Intermolecular Interactions, Morphology, and Photovoltaic Patterns in p-i-n Heterojunction Solar Cells With Fluorine-Substituted Organic Photovoltaic Materials.

During the layer-by-layer (LBL) processing of polymer solar cells (PSCs), the swelling and molecule interdiffusion are essential for achieving precise, controllable vertical morphology, and thus efficient PSCs. However, the influencing mechanism of material properties on morphology and correlated device performance has not been paid much attention. Herein, a series of fluorinated/non-fluorinated polymer donors (PBDB-T and PBDB-TF) and non-fullerene acceptors (ITIC, IT-2F, and IT-4F) are employed to investigate the performance of LBL devices. The impacts of fluorine substitution on the repulsion and miscibility between the donor and acceptor, as well as the molecular arrangement of the donor/acceptor and the vertical distribution of the LBL devices are systematically explored by the measurement of donor/acceptor Flory-Huggins interaction parameters, spectroscopic ellipsometry, and neutron reflectivity, respectively. With efficient charge transfer due to the ideal vertical and horizon morphology properties, devices based on PBDB-TF/IT-4F exhibit the highest fill factors (FFs) as well as champion power conversion efficiencies (PCEs). With this guidance, high-performance LBL devices with PCE of 17.2%, 18.5%, and 19.1% are obtained by the fluorinated blend of PBDB-TF/Y6, PBDB-TF/L8-BO, and D18/L8-BO respectively.

A New Ester-Substituted Quinoxaline-Based Narrow Bandgap Polymer Donor for Organic Solar Cells.

The electron-deficient ester group substitution in the sidechain of the commonly used electron-withdrawing quinoxaline (Qx) unit is seldom studied, while ester-substituted Qx units possess easy syntheses and facile modulation of the polymer solubility, and the enhanced electron-withdrawing property of ester substituted Qx unit can theoretically broaden the optical absorption of the resulting polymers and improve the open circuit voltage in the corresponding organic solar cells (OSCs). In this work, a novel ester-substituted Qx-based narrow bandgap polymer (NBG) donor material PBDTT-EFQx, which exhibits an absorption edge of 790 nm (bandgap < 1.6 eV), is designed and synthesized. Results show that the OSCs composed of PBDTT-EFQx and PC71 BM present the highest power conversion efficiency (PCE) of 6.8%, compared to PCEs of 5.0% for PBDTT-EFQx:ITIC based devices and 4.1% for PBDTT-EFQx:N2200 based devices, respectively. Characterizations and analyses indicate that the PC71 BM-based OSCs have well-matched energy levels, better complementary light absorption, the highest and most balanced carrier mobilities, as well as the lowest degree of recombination losses, and therefore, leading to the highest PCE among the three types of OSCs. This work reveals that the ester-substituted quinoxaline unit is one of the potential building blocks for NBG polymer donors.

Pronounced Dependence of All-Polymer Solar Cells Photovoltaic Performance on the Alkyl Substituent Patterns in Large Bandgap Polymer Donors.

For all-polymer solar cells which are composed of polymer donors and polymer acceptors, the effect of alkyl side chains on photovoltaic performance is a matter of some debate, and this effect remains difficult to forecast. In this concise contribution, we demonstrate that three alkyls namely branched alkyl 2-butyloctyl (2BO), long linear alkyl n-dodecyl (C12), and double-short linear alkyl n-hexyls (DC6) incorporated into the side chains of large bandgap polymer donor PBDT-TTz can induce considerable, of significance, and different electronic, optical, and morphological parameters. Systematic studies shed light on the critical role of the double-short linear alkyl n-hexyls (DC6) in (i) producing large ionization potential value, (ii) increasing propensity of the polymer to order along the π-stacking direction, (iii) generating polymer crystallites with more preferential "face-on" orientation, consequently, (iv) improvement of carriers transportation, (v) suppression of charge recombination, (vi) reduction of energy loss in all-polymer devices. In parallel, we unearth that the PBDT-TTz with double-short linear alkyl n-hexyls (DC6) represents the highest efficiency of 8.3 %, whereas, the other two PBDT-TTz analogues (2BO, C12) yield efficiencies of less than 3 % in optimized all-polymer solar cells. Though branched or long linear alkyl side chains (2BO, C12) have been applied to provide the solution processability of conjugated polymers, motifs bearing multiple short linear alkyl substituents (DC6) are proved critical to the development of high performing polymers.

