Non-destructive Raman Method Development for Quantifying Active Pharmaceutical Ingredient in an Oral Suspension Through Plastic Dosing Syringes.

For liquid drug products, e.g., solutions or suspensions for oral or parenteral dosing, stability needs to be demonstrated in primary packaging during storage and in dosing devices during in-use periods per quality guidelines from the International Conference on Harmonisation (ICH) and the European Agency for the Evaluation of Medicinal Products (EMEA). One aspect of stability testing for liquid drug products is in-use stability, which typically includes transferring the liquid samples into another container for further sample preparation with extraction diluent and necessary agitation. Samples are then analyzed with traditional chromatography methods, which are laborious, prone to human errors, and time-consuming, especially when this process needs to be repeated multiple times during storage and in-use periods. Being able to analyze the liquid samples non-destructively would significantly improve testing efficiency. We investigated different Raman techniques, including transmission Raman (TRS) and back scatter Raman with a non-contact optic (NCO) probe, as alternative non-destructive tools to the UHPLC method for API quantitation in in-use liquid samples pulled into plastic dosing syringes. The linearity of the chemometric methods for these two techniques was demonstrated by cross-validation sample sets at three levels over an API concentration range of 60 to 80 mg/mL. The accuracy of the chemometric models was demonstrated by the accurate prediction of the API concentrations in independent samples from four different pilot plant batches manufactured at different sites. Both techniques were successful in measuring a signal through a plastic oral dosing syringe, and predicting the suspension API concentration to within 4% of the UHPLC-measured value. For future work, there are opportunities to improve the methodology by exploring additional probes or to expand the range of applications by using different sample presentations (such as prefilled syringes) or formulation matrices for solutions and suspensions.

Adenosquamous carcinoma of the liver: The challenge of diagnosis.

Adenosquamous carcinoma of the liver is extremely rare. We report a case of adenosquamous carcinoma in the intrahepatic bile duct of a 56-year-old woman who complained of persistent abdominal pain, shivering and hyperthermia. Computed tomography demonstrated a solid-cystic neoplasm in segment 5/6/8 of the liver with a gradual enhancement pattern in the solid area. However, postoperative pathological examination showed adenosquamous carcinoma of intrahepatic bile duct.

A Non-destructive Quantitative Transmission Raman Spectroscopy Method for Active Pharmaceutical Ingredient in Drug Product In-Use Samples Prepared in Dosing Vehicles.

Compatibility and in-use stability screening studies are required for dosing vehicle selection based on the FDA's guidance, "Use of Liquids and/or Soft Foods as Vehicles for Drug Administration: General Considerations for Selection and In Vitro Methods for Product Quality Assessments." One of the major analytical challenges in these studies is sample preparation because extracting active pharmaceutical ingredient (API) from the drug product mixed into viscous soft-food matrices (e.g., yogurt or apple sauce) is laborious, prone to human errors, and time-consuming. Additionally, observed in-solution degradation caused by dosing vehicle ingredients causes analytical error. In our study, NIR- and Raman-based non-destructive tests have been explored and developed with drug product powder formulation prepared in dosing vehicles. A transmission Raman chemometrics model was developed and calibrated with samples varying in API content, water content, and milled extrudate particle size distribution. The method was proven to be accurate, linear, selective, and robust. Our work with non-destructive tests eases the laboratory burdens to perform in-use stability studies with dosing vehicles for all phases of development that need to cover all application scenarios of clinical preparation and usage.

Oral Drug Product Administration via Enteral Feeding Tubes: In Vitro Testing.

Medication administration via enteral feeding tubes (EFT) is a necessary practice for patients unable to swallow oral dosage forms due to a medical condition or treatment that affects the ability to swallow or the function of the gastrointestinal tract. Off-label administration of oral drug products via EFT raises concerns for pharmaceutical sponsors, regulators, and healthcare practitioners (HCPs) because of the potential risks this practice introduces to both the patient and the caregiver. These risks can be mitigated by generating data-supported instructions that patients and HCPs can use to ensure safe and accurate administration of oral drug products via EFT. This commentary presents an industry perspective on the testing that should be conducted to enable development of product-specific instructions in the labeling to support or advise against administration of oral drug products via enteral feeding tube. The proposal outlined in this commentary takes a risk-based approach, addressing recommendations from both regulatory agencies as well as considerations for expanding this testing to address needs specific to neonatal and pediatric populations.

