Long-range order enabled stability in quantum dot light-emitting diodes.

Light-emitting diodes (LEDs) based on perovskite quantum dots (QDs) have produced external quantum efficiencies (EQEs) of more than 25% with narrowband emission1,2, but these LEDs have limited operating lifetimes. We posit that poor long-range ordering in perovskite QD films-variations in dot size, surface ligand density and dot-to-dot stacking-inhibits carrier injection, resulting in inferior operating stability because of the large bias required to produce emission in these LEDs. Here we report a chemical treatment to improve the long-range order of perovskite QD films: the diffraction intensity from the repeating QD units increases three-fold compared with that of controls. We achieve this using a synergistic dual-ligand approach: an iodide-rich agent (aniline hydroiodide) for anion exchange and a chemically reactive agent (bromotrimethylsilane) that produces a strong acid that in situ dissolves smaller QDs to regulate size and more effectively removes less conductive ligands to enable compact, uniform and defect-free films. These films exhibit high conductivity (4 × 10-4 S m-1), which is 2.5-fold higher than that of the control, and represents the highest conductivity recorded so far among perovskite QDs. The high conductivity ensures efficient charge transportation, enabling red perovskite QD-LEDs that generate a luminance of 1,000 cd m-2 at a record-low voltage of 2.8 V. The EQE at this luminance is more than 20%. Furthermore, the stability of the operating device is 100 times better than previous red perovskite LEDs at EQEs of more than 20%.

Interactions between nonfullerene acceptors lead to unstable ternary organic photovoltaic cells.

For organic photovoltaic (OPV) devices to achieve consistent performance and long operational lifetimes, organic semiconductors must be processed with precise control over their purity, composition, and structure. This is particularly important for high volume solar cell manufacturing where control of materials quality has a direct impact on yield and cost. Ternary-blend OPVs containing two acceptor-donor-acceptor (A-D-A)-type nonfullerene acceptors (NFAs) and a donor have proven to be an effective strategy to improve solar spectral coverage and reduce energy losses beyond that of binary-blend OPVs. Here, we show that the purity of such a ternary is compromised during blending to form a homogeneously mixed bulk heterojunction thin film. We find that the impurities originate from end-capping C=C/C=C exchange reactions of A-D-A-type NFAs, and that their presence influences both device reproducibility and long-term reliability. The end-capping exchange results in generation of up to four impurity constituents with strong dipolar character that interfere with the photoinduced charge transfer process, leading to reduced charge generation efficiency, morphological instabilities, and an increased vulnerability to photodegradation. As a consequence, the OPV efficiency falls to less than 65% of its initial value within 265 h when exposed to up to 10 suns intensity illumination. We propose potential molecular design strategies critical to enhancing the reproducibility as well as reliability of ternary OPVs by avoiding end-capping reactions.

Polarity-Mediated Antisolvent Control Enables Efficient Lanthanide-Based near-Infrared Perovskite LEDs.

Alloying lanthanide ions (Yb3+) into perovskite quantum dots (Yb3+:CsPb(Cl1-xBrx)3) is an effective method to achieve efficient near-infrared (NIR) luminescence (>950 nm). Increasing the Yb3+ alloying ratio in the perovskite matrix enhances the luminescence intensity of Yb3+ emission at 990 nm. However, high Yb3+ alloying (>15%) results in vacancy-induced inferior material stability. In this work, we developed a polarity-mediated antisolvent manipulation strategy to resolve the incompatibility between a high Yb3+ alloying ratio and inferior stability of Yb3+:CsPb(Cl1-xBrx)3. Precise control of solution polarity enables increased uniformity of the perovskite matrix with fewer trap densities. Employing this strategy, we obtain Yb3+:CsPb(Cl1-xBrx)3 with the highest Yb3+ alloying ratio of 30.2% and a 2-fold higher electroluminescence intensity at 990 nm. We lever the engineered Yb3+:CsPb(Cl1-xBrx)3 to fabricate NIR-LEDs, achieving a peak external quantum efficiency (EQE) of 8.5% at 990 nm: this represents the highest among perovskite NIR-LEDs with an emission wavelength above 950 nm.

Customizable Organic Charge-Transfer Cocrystals for the Dual-Mode Optoelectronics in the NIR (II) Window.