Isoindigo-3,4-Difluorothiophene Polymer Acceptors Yield "All-Polymer" Bulk-Heterojunction Solar Cells with over 7 % Efficiency.

Poly(isoindigo-alt-3,4-difluorothiophene) (PIID[2F]T) analogues used as "polymer acceptors" in bulk-heterojunction (BHJ) solar cells achieve >7 % efficiency when used in conjunction with the polymer donor PBFTAZ (model system; copolymer of benzo[1,2-b:4,5-b']dithiophene and 5,6-difluorobenzotriazole). Considering that most efficient polymer-acceptor alternatives to fullerenes (e.g. PC61 BM or its C71 derivative) are based on perylenediimide or naphthalenediimide motifs thus far, branched alkyl-substituted PIID[2F]T polymers are particularly promising non-fullerene candidates for "all-polymer" BHJ solar cells.

Thieno[3,4-c]pyrrole-4,6-dione-3,4-difluorothiophene Polymer Acceptors for Efficient All-Polymer Bulk Heterojunction Solar Cells.

Branched-alkyl-substituted poly(thieno[3,4-c]pyrrole-4,6-dione-alt-3,4-difluorothiophene) (PTPD[2F]T) can be used as a polymer acceptor in bulk heterojunction (BHJ) solar cells with a low-band-gap polymer donor (PCE10) commonly used with fullerenes. The "all-polymer" BHJ devices made with PTPD[2F]T achieve efficiencies of up to 4.4 %. While, to date, most efficient polymer acceptors are based on perylenediimide or naphthalenediimide motifs, our study of PTPD[2F]T polymers shows that linear, all-thiophene systems with adequately substituted main chains can also be conducive to efficient BHJ solar cells with polymer donors.

Isomerization of Benzothiadiazole Yields a Promising Polymer Donor and Organic Solar Cells with Efficiency of 19.0.

The exploration of high-performance and low-cost wide-bandgap polymer donors remains critical to achieve high-efficiency nonfullerene organic solar cells (OSCs) beyond current thresholds. Herein, the 1,2,3-benzothiadiazole (iBT), which is an isomer of 2,1,3-benzothiadiazole (BT), is used to design wide-bandgap polymer donor PiBT. The PiBT-based solar cells reach efficiency of 19.0%, which is one of the highest efficiencies in binary OSCs. Systemic studies show that isomerization of BT to iBT can finely regulate the polymers' photoelectric properties including i) increasing the extinction coefficient and photon harvest, ii) downshifting the highest occupied molecular orbital energy levels, iii) improving the coplanarity of polymer backbones, iv) offering good thermodynamic miscibility with acceptors. Consequently, the PiBT:Y6 bulk heterojunction (BHJ) device simultaneously reaches advantageous nanoscale morphology, efficient exciton generation and dissociation, fast charge transportation, and suppressed charge recombination, leading to larger VOC of 0.87 V, higher JSC of 28.2 mA cm-2, greater fill factor of 77.3%, and thus higher efficiency of 19.0%, while the analog-PBT-based OSCs reach efficiency of only 12.9%. Moreover, the key intermediate iBT can be easily afforded from industry chemicals via two-step procedure. Overall, this contribution highlights that iBT is a promising motif for designing high-performance polymer donors.

High-efficiency polymer solar cells via the incorporation of an amino-functionalized conjugated metallopolymer as a cathode interlayer.

An amino-functionalized conjugated metallopolymer PFEN-Hg was developed as a cathode interlayer for inverted polymer solar cells. The resulting devices exhibited significantly improved performance with power conversion efficiencies exceeding 9%. Moreover, good device performance was achievable with the PFEN-Hg over a wider range of film thickness, likely due to the Hg-Hg interactions and improved π-π stacking.

An Alternating D1-A-D2-A Conjugated Ternary Copolymer Containing [1,2,5]selenadiazolo[3,4-c]pyridine Unit With Photocurrent Response Up to 1,100 nm.

