Modification of flavonoids: methods and influences on biological activities.

Flavonoids are important active ingredients in plant-based food, which have many beneficial effects on health. But the low solubility, poor oral bioavailability, and inferior stability of many flavonoids may limit their applications in the food, cosmetics, and pharmaceutical industries. Structural modification can overcome these shortcomings to improve and extend the application of flavonoids. The study of how to modify flavonoids and the influence of various modifications on biological activity have drawn great interest in the current literature. In this review, the working principles and operating conditions of modification methods were summarized along with their potential and limitations in terms of operational safety, cost, and productivity. The influence of various modifications on biological activities and the structure-activity relationships of flavonoids derivatives were discussed and highlighted, which may give guidance for the synthesis of highly effective active agents. In addition, the safety of flavonoids derivatives is reviewed, and future research directions of flavonoid modification research are discussed.

Effects of cell wall polysaccharides on the bioaccessibility of carotenoids, polyphenols, and minerals: an overview.

Carotenoids, polyphenols, and minerals (CPMs) are representative bioactive compounds and micronutrients in plant-based foods, showing many potentially positive bioactivities. Bioaccessibility is a prerequisite for bioactivities of CPMs. Cell wall polysaccharides (CWPs) are major structural components of plant cell wall, and they have been proven to affect the bioaccessibility of CPMs in different ways. This review summarizes recent literatures about the effects of CWPs on the bioaccessibility of CPMs and discusses the potential mechanisms. Based on the current findings, CWPs can inhibit the bioaccessibility of CPMs in gastrointestinal tract. The effects of CWPs on the bioaccessibility of polyphenols and minerals mainly attributes to bind between them, while CWPs affect the bioaccessibility of carotenoids by changing the digestive environment. Further, this review overviews the factors (environmental conditions, CWPs properties and CPMs characteristics) affecting the interactions between CWPs and CWPs. This review may help to better design healthy and nutritious foods precisely.

Improving norbixin dispersibility and stability by liposomal encapsulation using the pH-driven method.

BACKGROUND: Norbixin, a carotenoid extracted from annatto seeds, is widely utilized as a natural pigment in foods, cosmetics and medicines. Its water solubility is relatively high under neutral or alkaline conditions but low under acidic conditions, which limits its application in some food products. RESULTS: This problem was overcome by utilizing liposomes to encapsulate the carotenoids so that they could be easily dispersed within acidic solutions. The norbixin was loaded into the liposomes using the pH-driven method. Liposomes were produced by passing aqueous phospholipid dispersions through a microfluidizer under high pressure. Norbixin was then added to the liposome dispersions at pH 7.0 and then driven into the hydrophobic domains of the phospholipid bilayers by acidifying the system. Measurements of the encapsulation efficiency showed that the norbixin was successfully loaded into the liposomes using the pH-driven method. X-ray diffraction analysis showed that the norbixin was in an amorphous state after incorporation into the liposomes. Encapsulation of norbixin within the liposomes was also shown to increase its water dispersibility and chemical stability under acidic pH conditions. CONCLUSION: The pH-driven method therefore provides a useful means of increasing the application of this bioactive carotenoid within functional foods and other products. © 2021 Society of Chemical Industry.

Entropy Enhanced Perovskite Oxide Ceramic for Efficient Electrochemical Reduction of Oxygen to Hydrogen Peroxide.

The electrochemical oxygen reduction reaction (ORR) offers a most promising and efficient route to produce hydrogen peroxide (H2 O2 ), yet the lack of cost-effective and high-performance electrocatalysts have restricted its practical application. Herein, an entropy-enhancement strategy has been employed to enable the low-cost perovskite oxide to effectively catalyze the electrosynthesis of H2 O2 . The optimized Pb(NiWMnNbZrTi)1/6 O3 ceramic is available on a kilogram-scale and displays commendable ORR activity in alkaline media with high selectivity over 91 % across the wide potential range for H2 O2 including an outstanding degradation property for organic dyes through the Fenton process. The exceptional performance of this perovskite oxide is attributed to the entropy stabilization-induced polymorphic transformation assuring the robust structural stability, decreased charge mobility as well as synergistic catalytic effects which we confirm using advanced in situ Raman, transient photovoltage, Rietveld refinement as well as finite elemental analysis.

