RESUMO
Allometric rules provide insights into the structure-function relationships across species and scales and are commonly used in ecology. The fields of agronomy, plant phenotyping and modeling also need simplifications such as allometric rules to reconcile data at different temporal and spatial levels (organs/canopy). This paper explores the variations in relationships for wheat regarding (i) the distribution of crop green area between leaves and stems, and (ii) the allocation of above-ground biomass between leaves and stems during the vegetative period, using a large dataset covering different years, countries, genotypes and management practices. Our results show that the relationship between leaf and stem area was linear, genotype-specific, and sensitive to radiation. The relationship between leaf and stem biomass depended on genotype and nitrogen fertilization. The mass per area, associating area and biomass for both leaf and stem, varied strongly by developmental stage and was significantly affected by environment and genotype. These allometric rules were evaluated with satisfactory performance, and their potential use is discussed with regard to current phenotyping techniques and plant/crop models. Our results enable the definition of models and minimum datasets required for characterizing diversity panels and making predictions in various G × E × M contexts.
RESUMO
Canopy light interception determines the amount of energy captured by a crop, and is thus critical to modeling crop growth and yield, and may substantially contribute to the prediction uncertainty of crop growth models (CGMs). We thus analyzed the canopy light interception models of the 26 wheat (Triticum aestivum) CGMs used by the Agricultural Model Intercomparison and Improvement Project (AgMIP). Twenty-one CGMs assume that the light extinction coefficient (K) is constant, varying from 0.37 to 0.80 depending on the model. The other models take into account the illumination conditions and assume either that all green surfaces in the canopy have the same inclination angle (θ) or that θ distribution follows a spherical distribution. These assumptions have not yet been evaluated due to a lack of experimental data. Therefore, we conducted a field experiment with five cultivars with contrasting leaf stature sown at normal and double row spacing, and analyzed θ distribution in the canopies from three-dimensional canopy reconstructions. In all the canopies, θ distribution was well represented by an ellipsoidal distribution. We thus carried out an intercomparison between the light interception models of the AgMIP-Wheat CGMs ensemble and a physically based K model with ellipsoidal leaf angle distribution and canopy clumping (KellC). Results showed that the KellC model outperformed current approaches under most illumination conditions and that the uncertainty in simulated wheat growth and final grain yield due to light models could be as high as 45%. Therefore, our results call for an overhaul of light interception models in CGMs.
Assuntos
Modelos Teóricos , Triticum/crescimento & desenvolvimento , Produtos Agrícolas , Grão Comestível/crescimento & desenvolvimento , Grão Comestível/efeitos da radiação , Luz , Folhas de Planta/crescimento & desenvolvimento , Folhas de Planta/efeitos da radiação , Triticum/efeitos da radiaçãoRESUMO
The extraction of desirable heritable traits for crop improvement from high-throughput phenotyping (HTP) observations remains challenging. We developed a modeling workflow named "Digital Plant Phenotyping Platform" (D3P), to access crop architectural traits from HTP observations. D3P couples the Architectural model of DEvelopment based on L-systems (ADEL) wheat (Triticum aestivum) model (ADEL-Wheat), which describes the time course of the three-dimensional architecture of wheat crops, with simulators of images acquired with HTP sensors. We demonstrated that a sequential assimilation of the green fraction derived from Red-Green-Blue images of the crop into D3P provides accurate estimates of five key parameters (phyllochron, lamina length of the first leaf, rate of elongation of leaf lamina, number of green leaves at the start of leaf senescence, and minimum number of green leaves) of the ADEL-Wheat model that drive the time course of green area index and the number of axes with more than three leaves at the end of the tillering period. However, leaf and tiller orientation and inclination characteristics were poorly estimated. D3P was also used to optimize the observational configuration. The results, obtained from in silico experiments conducted on wheat crops at several vegetative stages, showed that the accessible traits could be estimated accurately with observations made at 0° and 60° zenith view inclination with a temporal frequency of 100 °Cd (degree day). This illustrates the potential of the proposed holistic approach that integrates all the available information into a consistent system for interpretation. The potential benefits and limitations of the approach are further discussed.
