RESUMO
Composite optical measurement systems are widely used in the field of precision measurement due to their combination of inspection with high accuracy, speed, wide range, real-time, and other advantages. Whereas errors are prevalent in measurements, in order to improve detection accuracy, the systems must be compensated for geometric errors in three-dimensional space. Aiming at the complex situation of multi-probes and multi-zooms in the composite optical measurement system, the current error modelling methods are difficult to be directly applied, so this paper establishes a unified three-dimensional volumetric error model based on the theory of multi-body system and combined with the principle of geometric optics, performs the error verification through the direct measurement method, and finally realises the compensation of geometric error in the continuous space of the whole measurement range. Eventually, the accuracy of the proposed error model and the effectiveness of the error compensation method were verified by a laser interferometer and standard objects to be measured, and the integrated geometric error of the system was decreased by 76.55%, which effectively improved the accuracy of the system. The error modelling and compensation method proposed in this paper provides a new idea for the error compensation of the zoom measurement system, and at the same time, it is universal for the measurement systems of different structures and motion forms, which can be widely used in the field of precision measurement.
RESUMO
We proposed a calibration method for high-precision zoom lenses of optical measurement machines based on Fully Connected Neural Network (FNN), using a 5-layer neural network instead of a camera calibration model, to achieve continuous calibration of zoom lenses at any zoom setting by calibrating typical zooms. From the experimental verification, the average calibration error of this method is 9.83×10-4mm and the average measurement error at any zoom setting is 0.01317mm. The overall calibration precision is better than that of Zhang's calibration method and can meet the application requirements of a high-precision optical measurement machine. The method proposed in this paper provided a new solution and a new idea for the calibration of zoom lenses, which can be widely used in the fields of precision parts inspection and machine-vision measurement.
Assuntos
Lentes , CalibragemRESUMO
The manipulation of microscale bioentities is desired in many biological and biomedical applications. However, the potential unobservable damage to bioparticles due to rigid contact has always been a source of concern. Herein, a soft-contact acoustic microgripper to handle microparticles to improve the interaction safety is introduced. The system takes advantage of the acoustic-enhanced adhesion of flexible gas-liquid interfaces to capture-release, transport, and rotate the target, such as microbeads (20-65 µm) and zebrafish embryos (from 950 µm to 1.4 mm). The gas-liquid interface generated at the tip of a microcapillary can be precisely controlled by a pneumatic pressure source. The gas-liquid interface oscillation excited by acoustic energy imposes coupled radiation force and drag force on the microparticles, enabling multidimensional movements. Experiments with the microbeads are conducted to evaluate the claimed function and quantify the key parameters that influence the manipulation result. Additionally, 250 zebrafish embryos are captured, transported, and rotated. The hatching rate of the 250 manipulated embryos is approximately 98% similar to that of the nonmanipulated group, which proves the noninvasiveness of the method. The derived theories and experimental data indicate that the developed soft-contact microgripper is functional and beneficial for biological and medical applications.
Assuntos
Acústica , Peixe-Zebra , Animais , MicroesferasRESUMO
To explore and utilize the advantages of droplet-based microfluidics, hydrodynamics, and mixing process within droplets traveling though the T junction channel and convergent-divergent sinusoidal microchannels are studied by numerical simulations and experiments, respectively. In the T junction channel, the mixing efficiency is significantly influenced by the twirling effect, which controls the initial distributions of the mixture during the droplet formation stage. Therefore, the internal recirculating flow can create a convection mechanism, thus improving mixing. The twirling effect is noticeably influenced by the velocity of the continuous phase; in the sinusoidal channel, the Dean vortices and droplet deformation are induced by centrifugal force and alternative velocity gradient, thus enhancing the mixing efficiency. The best mixing occurred when the droplet size is comparable with the channel width. Finally, we propose a unique optimized structure, which includes a T junction inlet joined to a sinusoidal channel. In this structure, the mixing of fluids in the droplets follows two routes: One is the twirling effect and symmetric recirculation flow in the straight channel. The other is the asymmetric recirculation and droplet deformation in the winding and variable cross-section. Among the three structures, the optimized structure has the best mixing efficiency at the shortest mixing time (0.25 ms). The combination of the twirling effect, variable cross-section effect, and Dean vortices greatly intensifies the chaotic flow. This study provides the insight of the mixing process and may benefit the design and operations of droplet-based microfluidics.
