RESUMO
Although sex differences have been noted in cellular function and behavior, therapy efficacy, and disease incidence and outcomes, the adoption of sex as a biological variable in tissue engineering and regenerative medicine remains limited. Furthering the development of personalized, precision medicine requires considering biological sex at the bench and in the clinic. This review provides the basis for considering biological sex when designing tissue-engineered constructs and regenerative therapies by contextualizing sex as a biological variable within the tissue engineering triad of cells, matrices, and signals. To achieve equity in biological sex within medicine requires a cultural shift in science and engineering research, with active engagement by researchers, clinicians, companies, policymakers, and funding agencies.
Assuntos
Medicina Regenerativa , Engenharia Tecidual , Feminino , Masculino , Humanos , Medicina de PrecisãoRESUMO
BACKGROUND: The various physical and chemical conditions within the oral cavity are hypothesized to have a significant influence on the behavior of denture adhesives and therefore the overall comfort of denture wearers. As such, this study aims to understand the influence of oral cavity physiological parameters such as temperature (17 to 52 °C), pH (2, 7, 10), and denture adhesive swelling due to saliva (20-120%) on the behavior of denture adhesives. This study further aims to emphasize the need for a collective approach to modelling the in-situ behavior of denture adhesives. METHODS: Rheological measurements were carried out using the Super Polygrip Ultra fresh brand denture adhesive cream to evaluate its storage modulus (G´) and loss modulus (G´´) values at a range of physiologically relevant temperatures, pH values, and degrees of swelling, to represent and characterize the wide variety of conditions that occur within the oral cavity. RESULTS: Rheological data was recorded with respect to variation of temperature, pH, and swelling. Overall, it can be seen that the physiological conditions of the oral cavity have an influence on the rheological properties of the denture adhesive cream. Specifically, our data indicates that the adhesive's mechanical properties are weakly influenced by pH, but do change with respect to the temperature in the oral cavity and the swelling rate of the adhesive. CONCLUSIONS: Our results suggest that the collective inter-play of the parameters pH, temperature and swelling ratio have an influence on the behavior of the denture adhesive. The results clearly highlight the need for developing a multi-parameter viscoelastic material model to understand the collective influence of physiological parameters on the performance of denture adhesives. Multi-parameter models can also potentially be utilized in numerically simulating denture adhesives using finite element simulations.
Assuntos
Cimentos Dentários , Retenção de Dentadura , Humanos , Cimentos Dentários/química , Temperatura , Boca , Concentração de Íons de HidrogênioRESUMO
Degenerated intervertebral discs (IVDs) were treated with autologous adipose-derived stem cells (ASC) loaded into an injectable collagen scaffold in a sheep model to investigate the implant's therapeutic potential regarding the progression of degeneration of previously damaged discs. In this study, 18 merino sheep were subjected to a 3-step minimally invasive injury and treatment model, which consisted of surgically induced disc degeneration, treatment of IVDs with an ASC-loaded collagen hydrogel 6 weeks post-operatively, and assessment of the implant's influence on degenerative tissue changes after 6 and 12 months of grazing. Autologous ASCs were extracted from subcutaneous adipose tissue and cultivated in vitro. At the end of the experiment, disc heights were determined by µ-CT measurements and morphological tissue changes were histologically examined.Histological investigations show that, after treatment with the ASC-loaded collagen hydrogel implant, degeneration-specific features were observed less frequently. Quantitative studies of the degree of degeneration did not demonstrate a significant influence on potential tissue regeneration with treatment. Regarding disc height analysis, at both 6 and 12 months after treatment with the ASC-loaded collagen hydrogel implant a stabilization of the disc height can be seen. A complete restoration of the intervertebral disc heights however could not be achieved.The reported injection procedure describes in a preclinical model a translational therapeutic approach for degenerative disc diseases based on adipose-derived stem cells in a collagen hydrogel scaffold. Further investigations are planned with the use of a different injectable scaffold material using the same test model.