The development and validation of a radiomic nomogram for the preoperative prediction of lung adenocarcinoma.

BACKGROUND: Accurate diagnosis of early lung cancer from small pulmonary nodules (SPN) is challenging in clinical setting. We aimed to develop a radiomic nomogram to differentiate lung adenocarcinoma from benign SPN. METHODS: This retrospective study included a total of 210 pathologically confirmed SPN (≤ 10 mm) from 197 patients, which were randomly divided into a training dataset (n = 147; malignant nodules, n = 94) and a validation dataset (n = 63; malignant nodules, n = 39). Radiomic features were extracted from the cancerous volumes of interest on contrast-enhanced CT images. The least absolute shrinkage and selection operator (LASSO) regression was used for data dimension reduction, feature selection, and radiomic signature building. Using multivariable logistic regression analysis, a radiomic nomogram was developed incorporating the radiomic signature and the conventional CT signs observed by radiologists. Discrimination and calibration of the radiomic nomogram were evaluated. RESULTS: The radiomic signature consisting of five radiomic features achieved an AUC of 0.853 (95% confidence interval [CI]: 0.735-0.970), accuracy of 81.0%, sensitivity of 82.9%, and specificity of 77.3%. The two conventional CT signs achieved an AUC of 0.833 (95% CI: 0.707-0.958), accuracy of 65.1%, sensitivity of 53.7%, and specificity of 86.4%. The radiomic nomogram incorporating the radiomic signature and conventional CT signs showed an improved AUC of 0.857 (95% CI: 0.723-0.991), accuracy of 84.1%, sensitivity of 85.4%, and specificity of 81.8%. The radiomic nomogram had good calibration power. CONCLUSION: The radiomic nomogram might has the potential to be used as a non-invasive tool for individual prediction of SPN preoperatively. It might facilitate decision-making and improve the management of SPN in the clinical setting.

Computed Tomography-Based Radiomic Features for Diagnosis of Indeterminate Small Pulmonary Nodules.

OBJECTIVE: This study aimed to determine the potential of radiomic features extracted from preoperative computed tomography to discriminate malignant from benign indeterminate small (≤10 mm) pulmonary nodules. METHODS: A total of 197 patients with 210 nodules who underwent surgical resections between January 2011 and March 2017 were analyzed. Three hundred eighty-five radiomic features were extracted from the computed tomographic images. Feature selection and data dimension reduction were performed using the Kruskal-Wallis test, Spearman correlation analysis, and principal component analysis. The random forest was used for radiomic signature building. The receiver operating characteristic curve analysis was used to evaluate the model performance. RESULTS: Fifteen principal component features were selected for modeling. The area under the curve, sensitivity, specificity, and accuracy of the prediction model were 0.877 (95% confidence interval [CI], 0.795-0.959), 81.8% (95% CI, 72.0%-90.9%), 77.4% (95% CI, 63.9%-89.3%), and 80.0% (95% CI, 72.0%-86.7%) in the validation cohort, respectively. CONCLUSIONS: Computed tomography-based radiomic features showed good discriminative power for benign and malignant indeterminate small pulmonary nodules.

Effects of CuO addition on the sinterability and electric properties in PbNb2O6-based ceramics.

PbNb2O6 (PN)-based ceramics with tungsten bronze structure are promising piezoelectric materials in high-temperature devices such as piezoelectric vibration transducers. However, the PN-based ceramics usually exhibit a low bulk density, which greatly limits their practical applications. In this work, CuO was used as the sintering aid to form a liquid-phase bridge, leading to an obvious increase of the bulk density of PN-based ceramics by 11% (from 5.25 to 5.85 g cm-3) and the improvement of the piezoelectric constant (d 33) (from 168 to 190 pC/N) and the Curie temperature (T C) from 367 to 395 °C. The positive influence of CuO on densification has been proved by SEM and fracture toughness. The XRD patterns confirmed that there was no secondary phase introduced by CuO addition. The Raman spectra revealed that part of Cu2+ ions has probably diffused into host lattice of the PN and preferred to occupy on A-sites. These results not only demonstrate the high potential of the CuO added PN-based ceramics for high-temperature piezoelectric applications, but also reveal the corresponding structure-properties relationship as well as provide a way to improve the sinterability, d 33, and T C simultaneously.

