RESUMO
Redox-active transition metal oxides (TMOs) play crucial roles in diverse energy storage and conversion technologies, such as batteries and pseudocapacitors. These materials show intricate electrochemical charge storage processes, encompassing both bulk ion-intercalation, typical of battery electrodes, and pseudocapacitive-like behavior localized near the surfaces. However, understanding the underlying mechanisms of charge storage in redox-active TMOs is challenging due to the coexistence of these behaviors. In this study, we propose an integrated approach that combines operando electrochemical and optical techniques to disentangle the contributions of bulk and surface phenomena. Using birnessite δ-MnO2-x as a model system, we account for surface pseudocapacitive-like layers and employ a refined model that incorporates both surface reactions and bulk chemical diffusion. This methodology allows us to extract essential kinetic parameters, establishing a fundamental framework for unraveling surface and bulk electrochemical processes. This advancement provides a valuable tool for the rational design of energy storage devices, enhancing our ability to tailor these materials for specific applications.
RESUMO
Triggering phase transitions by controlling the anion stoichiometry is an effective method of tuning the electrocatalytic activity of the functional oxides. However, understanding the potential differences in the reaction mechanism(s) of different phases requires the accurate mapping of phase boundaries during the electrochemical reactions, which can be quite challenging. In this work, we have established a feasible electrochemical method based on the measurement of chemical capacitance to resolve the critical stoichiometry at phase boundaries under operando conditions. We select a simple binary oxide PrOx as a proof-of-principle model system, which shows excellent activity for high-temperature oxygen incorporation and evolution reactions (OIR/OER). We show that the phase transition can be sensitively probed by quantifying the chemical capacitance, which can be further used for differentiating the OIR/OER mechanisms across the phase boundary of PrOx. Therefore, our findings provide a new framework for exploring phase engineering as a tool for the design of electrocatalysts.
RESUMO
Ferroelectrics and ionic conductors are important functional materials, each supporting a plethora of applications in information and energy technology. The underlying physics governing their functional properties is ionic motion, and yet studies of ferroelectrics and ionic conductors are often considered separate fields. Based on first-principles calculations and deep-learning-assisted large-scale molecular dynamics simulations, we report ferroelectric-switching-promoted oxygen ion transport in HfO_{2}, a wide-band-gap insulator with both ferroelectricity and ionic conductivity. Applying a unidirectional bias can activate multiple switching pathways in ferroelectric HfO_{2}, leading to polar-antipolar phase cycling that appears to contradict classical electrodynamics. This apparent conflict is resolved by the geometric-quantum-phase nature of electric polarization that carries no definite direction. Our molecular dynamics simulations demonstrate bias-driven successive ferroelectric transitions facilitate ultrahigh oxygen ion mobility at moderate temperatures, highlighting the potential of combining ferroelectricity and ionic conductivity for the development of advanced materials and technologies.
RESUMO
Protonation can be used to tune diverse physical and chemical properties of functional oxides. Although protonation of nickelate perovskites has been reported, details on the crystal structure of the protonated phase and a quantitative understanding of the effect of protons on physical properties are still lacking. Therefore, in this work, we select NdNiO3 (NNO) as a model system to understand the protonation process from pristine NNO to protonated HxNdNiO3 (H-NNO). We used a reliable electrochemical method with well-defined reference electrode to trigger the protonation-induced phase transition. We found that the protonated H-NNO phase showed a colossal â¼13% lattice expansion caused by a large tilt of NiO6 octahedra and displacement of Nd cations. Importantly, we further designed a novel device configuration to induce a gradient of proton concentration into a single NNO thin film to establish a quantitative correlation between the proton concentration and the lattice constant and transport property of H-NNO.
RESUMO
Structure-activity relationships built on descriptors of bulk and bulk-terminated surfaces are the basis for the rational design of electrocatalysts. However, electrochemically driven surface transformations complicate the identification of such descriptors. Here we demonstrate how the as-prepared surface composition of (001)-terminated LaNiO3 epitaxial thin films dictates the surface transformation and the electrocatalytic activity for the oxygen evolution reaction. Specifically, the Ni termination (in the as-prepared state) is considerably more active than the La termination, with overpotential differences of up to 150 mV. A combined electrochemical, spectroscopic and density-functional theory investigation suggests that this activity trend originates from a thermodynamically stable, disordered NiO2 surface layer that forms during the operation of Ni-terminated surfaces, which is kinetically inaccessible when starting with a La termination. Our work thus demonstrates the tunability of surface transformation pathways by modifying a single atomic layer at the surface and that active surface phases only develop for select as-synthesized surface terminations.