In vivo delivery of nucleic acids via glycopolymer vehicles affords therapeutic infarct size reduction in vivo.

Using a new class of nontoxic and degradable glycopolymer-based vehicles termed poly(glycoamidoamine)s, we demonstrate virus-like delivery efficacy of oligodeoxynucleotide (ODN) decoys to cardiomyoblasts (H9c2), primary cardiomyocytes, and the mouse heart. These glycopolymers bind and compact ODN decoys into nanoparticle complexes that are internalized by the cell membrane and mediate nuclear uptake of DNA in 90+% of cultured primary cardiomyocytes and 87% of the mouse myocardium. Experimental results reveal that decoys delivered via these glycopolymers block the activation of the transcription factor NF-κB, a major contributor to ischemia/reperfusion injury. Decoy complexes formed with glycopolymer T4 significantly blocked downstream gene expression of Cox-2 and limited myocardial infarction in vivo, phenocopying a transgenic mouse model. These promising delivery vehicles may facilitate high-throughput genetic approaches in animal models. Additionally, the low toxicity, biodegradation, and outstanding delivery efficacy suggest that these nanomedicines may be clinically applicable for gene regulatory therapy.

A microdosing framework for absolute bioavailability assessment of poorly soluble drugs: A case study on cold-labeled venetoclax, from chemistry to the clinic.

This work presents an end-to-end approach for assessing the absolute bioavailability of highly hydrophobic, poorly water-soluble compounds that exhibit high nonspecific binding using venetoclax as a model drug. The approach utilizes a stable labeled i.v. microdose and requires fewer resources compared with traditional approaches that use radioactive 14 C-labeled compounds. The stable labeled venetoclax and internal standard were synthesized, then an i.v. formulation was developed. In the clinical study, female subjects received a single oral dose of venetoclax 100 mg followed by a 100-µg i.v. dose of cold-labeled 13 C-venetoclax at the oral time of maximum concentration (Tmax ). The i.v. microdose was prepared as an extemporaneous, sterile compounded solution on the dosing day by pharmacists at the clinical site. Several measures were taken to ensure the sterility and safety of the i.v. preparation. A sensitive liquid chromatography-tandem mass spectrometry method was developed to allow the detection of plasma levels from the i.v. microdose. Plasma samples were collected through 72 h, and pharmacokinetic parameters were estimated using noncompartmental methods. Postdosing sample analysis demonstrated the consistency of the preparations and allowed the precise calculation of the pharmacokinetic parameters based on the actual injected dose. The absolute bioavailability of venetoclax was estimated at 5.4% under fasting conditions. Venetoclax extraction ratio was estimated to be 0.06 suggesting that the fraction transferred from the enterocytes into the liver is limiting venetoclax bioavailability. The proposed framework can be applied to other highly hydrophobic, poorly water-soluble compounds that exhibit high nonspecific binding to support the understanding of their absorption and disposition mechanisms and guide formulation development.

Degradation of poly(glycoamidoamine) DNA delivery vehicles: polyamide hydrolysis at physiological conditions promotes DNA release.

Poly(glycoamidoamine)s (PGAAs) are a group of efficient and degradable gene delivery vehicles that consist of three main functionalities: carbohydrate groups, secondary amines, and amide bonds. Herein, we have created nonhydroxylated models to these structures by polymerizing oxylate, succinate, or adipate groups with pentaethylenehexamine. The resulting polymers (named O4, S4, and A4, respectively) were created to understand how the absence of hydroxyl groups and changes in the amide bond spacing affect polymer degradation, plasmid DNA (pDNA) complexation, toxicity, and transfection efficiency in vitro. An additional model was also created that retains a galactaramide unit, but we have replaced the secondary amines with ethyleneoxide units (GO2) to understand the effects of the amine groups on polymer degradation. We have found that the secondary amines and hydroxyls are necessary to facilitate rapid degradation of these polymers, and analogues lacking hydroxyls or amines did not degrade over the time course of the study. Through electron-withdrawing and hydrogen bonding, the hydroxyls appear to activate the carbonyls of the amide bond to hydrolysis via an inductive electron withdrawing effect. Through titration experiments, PGAA degradation appears not to affect the polymer buffering capacity. Furthermore, we have found that PGAA degradation may enhance gene expression by releasing pDNA from polyplexes (polymer-pDNA complexes) and, thus, exposing it to undergo transcription and translation. The difference in the optimal pH that promotes degradation of the PGAAs and the hydroxyl-free analogues may prove to be a useful means to achieve pH-regulated DNA release from polyplexes by specifically modulating the chemical structures.