Assuntos
Colágeno/uso terapêutico , Hidrogéis/química , Degeneração do Disco Intervertebral/cirurgia , Disco Intervertebral/cirurgia , Animais , Colágeno/administração & dosagem , Modelos Animais de Doenças , Feminino , Medicina Regenerativa/métodos , OvinosRESUMO
INTRODUCTION: We present a consecutive case series and a systematic review of surgically treated pediatric PCs. We hypothesized that the symptomatic PC is a progressive disease with hydrocephalus at its last stage. We also propose that PC microsurgery is associated with better postoperative outcomes compared to other treatments. METHODS: The systematic review was conducted in PubMed and Scopus. No clinical study on pediatric PC patients was available. We performed a comprehensive evaluation of the available individual patient data of 43 (22 case reports and 21 observational series) articles. RESULTS: The review included 109 patients (72% females). Ten-year-old or younger patients harbored smaller PC sizes compared to older patients (p < 0.01). The pediatric PCs operated on appeared to represent a progressive disease, which started with unspecific symptoms with a mean cyst diameter of 14.5 mm, and progressed to visual impairment with a mean cyst diameter of 17.8 mm, and hydrocephalus with a mean cyst diameter of 23.5 mm in the final stages of disease (p < 0.001). Additionally, 96% of patients saw an improvement in their symptoms or became asymptomatic after surgery. PC microsurgery linked with superior gross total resection compared to endoscopic and stereotactic procedures (p < 0.001). CONCLUSIONS: Surgically treated pediatric PCs appear to behave as a progressive disease, which starts with cyst diameters of approximately 15 mm and develops with acute or progressive hydrocephalus at the final stage. PC microneurosurgery appears to be associated with a more complete surgical resection compared to other procedures.
Assuntos
Neoplasias Encefálicas , Cistos do Sistema Nervoso Central , Cistos , Glândula Pineal , Neoplasias Encefálicas/cirurgia , Cistos do Sistema Nervoso Central/complicações , Cistos do Sistema Nervoso Central/diagnóstico por imagem , Cistos do Sistema Nervoso Central/cirurgia , Criança , Cistos/diagnóstico por imagem , Cistos/cirurgia , Feminino , Humanos , Masculino , Microcirurgia , Glândula Pineal/diagnóstico por imagem , Glândula Pineal/cirurgiaRESUMO
PURPOSE: This work describes a minimally invasive damage model for ovine lumbar discs via partial nucleotomy using a posterolateral approach. METHODS: Two cadavers were dissected to analyze the percutaneous corridor. Subsequently, 28 ovine had their annulus fibrosus punctured via awl penetration under fluoroscopic control and nucleus pulposus tissue removed via rongeur. Efficacy was assessed by animal morbidity, ease of access to T12-S1 disc spaces, and production of a mechanical injury as verified by discography, radiography, and histology. RESULTS: T12-S1 were accessible with minimal nerve damage morbidity. Scar tissue sealed the disc puncture site in all animals within 6 weeks, withstanding 1 MP of intradiscal pressure. Partial nucleotomy led to a significant reduction in intervertebral disk height and an increased histological degeneration score. CONCLUSION: Inducing a reproducible injury pattern of disc degeneration required minimal time, effort, and equipment. The posterolateral approach allows operation on several discs within a single surgery and multiple animal surgeries within a single day.
Assuntos
Degeneração do Disco Intervertebral/veterinária , Deslocamento do Disco Intervertebral/veterinária , Disco Intervertebral/cirurgia , Vértebras Lombares/cirurgia , Punções/métodos , Animais , Modelos Animais de Doenças , Feminino , Fluoroscopia/métodos , Degeneração do Disco Intervertebral/cirurgia , Deslocamento do Disco Intervertebral/cirurgia , Punções/veterinária , Ovinos , Carneiro Doméstico , Microtomografia por Raio-XRESUMO
PURPOSE: The primary goal of this study is to clearly define and evaluate new intervertebral disc height parameters in analysing the morphological pathology of disc degeneration for application in damage model and regeneration therapy development, as well as applying traditional variables to 3-D characterization methods. METHODS: A posterolateral surgical approach was used to induce disc degeneration in an ovine model. At 12-months post-operation, sheep vertebral segments were removed and characterized using micro-CT to evaluate disc height parameters in regard to injury localization. RESULTS: Statistically significant differences between the disc height loss of the left and right side of the disc, consistent with the lateral surgical approach used were seen using the modified average disc height method by Dabbs et al. However, convexity index and the newly proposed Cross Tilt Index did not conclusively demonstrate a difference. CONCLUSION: Two-dimensional morphological evaluations can be applied in 3-D to provide a more complete picture of disc height loss for injury models. New 3-D parameters that are tailored to the type of surgical approach used should be investigated, with the 9-point system described herein providing a useful basis for derived values. Additionally, the surgical approach chosen when artificially injuring the disc can result in asymmetrical degeneration, as indicated by uneven disc height loss.
