Cellulose Nanofiber-Based Triboelectric Nanogenerators for Efficient Air Filtration in Harsh Environments.

Advanced portable healthcare devices with high efficiencies, small pressure drops, and high-temperature resistance are urgently desired in harsh environments with high temperatures, high humidities, and high levels of atmospheric pollution. Triboelectric nanogenerators (TENGs), which serve as energy converters in a revolutionary self-powered sensor device, present a sustainable solution for meeting these requirements. In this work, we developed a porous negative triboelectric material by synthesizing ZIF-8 on the surface of a cellulose/graphene oxide aerogel, grafting it with trimethoxy(1H,1H,2H,2H-heptadecafluorodecyl)silane, and adding a negative corona treatment, and it was combined with a positive triboelectric material to create a cellulose nanofiber-based TENG self-powered filter. The devices achieved a balance between a small pressure drop (53 Pa) and high filtration efficiency (98.97%, 99.65%, and 99.93% for PM0.3, PM0.5, and PM1, respectively), demonstrating robust filtration properties at high temperatures and high humidities. Our work provides a new approach for developing self-powered wearable healthcare devices with excellent air filtration properties.

Purification of Polysaccharide Produced by the Haploid Yeast Strain of Tremella sanguinea and Its Antioxidant and Prebiotic Activities.

Tremella sanguinea is a traditional Chinese medicinal and edible mushroom. Polysaccharides from Tremella mushrooms have received increasing amounts of research attention due to their diverse pharmacological activities. In this study, via the incubation of basidiospores collected from fresh artificially cultivated basidiocarps of T. sanguinea, a haploid yeast strain of T. sanguinea was obtained, and it was found to be a typical loose-slime-forming yeast capable of producing a large amount of exopolysaccharides (EPS). Using DEAE-52 cellulose column chromatography and Sephadex G-100 gel permeation chromatography, the major polysaccharide, named TSPS-1, was separated and purified from the EPS produced by the haploid yeast strain of T. sanguinea. TSPS-1 was a homogeneous polysaccharide with a molecular weight of 2.5 × 103 kDa and consisted of rhamnose, glucose, xylose, mannose and glucuronic acid at a molar ratio of 1: 0.7: 62.2: 24.6: 11.5. The bioactivity of the TSPS-1 polysaccharide was evaluated. The results show that TSPS-1 exhibited noticeable antioxidant activity by scavenging hydroxyl radicals (EC50 = 1.92 mg/mL) and superoxide radicals (EC50 = 1.33 mg/mL), and prebiotic activity by promoting the growth of different probiotic strains in the genus Lactobacillus and Bifidobacterium. These results suggest that the cultivation of the haploid yeast strain can be a promising alternative for the efficient production of valuable T. sanguinea polysaccharides with antioxidant and prebiotic potential.

An electrostatically spun cellulose-based self-powered mask with high efficiency air filtration and ammonia sensing.

On construction sites impacted by particulate matter and hazardous gases, portable integrated air filtration equipment with high efficiency, minimal pressure drops and ammonia (NH3) alarms is critical. Triboelectric nanogenerators (TENG) present a sustainable solution by generating self-powered electricity to fulfill these requirements. In this study, we synthesized zeolitic imidazolate framework-8 (ZIF-8) in situ on the surface of titanium carbide (Ti3C2Tx) to create Ti3C2Tx/ZIF-8, grafted it onto cellulose diacetate via tetraethyl orthosilicate, and ultimately developed a cellulose-based nanofibrous membrane through electrospinning, combining it with a negative triboelectric material to construct a self-powered TENG-based mask. The device achieved a balance between a low pressure drop (61 Pa) and high filtration efficiency (99.21 %, 99.71 %, and 99.98 % for PM0.3, PM0.5, and PM1, respectively). Furthermore, the device responds swiftly to NH3; at a concentration of 100 ppm NH3, it achieves a rapid response rate of 83 %, with a response/recovery time as low as 12/14 s. Notably, the device retains its rapid sterilization capability within a short duration (20 min) and demonstrates remarkable stability across its various performance metrics, even after multiple washes. This study presents a novel approach to the development of multi-use, self-powered wearable devices featuring excellent air filtration performance and NH3 detection capabilities.

Cyanobacterial VOCs ß-ionone and ß-cyclocitral poisoning Lemna turionifera by triggering programmed cell death.

