenetic analysis revealed that TaWOX genes could be divided into three groups. We performed functional characterization of TaWOX genes based on the evolutionary relationships among the WOX gene families of wheat, rice (Oryza sativa L.), and Arabidopsis. An overexpression analysis of TaWUS in Arabidopsis revealed that it affected the development of outer floral whorl organs. The overexpression analysis of TaWOX9 in Arabidopsis revealed that it promoted the root development. In addition, we identified some interaction between the TaWUS and TaWOX9 proteins by screening wheat cDNA expression libraries, which informed directions for further research to determine the functions of TaWUS and TaWOX9. This study represents the first comprehensive data on members of the WOX gene family in wheat.
Assuntos
Genes Homeobox/genética , Genes de Plantas/genética , Proteínas de Homeodomínio/genética , Proteínas de Plantas/genética , Triticum/genética , Arabidopsis/genética , Proteínas de Arabidopsis/genética , Flores/crescimento & desenvolvimento , Regulação da Expressão Gênica no Desenvolvimento , Regulação da Expressão Gênica de Plantas , Genes Homeobox/fisiologia , Proteínas de Homeodomínio/classificação , Proteínas de Homeodomínio/metabolismo , Família Multigênica , Oryza/genética , Filogenia , Proteínas de Plantas/metabolismo , Poaceae/genética , Alinhamento de Sequência , Fatores de Transcrição/genética , Fatores de Transcrição/metabolismo , TranscriptomaRESUMO
In the past three years, machine learning (ML) in combination with density functional theory (DFT) has enabled computational screening of compounds with the goal of accelerated materials discovery. Unfortunately, DFT+ML has, until now, either relied on knowledge of the atomic positions at DFT energy minima, which are a priori unknown, or been limited to chemical spaces of modest size. Here we report a strategy that we term learning-in-templates (LiT), wherein we first define a series of space group and stoichiometry templates corresponding to hypothesized compounds and, orthogonally, we allow any list of atoms to take on any template. The LiT approach is deployed in combination with previously established position-dependent representations and performs best with the representations that rely least on the atomic positions. Since the positions of the atoms in templates are known and do not change, LiT enables us to infer the properties of interest directly; additionally, LiT allows working with increased chemical spaces, since the same elements can take on a large number of templates. Only by using LiT were we able to span 5 × 106 double-perovskite compounds and achieve an acceleration factor of 700 compared to brute-force DFT, allowing us to predict never-before-screened compounds. Our findings motivated us to synthesize a new BaCu yTa(1- y)S3 perovskite, which we show using an electron probe microanalyzer has a 5:3 molar ratio of Cu to Ta and, using powder X-ray diffraction (XRD) analysis combined with a DFT-based XRD simulation and fitting, indicate a new phase having an I4/ m space group.
RESUMO
A novel twist-direction-dependent high-order orbital angular momentum (OAM) generator based on an inflated helical photonic crystal fiber (IHPCF) was demonstrated by use of an inflation-assisted hydrogen-oxygen flame heating technique. Compared with the helical photonic crystal fiber, the IHPCF exhibits a perfect transmission dip without distinct splits, thus generating high-quality OAM±6 modes. The helical phase of the generated OAM modes is dependent on the twist direction of the IHPCF and independent of the polarization state of the input light. In addition, the polarization state of the generated OAM modes is the same as that of the input light.
RESUMO
A femtosecond-laser-induced fiber Bragg grating (FBG) usually has a higher insertion loss at the shorter wavelength than at the reflection wavelength, i.e., so-called short-wavelength loss. High-quality FBGs are inscribed in different types of small-core single-mode fibers (SMFs) by the use of femtosecond laser point-by-point technology in order to investigate the effect of the fiber core diameter on the grating inscription efficiency and on the short-wavelength loss. A lower laser pulse energy is required to achieve the same grating reflectivity in a smaller-core fiber than in a large-core fiber. The short-wavelength loss of the small-core FBG is lower than that of the large-core FBG with the same reflectivity. Furthermore, a series of FBGs with a low short-wavelength loss are inscribed in a small-core SMF along the fiber axis to achieve so-called series-integrated FBGs (SI-FBGs). Finally, the effect of the input light direction on the reflection peak of the SI-FBGs is investigated to reduce the influence of the grating short-wavelength loss in the sensing and communication applications.