Assuntos
Técnicas Analíticas Microfluídicas/métodos , Dimetilpolisiloxanos/química , Desenho de Equipamento/instrumentação , Hidrodinâmica , Dispositivos Lab-On-A-Chip , Técnicas Analíticas Microfluídicas/instrumentação , Modelos Químicos , Tamanho da Partícula , Reologia , Soluções , Propriedades de Superfície , Fatores de TempoRESUMO
The human hand interacts with the environment via physical contact, and tactile information is closely associated with finger movement patterns. Studying the relationship between motor primitives of the finger and the corresponding tactile feedback provides valuable insight into the nature of touch and informs the simulation of humanoid tactile. This research decomposed finger contact into three fundamental motor primitives: contact-on, stick-to-slip, and full slip, then examined the tactile features associated with each motor primitive, including the center of mass (COM) and the centroid of the contact pressure distribution matrix and the total contact area. The change in fingertip contact area during contact-on was in accordance with a first-order kinetic model. In the stick-to-slip, there was a generalized linear relationship between the fingertip skin stretch and the magnitude of the tangential force. Moreover, the skin stretch of the fingertip mirrored the direction of the motion. During the full slip, the COM's movement effectively represented the direction of the tangential force, with an error margin of no more than five degrees. Experiments showed that certain fingertip motions can be portrayed, transmitted, and replicated using tactile information. This research opens potential avenues for remote immersive physical communication in robotics and other related fields.
Assuntos
Percepção do Tato , Tato , Humanos , Extremidade Superior , Dedos , MovimentoRESUMO
BACKGROUND: Neisseria gonorrhoeae (N.g) is Gram-negative bacteria and can lead to endometritis in female. Toll-like receptors regulate immune response in various diseases. However, the roles of TLR2 and TLR4 in. Neisseria gonorrhoeae-induced infection damage in human endometrial epithelia were investigated. METHODS: hEECs were infected with N.g (MOI 10 and 100) and cell viability and apoptosis were measured by CCK8 and flow cytometry assays in both infected groups with the uninfected normal hEECs as negative control. TLR2/TLR4 proteins were measured by ELISA method. Pro-inflammatory markers NLRP3, PGES (PGE2) and TNF-α were assessed by RT-qPCR (mRNA expression) and Elisa (protein concentrations). Transfection assays were performed to up- or down- regulate expression of TLR2 and TLR4 so as to study the functions of TLR2/TLR4 in. N.g-infected hEECs, followed by apoptosis and inflammation assessment. Similarly, we explored the interactions between TLR2/TLR4 and Nrf2/NF-κB/p65 by knocking down TLR2/TLR4 to detect the signaling and further regulating the signaling to evaluate TLR2/ TLR4, apoptosis and inflammation in cells. RESULTS: N.g suppressed cell viabilities and induced cell apoptosis and inflammation. TLR2/TLR4 downregulation inhibited the infection damage. Nrf2 was activated while NF-κB/p65 was depleted as TLR2/ TLR4 was knocked down. Activation of Nrf2 and inhibition of NF-κB resulted in decrease of TLR2/TLR4, which could retard apoptosis and inflammation induced by N.g infection. CONCLUSION: TLR2/TLR4 depletion could alleviate the N.g-infected hEECs via Nrf2/NF-kB signaling, suggesting that TLR2/TLR4 inhibitors might serve as a treatment to reduce N.g infection in human endometrial epithelia.