The Multivesicular Bodies (MVBs)-Localized AAA ATPase LRD6-6 Inhibits Immunity and Cell Death Likely through Regulating MVBs-Mediated Vesicular Trafficking in Rice.

Previous studies have shown that multivesicular bodies (MVBs)/endosomes-mediated vesicular trafficking may play key roles in plant immunity and cell death. However, the molecular regulation is poorly understood in rice. Here we report the identification and characterization of a MVBs-localized AAA ATPase LRD6-6 in rice. Disruption of LRD6-6 leads to enhanced immunity and cell death in rice. The ATPase activity and homo-dimerization of LRD6-6 is essential for its regulation on plant immunity and cell death. An ATPase inactive mutation (LRD6-6E315Q) leads to dominant-negative inhibition in plants. The LRD6-6 protein co-localizes with the MVBs marker protein RabF1/ARA6 and interacts with ESCRT-III components OsSNF7 and OsVPS2. Further analysis reveals that LRD6-6 is required for MVBs-mediated vesicular trafficking and inhibits the biosynthesis of antimicrobial compounds. Collectively, our study shows that the AAA ATPase LRD6-6 inhibits plant immunity and cell death most likely through modulating MVBs-mediated vesicular trafficking in rice.

Pectin modifications: a review.

In recent years, the interest in studying modification of pectin has increased. A number of hydroxyl and carboxyl groups distributed along the backbone as well as a certain amount of neutral sugars presented as side chains make pectin capable of preparing a broad spectrum of derivatives. By forming pectin derivatives, their properties may be modified and some other new functional properties may be created. This article attempts to review the information about various methods used for pectin modification, including substitution (alkylation, amidation, quaternization, thiolation, sulfation, oxidation, etc.), chain elongation (cross-linking and grafting) and depolymerization (chemical, physical, and enzymatic degradation). Characteristics and applications of some pectin derivatives are also presented. In addition, the safety and regulatory status of pectin and its derivatives were reviewed.

Physicochemical Characterization and Biological Properties of Polysaccharides from Alpiniae oxyphyllae Fructus.

Polysaccharides (AOPs) were extracted from Alpiniae oxyphyllae fructus using three distinct methods: hot water (AOP-HW), hydrochloric acid (AOP-AC), and NaOH/NaBH4 (AOP-AL). This study systematically investigated and compared the physicochemical properties, structural characteristics, antioxidant activities, and α-amylase inhibitory activities of the extracted polysaccharides. Among the three AOPs, AOP-AC exhibited the highest yield (13.76%) and neutral sugar content (80.57%), but had the lowest molecular weight (121.28 kDa). Conversely, AOP-HW had the lowest yield (4.54%) but the highest molecular weight (385.42 kDa). AOP-AL was predominantly composed of arabinose (28.42 mol%), galacturonic acid (17.61 mol%), and galactose (17.09 mol%), while glucose was the major sugar in both AOP-HW (52.31 mol%) and AOP-AC (94.77 mol%). Functionally, AOP-AL demonstrated superior scavenging activities against DPPH, hydroxyl, and ABTS radicals, whereas AOP-AC exhibited the strongest inhibitory effect on α-amylase. These findings indicate that the extraction solvent significantly influences the physicochemical and biological properties of AOPs, thus guiding the selection of appropriate extraction methods for specific applications. The results of this study have broad implications for industries seeking natural polysaccharides with antioxidant and enzymatic inhibitory properties.

Enhancing Electromechanical Properties of PZT-Based Piezoelectric Ceramics by High-Temperature Poling for High-Power Applications.