Assuntos
Produtos Agrícolas/crescimento & desenvolvimento , Folhas de Planta/crescimento & desenvolvimento , Triticum/crescimento & desenvolvimento , FenótipoRESUMO
Single-cell RNA sequencing (scRNA-seq) enables researchers to reveal previously unknown cell heterogeneity and functional diversity, which is impossible with bulk RNA sequencing. Clustering approaches are widely used for analyzing scRNA-seq data and identifying cell types and states. In the past few years, various advanced computational strategies emerged. However, the low generalization and high computational cost are the main bottlenecks of existing methods. In this study, we established a novel computational framework, scFseCluster, for scRNA-seq clustering analysis. scFseCluster incorporates a metaheuristic algorithm (Feature Selection based on Quantum Squirrel Search Algorithm) to extract the optimal gene set, which largely guarantees the performance of cell clustering. We conducted simulation experiments in several aspects to verify the performance of the proposed approach. scFseCluster performed very well on eight benchmark scRNA-seq datasets because of the optimal gene sets obtained using the Feature Selection based on Quantum Squirrel Search Algorithm. The comparative study demonstrated the significant advantages of scFseCluster over seven State-of-the-Art algorithms. In addition, our analysis shows that feature selection on high-variable genes can significantly improve clustering performance. In conclusion, our study demonstrates that scFseCluster is a highly versatile tool for enhancing scRNA-seq data clustering analysis.
Assuntos
Perfilação da Expressão Gênica , Análise da Expressão Gênica de Célula Única , Animais , Perfilação da Expressão Gênica/métodos , Análise de Célula Única/métodos , Análise por Conglomerados , SciuridaeRESUMO
Accurate assessment of crop biochemical profiles plays a crucial role in diagnosing their physiological status. The conventional destructive methods, although reliable, demand extensive laboratory work for measuring various traits. On the other hand, nondestructive techniques, while efficient and adaptable, often suffer from reduced precision due to the intricate interplay of the field environment and canopy structure. Striking a delicate balance between efficiency and accuracy, we have developed the Bio-Master phenotyping system. This system is capable of simultaneously measuring four vital biochemical components of the canopy profile: dry matter, water, chlorophyll, and nitrogen content. Bio-Master initiates the process by addressing structural influences, through segmenting the fresh plant and then further chopping the segment into uniform small pieces. Subsequently, the system quantifies hyperspectral reflectance and fresh weight over the sample within a controlled dark chamber, utilizing an independent light source. The final step involves employing an embedded estimation model to provide synchronous estimates for the four biochemical components of the measured sample. In this study, we established a comprehensive training dataset encompassing a wide range of rice varieties, nitrogen levels, and growth stages. Gaussian process regression model was used to estimate biochemical contents utilizing reflectance data obtained by Bio-Master. Leave-one-out validation revealed the model's capacity to accurately estimate these contents at both leaf and plant scales. With Bio-Master, measuring a single rice plant takes approximately only 5 min, yielding around 10 values for each of the four biochemical components across the vertical profile. Furthermore, the Bio-Master system allows for immediate measurements near the field, mitigating potential alterations in plant status during transportation and processing. As a result, our measurements are more likely to faithfully represent in situ values. To summarize, the Bio-Master phenotyping system offers an efficient tool for comprehensive crop biochemical profiling. It harnesses the benefits of remote sensing techniques, providing significantly greater efficiency than conventional destructive methods while maintaining superior accuracy when compared to nondestructive approaches.
RESUMO
Deep learning has been widely used for plant disease recognition in smart agriculture and has proven to be a powerful tool for image classification and pattern recognition. However, it has limited interpretability for deep features. With the transfer of expert knowledge, handcrafted features provide a new way for personalized diagnosis of plant diseases. However, irrelevant and redundant features lead to high dimensionality. In this study, we proposed a swarm intelligence algorithm for feature selection [salp swarm algorithm for feature selection (SSAFS)] in image-based plant disease detection. SSAFS is employed to determine the ideal combination of handcrafted features to maximize classification success while minimizing the number of features. To verify the effectiveness of the developed SSAFS algorithm, we conducted experimental studies using SSAFS and 5 metaheuristic algorithms. Several evaluation metrics were used to evaluate and analyze the performance of these methods on 4 datasets from the UCI machine learning repository and 6 plant phenomics datasets from PlantVillage. Experimental results and statistical analyses validated the outstanding performance of SSAFS compared to existing state-of-the-art algorithms, confirming the superiority of SSAFS in exploring the feature space and identifying the most valuable features for diseased plant image classification. This computational tool will allow us to explore an optimal combination of handcrafted features to improve plant disease recognition accuracy and processing time.
