Monitoring the intramolecular charge transfer process in the Z907 solar cell sensitizer: a transient Vis and IR spectroscopy and ab initio investigation.

We have analyzed the excited state dynamics of the heteroleptic [(NCS)2Ru(bpy-(COOH)2)(bpy-(C6H13)2)] Z907 solar cell sensitizer in solution and when adsorbed onto thin TiO2 films, by combining transient visible and infrared (IR) spectroscopies with ab initio Density Functional Theory (DFT) and Time-Dependent DFT (TDDFT) calculations. Upon excitation with ultra-short pulses in ethanol and dimethyl-sulphoxide solutions, the visible spectra show the appearance of a positive signal around 650 nm, within the instrumental time resolution (<100 fs), which in ethanol undergoes a red-shift in about 20 ps. Measurements in the IR indicate that, upon excitation, both the CN and CO marker bands, associated with the NCS and COOH groups, downshift in frequency, in response to intramolecular ligand + metal (Ru-NCS) to ligand' (bpy-COOH2) charge transfer (LML'CT). Vibrational cooling is observed in both solvents; in ethanol it is overtaken by the hydrogen bond dynamics. On the basis of DFT/TDDFT calculations, explicitly modeling the interaction of the NCS and COOH groups with solvent (ethanol) molecules, we rationalize the observed IR and visible spectral evolution as arising from the change in the hydrogen-bond network, which accompanies the transition to the lowest-energy triplet state. This interpretation provides a consistent explanation of what is also observed in the transient visible spectra. Transient IR measurements repeated for molecules adsorbed on TiO2 and ZrO2 films, allow us to identify the structural changes signaling the dye triplet excited state formation and evidence multiexponential electron injection rates into the semiconductor TiO2 film.

An integrated experimental and theoretical approach to the spectroscopy of organic-dye-sensitized TiO2 heterointerfaces: disentangling the effects of aggregation, solvation, and surface protonation.

We report a joint experimental and computational study into the spectroscopic properties of a prototypical D5 organic dye, both in solution and adsorbed on a TiO2 surface, with the aim of modeling and quantifying the UV/Vis spectral shifts that occur in the different explored environments. Going from the dye in solution to dye-sensitized TiO2, various factors may shift the position of the UV/Vis absorption maximum, both towards longer and shorter wavelengths. Here we have focused on the effect of dye aggregation on TiO2, surface protonation, and solvent effects. The D5 dye forms stable aggregates on the TiO2 surface that cause spectral blueshifts. We used different sensitization conditions to vary the dye loading and thus the extent of dye aggregation. For each sensitization condition, we explored protonated and native TiO2 films. Computational modeling of different dimeric aggregates with increasing intermolecular interactions and simulation of the associated optical responses also confirm the observed spectral blueshifts. Our results show that both the presence of surface protons and solvent stabilize the excited state of the adsorbed dye molecules, which causes a marked redshift in the absorption maximum and thus moves in the opposite direction to the shift due to the increase in the surface coverage.

Tuning the dipolar second-order nonlinear optical properties of cyclometalated platinum(II) complexes with tridentate N

Appropriate functionalization of the cyclometalated ligand, L, and the choice of the ancillary ligand, X, allows the dipolar second-order nonlinear optical response of luminescent [PtLX] complexes--in which L is an N^C^N-coordinated 1,3-di(2-pyridyl)benzene ligand and X is a monodentate halide or acetylide ligand--to be controlled. The complementary use of electric-field-induced second-harmonic (EFISH) generation and harmonic light scattering (HLS) measurements demonstrates how the quadratic hyperpolarizability of this appealing family of multifunctional chromophores, characterized by a good transparency throughout much of the visible region, is dominated by an octupolar contribution.

Thiocyanate-free ruthenium(II) sensitizer with a pyrid-2-yltetrazolate ligand for dye-sensitized solar cells.