Defect engineering is a proven method to tune the properties of perovskite oxides. In demanding high-power piezoelectric ceramic applications, acceptor doping is the most effective method to harden ceramics, but it inevitably degrades the ceramics' electromechanical properties. Herein, a poling method based on acceptor doping, namely, high-temperature poling, is implemented by applying an electric field above the Curie temperature for poling to achieve a balance of the properties of piezoelectric coefficient d33 and mechanical quality factor Qm. After high-temperature poling, the piezoelectric property of 0.6 mol % Mn-doped Pb0.92Sr0.08(Zr0.533Ti0.443Nb0.024)O3 is d33 = 483 pC/N and Qm = 448. Compared with the traditional poling, the piezoelectric coefficient d33 of the high-temperature poling ceramics increased by approximately 40%, and Qm also increased by nearly 18%. Therefore, high d33 and Qm were exhibited by our PZT piezoelectric ceramics. Rayleigh's law analysis, XRD, and transmission electron microscopy analysis show that, after high-temperature poling, the considerably increased d33 is related to the large increase in the reversible domain wall motion in the intrinsic effect, while the slightly increased Qm is related to the inhibited irreversible domain wall motion in the extrinsic effect. This study reports a method for high-temperature poling and provides insights into the design of high-power piezoelectric ceramics with high d33 and Qm.

High-performance ultrasonic transducer based on PZT piezoelectric ceramic for high-temperature NDE.

Piezoelectric ultrasonic transducers (PUT) are applied in a wide range of fields such as non-destructive evaluation (NDE), medical imaging and petroleum exploration, etc. Nevertheless, most PUTs cannot achieve high performance and high operating temperatures simultaneously because of the inverse correlation between piezoelectric property and operating temperature. In this paper, a high-performance ultrasonic transducer based on PZT-5A type piezoelectric ceramic (S35) for high-temperature NDE over 300 °C was proposed. Firstly, it is found that the d33, kp, and kt of the S35 ceramic plate show great temperature stability from 50 °C to 300 °C, which is attributed to the stabilisation of the phase structure and no occurrence of obvious depolarization behavior before the Curie temperature. And then, a single-element PUT based on S35 was fabricated, and pulse-echo tests from 50 °C to 300 °C in confined heating environments were executed. The peak-to-peak value (Vpp) varies from 2.58 V to 0.753 V, which results from the increase of the permittivity of the piezoelectric element and the degradation of the acoustic contact, and the -6dB BW demonstrates excellent temperature stability with a variation less than 10%. These results indicate the great potential of this high-performance ultrasonic transducer for high-temperature NDE.

Structure characteristics and physicochemical property of starch, dietary fiber, protein in purple corn flour modified by low temperature impact mill.

The structural changes of macromolecules (starch, dietary fiber and protein) in purple corn flour (PCF) modified by a low temperature impact mill (LTIM) at different air classifier speed (ACS) were investigated. LTIM changed the multi-scale structure of starch, which was characterized by increased starch damage, stronger destruction of relative crystallinity (from 37.85 % to 15.53 %) and short-range ordered structure (R1047/1022, from 1.21 to 0.73) with the increased ACS. The structure of dietary fiber was also destroyed on multi-level, including decreased particle size, destructive morphology, and slightly changed crystalline structure. Additionally, LTIM showed high damage on the senior structure (surface hydrophobicity, disulfide bond, secondary structure) of protein. Due to the structure changes modified by LTIM, starch, dietary fiber and protein played different role on hydration property of PCF. Starch had positive effect, while dietary fiber and protein had negative effect. Our experimental results may provide valuable information for further analysis of other quality changes (oil holding capacity, cation exchange capacity, ability to produce high-quality dough or end-out products, etc.) of purple corn flour after LTIM treatment.

Developing industry-scale microfluidization for cell disruption, biomolecules release and bioaccessibility improvement of Chlorella pyrenoidosa.

To facilitate biomolecules extraction and bioaccessibility of Chlorella pyrenoidosa, a novel industry-scale microfluidization (ISM) was used to disrupt cells effectively. Microscope images showed ISM damaged cell integrity, disorganized cell wall structure, pulverized cell membrane and promoted the release of intracellular components. The decrease of particle size and the increase of ζ-potential also confirmed the cell disruption. The cell breakage ratio of sample treated at 120 MPa was 98%. Compared with untreated samples, total soluble solid content and protein extraction rate of the sample treated at 120 MPa increased by 2 °Brix and 12%. Protein was degraded by ISM, the release of intracellular protein and the reduction of molecular weight increased protein digestibility by 20% in in vitro gastric phase. Lipid yield and chlorophyll b content were also increased by ISM. These results provided a new solution to cell disruption of microalgae and expanded the application field of ISM.

Significantly Enhanced Electrostrain in Oriented Epitaxial Self-Assembled Aurivillius-Type Piezoelectric Films via Regulating Polarization Vectors.