RESUMO
Nanoparticle formation by dopant exsolution (migration) from bulk host lattices is a promising approach to generate highly stable nanoparticles with tunable size, shape, and distribution. We investigated Ni dopant migration from strontium titanate (STO) lattices, forming metallic Ni nanoparticles at STO surfaces. Ex situ scanning probe measurements confirmed the presence of nanoparticles at the H2 treated surface. In situ ambient pressure X-ray photoelectron spectroscopy (AP-XPS) revealed reduction from Ni2+ to Ni0 as Ni dopants migrated to the surface during heating treatments in H2. During Ni migration and reduction, the Sr and Ti chemical states were mostly unchanged, indicating the selective reduction of Ni during treatment. At the same time, we used in situ ambient pressure grazing incidence X-ray scattering (GIXS) to monitor the particle morphology. As Ni migrated to the surface, it nucleated and grew into compressed spheroidal nanoparticles partially embedded in the STO perovskite surface. These findings provide a detailed picture of the evolution of the nanoparticle surface and subsurface chemical state and morphology as the nanoparticles grow beyond the initial nucleation and growth stages.
RESUMO
Unlike the wide-ranging dynamic control of electrical conductivity, there does not exist an analogous ability to tune thermal conductivity by means of electric potential. The traditional picture assumes that atoms inserted into a material's lattice act purely as a source of scattering for thermal carriers, which can only reduce thermal conductivity. In contrast, here we show that the electrochemical control of oxygen and proton concentration in an oxide provides a new ability to bi-directionally control thermal conductivity. On electrochemically oxygenating the brownmillerite SrCoO2.5 to the perovskite SrCoO3-δ, the thermal conductivity increases by a factor of 2.5, whereas protonating it to form hydrogenated SrCoO2.5 effectively reduces the thermal conductivity by a factor of four. This bi-directional tuning of thermal conductivity across a nearly 10 ± 4-fold range at room temperature is achieved by using ionic liquid gating to trigger the 'tri-state' phase transitions in a single device. We elucidated the effects of these anionic and cationic species, and the resultant changes in lattice constants and lattice symmetry on thermal conductivity by combining chemical and structural information from X-ray absorption spectroscopy with thermoreflectance thermal conductivity measurements and ab initio calculations. This ability to control multiple ion types, multiple phase transitions and electronic conductivity that spans metallic through to insulating behaviour in oxides by electrical means provides a new framework for tuning thermal transport over a wide range.
RESUMO
Solid-state ion shuttles are of broad interest in electrochemical devices, nonvolatile memory, neuromorphic computing, and biomimicry utilizing synthetic membranes. Traditional design approaches are primarily based on substitutional doping of dissimilar valent cations in a solid lattice, which has inherent limits on dopant concentration and thereby ionic conductivity. Here, we demonstrate perovskite nickelates as Li-ion shuttles with simultaneous suppression of electronic transport via Mott transition. Electrochemically lithiated SmNiO3 (Li-SNO) contains a large amount of mobile Li+ located in interstitial sites of the perovskite approaching one dopant ion per unit cell. A significant lattice expansion associated with interstitial doping allows for fast Li+ conduction with reduced activation energy. We further present a generalization of this approach with results on other rare-earth perovskite nickelates as well as dopants such as Na+ The results highlight the potential of quantum materials and emergent physics in design of ion conductors.
RESUMO
Segregation and phase separation of aliovalent dopants on perovskite oxide (ABO3) surfaces are detrimental to the performance of energy conversion systems such as solid oxide fuel/electrolysis cells and catalysts for thermochemical H2O and CO2 splitting. One key reason behind the instability of perovskite oxide surfaces is the electrostatic attraction of the negatively charged A-site dopants (for example, ) by the positively charged oxygen vacancies () enriched at the surface. Here we show that reducing the surface concentration improves the oxygen surface exchange kinetics and stability significantly, albeit contrary to the well-established understanding that surface oxygen vacancies facilitate reactions with O2 molecules. We take La0.8Sr0.2CoO3 (LSC) as a model perovskite oxide, and modify its surface with additive cations that are more and less reducible than Co on the B-site of LSC. By using ambient-pressure X-ray absorption and photoelectron spectroscopy, we proved that the dominant role of the less reducible cations is to suppress the enrichment and phase separation of Sr while reducing the concentration of and making the LSC more oxidized at its surface. Consequently, we found that these less reducible cations significantly improve stability, with up to 30 times faster oxygen exchange kinetics after 54 h in air at 530 °C achieved by Hf addition onto LSC. Finally, the results revealed a 'volcano' relation between the oxygen exchange kinetics and the oxygen vacancy formation enthalpy of the binary oxides of the additive cations. This volcano relation highlights the existence of an optimum surface oxygen vacancy concentration that balances the gain in oxygen exchange kinetics and the chemical stability loss.