Assuntos
Modelos Animais de Doenças , Degeneração do Disco Intervertebral/patologia , Disco Intervertebral/patologia , Disco Intervertebral/cirurgia , Ovinos/cirurgia , Microtomografia por Raio-X , Animais , Feminino , Imageamento Tridimensional , Disco Intervertebral/diagnóstico por imagem , Degeneração do Disco Intervertebral/diagnóstico por imagemRESUMO
As considerations are being made for the limitations and safety of long-term human spaceflight, the vasculature is important given its connection to and impact on numerous organ systems. As a major constituent of blood vessels, vascular smooth muscle cells are of interest due to their influence over vascular tone and function. Additionally, vascular smooth muscle cells are responsive to pressure and flow changes. Therefore, alterations in these parameters under conditions of microgravity can be functionally disruptive. As such, here we review and discuss the existing literature that assesses the effects of microgravity, both actual and simulated, on smooth muscle cells. This includes the various methods for achieving or simulating microgravity, the animal models or cells used, and the various durations of microgravity assessed. We also discuss the various reported findings in the field, which include changes to cell proliferation, gene expression and phenotypic shifts, and renin-angiotensin-aldosterone system (RAAS), nitric oxide synthase (NOS), and Ca2+ signaling. Additionally, we briefly summarize the literature on smooth muscle tissue engineering in microgravity as well as considerations of radiation as another key component of spaceflight to contextualize spaceflight experiments, which by their nature include radiation exposure. Finally, we provide general recommendations based on the existing literature's focus and limitations.
RESUMO
Physiological parameters of the oral cavity have a profound impact on any restorative solutions designed for edentulous patients including denture adhesives. This study aims to mathematically quantify the influence of three such variables, namely: the temperature, pH, and the swelling of such adhesives under the influence of saliva on its mechanical behavior. The mathematical quantification is further aimed to implement a material model for such adhesives which considers the impact of such physiological factors. The denture adhesive is experimentally investigated by means of rheological steady state frequency sweep tests to obtain the relaxation spectrum of the material. The relaxation behavior is measured for a wide range of oral cavity temperatures and pH. Also, the adhesive is hydrated and upon swelling to different levels again tested to understand the impact of swelling on the mechanical behavior. The experimentally measured continuous relaxation spectrum is modeled as a viscoelastic material using a discrete set of points based on the Prony series discretization technique. The relaxation spectrums for various temperatures are compared and the possibility of a time-temperature superposition is explored for the model. Similarly, the measured values of Storage and loss modulus are investigated to understand the role of pH and swelling. The results in this study clearly indicated a horizontal shift in the relaxation behavior with increase in temperature. And hence, the time-temperature shift factor was calculated for the adhesive. The relaxation spectrum also showed a strong correlation with swelling of the adhesive and the pH. The influence of these two parameters were captured into the model based on the relaxation time parameter in the Prony series approach. Based on this study the impact of these parameters could be appreciated on the performance and mechanical behavior of denture adhesives and implemented into a Prony series based viscoelastic material model which can be used with numerical simulations.