RESUMO
The green fraction (GF), which is the fraction of green vegetation in a given viewing direction, is closely related to the light interception ability of the crop canopy. Monitoring the dynamics of GF is therefore of great interest for breeders to identify genotypes with high radiation use efficiency. The accuracy of GF estimation depends heavily on the quality of the segmentation dataset and the accuracy of the image segmentation method. To enhance segmentation accuracy while reducing annotation costs, we developed a self-supervised strategy for deep learning semantic segmentation of rice and wheat field images with very contrasting field backgrounds. First, the Digital Plant Phenotyping Platform was used to generate large, perfectly labeled simulated field images for wheat and rice crops, considering diverse canopy structures and a wide range of environmental conditions (sim dataset). We then used the domain adaptation model cycle-consistent generative adversarial network (CycleGAN) to bridge the reality gap between the simulated and real images (real dataset), producing simulation-to-reality images (sim2real dataset). Finally, 3 different semantic segmentation models (U-Net, DeepLabV3+, and SegFormer) were trained using 3 datasets (real, sim, and sim2real datasets). The performance of the 9 training strategies was assessed using real images captured from various sites. The results showed that SegFormer trained using the sim2real dataset achieved the best segmentation performance for both rice and wheat crops (rice: Accuracy = 0.940, F1-score = 0.937; wheat: Accuracy = 0.952, F1-score = 0.935). Likewise, favorable GF estimation results were obtained using the above strategy (rice: R2 = 0.967, RMSE = 0.048; wheat: R2 = 0.984, RMSE = 0.028). Compared with SegFormer trained using a real dataset, the optimal strategy demonstrated greater superiority for wheat images than for rice images. This discrepancy can be partially attributed to the differences in the backgrounds of the rice and wheat fields. The uncertainty analysis indicated that our strategy could be disrupted by the inhomogeneity of pixel brightness and the presence of senescent elements in the images. In summary, our self-supervised strategy addresses the issues of high cost and uncertain annotation accuracy during dataset creation, ultimately enhancing GF estimation accuracy for rice and wheat field images. The best weights we trained in wheat and rice are available: https://github.com/PheniX-Lab/sim2real-seg.
RESUMO
The number of leaves at a given time is important to characterize plant growth and development. In this work, we developed a high-throughput method to count the number of leaves by detecting leaf tips in RGB images. The digital plant phenotyping platform was used to simulate a large and diverse dataset of RGB images and corresponding leaf tip labels of wheat plants at seedling stages (150,000 images with over 2 million labels). The realism of the images was then improved using domain adaptation methods before training deep learning models. The results demonstrate the efficiency of the proposed method evaluated on a diverse test dataset, collecting measurements from 5 countries obtained under different environments, growth stages, and lighting conditions with different cameras (450 images with over 2,162 labels). Among the 6 combinations of deep learning models and domain adaptation techniques, the Faster-RCNN model with cycle-consistent generative adversarial network adaptation technique provided the best performance (R2 = 0.94, root mean square error = 8.7). Complementary studies show that it is essential to simulate images with sufficient realism (background, leaf texture, and lighting conditions) before applying domain adaptation techniques. Furthermore, the spatial resolution should be better than 0.6 mm per pixel to identify leaf tips. The method is claimed to be self-supervised since no manual labeling is required for model training. The self-supervised phenotyping approach developed here offers great potential for addressing a wide range of plant phenotyping problems. The trained networks are available at https://github.com/YinglunLi/Wheat-leaf-tip-detection.
