Green Synthesis of Iron Oxides and Phosphates via Thermal Treatment of Iron Polyphenols Synthesized by a Camellia sinensis Extract.

Iron oxide nanoparticles (FeONPs) prepared with plant extracts have been emerging as green and sustainable materials. FeONPs are usually amorphous due to the chelation of the tea polyphenols (TPs) to the iron, and the real nature of the iron compounds is not completely understood. The main goal of this study was to investigate the behavior of the green FeONPs synthesized from an Fe3+ salt and Cammelia sinensis (black tea) extract upon thermal treatment, in order to remove TPs and enable the formation of crystalline materials suitable for a thorough characterization and with the potential for diverse applications. The as-prepared FeONPs were assigned as mixed-valence Fe(III) oxyhydroxides and Fe(II)/Fe(III) ions bound to TPs. A detailed description of the phase transformation upon heating revealed the formation of the rare nano ß-Fe2O3 phase at 400 °C, followed by a transformation to α-Fe2O3 as the temperature increased. Above 600 °C, the unprecedented formation of FePO4 and Fe3PO7 was observed, produced from the reaction of Fe2O3 and free phosphate ions present in the black tea leaves, Fe3PO7 being the major phase obtained at 900 °C. Finally, the catalytic potential of the FeONPs to treat the azo dye methyl orange through a heterogeneous Fenton-like system was investigated.

Hydrothermal synthesis of new wolframite type trimetallic materials and their use in oxidative dehydrogenation of propane.

With the aim of obtaining materials with properties for use as catalysts, two new trimetallic oxides containing Co or Ni and Mo and W were synthesized by a hydrothermal method, using milder conditions than those normally used for wolframite type solids. They were characterized by X-ray diffraction, Fourier transformed infrared spectroscopy, laser Raman spectroscopy, temperature-programmed reduction and atomic absorption spectroscopy, indicating that pure wolframite phases were formed. The X-ray diffraction studies confirmed the formation of the structure in the monoclinic system with cell parameters similar to nickel tungsten wolframite. The laser Raman and infrared spectra showed differences among the samples, mainly due to the incorporation of molybdenum atoms in the wolframite structure. Incorporation of molybdenum in the catalysts improved catalytic activity for propane oxidative dehydrogenation, and lower reaction temperatures were required in order to obtain similar propene yields as in bimetallic tungsten wolframites.

Unexpected redox behaviour of large surface alumina containing highly dispersed ceria nanoclusters.

Cerium-containing oxide materials have several very interesting applications due to their capacity to store and release oxygen under oxidizing and reducing conditions respectively. In the case of pure ceria this property is highly size dependent inasmuch as the phenomenon is limited to the surface and subsurface oxygen atoms. As a consequence, the design of nanocrystals of ceria has been attracting much attention. In this paper, the evaporation-induced self-assembly method was used to prepare a series of mixed oxide materials composed of nanoclusters of ceria very well dispersed over large surface mesoporous alumina. We observed a total and reversible reduction of Ce4+ into Ce3+ at 400 °C for the materials with a Ce loading between 20 and 35 wt%. A combination of analyses including in situ X-ray diffraction, temperature-programmed reduction, oxygen storage capacity, isotopic exchange, 27-Al and 17-O solid state NMR, and X-ray absorption spectroscopy at the Ce L3-edge was employed to investigate this unexpected redox behavior. The results reveal that the strong structural disorder observed in both CeO2 and Al2O3 nanoclusters favors the formation of non-crystallized CeAlO3 pseudo phase at the interface between the two oxides.