RESUMO
Topotactic phase transition of functional oxides induced by changes in oxygen nonstoichiometry can largely alter multiple physical and chemical properties, including electrical conductivity, magnetic state, oxygen diffusivity, and electrocatalytic reactivity. For tuning these properties reversibly, feasible means to control oxygen nonstoichiometry-dependent phase transitions in functional oxides are needed. This paper describes the use of electrochemical potential to induce phase transition in strontium cobaltites, SrCoOx (SCO) between the brownmillerite (BM) phase, SrCoO2.5, and the perovskite (P) phase, SrCoO3âδ. To monitor the structural evolution of SCO, in situ X-ray diffraction (XRD) was performed on an electrochemical cell having (001) oriented thin-film SrCoOx as the working electrode on a single crystal (001) yttria-stabilized zirconia electrolyte in air. In order to change the effective pO2 in SCO and trigger the phase transition from BM to P, external electrical biases of up to 200 mV were applied across the SCO film. The phase transition from BM to P phase could be triggered at a bias as low as 30 mV, corresponding to an effective pO2 of 1 atm at 500 °C. The phase transition was fully reversible and the epitaxial film quality was maintained after reversible phase transitions. These results demonstrate the use of electrical bias to obtain fast and easily accessible switching between different phases as well as distinct physical and chemical properties of functional oxides as exemplified here for SCO.
RESUMO
The degradation of the surface chemistry on perovskite (ABO3) oxides is a critical issue for their performance in energy conversion systems such as solid oxide fuel/electrolysis cells and in splitting of H2O and CO2 to produce fuels. This degradation is typically in the form of segregation and phase separation of dopant cations from the A-site, driven by elastic and electrostatic energy minimization and kinetic demixing. In this study, deposition of Ti at the surface was found to hinder the dopant segregation and the corresponding electrochemical degradation on a promising SOFC cathode material, La(0.8)Sr(0.2)CoO3 (LSC). The surface of the LSC films was modified by Ti (denoted as LSC-T) deposited from a TiCl4 solution. The LSC and LSC-T thin films were investigated by electrochemical impedance spectroscopy, nano-probe Auger electron spectroscopy, and X-ray photoelectron spectroscopy (XPS), upon annealing at 420-530 °C in air up to about 90 hours. The oxygen exchange coefficient, k(q), on LSC-T cathodes was found to be up to 8 times higher than that on LSC cathodes at 530 °C and retained its stability. Sr-rich insulating particles formed at the surface of the annealed LSC and LSC-T films, but with significantly less coverage of such particles on the LSC-T. From this result, it appears that modification of the LSC surface with Ti reduces the segregation of the blocking Sr-rich particles at the surface, and a larger area on LSC surface (with a higher Sr doping level in the lattice) is available for the oxygen reduction reaction. The stabilization of the LSC surface through Ti-deposition can open a new route for designing surface modifications on perovskite oxide electrodes for high temperature electro- and thermo-chemical applications.
RESUMO
Nanomaterials based on transition-metal oxides (TMOs) that contain late 3d transition metals (e.g., Mn, Fe, Co, Ni) have diverse properties and functionality that are related to the oxidation state of constituent transition-metal (TM) cations. X-ray photoelectron spectroscopy (XPS) of TM 2p orbitals has been widely used to quantify the TM oxidation state of TMOs. However, 2p XPS spectra of late 3d TM cations usually have complicated shapes due to the charge transfer between the TM cation and oxygen ligands (anions), which makes the analysis highly nontrivial. In this article, we will examine the validity of commonly used analysis methods based on either peak fitting or the shift of binding energy (BE). The different origins of the BE shift in XPS spectra will be discussed. We will then introduce a model to reproduce the complex shapes of TM 2p spectra, based on fundamental parameters that describe the TMO electronic structure.
RESUMO
The discovery of polar metal opens the door to incorporating electric polarization into electronics with the potential to invigorate next-generation multifunctional electronic devices. Especially, electric polarization can be induced by geometric design in non-polar perovskite oxides. Here, the epitaxial strain exerted on the deposited single-crystalline NdNiO3 thin films is systematically varied in both sign and amplitude by choosing substrates with different lattice mismatch. The pseudocubic NdNiO3(111) film, which is non-polar in its bulk state, is induced to be polar under both compressive and tensile strain. The fine-tuning of epitaxial strain is realized by continuously varying the film thickness using the "thickness-wedge" growth technique, and from the elucidated thickness dependence, the electric polarization and metallicity can be further optimized. Moreover, transitioning from isotropic to anisotropic epitaxial strain gives rise to an ideal polar metal state in the pseudocubic NdNiO3(102) film on an orthorhombic substrate, achieving a remarkably low resistivity of 173 µΩ cm at room temperature. The metal-insulator transition in NdNiO3 is completely suppressed and the polar metal state becomes the ground state at all temperatures. These results demonstrate alluring possibilities of induction and manipulation of both electric polarization and electric transport properties in functional perovskite oxides by epitaxial strain engineering.