The synthesis of the new complex [Ru(Tetrazpy)(dcbpy)2]Cl is reported, along with its spectroscopical, electrochemical, and theoretical characterization. The first dye-sensitized solar cell device with this complex has been prepared, leading to a 3% of conversion efficiency, promising data considering the simplicity of the Tetrazpy ligand.

Quaterpyridine ligands for panchromatic Ru(II) dye sensitizers.

A new general synthetic access to carboxylated quaterpyridines (qpy), of interest as ligands for panchromatic dye-sensitized solar cell organometallic sensitizers, is presented. The strategic step is a Suzuki-Miyaura cross-coupling reaction, which has allowed the preparation of a number of representative unsubstituted and alkyl and (hetero)aromatic substituted qpys. To bypass the poor inherent stability of 2-pyridylboronic acid derivatives, we successfully applied N-methyliminodiacetic acid (MIDA) boronates as key reagents, obtaining the qpy ligands in good yields up to (quasi)gram quantities. The structural, spectroscopic (NMR and UV-vis), electrochemical, and electronic characteristics of the qpy have been experimentally and computationally (DFT) investigated. The easy access to the bis-thiocyanato Ru(II) complex of the parent species of the qpy series, through an efficient route which bypasses the use of Sephadex column chromatography, is shown. The bis-thiocyanato Ru(II) complex has been spectroscopically (NMR and UV-vis), electrochemically, and computationally investigated, relating its properties to those of previously reported Ru(II)-qpy complexes.

Novel heteroleptic Ru(II) complexes: synthesis, characterization and application in dye-sensitized solar cells.

Six new heteroleptic Ru(II) complexes (MC118, MC120-123 and MC126), of general formula Ru(L1)(L2)(NCS)2, where L1 and L2 are respectively dicarboxylated and π-conjugated functionalized (dissymmetric) bipyridine ligands, were designed, synthesized and applied as sensitizers in dye-sensitized solar cells. These complexes were characterized both experimentally and theoretically, showing promising optical properties, with higher extinction coefficients compared to the prototypical N719 dye. When employed in working devices, in combination with a liquid I(-)/I3(-) redox electrolyte, the investigated sensitizers have shown power conversion efficiencies between 6.0 and 8.0%, comparable with the reference N719 dye tested under similar fabrication and evaluation conditions.

Unexpectedly high second-order nonlinear optical properties of simple Ru and Pt alkynyl complexes as an analytical springboard for NLO-active polymer films.

The unexpectedly high quadratic hyperpolarizability values of simple Ru and Pt alkynyl complexes have been measured by the EFISH technique, and this prompted us to investigate their potential as molecular building blocks for composite films with second harmonic generation properties.

Engineering of Ru(II) dyes for interfacial and light-harvesting optimization.

A new Ru(II) dye, Ru(L1)(L2) (NCS)2, L1 = (4-(5-hexylthiophen-2-yl)-4'(4-carboxyl-phenyl 2,2'-bipyridine) and L2 = (4-4'-dicarboxy-2,2'-bipyridine), labelled MC112, based on a dissymmetric bipyridine ligand for improved interfacial and optical properties, was synthesized and used in DSCs, yielding photovoltaic efficiencies of 7.6% under standard AM 1.5 sunlight and an excellent device stability. Increased light harvesting and IPCE maximum were observed with MC112 compared to the prototypical homoleptic N719 dye, due to the functionalized bipyridyne ligand acting as an antenna. In addition, the mixed bipyridyne ligand allowed MC112 binding to TiO2 to occur via three anchoring carboxylic groups, thus exhibiting similar interfacial properties to those of the N719 dye. DFT/TDDFT calculations were performed on the new dye, both in solution and adsorbed on a TiO2 surface model, revealing that the peculiar photovoltaic properties of the MC112 dye are related to its anchoring mode. The new design rule thus allows us to engineer both light-harvesting and interfacial properties in the same dye.

Thiocyanate-free ruthenium(II) sensitizers for dye-sensitized solar cells based on the cobalt redox couple.