Transmission Raman Spectroscopic Quantification of Active Pharmaceutical Ingredient in Coated Tablets of Hot-Melt Extruded Amorphous Solid Dispersion.

Transmission Raman spectroscopy is an emerging technique, capable of quantitative analysis of drug products nondestructively using a multivariate data analysis approach. We developed and validated a chemometric method to quantify the active pharmaceutical ingredient in coated tablets of hot-melt extruded amorphous solid dispersion. A partial least squares regression (PLSR) model was developed and validated based on transmission Raman spectra data collected from coated tablet samples with variations in the content of active pharmaceutical ingredient, excipients, water content, a key oxidative degradant, milled extrudate particle size distribution, and tablet hardness. The method was proven to be accurate, linear, specific, and robust. Our work demonstrates that transmission Raman spectroscopy (TRS) is a viable, cost-effective, secondary method to high-performance liquid chromatography (HPLC) for quantitation of active pharmaceutical ingredient (API) in coated tablets of hot-melt extruded amorphous solid dispersion.

Effects of trehalose click polymer length on pDNA complex stability and delivery efficacy.

Cationic polymers are currently being studied as non-viral vectors to deliver therapeutic DNA into cells. In this study, a series of trehalose-based glycopolymers containing four secondary amines in the repeat unit were synthesized via the 'click reaction' [degrees of polymerization (n(w))=35, 53, 75, or 100] to elucidate how the polymer length affects the bioactivity. The four structures bound and charge-neutralized pDNA with similar affinity that was independent of the length, as determined through gel electrophoresis, heparin competitive displacement, and isothermal titration calorimetric assays. Dynamic light scattering measurements revealed that the polyplexes formed with the longer polymers (n(w)=53, 75, or 100) inhibited flocculation in media containing serum, whereas the polyplexes formed with the shorter polymer (n(w)=35) aggregated rapidly. Similar results were observed via transmission electron microscopy studies, where the nanoparticles formed with the polymers having longer degrees of polymerization showed discrete particles in media containing 10% serum. Transfection experiments revealed that the polymers exhibited low cytotoxicity at low N/P ratios and could facilitate high cellular uptake and gene expression in HeLa and H9c2(2-1) cells, and the results were dependent on the degrees of polymerization (longer polymers yielded higher transfection and toxicity).

[Effect of dihydroartemisinin on ultrastructure of Giardia lamblia in vitro].

OBJECTIVE: To study the in vitro effect of dihydroartemisinin (DHA) on Giardia lamblia. METHODS: Trophozoites of G. lamblia were cultivated with modified TYI-S-33 medium that contains dihydroartemisinin (DHA). The trophozoites were morphologically observed respectively with light and electron microscopes after treated with the drug. RESULTS: The mortality increased with the prolongation of the time of the drug action and the increase of drug concentration (P<0.01). While at the same concentration of 100 microg/ml, the mortality increased from 46.6% for 12 h to 100% for 24 h (P<0.05). For 12 h, the mortality of G. lamblia was from 46.6% at concentration of 100 microg/ml to 100% at 200microg/ml. Under optical microscope, deformation and swelling of the parasites were observed when treated with DHA for 12, 24 and 48 h. Movement of the flagella became slow or stopped. Under electron microscope, the trophozoites were swollen and deformed, vacuoles were seen in the cytoplasm, and the cell membrane ruptured and fell off. The cytoplasm protrusions appeared on the surface of the plasma membrane. The adhesive disc changed into large bubbles and the perinuclear space became wider and the deformed nucleus was seen. CONCLUSION: DHA shows a strong impairment on the plasma membrane and cytoskeleton of Giardia lamblia.

Glucose-Based Poly(ester amines): Synthesis, Degradation, and Biological Delivery.

