New Strategy for the Design of Anti-Corrosion Coatings in Bipolar Plates Based on Hybrid Organic-Inorganic Layers.

As a star material in conducting polymers, a polypyrrole coating was assembled onto the surface of 316 stainless steel by an electrochemical method. In the next step, the composite layer consisting of carbon nitride nanosheets (CNNS) and polymethyl methacrylate (PMMA) was sprayed. The corrosion manner of composite coatings in a simulated proton-exchange membrane fuel cell (PEMFC) environment was evaluated. The results show that the final coating generated at a voltage of 1.0 has demonstrated the optimized corrosion resistance. The polypyrrole layer improves the corrosion resistance of the stainless steel substrate, and the CNNS/PMMA coating further strengthens the physical barrier effect of the coating in corrosive solutions.

Key Role Effect of Samarium in Realizing Zero Thermal Quenching and Achieving a Moisture-Resistant Reddish-Orange Emission in Ba3LaNb3O12:Sm3.

The strategy to enhance phosphor stability against thermal quenching and moisture conditions will contribute to controlling the feature of phosphor-converted white-light-emitting diodes (pc-WLEDs). Herein, an effective strategy is achieved with the incorporation of Sm3+ ions, and a robust reddish-orange emission (no thermal quenching up to 498 K) is obtained based on Ba3LaNb3O12 as a host. In light of excitation by near-ultraviolet irradiation at 408 nm, Ba3LaNb3O12:Sm3+ gives rise to a typical signal ascribed to the 4G5/2 → 6HJ/2 (J = 5, 7, 9, and 11) transitions of Sm3+ ions. The concentration quenching effect is observed when the Sm3+ content exceeds 10%, and the quenching mechanism is caused by electronic dipole-dipole interactions. Based on the narrow emission curves, a very high color purity (92.4%) could be recorded. The Sm3+ substitution at the Ba2+/La3+ site leads to a rigid structural lattice and abundant electron-trapping centers for the Sm3+ ions, which will be responsible for the zero-thermal-quenching phenomenon. In addition, oleic acid (OA) is selected to form a hydrophobic covering surface structure to protect Ba3LaNb3O12:Sm3+, which can assist in improving the moisture resistance. The most favorable parameters concerning the warm-light emission (a high general color rendering index, Ra, of 85.7 and a low correlated color temperature, CCT, of 4965 K) can be achieved in pc-WLEDs containing an OA-modified sample. Moreover, its luminous efficiency, LE, can maintain 82.9% of its initial value after 120 h under controlled environmental conditions of 85 °C and 85% humidity. These results pave a new way to optimize the sample as a potential candidate for red-emitting materials.

Solvent-Type Passivation Strategy Controls Solid-State Self-Quenching-Resistant Behavior in Sulfur Dots.

Treatment of sulfur dots with polyethylene glycol (PEG) has been an efficient way to achieve a high luminescence quantum yield, and such a PEG-related quantum dot (QD)-synthesis strategy has been well documented. However, the polymeric insulating capping layer acting as the "thick shell" will significantly slow down the electron-transfer efficiency and severely hamper its practical application in an optoelectric field. Especially, the employment of synthetic polymers with long alkyl chains or large molecular weights may lead to structural complexity or even unexpected changes of physical characteristics for QDs. Therefore, in sulfur dot preparation, it is a breakthrough to use short-chain molecular species to replace PEG for better control and reproducibility. In this article, a solvent-type passivation (STP) strategy has been reported, and no PEG or any other capping agent is required. The main role of the solvent, ethanol, is to directly react with NaOH, and the generated sodium ethoxide passivates the surface defects. The afforded STP-enhanced emission sulfur dots (STPEE-SDs) possess not only the self-quenching-resistant feature in the solid state but also the extension of fluorescence band toward the wavelength as long as 645 nm. The realization of sulfur dot emission in the deep-red region with a decent yield (8.7%) has never been reported. Moreover, a super large Stokes shift (300 nm, λex = 345 nm, λem = 645 nm) and a much longer decay lifetime (109 µs) have been found, and such values can facilitate to suppress the negative influence from background signals. Density functional theory demonstrates that the surface passivation via sodium ethoxide is dynamically favorable, and the spectroscopic insights into emission behavior could be derived from the passivation effect of the sulfur vacancy as well as the charge-transfer process dominated by the highly electronegative ethoxide layer.

Lanthanide Molecular Species Generated Fe3O4@SiO2-TbDPA Nanosphere for the Efficient Determination of Nitrite.

The presence of nitrite (NO2-) in water and food leads to serious problems in public health and the environment. Therefore, it is important to develop a rapid and efficient method for the selective detection of NO2-. In this work, the synthesis and characterization of magnetic Fe3O4@SiO2-TbDPA nanoprobe have been carried out. The Fe3O4@SiO2-TbDPA aqueous solution exhibits a strong green emission. Due to the addition of various concentrations of NO2- (0-100 µM), the fluorescence intensity has been suppressed. The nanoprobe Fe3O4@SiO2-TbDPA exhibits excellent selectivity and sensitivity toward NO2- ions. Excellent linearity is obtained in the range of 5-80 µM with a detection limit of 1.03 µM. Furthermore, the presence of magnetic Fe3O4 nanoparticles in Fe3O4@SiO2-TbDPA nanospheres will also facilitate the effective separation of Fe3O4@SiO2-TbDPA from the aqueous solution. Our proposed strategy is expected to fabricate an organic-inorganic hybrid magnetic nanomaterial and can be used as an efficient sensor. It has been shown that this new strategy has numerous advantages, such as high stability, selectivity, and simplicity of operation. It demonstrates great potential for simple and convenient NO2- detection. It may expand to a variety of ranges in environmental monitoring and biomedical fields.