Two narrow band gap conjugated ternary copolymers comprising two electron-rich (donor, D) and one electron-deficient (acceptor, A) moieties regularly alternating along the polymer backbone were designed and synthesized. The polymers with the repeating unit in a D1-A-D2-A manner were constructed by copolymerizing a bisstannyled-D1 (D1 = n-alkyl-substituted cyclopentadithiophene) and a dibromo-monomer (Br-A-D2-A-Br, D2 = branched-alkyl-substituted cyclopentadithiophene, A =[1,2,5]selenadiazolo[3,4-c]pyridine or 5-fluorobenzo[c][1,2,5]selenadiazole) through a palladium-catalyzed Stille polymerization. This approach that enables variations in the donor fragment substituents can not only control the polymer regiochemistry but also the solubility. Two ternary copolymers exhibited absorbance up to near-infrared region along with relatively narrow band gap in the range of 1.02-1.26 eV. The polymeric photovoltaic cells based on CDTPSE/PC61BM show the short circuit density of 1.45 mA cm-2, open current voltage of 0.53 V, and photocurrent spectra response from 300 to 1,150 nm under AM 1.5 simulator (100 mW cm-2). It is indicated that it can be potentially applied to near infrared photodetectors.

Corrigendum: Impact of Polymer Backbone Fluorination on the Charge Generation/Recombination Patterns and Vertical Phase Segregation in Bulk Heterojunction Organic Solar Cells.

[This corrects the article DOI: 10.3389/fchem.2020.00144.].

Impact of Polymer Backbone Fluorination on the Charge Generation/Recombination Patterns and Vertical Phase Segregation in Bulk Heterojunction Organic Solar Cells.

Incorporating fluorine (-F) substituents along the main-chains of polymer donors and acceptors is an effective strategy toward efficient bulk-heterojunction (BHJ) solar cells. Specifically, F-substituted polymers often exhibit planar conformations, leading to favorable packing, and electronic coupling. However, the effects of fluorine substituents on the charge generation and recombination characteristics that determine the overall efficiency of BHJ active layers remain critically important issues to examine. In this report, two PBDT[2X]T polymer analogs -poly[4,8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4, 5-b']dithiophene-thiophene] [PBDT[2H]T] and its F-substituted counterpart poly[4,8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4,5-b']dithiophene-3,4-difluoro-thiophene] [PBDT[2F]T]-are studied to systematically examine how -F substituents impact the blend morphology, charge generation, carrier recombination and extraction in BHJ solar cells. Considering the large efficiency differences between PBDT[2H]T- and PBDT[2F]T-based BHJ devices, significant emphasis is given to characterizing the out-of-plane morphology of the blend films as vertical phase-separation characteristics are known to have dramatic effects on charge transport and carrier extraction in polymer-fullerene BHJ solar cells. Herein, we use electron energy loss spectroscopy (EELS) in tandem with charge transport characterization to examine PBDT[2X]T-fullerene blend films. Our analyses show that PBDT[2H]T and PBDT[2F]T possess very different charge generation, recombination and extraction characteristics, resulting from distinct aggregation, and phase-distribution within the BHJ blend films.

Synergistic Effects of Polymer Donor Backbone Fluorination and Nitrogenation Translate into Efficient Non-Fullerene Bulk-Heterojunction Polymer Solar Cells.

State-of-the-art non-fullerene bulk-heterojunction (BHJ) polymer solar cells outperform the more extensively studied polymer-fullerene BHJ solar cells in terms of efficiency, thermal-, and photostability. Considering the strong light absorption in the near-infrared region (600-1000 nm) for most of the efficient acceptors, the exploration of high-performing large band gap (LBG) polymer donors with complementary optical absorption ranging from 400 to 700 nm remains critical. In this work, the strategy of concurrently incorporating fluorine (-F) and unsaturated nitrogen (-N) substituents along the polymer backbones is used to develop the LBG polymer donor PB[N][F]. Results show that the F- and N-substituted polymer donor PB[N][F] realizes up to 14.4% efficiency in BHJ photovoltaic devices when paired with a benchmark molecule acceptor Y6, which largely outperforms the analogues PB with an efficiency of only 3.6% and PB[N] with an efficiency of 11.8%. Systematic examinations show that synergistic effects of polymer backbone fluorination and nitrogenation can significantly increase ionization potential values, improve charge transport, and reduce bimolecular recombination and trap-assisted recombination in the PB[N][F]:Y6 BHJ system. Importantly, our study shows that the F- and N-substituted conjugated polymers are promising electron-donor materials for solution-processed non-fullerene BHJ solar cells.

