Amidation-Reaction Strategy Constructs Versatile Mixed Matrix Composite Membranes towards Efficient Volatile Organic Compounds Adsorption and CO2 Separation.

Mixed matrix composite membranes (MMCMs) have shown advantages in reducing VOCs and CO2 emissions. Suitable composite layer, substrate, and good compatibility between the filler and the matrix in the composite layer are critical issues in designing MMCMs. This work develops a high-performance UiO-66-NA@PDMS/MCE for VOCs adsorption and CO2 permea-selectivity, based on a simple and facile fabrication of composite layer using amidation-reaction approach on the substrate. The composite layer shows a continuous morphological appearance without interface voids. This outstanding compatibility interaction between UiO-66-NH2 and PDMS is confirmed by molecular simulations. The Si─O functional group and UiO-66-NH2 in the layer leads to improved VOCs adsorption via active sites, skeleton interaction, electrostatic interaction, and van der Waals force. The layer and ─CONH─ also facilitate CO2 transport. The MMCMs show strong four VOCs adsorption and high CO2 permeance of 276.5 GPU with a selectivity of 36.2. The existence of VOCs in UiO-66-NA@PDMS/MCE increases the polarity and fine-tunes the pore size of UiO-66-NH2 , improving the affinity towards CO2 and thus promoting the permea-selectivity for CO2 , which is further verified by GCMC and EMD methods. This work is expected to offer a facile composite layer manufacturing method for MMCMs with high VOC adsorption and CO2 permea-selectivity.

A Sunlight-Driven Self-Cleaning CuCo-MOF Composite Membrane for Highly Efficient Emulsion Separation and Water Purification.

The fouling phenomenon of membranes has hindered the rapid development of separation technology in wastewater treatment. The integration of materials into membranes with both excellent separation performance and self-cleaning properties still pose challenges. Here, a self-assembled composite membrane with solar-driven self-cleaning performance is reported for the treatment of complex oil-water emulsions. The mechanical robustness of the composite membrane is enhanced by the electrostatic attraction between chitosan and metal-organic frameworks (MOF) CuCo-HHTP as well as the crosslinking effect of glutaraldehyde. Molecular dynamics (MD) simulations also revealed the hydrogen bonding interaction between chitosan and CuCo-HHTP. The composite membrane of CuCo-HHTP-5@CS/MPVDF exhibits a high flux ranging from 700.6 to 2350.6 L∙m-2∙h-1∙bar-1 and excellent separation efficiency (>99.0%) for various oil-water emulsions, including crude oil, kerosene, and other light oils. The addition of CuCo-HHTP shows remarkable photothermal effects, thus demonstrating excellent solar-driven self-cleaning capability and antibacterial performance (with an efficiency of ≈100%). Furthermore, CuCo-HHTP-5@CS/MPVDF can activate peroxomonosulfate (PMS) under sunlight, quickly removing oil-fouling and dyes. Density functional theory (DFT) calculations indicate that the bimetallic sites of Cu and Co in CuCo-HHTP effectively promoted the activation of PMS. This study provides distinctive insights into the multifaceted applications of MOFs-derived photothermal anti-fouling composite membranes.

Serum PM20D1 levels in patients with idiopathic pulmonary arterial hypertension and its clinical significance.

OBJECTIVE: This study aimed to investigate the serum levels of Peptidase M20 domain containing 1 (PM20D1) in idiopathic pulmonary arterial hypertension (IPAH) patients and examine its association with lipid metabolism, echocardiography, and hemodynamic parameters. METHODS: This prospective observational research enrolled 103 IPAH patients from January 2018 to January 2022. Enzyme-linked immunosorbent assay (ELISA) was used to measure the serum PM20D1 levels in all patients before treatment within 24 h of admission. Demographic data, echocardiography, hemodynamic parameters and serum biomarkers were also collected. RESULTS: The IPAH patients in the deceased group had significantly elevated age, right atrial (RA), mean pulmonary arterial pressure (mPAP), mean right atrial pressure (mRAP), pulmonary capillary wedge pressure (PCWP), pulmonary vascular resistance (PVR) and significantly decreased 6 min walking distance (6MWD) and tricuspid annulus peak systolic velocity (TASPV). IPAH patients showed significant decreases in serum PM20D1, low-density lipoprotein cholesterol (LDL-C), and albumin (ALB). Additionally, PM20D1 was negatively correlated with RA, NT-proBNP and positively correlated with PVR, ALB, 6MWD, and TAPSV. Moreover, PM20D1 has the potential as a biomarker for predicting IPAH patients' prognosis. Finally, logistic regression analysis indicated that PM20D1, ALB, NT-proBNP, PVR, TASPV, RA and 6MWD were identified as risk factors for mortality in IPAH patients. CONCLUSION: Our findings indicated that the serum levels of PM20D1 were significantly decreased in IPAH patients with poor prognosis. Moreover, PM20D1 was identified as a risk factor associated with mortality in IPAH patients.