Assuntos
Boca , Saliva , Humanos , Temperatura , Dentaduras , AdesivosRESUMO
Purpose: Current strategies implementing drug-eluting polymer stent coatings fail to fully address the lasting effects of endothelial suppression which ultimately result in delayed reendothelialization and thrombogenic complications. The present study investigates the in vitro hemocompatibility of all-trans retinoic acid loaded poly (1,8-octanediol-co-citrate) coatings (AtRA-POC coatings) for advanced intravascular stent technology. The ability of these materials in supporting endothelial restoration via migration and proliferation while inhibiting smooth muscle cell growth is also explored. Methods: Using in vitro models, the hemocompatibility of AtRA-loaded POC-coated cobalt chromium (CoCr) vascular stents was evaluated in terms of platelet and inflammatory activity. Platelet activity was quantified by platelet adhesion and platelet activation, further supported by SEM visualization. Inflammatory activity was quantified by the production of proinflammatory cytokines by THP1 monocytes. Lastly, in vitro wound healing and an 5-Ethynyl-2'deoxyuridine (EdU) and pico green DNA assays were used in quantitating endothelial and smooth muscle cell migration and proliferation. Results: Experimental examinations of platelet adhesion and activation demonstrate significant reductions in the platelet response to POC coated AtRA loaded stents when compared to bare CoCr stents. Such findings reveal AtRA-POC coatings to have significantly improved hemocompatibility compared to that of bare metal stents and at least as good as POC alone. Similarly, in reference to LPS-stimulated controls, Human monocyte-like THP1 cells in culture with AtRA-POC-CoCr stents for 24 hours showed reduced detection of proinflammatory cytokines, comparable to that of bare CoCr and untreated controls. This result supports AtRA-POC coatings as possessing limited immunological potential. Observations from in vitro endothelial and smooth muscle cell investigations demonstrate the ability of the drug AtRA to allow cell processes involved in restoration of the endothelium while inhibiting smooth muscle cell processes. Conclusion: This study demonstrates AtRA loaded POC coatings are hemocompatible, noninflammatory, and provide a promising strategy in enhancing vascular stent techniques and clinical integration. Possessing hemocompatibility and immunological compatibility that is at least as good as bare metal stents as clinical standards support the use of AtRA-POC coatings for vascular applications. Additionally, selectively reducing smooth muscle cell proliferation while supporting endothelial cell proliferation and migration further demonstrates the potential of these materials in significantly improving the state of vascular stent technology in the area of stent thrombosis and neointimal hyperplasia.
RESUMO
The introduction of a removable partial denture onto the dental arch significantly influences the mechanical stress characteristics of both the jawbone and oral mucosa. The aim of this study was to analyze the stress state caused by biting forces upon insertion of partial dentures into the assembly, and to understand the influence of the resulting contact pressure on its retention behavior. For this purpose, a numerical model of a removable partial denture is proposed based on 3D models developed using computer tomography data of the jawbone and the removable partial denture. The denture system rests on the oral mucosa surface and three abutment teeth. The application of bite forces on the denture generated a stick condition on the loaded regions of the denture-oral mucosa interface, which indicates positive retention of the denture onto the oral mucosa surface. Slip and negative retention were observed in the regions of the contact space that were not directly loaded. The contact pressures observed in the regions of the oral mucosa in contact with the denture were below the clinical pressure pain threshold value for soft tissue, which potentially lowers the risk of pain being experienced by denture users. Further, the variation of the retention behavior and contact pressures across different regions of the denture assembly was observed. Thus, there is a need for adhesives or restraining mechanisms for the denture system in order to avoid bending and deformation of sections of the denture as a consequence of the applied bite force.
Assuntos
Planejamento de Dentadura , Prótese Parcial Removível , Mandíbula , Mucosa Bucal , Estresse MecânicoRESUMO
The effects of spaceflight, including prolonged exposure to microgravity, can have significant effects on the immune system and human health. Altered immune cell function can lead to adverse health events, though precisely how and to what extent a microgravity environment impacts these cells remains uncertain. Macrophages, a key immune cell, effect the inflammatory response as well as tissue remodeling and repair. Specifically, macrophage function can be dictated by phenotype that can exist between spectrums of M0 macrophage: the classically activated, pro-inflammatory M1, and the alternatively activated, pro-healing M2 phenotypes. This work assesses the effects of simulated microgravity via clinorotation on M0, M1, and M2 macrophage phenotypes. We focus on phenotypic, inflammatory, and angiogenic gene and protein expression. Our results show that across all three phenotypes, microgravity results in a decrease in TNF-α expression and an increase in IL-12 and VEGF expression. IL-10 was also significantly increased in M1 and M2, but not M0 macrophages. The phenotypic cytokine expression profiles observed may be related to specific gravisensitive signal transduction pathways previously implicated in microgravity regulation of macrophage gene and protein expression. Our results highlight the far-reaching effects that simulated microgravity has on macrophage function and provides insight into macrophage phenotypic function in microgravity.