Organic molecules have been regarded as ideal candidates for near-infrared (NIR) optoelectronic active materials due to their customizability and ease of large-scale production. However, constrained by the intricate molecular design and severe energy gap law, the realization of optoelectronic devices in the second near-infrared (NIR (II)) region with required narrow band gaps presents more challenges. Herein, we have originally proposed a cocrystal strategy that utilizes intermolecular charge-transfer interaction to drive the redshift of absorption and emission spectra of a series BFXTQ (X = 0, 1, 2, 4) cocrystals, resulting in the spectra located at NIR (II) window and reducing the optical bandgap to ∼0.98 eV. Significantly, these BFXTQ-based optoelectronic devices can exhibit dual-mode optoelectronic characteristics. An investigation of a series of BFXTQ-based photodetectors exhibits detectivity (D*) surpassing 1013 Jones at 375 to 1064 nm with a maximum of 1.76 × 1014 Jones at 1064 nm. Moreover, the radiative transition of CT excitons within the cocrystals triggers NIR emission over 1000 nm with a photoluminescence quantum yield (PLQY) of ∼4.6% as well as optical waveguide behavior with a low optical-loss coefficient of 0.0097 dB/µm at 950 nm. These results promote the advancement of an emerging cocrystal approach in micro/nanoscale NIR multifunctional optoelectronics.

Bilateral Production Shield Enabling Highly Efficient Perovskite Photovoltaics.

Enhancing the intrinsic stability of perovskite and through encapsulation to isolate water, oxygen, and UV-induced decomposition are currently common and most effective strategies in perovskite solar cells. Here, the atomic layer deposition process is employed to deposit a nanoscale (≈100 nm), uniform, and dense Al2O3 film on the front side of perovskite devices, effectively isolating them from the erosion caused by water and oxygen in the humid air. Simultaneously, nanoscale (≈100 nm) TiO2 films are also deposited on the glass surface to efficiently filter out the ultraviolet (UV) light in the light source, which induces degradation in perovskite. Ultimately, throughthe collaborative effects of both aspects, the stability of the devices is significantly improved under conditions of humid air and illumination. As a result, after storing the devices in ambient air for 1000 h, the efficiency only declines to 95%, and even after 662 h of UV exposure, the efficiency remains at 88%, far surpassing the performance of comparison devices. These results strongly indicate that the adopted Al2O3 and TiO2 thin films play a significant role in enhancing the stability of perovskite solar cells, demonstrating substantial potential for widespread industrial applications.

Two new quinazoline alkaloids produced by Aspergillus versicolor and their antimicrobial activities.

Two new quinazoline alkaloids versicomides G-H (1 and 2), together with seven known compounds, were isolated from Aspergillus versicolor HYQZ-215 obtained from the sediment of Qarhan Salt Lake. Their structures were elucidated by NMR, HRESIMS, and quantum chemical ECD calculations data. The antimicrobial activities of these compounds were evaluated against seven agricultural pathogenic fungi and eight clinically drug-resistant bacteria.

Flexible Substrate-Compatible and Efficiency-Improved Quantum-Dot Light-Emitting Diodes with Reduced Annealing Temperature of NiOx Hole-Injecting Layer.

The growing demand for wearable and attachable displays has sparked significant interest in flexible quantum-dot light-emitting diodes (QLEDs). However, the challenges of fabricating and operating QLEDs on flexible substrates persist due to the lack of stable and low-temperature processable charge-injection/-transporting layers with aligned energy levels. In this study, we utilized NiOx nanoparticles that are compatible with flexible substrates as a hole-injection layer (HIL). To enhance the work function of the NiOx HIL, we introduced a self-assembled dipole modifier called 4-(trifluoromethyl)benzoic acid (4-CF3-BA) onto the surface of the NiOx nanoparticles. The incorporation of the dipole molecules through adsorption treatment has significantly changed the wettability and electronic characteristics of NiOx nanoparticles, resulting in the formation of NiO(OH) at the interface and a shift in vacuum level. The alteration of surface electronic states of the NiOx nanoparticles not only improves the carrier balance by reducing the hole injection barrier but also prevents exciton quenching by passivating defects in the film. Consequently, the NiOx-based red QLEDs with interfacial modification demonstrate a maximum current efficiency of 16.1 cd/A and a peak external quantum efficiency of 10.3%. This represents a nearly twofold efficiency enhancement compared to control devices. The mild fabrication requirements and low annealing temperatures suggest potential applications of dipole molecule-modified NiOx nanoparticles in flexible optoelectronic devices.