Two thiocyanate-free ruthenium(II) sensitizers, TFRS-41 and TFRS-42, with distinctive dialkoxyphenyl thienyl substituents were successfully prepared and tested for potential applications in making dye-sensitized solar cells (DSCs). Subsequent device fabrication was conducted by using a [Co(bpy)3 ](2+/3+) -based (bpy=2,2'-bipyridine) electrolyte, for which the best performance data, namely, JSC =13.11 mA cm(-2) , VOC =862 mV, fill factor=0.771, and η=8.71%, were recorded for the sensitizer TFRS-42 with a 2,6-dialkoxyphenyl substituent under AM 1.5G irradiation. The markedly higher Voc value was confirmed by the longer electron lifetime revealed in transient photovoltage (TPV) measurements versus the TFRS-1 sensitizer. In addition, DFT calculation and detailed first-principles computational analysis were conducted to provide a rationale for the observed trends in their photovoltaic performances and electron lifetimes, with reference to different performances exhibited by three thiocyanate-free sensitizers, TFRS-1, TFRS-41 and TFRS-42, versus Z907 reference. Through the proper control of peripheral substituents, the thiocyanate-free ruthenium(II)-based DSC sensitizers can positively influence the performances of DSCs, with better light-harvesting capability and suppressed charge recombination, for DSC cells fabricated by using a [Co(bpy)3 ](2+/3+) -based electrolyte.

An investigation on the second order nonlinear optical response of tris-cyclometallated Ir(III) complexes with variously substituted 2-phenylpyridines.

The second order nonlinear optical (NLO) properties of various simple tris-cyclometallated Ir(III) complexes bearing 2-phenylpyridine ligands have been investigated by means of the EFISH technique, evidencing how appropriate substitution of the cyclometallated ligands may allow the tuning of the second-order NLO response of this unusual family of 3D chromophores. To evaluate the dipole moments and to gain insight into the electronic structure and optical properties of the investigated complexes we also performed Density Functional Theory (DFT) calculations.

A simple synthetic route to obtain pure trans-ruthenium(II) complexes for dye-sensitized solar cell applications.

We report a facile synthetic route to obtain functionalized quaterpyridine ligand and its trans-dithiocyanato ruthenium complex, based on a microwave-assisted procedure. The ruthenium complex has been purified using a silica chromatographic column by protecting carboxylic acid groups as iso-butyl ester, which are subsequently hydrolyzed. The highly pure complex exhibits panchromatic response throughout the visible region. DFT/time-dependent DFT calculations have been performed on the ruthenium complex in solution and adsorbed onto TiO2 to analyze relative electronic and optical properties. The ruthenium complex endowed with the functionalized quaterpyridine ligand was used as a sensitizer in dye-sensitized solar cell yielding a short-circuit photocurrent density of more than 19 mA cm(-2) with a broad incident photon to current conversion efficiency spectra ranging from 400 to 900 nm, exceeding 80 % at 700 nm.

Acid-base properties of the N3 ruthenium(II) solar cell sensitizer: a combined experimental and computational analysis.

We report a combined spectro-photometric and computational investigation of the acid-base equilibria of the N3 solar cell sensitizer [Ru(dcbpyH(2))(2)(NCS)(2)] (dcbpyH(2) = 4,4'-dicarboxyl-2,2' bipyridine) in aqueous/ethanol solutions. The absorption spectra of N3 recorded at various pH values were analyzed by Single Value Decomposition techniques, followed by Global Fitting procedures, allowing us to identify four separate acid-base equilibria and their corresponding ground state pK(a) values. DFT/TDDFT calculations were performed for the N3 dye in solution, investigating the possible relevant species obtained by sequential deprotonation of the four dye carboxylic groups. TDDFT excited state calculations provided UV-vis absorption spectra which nicely agree with the experimental spectral shapes at various pH values. The calculated pK(a) values are also in good agreement with experimental data, within <1 pK(a) unit. Based on the calculated energy differences a tentative assignment of the N3 deprotonation pathway is reported.