Infiltrating myeloid cell diversity determines oncological characteristics and clinical outcomes in breast cancer.

BACKGROUND: Breast cancer presents as one of the top health threats to women around the world. Myeloid cells are the most abundant cells and the major immune coordinator in breast cancer tumor microenvironment (TME), target therapies that harness the anti-tumor potential of myeloid cells are currently being evaluated in clinical trials. However, the landscape and dynamic transition of myeloid cells in breast cancer TME are still largely unknown. METHODS: Myeloid cells were characterized in the single-cell data and extracted with a deconvolution algorithm to be assessed in bulk-sequencing data. We used the Shannon index to describe the diversity of infiltrating myeloid cells. A 5-gene surrogate scoring system was then constructed and evaluated to infer the myeloid cell diversity in a clinically feasible manner. RESULTS: We dissected the breast cancer infiltrating myeloid cells into 15 subgroups including macrophages, dendritic cells (DCs), and monocytes. Mac_CCL4 had the highest angiogenic activity, Mac_APOE and Mac_CXCL10 were highly active in cytokine secretion, and the DCs had upregulated antigen presentation pathways. The infiltrating myeloid diversity was calculated in the deconvoluted bulk-sequencing data, and we found that higher myeloid diversity was robustly associated with more favorable clinical outcomes, higher neoadjuvant therapy responses, and a higher rate of somatic mutations. We then used machine learning methods to perform feature selection and reduction, which generated a clinical-friendly scoring system consisting of 5 genes (C3, CD27, GFPT2, GMFG, and HLA-DPB1) that could be used to predict clinical outcomes in breast cancer patients. CONCLUSIONS: Our study explored the heterogeneity and plasticity of breast cancer infiltrating myeloid cells. By using a novel combination of bioinformatic approaches, we proposed the myeloid diversity index as a new prognostic metric and constructed a clinically practical scoring system to guide future patient evaluation and risk stratification.

Evaluation of Male Breast Cancer and the Application of Sentinel Lymph Node Biopsy: A Multicenter Retrospective Study.

Sentinel lymph node biopsy (SLNB) is currently used as a routine treatment for patients with breast cancer. However, it may not be applicable for patients with male breast cancer (MBC), because they have notably different clinicopathological features from those occurring in females. There is a lack of evidence of SLNB application and safe exemption from axillary lymph node dissection (ALND) in patients with MBC. This study aimed to evaluate the application of SLNB to provide information for the standardized treatment of patients with MBC. The MBC patient records from 4 institutions ranging from January 2001 to November 2020 were retrospectively reviewed. There were 220 patients with MBC with a median age of 60 (range 24-88) years and an average tumor size of 2.3 cm (range 0.5 cm-6.5 cm). Sixty-six percent of patients underwent SLNB, and 39% of them showed positive results. A total of 157 patients underwent ALND, while only half of them had positive nodes, causing unnecessary complications. For patients in the clinical early stage, we found that the SLNB showed a noninferiority to the ALND treatment in DFS (P = .18) and OS (P = .055). In conclusion, there are certain obstacles to the broad application of SLNB due to the lower proportion of patients with clinically negative lymph nodes. However, it is undeniable that SLNB can safely and effectively exempt patients with MBC at early stage with clinically negative nodes from ALND to reduce subsequent complications. It is still an ideal criterion for the axillary staging of patients with MBC.

Active noise reduction for a differential Helmholtz photoacoustic sensor excited by an intensity-modulated light source.