High-temperature piezoelectric films with excellent piezoelectric and ferroelectric properties lay the foundation for the development of high-temperature piezo-MEMS devices. However, due to the poor piezoelectricity and strong anisotropy, it remains a challenge to obtain high quality Aurivillius-type high-temperature piezoelectric films with high performance, which impedes their practical implements. Here, a feasible polarization vector regulation strategy associated with oriented epitaxial self-assembled nanostructures for enhancing electrostrain is proposed. Guided by lattice matching relation, non-c-axis oriented epitaxial self-assembled Aurivillius-type calcium bismuth niobate (CaBi2Nb2O9, CBN) high-temperature piezoelectric films were successfully prepared on different oriented Nb-STO substrates. By the lattice matching relationship, hysteresis measurement, and piezoresponse force microscopy analysis, it is confirmed that the polarization vectors transform from a two-dimensional plane to a three-dimensional space, and the out-of-plane polarization switching is enhanced. A platform for more possible polarization vectors is provided in the self-assembled (013)CBN film. More importantly, enhanced ferroelectric (Pr ∼ 13.4 µC/cm2) and large strain (∼0.24%) were obtained in the (013)CBN film, which promotes the great application prospect of CBN piezoelectric films in high-temperature MEMS devices.

Semi-Supervised Segmentation of Interstitial Lung Disease Patterns from CT Images via Self-Training with Selective Re-Training.

Accurate segmentation of interstitial lung disease (ILD) patterns from computed tomography (CT) images is an essential prerequisite to treatment and follow-up. However, it is highly time-consuming for radiologists to pixel-by-pixel segment ILD patterns from CT scans with hundreds of slices. Consequently, it is hard to obtain large amounts of well-annotated data, which poses a huge challenge for data-driven deep learning-based methods. To alleviate this problem, we propose an end-to-end semi-supervised learning framework for the segmentation of ILD patterns (ESSegILD) from CT images via self-training with selective re-training. The proposed ESSegILD model is trained using a large CT dataset with slice-wise sparse annotations, i.e., only labeling a few slices in each CT volume with ILD patterns. Specifically, we adopt a popular semi-supervised framework, i.e., Mean-Teacher, that consists of a teacher model and a student model and uses consistency regularization to encourage consistent outputs from the two models under different perturbations. Furthermore, we propose introducing the latest self-training technique with a selective re-training strategy to select reliable pseudo-labels generated by the teacher model, which are used to expand training samples to promote the student model during iterative training. By leveraging consistency regularization and self-training with selective re-training, our proposed ESSegILD can effectively utilize unlabeled data from a partially annotated dataset to progressively improve the segmentation performance. Experiments are conducted on a dataset of 67 pneumonia patients with incomplete annotations containing over 11,000 CT images with eight different lung patterns of ILDs, with the results indicating that our proposed method is superior to the state-of-the-art methods.

Extraction, characterization and spontaneous gelation mechanism of pectin from Nicandra physaloides (Linn.) Gaertn seeds.

Nicandra physaloides (Linn.) Gaertn seeds (NPGS) could be manually scrubbed to obtain water-soluble pectin, which forms gel at room temperature without additives. The extraction, characterization and spontaneous gelation (SG) mechanism of the pectin were studied. The results showed that the pectin was located on the surface of NPGS and easily to be dissolved. Chemically, the pectin was low methoxy pectin with esterification degree of 46.93%, Gal-A content of 65.80%, and average molar weight of 631.15 kDa. The SG occurred at the pectin concentration of 1.5%, it can be destroyed by urea and SDS, however, EDTA cannot. In addition, KCl and NaCl induced the gelation of 1.0% pectin solution and the ions of K, Mg, Ca and Na were detected in the pectin. Hydrogen bonding, electrostatic and hydrophobic interaction contributed to the SG. This study could promote the commercial applications of the pectin in the field of edible colloids and cosmetics.

Synergistic Anti-Inflammatory Effects of Lipophilic Grape Seed Proanthocyanidin and Camellia Oil Combination in LPS-Stimulated RAW264.7 Cells.