ß-Ionone and ß-cyclocitral are two typical components in cyanobacterial volatiles, which can poison aquatic plants and even cause death. To reveal the toxic mechanisms of the two compounds on aquatic plants through programmed cell death (PCD), the photosynthetic capacities, caspase-3-like activity, DNA fragmentation and ladders, as well as expression of the genes associated with PCD in Lemna turionifera were investigated in exposure to ß-ionone (0.2 mM) and ß-cyclocitral (0.4 mM) at lethal concentration. With prolonging the treatment time, L. turionifera fronds gradually died, and photosynthetic capacities gradually reduced and even disappeared at the 96th h. This demonstrated that the death process might be a PCD rather than a necrosis, due to the gradual loss of physiological activities. When L. turionifera underwent the death, caspase-3-like was activated after 3 h, and reached to the strongest activity at the 24th h. TUNEL-positive nuclei were detected after 12 h, and appeared in large numbers at the 48th h. The DNA was cleaved by Ca2+-dependent endonucleases and showed obviously ladders. In addition, the expression of 5 genes (TSPO, ERN1, CTSB, CYC, and ATR) positively related with PCD initiation was up-regulated, while the expression of 2 genes (RRM2 and TUBA) negatively related with PCD initiation was down-regulated. Therefore, ß-ionone and ß-cyclocitral can poison L. turionifera by adjusting related gene expression to trigger PCD.

High expression of NXPH4 correlates with poor prognosis, metabolic reprogramming, and immune infiltration in colon adenocarcinoma.

Background: Colon adenocarcinoma (COAD) is a prevalent gastrointestinal malignant disease with high mortality rate, and identification of novel prognostic biomarkers and therapeutic targets is urgently needed. Although neurexophilin 4 (NXPH4) has been investigated in several tumors, its role in COAD remains unclear. The aim of this study was to explore the prognostic value and potential functions of NXPH4 in COAD. Methods: The expression of NXPH4 in COAD were analyzed using The Cancer Genome Atlas (TCGA) and datasets from the Gene Expression Omnibus (GEO) database. The prognostic value of NXPH4 was determined using Kaplan-Meier analysis and Cox regression analysis. To investigate the possible mechanism underlying the role of NXPH4 in COAD, Gene Ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG), and gene set enrichment analysis (GSEA) were employed. The correlation between NXPH4 expression and immune cell infiltration levels was examined thorough single-sample gene set enrichment analysis (ssGSEA). Furthermore, the competing endogenous RNA (ceRNA) regulatory network that may be involved in NXPH4 in COAD was predicted and constructed through a variety of databases. Results: NXPH4 expression was significantly higher in COAD tissue compared with normal colon tissues. Meanwhile, high expression of NXPH4 was associated with poor prognosis in COAD patients. GO-KEGG and GSEA analyses indicated that NXPH4 was associated with glycolysis and hypoxia pathway, and may promote COAD progression and metastasis by modulating metabolic reprogramming. ssGSEA analysis demonstrated that NXPH4 expression also associated with immune infiltration. Furthermore, we identified various microRNAs (miRNAs) and long noncoding RNAs (lncRNAs) as upstream regulators of NXPH4 in COAD. Conclusions: The present study revealed that high expression of NXPH4 is associated with tumor progression, metabolic reprogramming, and immune infiltration. These findings suggest that NXPH4 could serve as a reliable prognostic biomarker and a promising therapeutic target in COAD.

Current status of research on polysaccharide-based functional gradient gel materials: A review.

Functional gradient materials with material property anisotropy are one of the hotspots of current new material research. The gradient change of material properties comes from the change of the content of one or more components in the material, which is closely related to the preparation process of the material. Meanwhile, polysaccharide materials, as an environmentally friendly and green material, have attracted extensive attention from researchers. This paper focuses on the preparation process of functional gradient gel materials based on polysaccharides, analyzes the laws affecting the distribution of substances during the molding process from the basic principles of material molding, and clarifies the advantages and disadvantages of various methods, so as to promote the innovation of the theory of the preparation method of functional gradient gel materials. At the same time, the specific applications that can be realized by the gradient materials are introduced and compared with the traditional homogeneous materials to elucidate the enhancement of the usage properties brought by their unique gradient structure or properties, which will play a certain role as a reference for the direction of the application of the subsequent materials.

A comprehensive review on preparation and functional application of the wood aerogel with natural cellulose framework.