RESUMO
Salt stress is one of the major environmental stress factors that affect and limit wheat production worldwide. Therefore, properly evaluating wheat genotypes during the germination stage could be one of the effective ways to improve yield. Currently, phenotypic identification platforms are widely used in the seed breeding process, which can improve the speed of detection compared with traditional methods. We developed the Wheat Seed Vigour Assessment System (WSVAS), which enables rapid and accurate detection of wheat seed germination using the lightweight convolutional neural network YOLOv4. The WSVAS system can automatically acquire, process and analyse image data of wheat varieties to evaluate the response of wheat seeds to salt stress under controlled environments. The WSVAS image acquisition system was set up to continuously acquire images of seeds of four wheat varieties under three types of salt stress. In this paper, we verified the accuracy of WSVAS by comparing manual scoring. The cumulative germination curves of wheat seeds of four genotypes under three salt stresses were also investigated. In this study, we compared three models, VGG16 + Faster R-CNN, ResNet50 + Faster R-CNN and YOLOv4. We found that YOLOv4 was the best model for wheat seed germination target detection, and the results showed that the model achieved an average detection accuracy (mAP) of 97.59%, a recall rate (Recall) of 97.35% and the detection speed was up to 6.82 FPS. This proved that the model could effectively detect the number of germinating seeds in wheat. In addition, the germination rate and germination index of the two indicators were highly correlated with germination vigour, indicating significant differences in salt tolerance amongst wheat varieties. WSVAS can quantify plant stress caused by salt stress and provides a powerful tool for salt-tolerant wheat breeding.
RESUMO
The Global Wheat Head Detection (GWHD) dataset was created in 2020 and has assembled 193,634 labelled wheat heads from 4700 RGB images acquired from various acquisition platforms and 7 countries/institutions. With an associated competition hosted in Kaggle, GWHD_2020 has successfully attracted attention from both the computer vision and agricultural science communities. From this first experience, a few avenues for improvements have been identified regarding data size, head diversity, and label reliability. To address these issues, the 2020 dataset has been reexamined, relabeled, and complemented by adding 1722 images from 5 additional countries, allowing for 81,553 additional wheat heads. We now release in 2021 a new version of the Global Wheat Head Detection dataset, which is bigger, more diverse, and less noisy than the GWHD_2020 version.
RESUMO
The detection of wheat heads in plant images is an important task for estimating pertinent wheat traits including head population density and head characteristics such as health, size, maturity stage, and the presence of awns. Several studies have developed methods for wheat head detection from high-resolution RGB imagery based on machine learning algorithms. However, these methods have generally been calibrated and validated on limited datasets. High variability in observational conditions, genotypic differences, development stages, and head orientation makes wheat head detection a challenge for computer vision. Further, possible blurring due to motion or wind and overlap between heads for dense populations make this task even more complex. Through a joint international collaborative effort, we have built a large, diverse, and well-labelled dataset of wheat images, called the Global Wheat Head Detection (GWHD) dataset. It contains 4700 high-resolution RGB images and 190000 labelled wheat heads collected from several countries around the world at different growth stages with a wide range of genotypes. Guidelines for image acquisition, associating minimum metadata to respect FAIR principles, and consistent head labelling methods are proposed when developing new head detection datasets. The GWHD dataset is publicly available at http://www.global-wheat.com/and aimed at developing and benchmarking methods for wheat head detection.