Ligand-solvent coordination enables comprehensive trap passivation for efficient quantum dot near-infrared light-emitting diodes.

Near-infrared light-emitting diodes (NIR LEDs) based on perovskite quantum dots (QDs) have produced external quantum efficiency (EQE) of ~15%. However, these high-performance NIR-QLEDs suffer from immediate carrier quenching because of the accumulation of migratable ions at the surface of the QDs. These uncoordinated ions and carriers - if not bound to the nanocrystal surface - serve as centers for exciton quenching and device degradation. In this work, we overcome this issue and fabricate high-performance NIR QLEDs by devising a ligand anchoring strategy, which entails dissolving the strong-binding ligand (Guanidine Hydroiodide, GAI) in the mediate-polar solvent. By employing the dye-sensitized device structure (phosphorescent indicator), we demonstrate the elimination of the interface defects. The treated QDs films exhibit an exciton binding energy of 117 meV: this represents a 1.5-fold increase compared to that of the control (74 meV). We report, as a result, the NIR QLEDs with an EQE of 21% which is a record among NIR perovskite QLEDs. These QLEDs also exhibit a 7-fold higher operational stability than that of the best previously reported NIR QLEDs. Furthermore, we demonstrate that the QDs are compatible with large-area QLEDs: we showcase 900 mm2 QLEDs with EQE approaching 20%.

Linearly Arranged Multi-π-Stacked Structure for Efficient Through-Space Charge-Transfer Emitters.

Noncovalent spatial interaction has become an intriguing and important tool for constructing optoelectronic molecules. In this study, we linearly attached three conjugated units in a multi π-stacked manner by using just one trident bridge based on indeno[2,1-b]fluorene. To achieve this structure, we improved the synthetic approach through double C-H activation, significantly simplifying the preparation process. Due to the proximity of the C10, C11, and C12 sites in indeno[2,1-b]fluorene, we derived two novel donor|acceptor|donor (D|A|D) type molecules, 2DMB and 2DMFB, which exhibited closely packed intramolecular stacking, enabling efficient through-space charge transfer. This molecular construction is particularly suitable for developing high-performance thermally activated delayed fluorescence materials. With donor(s) and acceptor(s) constrained and separated within this spatially rigid structure, elevated radiative transition rates, and high photoluminescence quantum yields were achieved. Organic light-emitting diodes incorporating 2DMB and 2DMFB demonstrated superior efficiency, achieving maximum external quantum efficiencies of 28.6% and 16.2%, respectively.

Effects of Deuterium Isotopes on Pt(II) Complexes and Their Impact on Organic NIR Emitters.

Insight into effect of deuterium isotopes on organic near-IR (NIR) emitters was explored by the use of self-assembled Pt(II) complexes H-3-f and HPh-3-f, and their deuterated analogues D-3-f and DPh-3-f, respectively (Scheme 2). In vacuum deposited thin film, albeit having nearly identical emission spectral feature maximized at ~810 nm, H-3-f and D-3-f exhibit remarkable difference in photoluminescence quantum yield (PLQY) of 29 % and 50 %, respectively. Distinction in PLQY is also observed for HPh-3-f (800 nm, 50 %) and DPh-3-f (798 nm, 67 %). We then elucidated the theoretical differences in the impact on near-infrared (NIR) luminescence between Pt(II) complexes and organic small molecules upon deuteration. The results establish a general guideline for the deuteration on NIR emission efficiency. From a perspective of practical application, NIR OLEDs based on D-3-f and DPh-3-f emitters attain EQEmax of 15.5 % (radiance 31,287 mW Sr-1 m-2 ) and 16.6 % (radiance of 32,279 mW Sr-1 m-2 ) at 764 nm and 796 nm, respectively, both of which set new records for NIR OLEDs of >750 nm.

Glycan Stability and Flexibility: Thermodynamic and Kinetic Characterization of Nonconventional Hydrogen Bonding in Lewis Antigens.