RESUMO
The effects of a microgravity environment on the myriad types of immune cells present within the human body have been assessed both by bench-scale simulation and suborbital methods, as well as in true spaceflight. Macrophages have garnered increased research interest in this context in recent years. Their functionality in both immune response and tissue remodeling makes them a unique cell to investigate in regards to gravisensitive effects as well as parameters of interest that could impact astronaut health. Here, we review and summarize the literature investigating the effects of microgravity on macrophages and monocytes regarding the microgravity environment simulation/generation methods, cell sources, experiment durations, and parameters of interest utilized within the field. We discuss reported findings on the impacts of microgravity on macrophage/monocyte structure, adhesion and migration, proliferation, genetic expression, cytokine secretion, and reactive oxygen species production, as well as polarization. Based on this body of data, we make recommendations to the field for careful consideration of experimental design to complement existing reports, as the multitude of disparate study methods previously published can make drawing direct comparisons difficult. However, the breadth of different testing methodologies can also lend itself to attempting to identify the most robust and consistent responses to microgravity across various testing conditions.
RESUMO
The base fit between a removable partial denture (RPD) and the underlying soft tissue plays a significant role in its performance. The application of a denture adhesive is hypothesized to result in better retention of RPDs and, as a result, contribute to lower stress on the oral mucosa. The objectives of this study were to observe and compare the distribution of simulated bite forces applied to the RPD through the abutments and soft tissue for models with and without the use of a denture adhesive. Furthermore, we evaluated the possible benefit of using a denture adhesive in lowering stresses on the oral mucosa. The RPD, mandible, oral mucosa, abutment teeth supporting the RPD, and the corresponding abutment periodontal ligaments (PDLs) were modelled as 3D volumes based on computer tomography (CT) datasets. A viscoelastic adhesive layer between the RPD and oral mucosa was incorporated into this base model using Prony series approximation. The layer was developed as a volume extract using the denture surface. Finite element (FE) simulations were performed for the bite force on one of the RPD segments, with the resulting force and moments experienced by the dental structures and oral mucosa compared between the model with the adhesive layer and the base model without. As a result, the contact pressure on the oral mucosa for the model with the denture adhesive decreased to 0.15 MPa as compared to 0.25 MPa for the model without the adhesive. The potential role of denture adhesives in leading to a better fit between the RPD and oral mucosa as well as lowering contact pressures could be used to improve comfort in patients wearing RPDs.
RESUMO
BACKGROUND: Severe cranial injuries require reconstructive surgeries to protect the underlying brain and to restore cranial contour and scalp integrity, as well as avoid complications such as neurocognitive decline. In cases of full-thickness cranial tissue damage, adept surgical skill in both bone and soft tissue reconstruction is critical for a minimally invasive surgery and successful bone integration without endangering previous soft tissue efforts. Different surgical techniques and materials are beset with various problems. OBJECTIVE: To present a surgical procedure intended for the reconstruction of complex calvarial and associated tissue defects with reduced invasiveness and improved soft tissue healing compared to the existing gold standard. Both soft tissue and bone reconstruction techniques are described in detail due to their intertwined importance for successful full thickness skull and scalp reconstruction. METHODS: During initial medical care, aseptic wound treatment and temporary wound closure are performed. Two weeks postinjury, extensive necrotic tissue debridement and soft tissue reconstruction lay the foundation for well-vascularized tissue regeneration. Soft tissue healing is followed by minimally invasive cranioplasty using autologous split-rib transplants after approximately 6 mo. RESULTS: With consideration of the established gold standards for treatment, soft tissue regenerated without complications. The minimally invasive insertion of autologous rib grafts underneath the healed soft tissue allowed for quick recovery without requiring further follow-up treatments. CONCLUSION: We optimized initial scalp wound healing and bone regeneration by making use of minimally invasive procedures and autologous materials, offering a viable treatment alternative to existing methods for treating large cranial bone injuries.