House dust mite fauna characterization in the city of Rio de Janeiro and its importance in allergy diagnosis / Caracterização da fauna dos ácaros de poeira na cidade do Rio de Janeiro e sua importância em diagnósticos de alergias

Introduction: The home environment is one of the most favorable spaces for the development of mites because of its low light, humidity, and temperature. Thus, it contributes to the growing cases of allergies among atopic individuals. Objective: To investigate the faunal profile of house dust mites in the city of Rio de Janeiro and the allergenic potential in this region. Methods: Thirty dust samples were collected from homes in the city of Rio de Janeiro, and the species found were classified according to their morphology, family, and genus by classification key. For the collection region, the total protein level was assessed by the Lowry method and electrophoresis under denaturing conditions (SDSPAGE). Results: There was a predominance of Pyroglyphidae mites, accounting for 84.9% of samples; Tyrophagus putrescentiae accounted for 8%, Blomia tropicalis for 6%, Cheyletus malaccensis for 1%, and Acarus siro for 0.1%. The allergen protein content of the samples was the following: group 1 ­ 25 kDa (Der 1, Der p 1, and Blo t 1), group 2 ­ 15 kDa (Der f 2, Der 2, Tyr p 2, and Blo t 2), and group 3 ­ 29-30 kDa (Der f 3 and Blo t 3), which indicates that people in this region are susceptible to sensitization to these mites. Conclusion: Knowledge of the mite fauna in the region under study allows the guidance of health care professionals to perform skin tests for specific mites and conduct treatment according to the pool of mite extracts containing antigens, making immunotherapy more effective.

Introdução: O ambiente domiciliar é um dos espaços favoráveis para o desenvolvimento de ácaros, tendo em vista a baixa luminosidade, umidade e temperatura, o que contribui para os crescentes casos de alergias em indivíduos atópicos. Objetivo: Investigar o perfil faunístico dos ácaros na cidade do Rio de Janeiro e o potencial alergêncio para essa região. Métodos: Foram coletadas 30 amostras de poeira em residências na cidade do Rio de Janeiro, e as espécies encontradas foram classificadas quanto à morfologia, família e o gênero por chave de classificação. Para as regiões das coletas, a carga total de proteínas contendo os alérgenos foi determinada pelo método de Lowry e eletroforese em condições desnaturantes (SDS-PAGE). Resultados: Os resultados mostram a predominância de 84,9% de ácaros da família Pyroglyphidae; para os demais ácaros o percentual corresponde a 8% Tyrophagus putrescentiae, 6% Blomia tropicalis, 1% Cheyletus malaccensis, e 0,1% de Acarus siro. O conteúdo proteico alergêncio constituinte das amostras foram, grupo 1: 25 kDa (Der 1, Der p 1 e Blo t 1); grupo 2: 15 kDa (Der f 2, Der 2, Tyr p 2 e Blo t 2); e para o grupo 3: 29-30 kDa (Der f 3 e Blo t 3), o que indica uma região passível à sensibilização de indivíduos por estes ácaros. Conclusão: O conhecimento da acarofauna nas regiões em estudo permite orientar a comunidade médica quanto à realização de testes cutâneos, além da terapêutica a partir do pool de extratos de ácaros contendo os antígenos, a fim de tornar a imunoterapia mais eficaz.

Synthesis and characterization of terephthalate-intercalated NiAl layered double hydroxides with high Al content.

Terephthalate-intercalated nickel-aluminum layered double hydroxides (LDHs) were prepared by a co-precipitation method, with nominal x values in the general formula Ni((1-x))Al(x)(OH)(2)(C(8)H(4)O(4))(x/2) in the range 0.3-0.8. The materials were characterized by X-ray diffraction, X-ray fluorescence spectroscopy, CHN analysis, thermogravimetric analysis, FTIR spectroscopy, EXAFS at the Ni edge and (27)Al NMR spectroscopy. A combination of XRD, XRF and CHN analysis indicated that crystalline LDHs with true x values up to 0.5 were obtained, along with increasing segregation of an aluminum hydroxide phase with increasing aluminum content. The EXAFS analysis indicated an upper limit of ca. 0.6 for the atomic fraction of aluminum at the second nickel coordination sphere. The (27)Al NMR analysis suggested that a phase containing octahedrally co-ordinated Al(3+) is segregated for nominal x values from 0.6 upwards.