As the traditional aerogel has defects such as poor mechanical properties, complicated preparation process, high energy consumption and non-renewable, wood aerogel as a new generation of aerogel shows unique advantages. With a natural cellulose framework, wood aerogel is a novel nano-porous material exhibiting exceptional properties such as light weight, high porosity, large specific surface area, and low thermal conductivity. Furthermore, its adaptability to further functionalization enables versatile applications across diverse fields. Driven by the imperative for sustainable development, wood aerogel as a renewable and eco-friendly material, has garnered significant attention from researchers. This review introduces preparation methods of wood aerogel based on the top-down strategy and analyzes the factors influencing their key properties intending to obtain wood aerogels with desirable properties. Avenues for realizing its functionality are also explored, and research progress across various domains are surveyed, including oil-water separation, conductivity and energy storage, as well as photothermal conversion. Finally, potential challenges associated with wood aerogel exploitation and utilization are addressed, alongside discussions on future prospects and research directions. The results emphasize the broad research value and future prospects of wood aerogels, which are poised to drive high-value utilization of wood and foster the development of green multifunctional aerogels.

Application progress of nanocellulose in food packaging: A review.

With the increasing environmental and ecological problems caused by petroleum-based packaging materials, the focus has gradually shifted to natural resources for the preparation of functional food packaging materials. In addition to biodegradable properties, nanocellulose (NC) mechanical properties, and rich surface chemistry are also fascinating and desired to be one of the most probable green packaging materials. In this review, we firstly introduce the recent progress of novel applications of NC in food packaging, including intelligent packaging, nano(bio)sensors, and nano-paper; secondly, we focus on the modification techniques of NC to summarize the properties (antimicrobial, mechanical, hydrophobic, antioxidant, and so on) that are required for food packaging, to expand the new synthetic methods and application areas. After presenting all the latest advances related to material design and sustainable applications, an overview summarizing the safety of NC is presented to promote a continuous and healthy movement of NC toward the field of truly sustainable packaging.

Characterization and Efficacy of a Nanomedical Radiopharmaceutical for Cancer Treatment.

Although much progress has been made over the last decades, there is still a significant clinical need for novel therapies to manage cancer. Typical problems are that solid tumors are frequently inaccessible, aggressive, and metastatic. To contribute to solving some of these issues, we have developed a novel radioisotope-labeled 27 nm nanoparticle, 177Lu-SN201, to selectively target solid tumors via the enhanced permeability and retention effect, allowing irradiation intratumorally. We show that 177Lu-SN201 has robust stealth properties in vitro and anti-tumor efficacy in mouse mammary gland and colon carcinoma models. The possible clinical application is also addressed with single photon emission computed tomography imaging, which confirms uptake in the tumor, with an average activity of 19.4% injected dose per gram (ID/g). The properties of 177Lu-SN201 make it a promising new agent for radionuclide therapy with the potential to target several solid tumor types.

Specific and reversible immobilization of histidine-tagged proteins on functionalized silicon nanowires.

Silicon nanowire (Si NW)-based field effect transistors (FETs) have shown great potential as biosensors (bioFETs) for ultra-sensitive and label-free detection of biomolecular interactions. Their sensitivity depends not only on the device properties, but also on the function of the biological recognition motif attached to the Si NWs. In this study, we show that SiNWs can be chemically functionalized with Ni:NTA motifs, suitable for the specific immobilization of proteins via a short polyhistidine tag (His-tag) at close proximity to the SiNW surface. We demonstrate that the proteins preserve their function upon immobilization onto SiNWs. Importantly, the protein immobilization on the Si NWs is shown to be reversible after addition of EDTA or imidazole, thus allowing the regeneration of the bioFET when needed, such as in the case of proteins having a limited lifetime. We anticipate that our methodology may find a generic use for the development of bioFETs exploiting functional protein assays because of its high compatibility to various types of NWs and proteins.

Dosimetric Comparison of Intensity-Modulated Radiotherapy, Volumetric Modulated Arc Therapy and Hybrid Three-Dimensional Conformal Radiotherapy/Intensity-Modulated Radiotherapy Techniques for Right Breast Cancer.