A highly sensitive differential Helmholtz photoacoustic sensor with active noise reduction was reported. Coupled to one cavity of the photoacoustic cell, an intensity-modulated excitation light would reflect multiple times to produce photoacoustic signal, and meanwhile cause the solid-state photoacoustic effect forming differential mode noise with the frequency same as the photoacoustic signal, which could not be suppressed by conventional differential technology. Wavelength modulation technology is a splendid method to restrain this effect, which is not suitable for light sources with not adjustable wavelength. To suppress this kind of noise, an intensity-modulated compensation light was coupled to another cavity, whose central wavelength was at the non-absorption line of the measured gas. The compensation light was of the same frequency, phase, and power as the excitation light, by which the solid-state photoacoustic effects were produced to form destructive interference called active noise reduction. The experiment results showed that the active noise reduction significantly improved the signal-to-noise ratio and signal-to-background ratio. Compared with the differential, the differential with active noise reduction improved signal-to- noise ratio by about 1.2 times and signal-to-background ratio by about 9.4 times. When low-power near-infrared lasers were employed as the two light sources, the minimum detection limits for acetylene and methane reached 21 and 200 ppb, respectively.

Tyrosine-Conjugation Method for Evaluating BACE1 Activity Based on Silver Nanoparticles/Metal-Organic Framework Composites as Electrochemical Tags.

Beta-site secretase (BACE1) catalyzes the cleavage of amyloid precursor protein (APP), which process ultimately lead to plaque deposition in the brain of Alzheimer's disease (AD). Thus, accurate monitor of BACE1 activity is essential to screen inhibitors for AD treatment. This study develops a sensitive electrochemical assay for probing BACE1 activity based on silver nanoparticles (AgNPs) and tyrosine conjugation as tags and a marking method, respectively. An APP segment is firstly immobilized on aminated microplate reactor. Cytosine (C) rich sequence-templated AgNPs/Zr-based metal-organic framework (MOF) composite is modified by phenol groups, and then the prepared tag (ph-AgNPs@MOF) is captured in microplate surface by the conjugation reaction of phenolic groups between tyrosine and tag. After cleavage by BACE1, the solution containing ph-AgNPs@MOF tags is transferred to the screen-printed graphene electrode (SPGE) surface for voltammetric detection of AgNP signal. This sensitive detection for BACE1 provided an excellent linear relationship between 1 to 200 pM with a detection limit of 0.8 pM. Furthermore, this electrochemical assay is successfully applied for screening of BACE1 inhibitors. This strategy is also verified to be used for evaluation of BACE1 in serum samples.

Adsorption and Dispersion Effect of Sodium Lignosulfonate on Fine SiC Particles in Aqueous Media.

This study presented a novel modification method for fine SiC powder by using sodium lignosulfonate as a dispersant. The adsorption behavior of sodium lignosulfonate on the SiC/water interface and its effect on the performance of a fine SiC slurry were systematically investigated. The adsorption results showed that sodium lignosulfonate formed monolayer adsorption on the surface of fine SiC and that the saturated adsorption capacity was 1.3263 mg/g. The adsorption reached equilibrium within 3 h and was mainly controlled by active sites on the SiC surface. The dispersion, stability, and zeta potential of modified SiC powder were improved after sodium lignosulfonate adsorption. The zeta potential of modified SiC reached a minimum value of -44.8 mV at pH 12. Modified SiC suspensions had great stability in a wider pH range of 6-12. Modified SiC slurry with 54 vol % solid loading had a low viscosity of 173 mPa·s at pH 10. Subsequently, coarse SiC powder was added for slip casting. A mixed slurry with high solid loading (69 vol %) and low viscosity (583 mPa·s) was prepared using modified SiC and coarse SiC powders at a mass ratio of 2:3. Finally, recrystallized SiC green body with high density (2.6492 g/cm3) was obtained.

Design of a high-sensitivity differential Helmholtz photoacoustic cell and its application in methane detection.