Herein, the synthesis and characterization of two glucose-based degradable poly(ester amines), GluN3 and GluN4, are described. Data from gel shift assays, PicoGreen dye exclusion, and dynamic light scattering studies reveals that these polycations can form polyplexes with plasmid DNA at a relatively low N/P ratio and that the polymers degrade rapidly at physiological pH conditions. Assessment of in vitro data via flow cytometry and live cell fluorescence microscopy indicated that GluN3 and GluN4 polyplexes can be internalized by HeLa cells in a highly effective manner with low cytotoxicity profiles.

Cationic lipids percentage and processing temperature are critical in designing siRNA lipid nanoparticles.

To design a clinically viable small interfering RNA (siRNA) formulation, it is essential to understand the in vivo siRNA delivery mechanism during the product development. However, majority of reported siRNA delivery studies are based on testing only isolated factors, with ambiguous interpretation of often in vitro transfection results. Correlating physicochemical properties with in vivo transfection efficiency thus represents an important step towards rational design of siRNA delivery systems. In this study, design of experiments studies were applied to probe formulation attributes and process parameters, with in vivo activities evaluated as a primary response along with physicochemical properties. Statistical analysis was performed to identify the significance of each input factor towards the in vivo transfection efficiency using a Positive Readout System. The interactions between these factors were also analyzed. Our results indicated that among the formulation factors evaluated, the percentage of cationic lipid is of most significant effect. During the process, temperature stands out as the most significant factor impacting the in vivo activities. These results shed light on our design of siRNA lipid nanoparticle formulations in the early development stage.

DNA delivery in vitro via surface release from multilayer assemblies with poly(glycoamidoamine)s.

Localized controlled release of nucleic acid therapeutics could be an effective way to reduce the extracellular barriers associated with systemic delivery. Herein, we have used the layer-by-layer film deposition approach to construct ultrathin multilayer assemblies for in vitro controlled release of plasmid DNA (pDNA). Layer-by-layer assemblies containing alternate layers of cationic poly(l-tartaramidopentaethylenetetramine) (T4), and anionic pDNA were fabricated. The film thickness and the absorbance at 260 nm for different T4/pDNA multilayer assemblies were characterized by ellipsometry and UV-vis spectrophotometry, respectively. The results indicated an increased loading capacity of pDNA with respect to an increase in the number of T4/pDNA bilayers deposited. For the controlled-release studies we incubated the bilayers coated on quartz slides in phosphate-buffered saline (PBS) at 37 degrees C and collected the media at different incubation time points. The collected PBS samples were characterized for pDNA release by complexing solutions containing the released pDNA with Lipofectamine 2000 and following cellular pDNA uptake via flow cytometry and GFP gene expression assays with HeLa cells. The study showed that the multilayer films started to release pDNA after 1 day of incubation and increased after 7 days of incubation. Assays monitoring green fluorescent protein (GFP) expression in HeLa cells indicated that about 20% of the cells were positive for GFP expression at all sample time points up to 11 days. Although an increase in cells positive for Cy5-pDNA was found as the incubation time increased, the number of cells positive for GFP expression remained constant over the same time frame.

General structure-activity relationship for poly(glycoamidoamine)s: the effect of amine density on cytotoxicity and DNA delivery efficiency.

Herein, two new series of poly(glycoamidoamine)s (branched and linear) have been synthesized by polycondensation. The polymer repeat units have been designed to contain D-glucaramide, meso-galactaramide, D-mannaramide, or L-tartaramide structures and five or six ethyleneamine units to investigate the amine density effects on the bioactivity as compared to a similar series of poly(glycoamidoamine)s previously described that contain four ethyleneamines. These delivery vehicles were created to examine the effects that the number of secondary amines in the polymer repeat unit and the polymer structure (branched and linear) have on plasmid DNA (pDNA) binding affinity, polyplex formation, cell viability, and gene expression in the absence and presence of serum in the culture medium. The results reveal that the new polymers with higher amine density in the repeat unit do not significantly enhance the transfection efficiency compared to that of previous models containing four ethyleneamines, but an increase in cytotoxicity is noticed. Linear polymers reveal higher pDNA neutralization efficacy, gene expression, and toxicity than the branched versions containing a similar chemical structure, which may be caused by a higher protonation of the amine groups. With these new vectors, some interesting trends emerged. The galactaramide and tartaramide analogues revealed higher delivery efficiency than the glucaramide and mannaramide structures. In addition, the branched and linear structures containing five ethyleneamines in the repeat unit formed polyplexes at higher N/P ratios, which had lower zeta potential and lower delivery efficacy than the analogues with six ethyleneamines, and also the linear structures generally revealed higher delivery efficiency and toxicity when compared to those of their branched analogues.