RESUMO
Metal nanoparticles exsolved and anchored at the parent perovskite oxide surfaces can greatly enhance the activity and antisintering stability for high-temperature (electro-) chemical catalytic reactions. While exsolution of nanoparticles triggered by using conventional high-temperature thermal reduction suffers from slow kinetics, using an electrochemical driving force can promote the exsolution rate. However, a quantitative correlation between the applied electrochemical driving force and the spatial density of exsolved nanoparticles remains unknown. In this work, we use a specially designed electrochemical device to induce a spatially graded voltage in a La0.43Ca0.37Ti0.94Ni0.06O3-δ electrode, in order to systematically investigate the effect of electrochemical switching on exsolution. With increasing driving force, which leads to decreasing oxygen chemical potential, the density of nanoparticles was observed to increase dramatically, while the average particle size remained roughly constant. We further identified oxygen vacancy pairs or clusters as the preferential nucleation sites for exsolution. Our work provided a high-throughput platform for the systematic study of exsolution of perovskite oxides targeted for fuel electrode materials with improved electrocatalytic performance and stability.
RESUMO
Mass production of green hydrogen via water electrolysis requires advancements in the performance of electrocatalysts, especially for the oxygen evolution reaction. In this feature article, we highlight how epitaxial nickelates act as model systems to identify atomic-level composition-structure-property-activity relationships, capture dynamic changes under operating conditions, and reveal reaction and failure mechanisms. These insights guide advanced electrocatalyst design with tailored functionality and superior performance. We conclude with an outlook for future developments via operando characterization and multilayer electrocatalyst design.
RESUMO
Clinical trials have indicated that thalidomide could be used to treat thalassemia, but evidence of changes in liver iron burden and liver volume during thalidomide treatment is lacking. This study aimed to evaluate the liver iron burden and volume changes following thalidomide treatment in patients with transfusion-dependent ß-thalassemia. A total of 66 participants with transfusion-dependent ß-thalassemia were included in this prospective cohort study between January 2017 and December 2020. Patients were treated with thalidomide (150-200 mg/day) plus conventional therapy. Liver volume, liver R2*, and hepatic muscle signal ratio (SIR)_T1 and SIR_T2 were measured with magnetic resonance imaging (MRI), and serum ferritin, hemoglobin, erythrocyte and platelet counts, and liver function were measured at baseline and at the 3rd and 12th months. Adverse events were also noted. Patients showed progressive increase in hemoglobin, erythrocyte, platelet count, SIR_T1, and SIR_T2 during the 12-months follow up. Serum ferritin, R2*, and liver volume progressively decreased during the follow up. The R2* value had a significantly positive correlation with serum ferritin, and SIR_T1 and SIR_T2 had a significantly negative correlation with serum ferritin. No serious adverse events were observed. This study showed that thalidomide could potentially be used to successfully treat patients with transfusion-dependent ß-thalassemia; the liver iron burden and liver volume could be relieved during treatment, and the MRI-measured R2*, SIR_T1, and SIR_T2 may be used to noninvasively monitor liver iron concentration.
RESUMO
Protein-based soft ionic conductors have attracted considerable research interest in recent years with great potential in applications at the human-machine interfaces. However, a fundamental mechanistic understanding of the ionic conductivity of silk-based ionic conductors is still unclear. Here, we first developed an environmental-friendly and scalable method to fabricate silk-based soft ionic conductors using silk proteins and calcium chloride. The mechanistic understanding of the ion transport and molecular interactions between calcium ions and silk proteins at variable water contents was investigated in-depth by combining experimental and simulation approaches. The results show that calcium ions primarily interact with amide groups in proteins at a low water content. The ionic conductivity is low since the calcium ions are confined around silk proteins within 2.0-2.6 Å. As water content increases, the calcium ions are hydrated with the formation of water shells, leading to the increased distance between calcium ions and silk proteins (3.3-6.0 Å). As a result, the motion of the calcium ions increased to achieve a higher ionic conductivity. By optimizing the ratio of the silk proteins, calcium ions, and water, silk-based soft ionic conductors with good stretchability and self-healing properties can be obtained. Such protein-based soft ionic conductors can be further used to fabricate smart devices such as electrochromic devices.