A high-sensitivity differential Helmholtz photoacoustic cell based on multiple reflection was reported, and its performance parameters and gas replacement time were optimized by finite element simulation. To realize the long absorption path of the measured gas, the collimated excitation light was reflected multiple times on the gold-plated wall of the absorption cavity, and the wavelength modulation technology was used to reduce the multiple reflection noise. Additionally, the differential could suppress external co-phase noise and double the photoacoustic signal. When a laser with a central wavelength of 1653 nm was employed as the excitation light source, the minimum detection limit of 177 ppb (signal-to-noise ratio, SNR = 1) for methane was achieved within a detection time of 1 s, and the corresponding normalized noise equivalent absorption coefficient was 4.1×10-10 cm-1WHZ-1/2.

The prognostic value of IPI in patients with primary breast lymphoma, a multicenter retrospective study.

BACKGROUND: Due to the rarity of PBL and the lack of large-scale studies, the prognostic value of IPI in PBL was controversial. Especially in the rituximab era, the ability of IPI to stratify prognosis in patients receiving immunochemotherapy was severely reduced. Then revised IPI (R-IPI) and National Comprehensive Cancer Network IPI (NCCN-IPI) were introduced. The present study aimed to evaluate the prognostic value of IPI and the other IPIs in patients with PBL in a Chinese population. METHODS: We performed a multicenter retrospective study of 71 patients with PBL from 3 institutions in China. The Kaplan-Meier method and log-rank tests were used for the survival analysis. Cox regression analysis was performed to evaluate the prognostic factors. Subgroup analysis was performed to assess the prognostic significance of IPI scores, R-IPI scores, and NCCN-IPI scores. RESULTS: The median follow-up was 4.7 years (0.7-21.8 years). The 5-year progression-free survival (PFS) and overall survival (OS) rates were 90.2% and 96.3%. In the multivariate analysis, only IPI scores and radiotherapy were significantly associated with OS and PFS (P < 0.05). Applying the R-IPI in our patient cohort indicates a significant difference in PFS between the two groups of R-IPI (P = 0.034) but not for OS (P = 0.072). And the NCCN-IPI was prognostic for OS (P = 0.025) but not for PFS (P = 0.066). Subgroup analyses of IPI showed that survival analysis of IPI scores for the PFS and OS of patients using rituximab were not significantly different (P > 0.05). CONCLUSIONS: Our study confirms the prognostic value of IPI in patients with PBL, but the predictive value of IPI proved to be relatively low with the addition of the rituximab. The R-IPI and NCCN-IPI can accurately assess the high and low-risk groups of PBL patients but were insufficient to evaluate the intermediate risk group.

DNA-encoded CH functionality via photoredox-mediated hydrogen atom transformation catalysis.

We described a mode of catalytic activation that accomplished the α-alkylation of N-Boc saturated heterocycles with DNA-linked acrylamide via photoredox-mediated hydrogen atom transfer (HAT) catalysis. This C(sp3)-C(sp3) bond formation reaction tolerated five-, six- and seven-membered cyclic substrates, substantially streamline synthetic efforts to functionalize the α-position of heterocycles with native CH functional handle. This photoredox catalyzed CH functionalization proceeded in mild DNA-compatible condition, and suited for the construction of DNA-encoded libraries.

Highly Sensitive Sphere-Tube Coupled Photoacoustic Cell Suitable for Detection of a Variety of Trace Gases: NO2 as an Example.

The concentration of trace gases in the atmospheric environment is extremely low, but it has a great impact on the living environment of organisms. Photoacoustic spectroscopy has attracted extensive attention in the field of trace gas detection because of its high sensitivity, good selectivity, and fast response. As the core of a photoacoustic detection setup, the photoacoustic cell has a significant impact on detection performance. To improve detection sensitivity, a sphere-tube coupled photoacoustic cell (STPAC) was developed, which was mainly composed of a diffuse-reflective sphere and an acoustic resonance tube. Modulated light was reflected multiple times in the sphere to increase optical path, and photoacoustic (PA) signals were further amplified by the tube. Based on STPAC, a PA gas detection setup was built with a laser diode (LD) at 450 nm as the light source. The experimental results showed that the minimum detection limit (noise equivalent concentration, NEC) of NO2 was ~0.7 parts per billion (ppb). Compared with the T-type PA cell (TPAC) in which the modulated light passed through the sphere, the signal-to-noise ratio of STPAC was increased by an order of magnitude at the same concentration of the NO2 sample.

HOTAIR promotes osteosarcoma development by sponging miR-217 and targeting ZEB1.