Assuntos
Doenças Ósseas , Traumatismos Craniocerebrais , Procedimentos de Cirurgia Plástica , Doenças Ósseas/cirurgia , Traumatismos Craniocerebrais/cirurgia , Humanos , Couro Cabeludo/cirurgia , Crânio/cirurgiaRESUMO
The potential therapeutic benefit of adipose-derived stem cells (ASCs) encapsulated in an injectable hydrogel for stimulating intervertebral disc (IVD) regeneration has been assessed by a number of translational and preclinical studies. However, previous work has been primarily limited to small animal models and short-term outcomes of only a few weeks. Long-term studies in representative large animal models are crucial for translation into clinical success, especially for permanent stabilization of major defects such as disc herniation. An injectable chitosan carboxymethyl cellulose hydrogel scaffold loaded with ASCs was evaluated regarding its intraoperative handling, crosslinking kinetics, cell viability, fully-crosslinked viscoelasticity, and long-term therapeutic effects in an ovine model. Three IVDs per animal were damaged in 10 sheep. Subcutaneous adipose tissue was the source for autologous ASCs. Six weeks after IVD damage, two of the damaged IVDs were treated via ASC-loaded hydrogel injection. After 12 months following the implantation, IVD disc height and histological and cellular changes were assessed. This system was reliable and easy to handle intraoperatively. Over 12 months, IVD height was stabilized and degeneration progression significantly mitigated compared to untreated, damaged IVDs. Here we show for the first time in a large animal model that an injectable chitosan carboxymethyl cellulose hydrogel system with encapsulated ASCs is able to affect long-term stabilization of an injured IVD and significantly decrease degeneration processes as compared to controls.
Assuntos
Tecido Adiposo/citologia , Celulose/química , Quitosana/química , Hidrogéis/química , Injeções , Degeneração do Disco Intervertebral/terapia , Nanopartículas/química , Células-Tronco/citologia , Animais , Células Imobilizadas/citologia , Modelos Animais de Doenças , OvinosRESUMO
Our aim was to determine the impact of targeted blood pressure modifications on cerebral blood flow in ischemic moyamoya disease patients assessed by single-photon emission computed tomography (SPECT). From March to September 2018, we prospectively collected data of 154 moyamoya disease patients and selected 40 patients with ischemic moyamoya disease. All patients underwent in-hospital blood pressure monitoring to determine the mean arterial pressure baseline values. The study cohort was subdivided into two subgroups: (1) Group A or relative high blood pressure (RHBP) with an induced mean arterial pressure 10-20% higher than baseline and (2) Group B or relative low blood pressure (RLBP) including patients with mean arterial pressure 10-20% lower than baseline. All patients underwent initial SPECT study on admission-day, and on the following day, every subgroup underwent a second SPECT study under their respective targeted blood pressure values. In general, RHBP patients showed an increment in perfusion of 10.13% (SD 2.94%), whereas RLBP patients showed a reduction of perfusion of 12.19% (SD 2.68%). Cerebral blood flow of moyamoya disease patients is susceptible to small blood pressure changes, and cerebral autoregulation might be affected due to short dynamic blood pressure modifications.
Assuntos
Pressão Sanguínea/fisiologia , Circulação Cerebrovascular/fisiologia , Doença de Moyamoya/diagnóstico por imagem , Doença de Moyamoya/fisiopatologia , Tomografia Computadorizada de Emissão de Fóton Único/métodos , Adolescente , Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Adulto JovemRESUMO
BACKGROUND: The sitting position is favorable for microsurgical procedures applied to posterior midline pathologies in both the supra- and infratentorial regions. The dimensions of the microscope corpus affect the device's comfort and handling in the hands of the microneurosurgeon for such procedures. A shorter microscope corpus provides more favorable intraoperative ergonomics for surgical practice. METHODS: Evaluation of the most comfortable microscope for its application in microsurgical procedures in the sitting position as determined by ocular-corpus length. RESULTS: Six modern surgical microscopes were tested and evaluated regarding their ocular-corpus lengths and working distances: the Mitaka MM90, Zeiss Kinevo 900, Zeiss Pentero 900, Leica M530, Zeiss Neuro NC4, and Möller-Wedel Hi-R 1000. The ocular-corpus lengths vary between 270 and 380 mm. The Mitaka MM90 microscope has the shortest ocular-corpus length at 270 mm. CONCLUSION: The ocular-corpus length determines the predominant part of the lever arm, which affects the fatigue of the surgeon. By virtue of its short ocular-corpus length, the Mitaka MM90 is currently the most favorable microscope for microsurgical procedures using a sitting position.