RESUMO
Rapid, non-destructive and accurate detection of crop N status is beneficial for optimized fertilizer applications and grain quality prediction in the context of precision crop management. Previous research on the remote estimation of crop N nutrition status was mostly conducted with ground-based spectral data from nadir or oblique angles. Few studies investigated the performance of unmanned aerial vehicle (UAV) based multispectral imagery in regular nadir views for such a purpose, not to mention the feasibility of oblique or multi-angular images for improved estimation. This study employed a UAV-based five-band camera to acquire multispectral images at seven view zenith angles (VZAs) (0°, ± 20°, ± 40° and ±60°) for three critical growth stages of winter wheat. Four representative vegetation indices encompassing the Visible Atmospherically Resistant Index (VARI), Red edge Chlorophyll Index (CIred-edge), Green band Chlorophyll Index (CIgreen), Modified Normalized Difference Vegetation Index with a blue band (mNDblue) were derived from the multi-angular images. They were used to estimate the N nutrition status in leaf nitrogen concentration (LNC), plant nitrogen concentration (PNC), leaf nitrogen accumulation (LNA), and plant nitrogen accumulation (PNA) of wheat canopies for a combination of treatments in N rate, variety and planting density. The results demonstrated that the highest accuracy for single-angle images was obtained with CIgreen for LNC from a VZA of -60° (R2 = 0.71, RMSE = 0.34%) and PNC from a VZA of -40° (R2 = 0.36, RMSE = 0.29%). When combining an off-nadir image (-40°) and the 0° image, the accuracy of PNC estimation was substantially improved (CIred-edge: R2 = 0.52, RMSE = 0.28%). However, the use of dual-angle images did not significantly increase the estimation accuracy for LNA and PNA compared to the use of single-angle images. Our findings suggest that it is important and practical to use oblique images from a UAV-based multispectral camera for better estimation of nitrogen concentration in wheat leaves or plants. The oblique images acquired from additional flights could be used alone or combined with the nadir-view images for improved crop N status monitoring.
RESUMO
Crop density is a key agronomical trait used to manage wheat crops and estimate yield. Visual counting of plants in the field is currently the most common method used. However, it is tedious and time consuming. The main objective of this work is to develop a machine vision based method to automate the density survey of wheat at early stages. RGB images taken with a high resolution RGB camera are classified to identify the green pixels corresponding to the plants. Crop rows are extracted and the connected components (objects) are identified. A neural network is then trained to estimate the number of plants in the objects using the object features. The method was evaluated over three experiments showing contrasted conditions with sowing densities ranging from 100 to 600 seedsâ m-2. Results demonstrate that the density is accurately estimated with an average relative error of 12%. The pipeline developed here provides an efficient and accurate estimate of wheat plant density at early stages.
RESUMO
BACKGROUND: Plant density and its non-uniformity drive the competition among plants as well as with weeds. They need thus to be estimated with small uncertainties accuracy. An optimal sampling method is proposed to estimate the plant density in wheat crops from plant counting and reach a given precision. RESULTS: Three experiments were conducted in 2014 resulting in 14 plots across varied sowing density, cultivars and environmental conditions. The coordinates of the plants along the row were measured over RGB high resolution images taken from the ground level. Results show that the spacing between consecutive plants along the row direction are independent and follow a gamma distribution under the varied conditions experienced. A gamma count model was then derived to define the optimal sample size required to estimate plant density for a given precision. Results suggest that measuring the length of segments containing 90 plants will achieve a precision better than 10%, independently from the plant density. This approach appears more efficient than the usual method based on fixed length segments where the number of plants are counted: the optimal length for a given precision on the density estimation will depend on the actual plant density. The gamma count model parameters may also be used to quantify the heterogeneity of plant spacing along the row by exploiting the variability between replicated samples. Results show that to achieve a 10% precision on the estimates of the 2 parameters of the gamma model, 200 elementary samples corresponding to the spacing between 2 consecutive plants should be measured. CONCLUSIONS: This method provides an optimal sampling strategy to estimate the plant density and quantify the plant spacing heterogeneity along the row.
RESUMO
Dew forming on plant leaves through water condensation plays a significant ecological role in arid and semi-arid areas as an ignorable fraction of water resources. In this study, an artificial intelligent climate chamber and an automatic temperature-control system for leaves were implemented to regulate the ambient temperature, the leaf surface temperature and the leaf inclination for dew formation. The impact of leaf inclination, ambient temperature and dew point-leaf temperature depression on the rate and quantity of dew accumulation on leaf surface were analyzed. The results indicated that the accumulation rate and the maximum volume of dew on leaves decreased with increasing the leaf inclination while increased with the increment of dew point-leaf temperature depression, ambient temperature and relative humidity. Under the horizontal configuration, dew accumulated linearly on leaf surface over time until the maximum volume (0.80 mm) was reached. However, dew would fall down after reaching the maximum volume when the leaf inclination existed (45 degrees or 90 degrees), significantly slowing down the accumulative rate, and the zigzag pattern for the dynamic of dew accumulation appeared.