Long noncoding RNAs (lncRNAs) have drawn increasing attention because of the role which they play in various diseases, including osteosarcoma. So far, the function and mechanism of HOTAIR in osteosarcoma are unclear. In our study, we observed that HOTAIR was elevated accompanied with a decrease of miR-217 and an increase of ZEB1 in human osteosarcoma cells including U2OS, MG63, Saos-2, and SW1353 compared with human osteoblast cell line hFOB. In addition, the subsequent functional assay exhibited that silencing HOTAIR could significantly repress osteosarcoma cell growth, migration, invasion, and induce cell apoptosis capacity, which indicated that HOTAIR exerted an oncogenic role in osteosarcoma. Moreover, it was revealed by using bioinformatics analysis that HOTAIR can be targeted by microRNA-217 (miR-217). miR-217 has been recognized as a crucial tumor suppressive gene in cancers. We verified that mimics of miR-217 were able to suppress the osteosarcoma development. Furthermore, real-time quantitative PCR showed that HOTAIR siRNA increased miR-217 expression. Besides these, ZEB1 was identified as a downstream gene of miR-217 and we found that HOTAIR can mediate osteosarcoma progress by upregulating ZEB1 expression via acting as a competitive endogenous RNA (ceRNA) via miR-217. Taken these together, our findings in this study indicated that HOTAIR/miR-217/ZEB1 axis, as a novel research point can provide new insights into molecular mechanism of osteosarcoma development.

A Green-emitting Fluorescent Probe Based on a Benzothiazole Derivative for Imaging Biothiols in Living Cells.

A new green-emitting fluorescent probe 1 was developed for biothiol detection. The sensing mechanism was considered to be biothiol-induced cleavage of the 2,4-dinitrobenzene- sulfonate group in probe 1 and resulting inhibition of the probe's photoinduced electron transfer (PET) process. Probe 1 exhibited favorable properties such as excellent selectivity, highly sensitive (0.12 µM), large Stokes shift (117 nm) and a remarkable turn-on fluorescence signal (148-fold). Furthermore, confocal fluorescence imaging indicated that probe 1 was membrane-permeable and suitable for visualization of biothiols in living A549 cells.

Surface Modification of SiC Powder with Sodium Humate: Adsorption Kinetics, Equilibrium, and Mechanism.

Highly dispersible SiC powder was prepared using sodium humate as a modifier. The results showed that the ζ-potential absolute value of the modified SiC powder increased from 13.1 to 38.7 mV when the adsorption capacity of sodium humate on the SiC surface was 2.368 mg/g. The slurry with a maximum solid content of 65 vol % was obtained using the modified SiC powder, and the minimum viscosity value was 0.322 Pa s at a solid content of 50 vol %. The adsorption kinetics equation of sodium humate on the SiC surface is t/ q t = 0.6253 t + 11.0472, which is in accordance with the pseudo-second-order kinetics model. In addition, the isotherm equation, ln qe = 0.461 ln Ce - 0.334, agrees with the Freundlich model. The adsorption energy of sodium humate on the SiC surface was 0.8280 kJ/mol, indicating that the adsorption type was physical adsorption.

Inhibiting Firefly Bioluminescence by Chalcones.

Chalcone refers to an aromatic ketone and an enone that constitutes the central core for various important biological compounds in drug discovery. Moreover, the firefly luciferase (Fluc) as the bioluminescent reporter has been widely used in life science research and high-throughput screening (HTS). However, Fluc might suffer from direct inhibition by HTS compounds resulting in the occurrence of "false positives." In the current research, we discovered a series of chalcone compounds as Fluc inhibitors with favorable potency both in vitro and in vivo. Moreover, our compound 3i showed remarkable systemic inhibition in transgenic mice. Both enzymatic kinetics study and cocrystal structure demonstrated that compound 3i is competitive for substrate aminoluciferin, while noncompetitive for ATP. Besides, compound 3i exhibited excellent selectivity as a promising quenching agent in a simulated dual-luciferase reporter assay. We believed that our research would contribute to improving scientists' awareness of the Fluc inhibitors, pay attention to the bias results, and even expand the utilization of bioluminescence in life science research.

Lanthanide MOFs based portable fluorescence sensing platform: Quantitative and visual detection of ciprofloxacin and Al3.