Assuntos
Cálcio , Seda , Humanos , Cloreto de Cálcio , Íons , Água , AmidasRESUMO
We report on the mechanism for hydrogen-induced topotactic phase transitions in perovskite (PV) oxides using La0.7Sr0.3MnO3 as a prototypical example. Hydrogenation starts with lattice expansion confirmed by X-ray diffraction (XRD). The strain- and oxygen-vacancy-mediated electron-phonon coupling in turn produces electronic structure changes that manifest through the appearance of a metal insulator transition accompanied by a sharp increase in resistivity. The ordering of initially randomly distributed oxygen vacancies produces a PV to brownmillerite phase (La0.7Sr0.3MnO2.5) transition. This phase transformation proceeds by the intercalation of oxygen vacancy planes confirmed by in situ XRD and neutron reflectometry (NR) measurements. Despite the prevailing picture that hydrogenation occurs by reaction with lattice oxygen, NR results are not consistent with deuterium (hydrogen) presence in the La0.7Sr0.3MnO3 lattice at steady state. The film can reach a highly oxygen-deficient La0.7Sr0.3MnO2.1 metastable state that is reversible to the as-grown composition simply by annealing in air. Theoretical calculations confirm that hydrogenation-induced oxygen vacancy formation is energetically favorable in La0.7Sr0.3MnO3. The hydrogenation-driven changes of the oxygen sublattice periodicity and the electrical and magnetic properties similar to interface effects induced by oxygen-deficient cap layers persist despite hydrogen not being present in the lattice.
RESUMO
We have developed an experimental system to simultaneously measure surface structure, morphology, composition, chemical state, and chemical activity for samples in gas phase environments. This is accomplished by simultaneously measuring x-ray photoelectron spectroscopy (XPS) and grazing incidence x-ray scattering in gas pressures as high as the multi-Torr regime while also recording mass spectrometry. Scattering patterns reflect near-surface sample structures from the nano-scale to the meso-scale, and the grazing incidence geometry provides tunable depth sensitivity of structural measurements. Scattered x rays are detected across a broad range of angles using a newly designed pivoting-UHV-manipulator for detector positioning. At the same time, XPS and mass spectrometry can be measured, all from the same sample spot and under ambient conditions. To demonstrate the capabilities of this system, we measured the chemical state, composition, and structure of Ag-behenate on a Si(001) wafer in vacuum and in O2 atmosphere at various temperatures. These simultaneous structural, chemical, and gas phase product probes enable detailed insights into the interplay between the structure and chemical state for samples in gas phase environments. The compact size of our pivoting-UHV-manipulator makes it possible to retrofit this technique into existing spectroscopic instruments installed at synchrotron beamlines. Because many synchrotron facilities are planning or undergoing upgrades to diffraction limited storage rings with transversely coherent beams, a newly emerging set of coherent x-ray scattering experiments can greatly benefit from the concepts we present here.
RESUMO
Thalidomide induces γ-globin expression in erythroid progenitor cells, but its efficacy on patients with transfusion-dependent ß-thalassemia (TDT) remains unclear. In this phase 2, multi-center, randomized, double-blind clinical trial, we aimed to determine the safety and efficacy of thalidomide in TDT patients. A hundred patients of 14 years or older were randomly assigned to receive placebo or thalidomide for 12 weeks, followed by an extension phase of at least 36 weeks. The primary endpoint was the change of hemoglobin (Hb) level in the patients. The secondary endpoints included the red blood cell (RBC) units transfused and adverse effects. In the placebo-controlled period, Hb concentrations in patients treated with thalidomide achieved a median elevation of 14.0 (range, 2.5 to 37.5) g/L, whereas Hb in patients treated with placebo did not significantly change. Within the 12 weeks, the mean RBC transfusion volume for patients treated with thalidomide and placebo was 5.4 ± 5.0 U and 10.3 ± 6.4 U, respectively (P < 0.001). Adverse events of drowsiness, dizziness, fatigue, pyrexia, sore throat, and rash were more common with thalidomide than placebo. In the extension phase, treatment with thalidomide for 24 weeks resulted in a sustainable increase in Hb concentrations which reached 104.9 ± 19.0 g/L, without blood transfusion. Significant increase in Hb concentration and reduction in RBC transfusions were associated with non ß0/ß0 and HBS1L-MYB (rs9399137 C/T, C/C; rs4895441 A/G, G/G) genotypes. These results demonstrated that thalidomide is effective in patients with TDT.