We provide evidence for CH-based nonconventional hydrogen bonds (H-bonds) for 10 Lewis antigens and two of their rhamnose analogues. We also characterize the thermodynamics and kinetics of the H-bonds in these molecules and present a plausible explanation for the presence of nonconventional H-bonds in Lewis antigens. Using an alternative method to simultaneously fit a series of temperature-dependent fast exchange nuclear magnetic resonance (NMR) spectra, we determined that the H-bonded conformation is favored by ∼1 kcal/mol over the non-H-bonded conformation. Additionally, a comparison of temperature-dependent 13C linewidths in various Lewis antigens and the two rhamnose analogues reveals H-bonds between the carbonyl oxygen of the N-acetyl group of N-acetylglucosamine and the OH2 group of galactose/fucose. The data presented herein provide insight into the contribution of nonconventional H-bonding to molecular structure and could therefore be used for the rational design of therapeutics.

Bifunctional Electron-Transporting Agent for Red Colloidal Quantum Dot Light-Emitting Diodes.

Indium phosphide (InP) quantum dots have enabled light-emitting diodes (LEDs) that are heavy-metal-free, narrow in emission linewidth, and physically flexible. However, ZnO/ZnMgO, the electron-transporting layer (ETL) in high-performance red InP/ZnSe/ZnS LEDs, suffers from high defect densities, quenches luminescence when deposited on InP, and induces performance degradation that arises due to trap migration from the ETL to the InP emitting layer. We posited that the formation of Zn2+ traps on the outer ZnS shell, combined with sulfur and oxygen vacancy migration between ZnO/ZnMgO and InP, may account for this issue. We synthesized therefore a bifunctional ETL (CNT2T, 3',3'″,3'″″-(1,3,5-triazine-2,4,6-triyl)tris(([1,1'-biphenyl]-3-carbonitrile)) designed to passivate Zn2+ traps locally and in situ and to prevent vacancy migration between layers: the backbone of the small molecule ETL contains a triazine electron-withdrawing unit to ensure sufficient electron mobility (6 × 10-4 cm2 V-1 s-1), and the star-shaped structure with multiple cyano groups provides effective passivation of the ZnS surface. We report as a result red InP LEDs having an EQE of 15% and a luminance of over 12,000 cd m-2; this represents a record among organic-ETL-based red InP LEDs.

Thermochromic Ni(II) Organometallics With High Optical Transparency and Low Phase-Transition Temperature for Energy-Saving Smart Windows.

Thermochromic smart windows with rational modulation in indoor temperature and brightness draw considerable interest in reducing building energy consumption, which remains a huge challenge to meet the comfortable responsive temperature and the wide transmittance modulation range from visible to near-infrared (NIR) light for their practical application. Herein, a novel thermochromic Ni(II) organometallic of [(C2 H5 )2 NH2 ]2 NiCl4 for smart windows is rationally designed and synthesized via an inexpensive mechanochemistry method, which processes a low phase-transition temperature of 46.3 °C for the reversible color evolution from transparent to blue with a tunable visible transmittance from 90.5% to 72.1%. Furthermore, cesium tungsten bronze (CWO) and antimony tin oxide (ATO) with excellent NIR absorption in 750-1500 and 1500-2600 nm are introduced in the [(C2 H5 )2 NH2 ]2 NiCl4 -based smart windows, realizing a broadband sunlight modulation of a 27% visible light modulation and more than 90% of NIR shielding ability. Impressively, these smart windows demonstrate stable and reversible thermochromic cycles at room temperature. Compared with the conventional windows in the field tests, these smart windows can significantly reduce the indoor temperature by 16.1 °C, which is promising for next-generation energy-saving buildings.

Helicobacter pylori infection and small intestinal bacterial overgrowth: a systematic review and meta-analysis.