Assuntos
Endometrite/imunologia , Gonorreia/imunologia , Neisseria gonorrhoeae/imunologia , Receptor 2 Toll-Like/metabolismo , Receptor 4 Toll-Like/metabolismo , Apoptose/efeitos dos fármacos , Apoptose/genética , Apoptose/imunologia , Benzamidas/farmacologia , Sobrevivência Celular/efeitos dos fármacos , Sobrevivência Celular/genética , Sobrevivência Celular/imunologia , Células Cultivadas , Di-Hidropiridinas/farmacologia , Dioxinas/farmacologia , Regulação para Baixo , Endometrite/tratamento farmacológico , Endometrite/microbiologia , Endometrite/patologia , Endométrio/citologia , Endométrio/imunologia , Endométrio/metabolismo , Endométrio/patologia , Células Epiteliais/imunologia , Células Epiteliais/metabolismo , Células Epiteliais/patologia , Feminino , Técnicas de Silenciamento de Genes , Gonorreia/tratamento farmacológico , Gonorreia/microbiologia , Gonorreia/patologia , Humanos , Fator 2 Relacionado a NF-E2/agonistas , Fator 2 Relacionado a NF-E2/metabolismo , Cultura Primária de Células , Transdução de Sinais/efeitos dos fármacos , Transdução de Sinais/imunologia , Receptor 2 Toll-Like/antagonistas & inibidores , Receptor 2 Toll-Like/genética , Receptor 4 Toll-Like/antagonistas & inibidores , Receptor 4 Toll-Like/genética , Fator de Transcrição RelA/antagonistas & inibidores , Fator de Transcrição RelA/metabolismoRESUMO
Unstable liquid flow in syringe pump-driven systems due to the low-speed vibration of the step motor is commonly observed as an unfavorable phenomenon, especially when the flow rate is relatively small. Upon the design of a convenient and cost-efficient microfluidic standing air bubble system, this paper studies the physical principles behind the flow stabilization phenomenon of the bubble-based hydraulic capacitors. A bubble-based hydraulic capacitor consists of three parts: tunable microfluidic standing air bubbles in specially designed crevices on the fluidic channel wall, a proximal pneumatic channel, and porous barriers between them. Micro-bubbles formed in the crevices during liquid flow and the volume of the bubble can be actively controlled by the pneumatic pressure changing in the proximal channel. When there is a flowrate fluctuation from the upstream, the flexible air-liquid interface would deform under the pressure variation, which is analogous to the capacitive charging/discharging process. The theoretical model based on Euler law and the microfluidic equivalent circuit was developed to understand the multiphysical phenomenon. Experimental data characterize the liquid flow stabilization performance of the flow stabilizer with multiple key parameters, such as the number and the size of microbubbles. The developed bubble-based hydraulic capacitor could minimize the flow pulses from syringe pumping by 75.3%. Furthermore, a portable system is demonstrated and compared with a commercial pressure-driven flow system. This study can enhance the understanding of the bubble-based hydraulic capacitors that would be beneficial in microfluidic systems where the precise and stable liquid flow is required.
RESUMO
Microbubbles are often used in chemistry, biophysics, and medicine. Properly controlled microbubbles have been proved beneficial for various applications by previous scientific endeavors. However, there is still a plenty of room for further development of efficient microbubble handling methods. Here, this paper introduces a tunable, stable, and robust microbubble interface handling mechanism, named as microfluidic standing air bubbles (µSABs), by studying the multiphysical phenomena behind the gas-liquid interface formation and variation. A basic µSAB system consists specially structured fluidic channels, pneumatic channels, and selectively permeable porous barriers between them. The µSABs originate inside the crevice structures on the fluidic channel walls in a repeatable and robust manner. The volumetric variation of the µSAB is a multiphysical phenomenon that dominated by the air diffusion between the pneumatic channel and the bubble. Theoretical analysis and experimental data illustrate the coupling processes of the repeatable and linear µSAB volumetric variation when operated under common handling conditions (control pneumatic pressure: -90 kPa to 200 kPa). Furthermore, an adjustable acoustic microstreaming is demonstrated as an application using the alterable µSAB gas-liquid interface. Derived equations and microscopic observations elucidate the mechanism of the continuous and linear regulation of the acoustic microstreaming using varying µSAB gas-liquid interfaces. The µSAB system provides a new tool to handle the flexible and controllable gas-liquid interfaces in a repeatable and robust manner, which makes it a promising candidate for innovative biochemical, biophysical, and medical applications.