Quantitative Determination of the Vertical Segregation and Molecular Ordering of PBDB-T/ITIC Blend Films with Solvent Additives.

The vertical component distribution of bulk heterojunction (BHJ) active film shows a significant impact on determining the device performance in polymer solar cells (PSCs). Processing solvent additives are well known for regulating the BHJ active layer morphology; however, there are few reports regarding the quantitative evaluation of the effect. Herein, a study of the quantitative determination of the vertical segregation in combination of molecular ordering of PBDB-T/ITIC blend films with various 1,8-diiodooctane (DIO) contents is provided. A 0.5% (volume ratio) DIO-added blend film achieves the highest power conversion efficiency of 10.75%. The reduced performance of the PSCs resulted from the excessive vertical component segregation and overcrystallization investigated by various techniques. X-ray photoelectron spectroscopy indicates that DIO aggravates the PBDB-T enrichment region at the air side. Neutron reflectivity further quantitatively figures out the phase separation effect. Although increased crystallinity of ITIC and a higher face-on ratio of PBDB-T in active layer were obtained with increased DIO content approved by grazing-incidence wide-angle X-ray scattering (GIWAXS), the enhanced vertical distribution along with the enhanced crystal size of ITIC leads to the reduced performance of the PSCs due to the reduced carrier transportation paths between donor and acceptor.

Impact of Donor-Acceptor Interaction and Solvent Additive on the Vertical Composition Distribution of Bulk Heterojunction Polymer Solar Cells.

The vertical composition distribution of a bulk heterojunction (BHJ) photoactive layer is known to have dramatic effects on photovoltaic performance in polymer solar cells. However, the vertical composition distribution evolution rules of BHJ films are still elusive. In this contribution, three BHJ film systems, composed of polymer donor PBDB-T, and three different classes of acceptor (fullerene acceptor PCBM, small-molecule acceptor ITIC, and polymer acceptor N2200) are systematically investigated using neutron reflectometry to examine how donor-acceptor interaction and solvent additive impact the vertical composition distribution. Our results show that those three BHJ films possess homogeneous vertical composition distributions across the bulk of the film, while very different composition accumulations near the top and bottom surface were observed, which could be attributed to different repulsion, miscibility, and phase separation between the donor and acceptor components as approved by the measurement of the donor-acceptor Flory-Huggins interaction parameter χ. Moreover, the solvent additive 1,8-diiodooctane (DIO) can induce more distinct vertical composition distribution especially in nonfullerene acceptor-based BHJ films. Thus, higher power conversion efficiencies were achieved in inverted solar cells because of facilitated charge transport in the active layer, improved carrier collection at electrodes, and suppressed charge recombination in BHJ solar cells.

Phytotoxicity of ionic liquids with different structures on wheat seedlings and evaluation of their toxicity attenuation at the presence of modified biochar by adsorption effect.

The toxic effects of eight common ionic liquids (ILs) on wheat seedlings was evaluated with specific emphasis on the influence of concentration range, anion species and cation chain length of ILs. The growth of wheat seeds was significantly inhibited by ILs, especially under higher concentration, presence of the fluoride anion and the longer alkyl chain length of the cation. The modified biochar (PB-K-N) efficiently removed the ILs from aqueous solutions, the order of the adsorption capacities was as follows: [Bmim]OAc [Bmim]C7H5O2 [Bmim]BF4 [Bmim]Br, [Domim]Br [BPy]Br [Omim]Br [Bmim]Br [Emim]Br. Furthermore, the wheat growth of all ILs groups except [Bmim]BF4 group in the presence of PB-K-N was also similar to that of the control groups, which clearly demonstrated that PB-K-N could decrease or alleviate toxicity of ILs toward wheat by adsorption effect. Therefore, the biochar application was effective in improving plant resistance to ILs stress by adsorption, to reduce the phytotoxicity of ILs and provide an alternative approach for the utilization of PB-K-N in ILs contaminated water and soils.