BACKGROUND: There is a link between Helicobacter pylori (HP) infection and small intestinal bacterial overgrowth (SIBO) with nonspecific digestive symptoms. Nonetheless, whether HP infection is associated with SIBO in adults remains unclear. Based on a meta-analysis, we evaluated this relationship. RESULTS: Observational studies relevant to our research were identified by searching PubMed, Embase, the Cochrane Library, and the Web of Science. We evaluated between-study heterogeneity using the Cochrane Q test and estimated the I2 statistic. Random-effects models were used when significant heterogeneity was observed; otherwise, fixed-effects models were used. Ten datasets from eight studies, including 874 patients, were involved in the meta-analysis. It was shown that HP infection was related to a higher odds of SIBO (odds ratio [OR]: 1.82, 95% confidence interval: 1.29 to 2.58, p < 0.001) with mild heterogeneity (p for Cochrane Q test = 0.11, I2 = 7%). Subgroup analyses showed that HP infection was related to SIBO in young patients (mean age < 48 years, OR: 2.68, 95% CI: 1.67 to 4.28, p < 0.001; I2 = 15%) but not in older patients (mean age ≥ 48 years, OR: 1.15, 95% CI: 0.69 to 1.92, p < 0.60; I2 = 1%; p for subgroup difference = 0.02). Subgroup analyses further indicated that the association was not significantly affected by the country of study, comorbidities, exposure to proton pump inhibitors, or methods of evaluating HP infection and SIBO. CONCLUSIONS: HP infection may be related to SIBO in adults, which supports the detection of SIBO in patients with digestive symptoms and HP infection.

Carbonyl-Containing Thermally Activated Delayed Fluorescence Emitters for Narrow-Band Electroluminescence.

Carbonyl-containing derivatives show enduring vitality in the field of thermally activated delayed fluorescence (TADF) materials; they can realize high device efficiency by using both singlet and triplet excitons for electroluminescence. Recently, a system based on fused ketone/amine exhibited huge potential for constructing multi-resonance TADF (MR-TADF) emitters, which exhibit higher narrow-band emission than conventional TADF emitters with twisted donor-acceptor (D-A) structure. Herein, we summarize current research progress in both traditional and MR-type ketone derivatives with TADF characteristics for introducing the molecular design strategy of maintaining high device efficiency while keeping narrow-band emission profile. We hope this review can inspire the emergence of more high-performance narrow-band materials.

Low-dose of magnesium sulfate solution was not inferior to standard regime of polyethylene glycol for bowel preparation in elderly patients: a randomized, controlled study.

BACKGROUND: Large polyethylene glycol (PEG) is a standard regimen for bowel preparation. However, elderly patients suffered from adverse events. This study was to compare the efficacy and safety of oral magnesium sulfate solution (MSS) vs standard PEG in elderly patients undergoing colonoscopy. METHODS: Elderly patients aged 60-90 years, from two endoscopic centers, were enrolled in China. Patients were randomized to take a low dose of MSS or a standard PEG regime in a split-dose regime. The primary endpoint was the proportion of patients with adequate bowel preparation, which was defined as the total Boston Bowel Preparation Scale (BBPS) ≥6 and each segmental BBPS was ≥2. Secondary outcomes included adenoma detection rate (ADR), safety, adverse events, cecal intubation rate, willingness to repeat BP, and so on. RESULTS: 1174 elderly patients were randomly allocated to the MSS group (n = 588) or the standard group (n = 586). Adequate BP was achieved in 94.0% of patients in the MSS group and 92.5% in the control (p = .287). ADR was also comparable between the two groups (43.0% and 39.9%, p = .282). Compared with the standard group, MSS group reported less abdominal discomfort (1.7% vs 6.0%), less nausea (13.6% vs 21.0%) and vomiting (1.2% vs 4.2%). The change in serum potassium levels after preparation in the standard group was significantly lower than that in the MSS group (-0.19 ± 0.08 vs -0.41 ± 0.11, p = .037). CONCLUSIONS: Low dose of MSS was not inferior to the standard PEG regime in terms of bowel preparation quality for elderly patients. Low-dose MSS offered fewer adverse events and better tolerability. It is a preferable choice for the elderly to undergo bowel preparation for colonoscopy. CLINICAL TRIAL REGISTRATION NUMBER: NCT04948567.

Optic nerve injury models under varying forces.

