Low half-wave voltage polymeric electro-optic modulator using CLD-1/PMMA for electrocardiogram (ECG) signal acquisition.

Electro-optic (EO) modulators are typically made of inorganic materials such as lithium niobate; the replacement of these modulators with organic EO materials is a promising alternative due to their lower half-wave voltage (Vπ), ease of handling, and relatively low cost. We propose the design and fabrication of a push-pull polymer electro-optic modulator with voltage-length parameters (VπL) of 1.28 V·cm. The device uses a Mach-Zehnder structure and is made of a second-order nonlinear optical host-guest polymer composed of a CLD-1 chromophore and PMMA polymer. The experimental results show that the loss is 1.7 dB, Vπ drops to 1.6 V, and the modulation depth is 0.637 dB at 1550 nm. The results of a preliminary study show that the device is capable of efficiently detecting electrocardiogram (ECG) signals with performance on par with that of commercial ECG devices.

Microring structure for flexible polymer waveguide-based optical pressure sensing.

Flexible pressure sensors provide a promising platform for artificial smart skins, and photonic devices provide a new technique to fabricate pressure sensors. Here, we present a flexible waveguide-based optical pressure sensor based on a microring structure. The waveguide-based optical pressure sensor is based on a five-cascade microring array structure with a size of 1500 µm × 500 µm and uses the change in output power to linearly characterize the change in pressure acting on the device. The results show that the device has a sensing range of 0-60 kPa with a sensitivity of 23.14 µW/kPa, as well as the ability to detect pulse signals, swallowing, hand gestures, etc. The waveguide-based pressure sensors offer the advantages of good output linearity, high integration density and easy-to-build arrays.

Fabrication and characterization of polymer optical waveguide Bragg grating for pulse signal sensing.

Polymer materials have the advantages of a low Young's modulus and low-cost preparation process. In this paper, a polymer-based optical waveguide pressure sensor based on a Bragg structure is proposed. The change in the Bragg wavelength in the output spectrum of the waveguide Bragg grating (WBG) is used to linearly characterize the change in pressure acting on the device. The polymer-based WBG was developed through a polymer film preparation process, and the experimental results show that the output signal of the device has a sensitivity of 1.275 nm/kPa with a measurement range of 0-12 kPa and an accuracy of 1 kPa. The experimental results indicate that the device already perfectly responds to a pulse signal. It has significant potential application value in medical diagnostics and health testing, such as blood pressure monitoring, sleep quality monitoring, and tactile sensing.

Silicon-photonics-based waveguide Bragg grating sensor for blood glucose monitoring.

We demonstrated the design of two different structures, a two-sided structure and a top-surface structure, of glucose waveguide Bragg grating (WBG) sensors in a single-mode silicon-on-insulator (SOI) chip. A two-sided WBG structure was fabricated, and chip preparation was realized by lithography and other processes. A photonic platform for testing the two-sided WBG using glucose was built and completed. When the blood glucose concentration changed by 1 mg/mL, the two-sided WBG had a wavelength offset of 78 pm. The experimental results show that the two structures can achieve the sensing of different blood glucose concentrations. The two-sided WBG had better sensing performance and thus has a wide range of application prospects.

Immuno-capture PCR for detection of Aeromonas hydrophila.

In this report, we describe the use of universal primer PCR (UPPCR) for the detection of 16S ribosomal RNA (rRNA) genes from Aeromonas hydrophila captured by anti-A. hydrophila antibody coupled to a microplate. The approach combining immuno-capture with UPPCR provides a quick, sensitive, and reproducible way for the detection of bacterial cells.

Comparative proteomic analysis of rd29A:RdreB1BI transgenic and non-transgenic strawberries exposed to low temperature.

Low-temperature stress is one of the major abiotic stresses in plants worldwide, and the dehydration responsive element binding protein (DREB) transcription factor induces expression of genes involved in environmental stress tolerance in plants. A proteomic approach based on two-dimensional gel electrophoresis (2-DE) and subsequent mass spectrometric identification was used to study the changes in the leaf proteome profiles of rd29A:RdreB1BI transgenic and non-transgenic strawberries exposed to low-temperature conditions. By comparing the proteomic profiles, we located 21 protein spots that were reproducibly up- or down-regulated by more than twofold between transgenic and non-transgenic strawberries. Eight identified proteins function in energy and metabolism, four in biosynthetic processes, four were stress and defense related, three spots were identified as cold-stress related expressed sequence tags (ESTs), and two were unknown proteins. The change patterns of low-temperature tolerance proteins, including photosynthetic proteins (RuBisCO large subunit and RuBisCO activase), cytoplasmic Cu/Zn-superoxide dismutase (Cu/Zn-SOD), late embryogenesis abundant protein 14-A (Lea14-A), eukaryotic translation initiation factor 5A (eIF5A), and cold-stress related ESTs, were differentially regulated between non-transgenic and rd29A:RdreB1BI transgenic strawberries. They are likely important gene products in the regulatory network of the RdreB1BI gene. Consequently, this study provides the first characterization of the transgenic strawberry proteome and the predicted target proteins of the RdreB1BI gene by using proteomic approaches.