RESUMO
The efficacy of DNA vaccines may be improved by small interfering (si)RNA adjuvants targeting pro-apoptotic genes. The aim of the present study was to investigate the capacity of siRNAs targeting B-cell lymphoma 2 homologous antagonist killer (BAK) and B-cell lymphoma 2-associated X protein (BAX) to improve the efficacy of a cytomegalovirus (CMV) vaccine. BALB/c mice were divided into four groups (n=18 in each): unimmunized and immunized with pcDNA 3.1-pp65 expressing CMV 65 kDa matrix phosphoprotein and BAK + BAX siRNAs, pcDNA 3.1-pp65 and control siRNA, or control pcDNA 3.1 and BAK + BAX siRNAs. Immunizations were performed twice with an interval of 3 weeks. CMV-specific mouse splenocyte interferon (IFN)-γ secretion was assessed by ELISPOT; furthermore, an in vivo cytotoxic T lymphocyte assay was performed 2 weeks after the last immunization. After lethal CMV challenge of the mice, body weight, virus titers in the spleens and salivary glands as well as survival were recorded. The amount of splenocytes secreting IFN-γ in response to CMV pp65 peptides and specific lysis of peptide-pulsed target cells were significantly higher in mice administered pcDNA3.1-pp65 and BAK + BAX siRNAs than those in mice administered pcDNA3.1-pp65 and control siRNA (P<0.05 for each). After the virus challenge, the virus titers in the spleens and salivary glands of mice given pcDNA3.1-pp65 and BAK + BAX siRNAs were significantly lower than those in mice immunized with pcDNA3.1-pp65 and control siRNA (P<0.05 for each). Furthermore, mice immunized with pcDNA 3.1-pp65 and control siRNA or BAK + BAX siRNAs survived for longer, and at 21 days after lethal CMV challenge, 66 and 100% of these mice survived, respectively. These mice also experienced less weight loss compared with mice immunized with pcDNA3.1-pp65 and control siRNA (P<0.05). In conclusion, intradermal administration of siRNAs targeting BAK and BAX improved the efficacy of CMV pp65 DNA vaccine.
RESUMO
In this study, we investigated the anti-vasculature effects and the antitumor effects of combining attenuated Salmonella typhimurium vaccine strain encoding murine vascular endothelial growth factor (VEGF) receptor-2 (flk1) with plasmid DNA vector encoding the murine interleukin-12 (mIL-12) gene. In combination, flk1 based DNA vaccine and mIL-12 slowed down tumor growth more effectively than either one alone. Splenocytes from the combined group were showed a strong CTL response against both the flk1 and tumor cells. Automated image analysis revealed that the mean microvessel density was significantly reduced after administering either flk1 based DNA vaccine or mIL-12. In addition, the combination of flk1 based DNA vaccine and mIL-12 appeared more effective at reducing the microvessel density of tumor (P<0.01, both comparisons). In summary, the antivasculature effect and the anti-tumor effect were better when the combination of flk1 based DNA vaccine and IL-12 was administered in comparison to the individual treatment groups, suggesting the synergistic action of flk1 based DNA vaccine and mIL-12.
Assuntos
Vacinas Anticâncer/uso terapêutico , Glioma/terapia , Interleucina-12/genética , Neovascularização Patológica , Vacinas de DNA/uso terapêutico , Receptor 2 de Fatores de Crescimento do Endotélio Vascular/imunologia , Animais , Testes Imunológicos de Citotoxicidade , Camundongos , Camundongos Endogâmicos C57BL , Salmonella typhimurium/genética , Células Tumorais CultivadasRESUMO
OBJECTIVE: To study the inhibitory effect of Jinye Baidu Preparation (JBP), a Chinese medicinal preparation, on human cytomegalovirus protein kinase pu197 and to explore its molecular mechanism in treating human cytomegalovirus (HCMV) infection. METHODS: Expression of the HCMV pu197mRNA in infected cells was measured by semi-quantitative RT-PCR before and after intervention of JBP or Ganciclovir (GCV), and effect of the two medicines on the proliferation activity of the infected cells was observed by MTT. RESULTS: Both JBP and GCV showed obvious inhibitory action on HCMV pu197mRNA. They could significantly enhance the proliferation activity of the cells 72 hours after HCMV infection. CONCLUSION: JBP could inhibit the gene expression and duplication of HCMV by inhibiting the gene expression of HCMV protein kinase pu197 to enhance the proliferation activity of the infected cells so as to achieve its anti-virus action.