Combination drug therapy has become an effective strategy to control inflammation. Lipophilic grape seed proanthocyanidin (LGSP) and camellia oil (CO) have been independently investigated to show anti-inflammatory effects, but their synergistic anti-inflammatory effects are unknown. The aim of this study was to investigate the synergistic anti-inflammatory effects of LGSP and CO. The anti-inflammatory activity of LGSP and CO individual or in combination on RAW264.7 cells was detected by MTT assay, Griess reagent, RT-PCR, 2',7'-dichlorfluoroescein diacetate and Western blot analysis. The combined treatment of LGSP with CO (20 µg/mL and 1 mg/mL) synergistically suppressed the production of NO, TNF-α, IL-6 and ROS. Further studies showed that the synergistic effect was attributed to their suppression of the activation of NF-κB and MAPK signaling pathways. Overall, our findings demonstrate the potential synergistic effect between LGSP and CO in LPS-induced inflammation.

Disintegrating the Structure and Improving the Functionalities of Pea Fiber by Industry-Scale Microfluidizer System.

In the food industry, the most prominent and concerned points in the application of dietary fiber are hydration properties and oil absorption capacity. The target of this work was to investigate the impact of a novel industry-scale microfluidizer system (ISMS) on the changing structures and functionalities of pea fiber. Different ISMS treatment intensity (0-120 MPa for one pass and 120 MPa for two passes) was applied to treat pea fiber. ISMS treatment induced the reduction in particle size and the transformation of big compact blocks to loose flakes, and the destruction of the original ordered cellulose structure caused the decline of crystallinity. Meanwhile, the hydration properties of pea fiber were improved, and pre-pulverizer and industry-scale microfluidizer treatment together increased the swelling capacity and water retention capacity of fiber. The oil holding capacity of ISMS-treated fiber was increased to more than double the original one. The elevated functionalities of pea fiber by ISMS treatment could be attributed to loosening structure, exposing more surface area, and disordering the crystalline structure, which increased the sites of water binding and oil adsorption. These findings suggested that ISMS could be applied as an effective industrial technique to the disintegrate structure and improve the functionalities of pea fiber, so as to widen the application of pea fibers in foods.

Hydrogels assembled from hybrid of whey protein amyloid fibrils and gliadin nanoparticles for curcumin loading: Microstructure, tunable viscoelasticity, and stability.

Food grade hydrogel has become an ideal delivery system for bioactive substances and attracted wide attention. Hybrids of whey protein isolate amyloid fibrils (WPF) and gliadin nanoparticles (GNP) were able to assemble into WPF-GNP hydrogel at a low protein concentration of 2 wt%, among which WPF and GNP were fabricated from the hydrolysis of whey protein isolate under 85°C water bath (pH 2.0) and antisolvent precipitation, respectively. Atomic force microscope (AFM) images indicated that the ordered nanofibrillar network of WPF was formed at pH 2.0 with a thickness of about 10 nm. Cryo-SEM suggested that WPF-GNP hydrogel could arrest GNP within the fibrous reticular structure of the partially deformed WPF, while the hybrids of native whey protein isolate (WPI) and GNP (WPI-GNP hybrids) only led to protein aggregates. WPF-GNP hydrogel formed at pH 4.0 (85°C, 3 h, WPF:GNP = 4:1) possessed the largest elastic modulus (G' = 419 Pa), which far exceeded the elastic modulus of the WPI-GNP hybrids (G' = 16.3 Pa). The presence of NaCl could enhance the strength of WPF-GNP hydrogel and the largest value was achieved at 100 mM NaCl (∼105 mPa) in the range of 0∼500 mM due to electrostatic screening. Moreover, WPF-GNP hydrogel showed a high encapsulation efficiency for curcumin, 89.76, 89.26, 89.02, 85.87, and 79.24% for pH 2.0, 3.0, 4.0, 5.0, and 6.0, respectively, which suggested that the formed hydrogel possess good potential as a delivery system. WPF-GNP hydrogel also exhibited a good protection effect on the photodegradation stability of the loaded curcumin with the retention of up to 75.18% after hydrogel was exposed to ultraviolet radiation for 7 days. These results suggested that the viscoelasticity of WPF-GNP hydrogel was tunable via pH-, ion-, or composition-adjustment and the hydrogel showed excellent protection on the thermal and photodegradation stability of curcumin.