Poly(glycoamidoamine)s for gene delivery. structural effects on cellular internalization, buffering capacity, and gene expression.

The study of polymeric nucleic acid delivery vehicles has recently grown because of their promise for many biomedical applications. In an effort to understand how the chemical traits of polymers affect the biological mechanisms of nucleic acid delivery, we have calculated the buffering capacity in the physiological pH range of a series of 10 poly(glycoamidoamine)s with systematic structural variations in the amine stoichiometry (from 1 to 4), carbohydrate moiety (d-glucarate or l-tartarate), and amine spacer (ethylene or butylene) within their repeat units. In addition, we have compared the buffering capacity of these polymeric vectors to their polyplex (polymer-DNA complex) stability, cellular internalization, and gene expression profiles to understand the parameters that are important for increasing gene delivery efficiency. The results indicate that the buffering capacity is not always the primary characteristic that determines the gene delivery efficiency for all the poly(glycoamidoamine)s. We have found that the buffering capacity may affect the gene delivery efficiency only when analogous structures containing the same number of amines but different carbohydrates are compared. We reveal that the cellular internalization is the key step in the gene delivery process with systems containing different amine stoichiometry. Also, increasing the number of methylene groups between the secondary amines increases toxicity to a large degree. This systematic and heuristic approach of studying the correlations between structural variables and gene delivery efficiency will facilitate the development of effective synthetic vectors for specific nucleic acid delivery applications.

Poly(glycoamidoamine)s for gene delivery: stability of polyplexes and efficacy with cardiomyoblast cells.

Polymeric vectors have potential as nucleic acid delivery vehicles for novel gene therapy and oligonucleotide treatments for cardiovascular disease. In this report, poly(glycoamidoamine)s that contain four secondary amines and either two or four hydroxyl units in the repeat unit with D-glucarate (D4), meso-galactarate (G4), D-mannarate (M4), and l-tartarate (T4) stereochemistry have been investigated for their pDNA-binding affinity, DNase protection effect, and polyplex stability in the presence of salt and serum. Also, the luciferase gene delivery and cellular internalization of polyplexes formed with these polymers have been investigated with rat cardiomyoblast [H9c2(2-1)] cells. The results demonstrate that the number of hydroxyl groups and the stereochemistry affect the biological properties. Polymers T4 and G4 have higher pDNA binding affinity, protect pDNA from nuclease degradation, and do not release pDNA in the presence of serum. Polymers D4 and M4 bind pDNA with lower affinity, which allows for some pDNA degradation and release in the presence of serum. Although T4 forms the most stable polyplexes, vector G4 reveals the highest luciferase gene expression in serum-free media and the greatest cellular internalization of fluorescein-labeled pDNA both in serum-free and serum-supplemented media. The results of these studies indicate that the polymer-DNA binding affinity, nuclease protection capability, and polyplex stability are important parameters to facilitate effective pDNA delivery with poly(glycoamidoamine)s in cultured cardiomyoblast cells. The carbohydrate type also plays an important role to increase cellular uptake and gene expression where the polymer with the galactarate stereochemistry (in G4) is found to be the most effective vector for pDNA delivery to cardiomyoblast cells in vitro.

Trehalose click polymers inhibit nanoparticle aggregation and promote pDNA delivery in serum.

Herein, three new glycopolymers have been synthesized via "click polymerization" to promote nucleic acid delivery in the presence of biological media containing serum. These structures were designed to contain a trehalose moiety to promote biocompatibility, water solubility, and stability against aggregation, amide-triazole groups to enhance DNA binding affinity, and an oligoamine unit to facilitate DNA encapsulation, phosphate neutralization, and interactions with cell surfaces. A 2,3,4,2',3',4'-hexa-O-acetyl-6,6'-diazido-6,6'-dideoxy-D-trehalose (4) monomer was polymerized via copper(I)-catalyzed azide-alkyne cycloaddition with a series of dialkyne-amide comonomers that contain either one, two, or three Boc-protected secondary amines (7a, 7b, or 7c, respectively). After deprotection, three water-soluble polycations (9a, 9b, or 9c) were obtained with similar degrees of polymerization (n = 56-61) to elucidate the role of amine number on nucleic acid binding, complex formation, stability, and cellular delivery. Gel electrophoresis and ethidium bromide experiments showed that 9a-9c associated with plasmid DNA (pDNA) and formed complexes (polyplexes) at N/P ratios dependent on the amine number. TEM experiments revealed that 9a-9c polyplexes were small (50-120 nm) and had morphologies (spherical and rodlike) associated with the polymer chain stiffness. Dynamic light scattering studies in the presence of media containing serum demonstrated that 9c polyplexes had a low degree of flocculation, whereas 9a and 9b polyplexesd aggregate rapidly. Further biological studies revealed that these structures were biocompatible and deliver pDNA into HeLa cells. Particularly, 9c polyplexes promoted high delivery efficacy and gene expression profiles in the presence of serum.