Assuntos
Antivirais/farmacologia , Citomegalovirus/efeitos dos fármacos , Medicamentos de Ervas Chinesas/farmacologia , Proteínas Quinases/efeitos dos fármacos , Citomegalovirus/enzimologia , Citomegalovirus/genética , Embrião de Mamíferos , Fibroblastos/citologia , Fibroblastos/virologia , Humanos , Pulmão/citologia , Proteínas Quinases/biossíntese , Proteínas Quinases/genética , RNA Mensageiro/biossíntese , RNA Mensageiro/genética , Proteínas Virais/biossíntese , Proteínas Virais/efeitos dos fármacos , Proteínas Virais/genética , Replicação Viral/efeitos dos fármacosRESUMO
To sequentially handle fluids is of great significance in quantitative biology, analytical chemistry, and bioassays. However, the technological options are limited when building such microfluidic sequential processing systems, and one of the encountered challenges is the need for reliable, efficient, and mass-production available microfluidic pumping methods. Herein, we present a bubble-free and pumping-control unified liquid handling method that is compatible with large-scale manufacture, termed multilayer microfluidic sample isolated pumping (mµSIP). The core part of the mµSIP is the selective permeable membrane that isolates the fluidic layer from the pneumatic layer. The air diffusion from the fluidic channel network into the degassing pneumatic channel network leads to fluidic channel pressure variation, which further results in consistent bubble-free liquid pumping into the channels and the dead-end chambers. We characterize the mµSIP by comparing the fluidic actuation processes with different parameters and a flow rate range of 0.013 µl/s to 0.097 µl/s is observed in the experiments. As the proof of concept, we demonstrate an automatic sequential fluid handling system aiming at digital assays and immunoassays, which further proves the unified pumping-control and suggests that the mµSIP is suitable for functional microfluidic assays with minimal operations. We believe that the mµSIP technology and demonstrated automatic sequential fluid handling system would enrich the microfluidic toolbox and benefit further inventions.
RESUMO
AIM: To explore the correlation between Twist-related protein (Twist)1, fibroblast growth factor receptor (FGFR)2 and gastric adenocarcinoma differentiation and progression. METHODS: We evaluated Twist1 and FGFR2 in 52 gastric adenocarcinoma samples by immunohistochemistry and quantitative real time polymerase chain reaction, and analyzed the correlation between Twist1, FGFR2 and cancer differentiation. We also detected Twist1 and FGFR2 expression in gastric adenocarcinoma cell lines, and evaluated Twist1 influence on FGFR2 expression. In addition, we studied the role of FGFR2 in Twist1-promoted cancer progression, including proliferation, invasion and epithelial-mesenchymal transition (EMT). RESULTS: Twist1 and FGFR2 were detected in almost all the gastric adenocarcinoma samples. Twist1 (P = 0.0213) and FGFR2 (P = 0.0310) mRNA levels had a significant association with gastric adenocarcinoma differentiation. Moreover, Twist1 and FGFR2 expression in poorly differentiated cells (SNU-1 and SNU-16) was notably higher than in well-differentiated cells (MKN-7 and MKN-28). In poorly differentiated gastric adenocarcinomas, FGFR2 mRNA level was significantly positively correlated with Twist1 mRNA level (P = 0.004). Twist1 was proved to promote FGFR2 by regulating Twist1 expression by knockdown and overexpression. Additionally, Twist1 could induce proliferation, invasion and EMT in gastric cancer; of these, FGFR2 was required for invasion and EMT, rather than proliferation. CONCLUSION: Twist1 and FGFR2 are highly associated with differentiation of gastric adenocarcinoma; Twist1 can facilitate invasion and EMT in gastric adenocarcinoma via promotion of FGFR2 expression.