This study aimed to compare different types of right breast cancer radiotherapy planning techniques and to estimate the whole-body effective doses and the critical organ absorbed doses. The three planning techniques are intensity-modulated radiotherapy (IMRT), volumetric modulated arc therapy (VMAT; two methods) and hybrid 3D-CRT/IMRT (three-dimensional conformal radiotherapy/intensity-modulated radiotherapy). The VMAT technique includes two methods to deliver a dose: non-continuous partial arc and continuous partial arc. A thermoluminescent dosimeter (TLD) is placed in the RANDO phantom to estimate the organ absorbed dose. Each planning technique applies 50.4 Gy prescription dose and treats critical organs, including the lung and heart. Dose-volume histogram was used to show the planning target volume (V95%), homogeneity index (HI), conformity index (CI), and other optimized indices. The estimation of whole-body effective dose was based on the International Commission on Radiation Protection (ICRP) Publication 60 and 103. The results were as follows: Continuous partial arc and non-continuous partial arc showed the best CI and HI. The heart absorbed doses in the continuous partial arc and hybrid 3D-CRT/IMRT were 0.07 ± 0.01% and 0% (V5% and V10%, respectively). The mean dose of the heart was lowest in hybrid 3D-CRT/IMRT (1.47 Gy ± 0.02). The dose in the left contralateral lung (V5%) was lowest in continuous partial arc (0%). The right ipsilateral lung average dose and V20% are lowest in continuous partial arc. Hybrid 3D-CRT/IMRT has the lowest mean dose to contralateral breast (organs at risk). The whole-body effective doses for ICRP-60 and ICRP-103 were highest in continuous partial arc (2.01 Sv ± 0.23 and 2.89 Sv ± 0.15, respectively). In conclusion, the use of VMAT with continuous arc has a lower risk of radiation pneumonia, while hybrid 3D-CRT/IMRT attain lower secondary malignancy risk and cardiovascular complications.

The hot deformation behavior and microstructure evolution of HA/Mg-3Zn-0.8Zr composites for biomedical application.

The hot deformation behavior of nano-sized hydroxylapatite (HA) reinforced Mg-3Zn-0.8Zr composites were performed by means of Gleeble-1500D thermal simulation machine in a temperature range of 523-673K and a strain rate range of 0.001-1s-1, and the microstructure evolution during hot compression deformation were also investigated. The results show that the flow stress increases increasing strain rates at a constant temperature, and decreases with increasing deforming temperatures at a constant strain rate. Under the same processing conditions, the flow stresses of the 1HA/Mg-3Zn-0.8Zr specimens are higher than those of the Mg-3Zn-0.8Zr alloy specimens, and the difference is getting closer with increasing deformation temperature. The hot deformation behaviors of Mg-3Zn-0.8Zr and 1HA/Mg-3Zn-0.8Zr can be described by constitutive equation of hyperbolic sine function with the hot deformation activation energy being 124.6kJ/mol and 125.3kJ/mol, respectively. Comparing with Mg-3Zn-0.8Zr alloy, the instability region in the process map of 1HA/Mg-3Zn-0.8Zr expanded to a bigger extent at the same conditions. The optimum process conditions of 1HA/Mg-3Zn-0.8Zr composite is concluded as between the temperature window of 573-623K with a strain rate range of 0.001-0.1s-1. A higher volume fraction and smaller grain size of dynamic recrystallization (DRX) grains was observed in 1HA/Mg-3Zn-0.8Zr specimens after the hot compression deformation compared with Mg-3Zn-0.8Zr alloy, which was ascribed to the presence of the HA particles that play an important role in particle-stimulated nucleation (PSN) mechanism and can effectively hinder the migration of interfaces.

Vertical nanowire arrays as a versatile platform for protein detection and analysis.

Protein microarrays are valuable tools for protein assays. Reducing spot sizes from micro- to nano-scale facilitates miniaturization of platforms and consequently decreased material consumption, but faces inherent challenges in the reduction of fluorescent signals and compatibility with complex solutions. Here we show that vertical arrays of nanowires (NWs) can overcome several bottlenecks of using nanoarrays for extraction and analysis of proteins. The high aspect ratio of the NWs results in a large surface area available for protein immobilization and renders passivation of the surface between the NWs unnecessary. Fluorescence detection of proteins allows quantitative measurements and spatial resolution, enabling us to track individual NWs through several analytical steps, thereby allowing multiplexed detection of different proteins immobilized on different regions of the NW array. We use NW arrays for on-chip extraction, detection and functional analysis of proteins on a nano-scale platform that holds great promise for performing protein analysis on minute amounts of material. The demonstration made here on highly ordered arrays of indium arsenide (InAs) NWs is generic and can be extended to many high aspect ratio nanostructures.