Hydroxyl stereochemistry and amine number within poly(glycoamidoamine)s affect intracellular DNA delivery.

Nucleic acid drugs have great potential to treat many devastating aliments, but their application has been hindered by the lack of efficacious and nontoxic delivery vehicles. Here, a new library of poly(glycoamidoamine)s (D1-D4, G1-G4, and M1-M4) has been synthesized by polycondensation of esterified d-glucaric acid (D), dimethyl-meso-galactarate (G), and d-mannaro-1,4:6,3-dilactone (M) with diethylenetriamine (1), triethylenetetramine (2), tetraethylenepentamine (3), and pentaethylenehexamine (4). The stereochemistry of the carbohydrate hydroxyl groups and the number of amine units have been systematically changed in an effort to examine how the polymer chemistry affects the plasmid DNA (pDNA) binding affinity, the compaction of pDNA into nanoparticles (polyplexes), the material cytotoxicity, and the efficacy of nucleic acid delivery. The polymers with four secondary amines (D4, G4, and M4) between the carbohydrates were found to have the highest pDNA binding affinity and the galactarate polymers generally yielded the smallest polyplexes. Delivery studies with pDNA containing the firefly luciferase or beta-galactosidase reporter genes in BHK-21, HeLa, and HepG2 cells demonstrated that all of the poly(glycoamidoamine)s deliver pDNA without cytotoxicity. Polymers D4, G4, and M4 displayed the highest delivery efficiency, where G4 was found to be a particularly effective delivery vehicle. Heparin competition assays indicated that this may be a result of the higher pDNA binding affinity displayed by G4 as compared to D4 and M4. Polyplexes formed by polymers with weaker pDNA affinities may dissociate at the cell surface due to interactions with negatively charged glycosaminoglycans, which would cause a decrease in the number of polyplexes that are endocytosed.

New poly(d-glucaramidoamine)s induce DNA nanoparticle formation and efficient gene delivery into mammalian cells.

In this report, four new poly(d-glucaramidoamine)s (1-4) have been designed to lower the toxicity of conventional polymeric nucleic acid delivery vehicles by incorporating a carbohydrate comonomer within a polyethylenimine (PEI)-like backbone. Polymers 1-4 were synthesized via polycondensation of esterified d-glucaric acid and four different amine-containing comonomers [diethylenetriamine (1), triethylenetetramine (2), tetraethylenepentamine (3), and pentaethylenehexamine (4)] in methanol. Viscometry and NMR studies suggest that the polymers are mostly linear (for 1-4, the alpha value in the Mark-Houwink-Sakurada equation = 0.6-0.7), thus indicating that polymerization occurs predominantly through the primary amines with a low degree of branching off the secondary amines. Results of gel electrophoresis shift assays show that polymers 1-4 bind pDNA at N/P ratios of 5, 3, 2, and 2, respectively. Also, dynamic light scattering and TEM experiments indicate that 1-4 compact DNA into nanoparticles (polyplexes) between 140 and 440 nm at an N/P ratio of 30. Furthermore, polyplexes formed with 1-4 deliver pDNA (plasmid DNA) containing the firefly luciferase reporter gene to BHK-21 cells in a nontoxic and highly efficient manner (as determined by luciferase gene expression). In particular, polymer 4 reveals very high delivery efficiency (equivalent to linear PEI). This result may be due in part to the "proton sponge" hypothesis proposed by Behr et al. Polymers containing amines that are protonated in the endosomal pH range (between about 7.4-5.0) reveal enhanced gene delivery profiles.