RESUMO
OBJECTIVE: This study compares the mechanical stability and surgical usability of 2 locking plate systems (Kyon ALPS-20 and Synthes PIP-LCP system) for arthrodesis of the equine proximal interphalangeal joint (PIJ). MATERIAL AND METHODS: The experimental ex vivo study included 6 pairs of cadaver distal limbs (n = 12). All specimens were derived from Warmblood horses of various ages that were euthanized for non-orthopedic reasons. Of the 12 limbs collected, 3 left and 3 right distal limb specimens were randomly assigned to each system for implantation. Two abaxial 4.5-mm cortical screws were inserted transarticularly in all cases. Both systems were implanted according to the manufacturer's instructions with the plates placed centrally between the 2 transarticular screws. The ALPS-20 systems were implanted using Kyon B-6.4-mm monocortical locking screws in all positions. The LCP systems were implanted axially using 2 Synthes 5-mm locking screws in the proximal and distal positions, with a standard 4.5-mm cortical screw inserted in the middle position. All constructs underwent CT-scans after implantation and biomechanical testing to detect implant deformation. Uniaxial mechanical loading was applied via a servo-hydraulic test system at a test speed of 50 mm/s, up to a maximum displacement of 80 mm. The resulting load-displacement curves were used to calculate yield point, stiffness, and maximum force for each construct. The measured values were evaluated for statistical significance (p < 0.05) between the 2 plate systems via one-factor ANOVA (Tukey test). The statistical power was verified for yield force, stiffness, and maximum load. RESULTS: No statistically significant differences between the 2 preparation groups were calculated across all of the measured parameters (p > 0.05). The ALPS system implants showed no signs of deformation, either in the plates or the screws. In contrast, the LCP demonstrated visible deformation, which had already occurred at the time of implantation from the tightening of the middle screw, as well as during the subsequent testing of the implants. After biomechanical testing, deformations ranging between 3.1° and 7.0° were measured in 4 LCPs. A total implant failure was observed for 2 LCPs. CONCLUSION AND CLINICAL RELEVANCE: Both systems demonstrated comparable mechanical properties in the present study's ex vivo test model for equine PIJ arthrodesis. As such, the Kyon ALPS-20 may be a good alternative to the Synthes LCP for equine PIJ arthrodesis.
Assuntos
Artrodese/veterinária , Placas Ósseas/veterinária , Cavalos/cirurgia , Articulações/diagnóstico por imagem , Articulações/cirurgia , Análise de Variância , Animais , Artrodese/instrumentação , Artrodese/métodos , Artrodese/normas , Fenômenos Biomecânicos , Placas Ósseas/classificação , Parafusos Ósseos/veterinária , Cadáver , Distribuição Normal , Tomografia Computadorizada por Raios X/veterináriaRESUMO
BACKGROUND: Superficial temporal artery to middle cerebral artery (STA-MCA) bypass is a treatment option for hemodynamic insufficiency in the anterior cerebral circulation. Complications associated with extracranial-intracranial bypass surgeries are ischemic strokes caused by bypass failure, wound-healing disorders, and further issues from cerebrospinal fluid (CSF) leakage. CSF leakage can provide pathways for infection. It is well known in general neurosurgery that watertight closure of the dura mater is necessary to prevent such complications. OBJECTIVE: To provide a technical description of TachoSil dural reconstruction in standard STA-MCA bypasses and their follow-up analyses. METHODS: In this technical report with observational follow-up, the dura mater was closed partially by adaptive sutures, and the perforation site of the donor vessel was sealed with TachoSil. TachoSil is a collagen sponge covered with clotting factors that provides hemostatic and sealing effects. RESULTS: Our study included eight cases of standard STA-MCA bypasses that had been operated between July 2015 and September 2016. Follow-up examinations were completed for all patients at 1 month and 6 months after surgery. Duplex and Doppler ultrasound demonstrated regular bypass patency in all patients without increased flow velocity at the perforation sites, which is a possible sign of stenosis. No wound-healing disorders or CSF leakage occurred. No cerebrovascular stroke events were observed. CONCLUSION: Duraplasty with TachoSil enables the elastic reconstruction of the dura perforation gap in standard extracranial-intracranial bypass surgeries.