PURPOSE: To explore the pathological changes in optic nerve injury models under varying forces. METHODS: The rats were classified into 4 groups: sham operation (SH), 0.1, 0.3, and 0.5 N. Modeling was performed using the lateral optic nerve pulling method. Seven days after modeling, Brn3a immunofluorescence was used to detect retinal ganglion cell (RGC) number, terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) staining was used to detect RGC apoptosis, and flash visual evoked potential (FVEP) was used to detect the optic nerve function on days 1, 3, and 7 after modeling. In addition, LC3 II and P62 expression levels in retinal tissues were detected by western blotting to observe the changes in autophagy levels. RESULTS: RGC number decreased 7 d after modeling, and it showed a downward trend with increasing damaging force. The number of apoptotic RGCs in ganglion cell layer in the 0.3 and 0.5 N groups was increased and was higher than that in the 0.1 N group. The difference in FVEP of rats in each group was mainly reflected in the P2 peak latency. LC3 II and P62 expression levels in retinal tissue of 0.3 and 0.5 N groups were higher than those of the SH and 0.1 groups; however, the difference between the 0.1 N and SH groups was not statistically significant. CONCLUSION: Precisely controlling the force of the optic nerve clamping injury model is necessary because different forces acting on the optic nerve will lead to differences in the loss of optic neurons, the conduction function of the optic nerve, and autophagy level in retinal tissues.

Introducing Spiro-locks into the Nitrogen/Carbonyl System towards Efficient Narrowband Deep-blue Multi-resonance TADF Emitters.

The current availability of multi-resonance thermally activated delayed fluorescence (MR-TADF) materials with excellent color purity and high device efficiency in the deep-blue region is appealing. To address this issue in the emerged nitrogen/carbonyl MR-TADF system, we propose a spiro-lock strategy. By incorporating spiro functionalization into a concise molecular skeleton, a series of emitters (SFQ, SOQ, SSQ, and SSeQ) can enhance molecular rigidity, blue-shift the emission peak, narrow the emission band, increase the photoluminescence quantum yield by over 92 %, and suppress intermolecular interactions in the film state. The referent CZQ without spiro structure has a more planar skeleton, and its bluer emission in the solution state redshifts over 40 nm with serious spectrum broadening and a low PLQY in the film state. As a result, SSQ achieves an external quantum efficiency of 25.5 % with a peak at 456 nm and a small full width at half maximum of 31 nm in a simple unsensitized device, significantly outperforming CZQ. This work discloses the importance of spiro-junction in modulating deep-blue MR-TADF emitters.

Efficient Near-Infrared Electroluminescence from Lanthanide-Doped Perovskite Quantum Cutters.

Perovskite nanocrystals (PeNCs) deliver size- and composition-tunable luminescence of high efficiency and color purity in the visible range. However, attaining efficient electroluminescence (EL) in the near-infrared (NIR) region from PeNCs is challenging, limiting their potential applications. Here we demonstrate a highly efficient NIR light-emitting diode (LED) by doping ytterbium ions into a PeNCs host (Yb3+ : PeNCs), extending the EL wavelengths toward 1000 nm, which is achieved through a direct sensitization of Yb3+ ions by the PeNC host. Efficient quantum-cutting processes enable high photoluminescence quantum yields (PLQYs) of up to 126 % from the Yb3+ : PeNCs. Through halide-composition engineering and surface passivation to improve both PLQY and charge-transport balance, we demonstrate an efficient NIR LED with a peak external quantum efficiency of 7.7 % at a central wavelength of 990 nm, representing the most efficient perovskite-based LEDs with emission wavelengths beyond 850 nm.

Low-Dimensional Phase Regulation to Restrain Non-Radiative Recombination for Sky-Blue Perovskite LEDs with EQE Exceeding 15 .

Achieving efficient blue electroluminescence (EL) remains the fundamental challenge that impedes perovskite light-emitting diodes (PeLEDs) towards commercial applications. The bottleneck accounting for the inefficient blue PeLEDs is broadly attributed to the poor-emissive blue perovskite emitters based on either mixed halide engineering or reduced-dimensional strategy. Herein, we report the high-performing sky-blue PeLEDs (490 nm) with the maximum EQE exceeding 15 % by incorporating a molecular modifier, namely 4,4'-Difluorophenone, for significantly suppressing the non-radiative recombination and tuning of the low-dimensional phase distribution of quasi-2D blue perovskites, which represents a remarkable paradigm for developing the new generation of blue lighting sources.