Donor-Acceptor Copolymers Based on Thermally Cleavable Indigo, Isoindigo, and DPP Units: Synthesis, Field Effect Transistors, and Polymer Solar Cells.

A series of donor-acceptor type of π-conjugated copolymers based on tert-butoxycarbonyl (t-Boc) substituted indigo, isoindigo or diketopyrrolopyrrole as the acceptor unit and a benzodithiophene derivative as the donor unit was designed and synthesized. These copolymers can be readily dissolved in organic solvents and can produce uniform films by solution deposition. Thermal treatment of copolymer films at 200 °C for 10 min resulted in elimination of t-Boc side groups in nearly quantitative yield as suggested by thermogravimetric analysis and Fourier transform infrared spectroscopy. The elimination of the bulky t-Boc side groups resulted in the emergence of N-H···O═C hydrogen bonding interactions by virtue of the lactam structures of the indigo, isoindigo and diketopyrrolopyrrole units. Of particular interests is the distinctly increased field-effect mobility of these copolymers after thermal treatment, which may arise from the enhanced coplanarity and intermolecular ordering of the indigo, isoindigo or diketopyrrolopyrrole units after elimination of the bulky t-Boc side groups. These results demonstrate that the incorporation of latent side groups provides a viable strategy to construct conjugated polymers that can attain more ordered intermolecular stacking by simple thermal treatments. On the other hand, despite the thermal cleavage of t-Boc groups can also lead to increased ordering of polymer chains when blending with [6,6]-phenyl C71 butyric acid methyl ester, the photovoltaic performances of the resulting bulk heterojunction solar cells did not obviously increase due to the serious phase separation and coarsening of the film morphology.

Highly efficient inverted polymer solar cells based on a cross-linkable water-/alcohol-soluble conjugated polymer interlayer.

A cross-linkable water/alcohol soluble conjugated polymer (WSCP) material poly[9,9-bis(6'-(N,N-diethylamino)propyl)-fluorene-alt-9,9-bis(3-ethyl(oxetane-3-ethyloxy)-hexyl) fluorene] (PFN-OX) was designed. The cross-linkable nature of PFN-OX is good for fabricating inverted polymer solar cells (PSCs) with well-defined interface and investigating the detailed working mechanism of high-efficiency inverted PSCs based on poly[4,8-bis(2-ethylhexyloxyl)benzo[1,2-b:4,5-b']dithio-phene-2,6-diyl-alt-ethylhexyl-3-fluorothithieno[3,4-b]thiophene-2-carboxylate-4,6-diyl] (PTB7) and (6,6)-phenyl-C71-butyric acid methyl ester (PC71BM) blend active layer. The detailed working mechanism of WSCP materials in high-efficiency PSCs were studied and can be summarized into the following three effects: a) PFN-OX tunes cathode work function to enhance open-circuit voltage (Voc); b) PFN-OX dopes PC71BM at interface to facilitate electron extraction; and c) PFN-OX extracts electrons and blocks holes to enhance fill factor (FF). On the basis of this understanding, the hole-blocking function of the PFN-OX interlayer was further improved with addition of a ZnO layer between ITO and PFN-OX, which led to inverted PSCs with a power conversion efficiency of 9.28% and fill factor high up to 74.4%.

Enhanced photovoltaic performance by modulating surface composition in bulk heterojunction polymer solar cells based on PBDTTT-C-T/PC71 BM.

For the blend film of PBDTTT-C-T:PC71 BM, the use of 1,8-diiodooctane as the solvent additive enriches the polymer at the top surface, so that a power conversion efficiency of 9.13% is recorded in the inverted polymer solar cell based on the blend, which is much higher than that of the device with conventional structure.

A series of new medium-bandgap conjugated polymers based on naphtho[1,2-c:5,6-c]bis(2-octyl-[1,2,3]triazole) for high-performance polymer solar cells.

A series of novel conjugated copolymers based on naphtho[1,2-c:5,6-c]bis(2-octyl-[1,2,3]triazole) (TZNT) are synthesized. These copolymers exhibit medium bandgaps of ≈1.9 eV. One of them demonstrates a high performance of up to 6.10% power conversion efficiency in a bulk-heterojunction (BHJ) solar-cell device. The performance can be further enhanced to 7.11% when applied in an inverted device architecture, using PF3 N-OX as an interfacial modifier.