In the current context of water environmental monitoring and pollution control, there's a crucial need for rapid and simple methods to detect multi-pollutant. We herein report an easy one-step hydrothermal synthesis method to produce Eu-based metal-organic frameworks (Eu MOFs), which was used as a fluorescent probe to detect the aquatic environmental pollutants of ciprofloxacin (CIP) and aluminum ions (Al3+). This fluorescent sensor enabled the cascade detection of CIP and Al3+ through fluorescence enhancement and ratio fluorescence response, respectively. The introduction of CIP significantly turned on the characteristic fluorescence of Eu MOFs at 595 nm and 616 nm through the "antenna effect". Based on this, the sensor enables quantitative detection of CIP within a linear range of 0-120 µM with a LOD as low as 50.421 nM. In the presence of Al3+, the fluorescence emission of Eu MOFs-CIP was sharply turned off due to strong Al3+ coordination with CIP, while the blue fluorescence emission of CIP was remarkably enhanced. And thus allowing ratio fluorescence quantitative detection of Al3+ (LOD = 2.681 µM). The introduction of CIP and Al3+ in cascade resulted in distinct fluorescence color changes from colorless to red and eventually to blue, exhibiting pronounced fluorescence characteristics. This observable phenomenon enables the visual detection of CIP and Al3+ in both aqueous phase and paper test strips. By combining the analysis of fluorescence chromaticity with the use of a smartphone, the fluorescence color of test papers allows for simple quantitative determination, which provides a convenient and accessible approach for quantifying CIP and Al3+ in water environments.

Effect of Glycine on the Wet Carbonation of Steel Slag Used as a Cementitious Material.

The wet carbonation process of steel slag (SS) is envisaged to be an effective way to sequestrate CO2 and improve the properties of SS as a supplementary cementitious material. However, the carbonation process still struggles with having a low carbonation efficiency. This paper studied the effect of glycine on the accelerated carbonation of SS. The phase composition change of carbonated SS was analyzed via XRD, FT-IR, and TG-DTG. The carbonation process of SS is facilitated by the assistance of glycine, with which the carbonation degree is increased. After 60 min of carbonation, SS with glycine obtained a CO2 sequestration rate of 9.42%. Meanwhile, the carbonation reaction could decrease the content of free calcium oxide in SS. This significantly improves the soundness of SS-cement cementitious material, and the compressive strength of cementitious materials that contain carbonated SS with glycine is improved. Additionally, the cycling performance of glycine in the successive wet carbonation process of SS was investigated. Multicycle experiments via solvent recovery demonstrated that although the promotion effect of glycine was reduced after each cycle, compared with the SS-water system, the carbonation process could still be facilitated, demonstrating that successive wet carbonation via solvent recovery has considerable potential. Herein, we provide a new idea to facilitate the wet carbonation process of SS and improve the properties of SS-cement cementitious material.

Influence of Silane Coupling Agent and Anionic Dispersant on the Dispersion Effect of Silicon Carbide Particles.

Silicon carbide (SiC), as a widely used material, has great properties. To improve the flowability of ultrafine silicon carbide slurry, this study used sodium humate, tetramethylammonium hydroxide (TMAH), and N-(ß-monoaminoethyl)-γ-aminopropyltrimethyl(ethoxysilane) (KH792) to modify the ultrafine silicon carbide powder produced by Qingzhou Micro Powder Company. The effects of different modifiers on improving the flowability of ultrafine silicon carbide slurry were investigated by means of viscosity tests, sedimentation experiments, and SEM observations. Their modification mechanisms were investigated by means of zeta potential tests, XPS tests, and so on. In this paper, the initial modification of SiC was carried out with KH792, followed by the secondary modification with anionic and cationic modifiers (tetramethylammonium hydroxide and sodium humate), and the optimal modification conditions were investigated by means of a viscosity test, which showed that the lowest viscosity of the modified SiC reached 0.076 Pa·s and that the absolute maximum value of the zeta potential increased from 47.5 at the time of no modification to 63.7 (maximum values) at the time of modification. This means it has an improved surface charge, which improves dispersion. The adsorption results of the modifier on the silicon carbide surface were also demonstrated by the XPS test results.