Crystal structure of the FERM-folded talin head reveals the determinants for integrin binding.

Binding of the intracellular adapter proteins talin and its cofactor, kindlin, to the integrin receptors induces integrin activation and clustering. These processes are essential for cell adhesion, migration, and organ development. Although the talin head, the integrin-binding segment in talin, possesses a typical FERM-domain sequence, a truncated form has been crystallized in an unexpected, elongated form. This form, however, lacks a C-terminal fragment and possesses reduced ß3-integrin binding. Here, we present a crystal structure of a full-length talin head in complex with the ß3-integrin tail. The structure reveals a compact FERM-like conformation and a tightly associated N-P-L-Y motif of ß3-integrin. A critical C-terminal poly-lysine motif mediates FERM interdomain contacts and assures the tight association with the ß3-integrin cytoplasmic segment. Removal of the poly-lysine motif or disrupting the FERM-folded configuration of the talin head significantly impairs integrin activation and clustering. Therefore, structural characterization of the FERM-folded active talin head provides fundamental understanding of the regulatory mechanism of integrin function.

The F1 loop of the talin head domain acts as a gatekeeper in integrin activation and clustering.

Integrin activation and clustering by talin are early steps of cell adhesion. Membrane-bound talin head domain and kindlin bind to the ß integrin cytoplasmic tail, cooperating to activate the heterodimeric integrin, and the talin head domain induces integrin clustering in the presence of Mn2+ Here we show that kindlin-1 can replace Mn2+ to mediate ß3 integrin clustering induced by the talin head, but not that induced by the F2-F3 fragment of talin. Integrin clustering mediated by kindlin-1 and the talin head was lost upon deletion of the flexible loop within the talin head F1 subdomain. Further mutagenesis identified hydrophobic and acidic motifs in the F1 loop responsible for ß3 integrin clustering. Modeling, computational and cysteine crosslinking studies showed direct and catalytic interactions of the acidic F1 loop motif with the juxtamembrane domains of α- and ß3-integrins, in order to activate the ß3 integrin heterodimer, further detailing the mechanism by which the talin-kindlin complex activates and clusters integrins. Moreover, the F1 loop interaction with the ß3 integrin tail required the newly identified compact FERM fold of the talin head, which positions the F1 loop next to the inner membrane clasp of the talin-bound integrin heterodimer.This article has an associated First Person interview with the first author of the paper.

Transglutaminase 2-specific coeliac disease autoantibodies induce morphological changes and signs of inflammation in the small-bowel mucosa of mice.

Coeliac disease is hallmarked by an abnormal immune reaction against ingested wheat-, rye- and barley-derived gluten and the presence of transglutaminase 2 (TG2)-targeted autoantibodies. The small-bowel mucosal damage characteristic of the disorder develops gradually from normal villus morphology to inflammation and finally to villus atrophy with crypt hyperplasia. Patients with early-stage coeliac disease have TG2-autoantibodies present in serum and small-intestinal mucosa and they may already suffer from abdominal symptoms before the development of villus atrophy. Previously, we have shown that intraperitoneal injections of coeliac patient-derived sera or purified immunoglobulin fraction into mice induce a condition mimicking early-stage coeliac disease. In the current study, we sought to establish whether recombinantly produced patient-derived TG2-targeted autoantibodies are by themselves sufficient for the development of such an experimentally induced condition in immune-compromised mice. Interestingly, mice injected with coeliac patient TG2-antibodies had altered small-intestinal mucosal morphology, increased lamina propria cellular infiltration and disease-specific autoantibodies deposited in the small bowel, but did not evince clinical features of the disease. Thus, coeliac patient-derived TG2-specific autoantibodies seem to be sufficient for the induction of subtle small-bowel mucosal alterations in mice, but the development of clinical features probably requires additional factors such as other antibody populations relevant in coeliac disease.

The Minor Capsid Protein VP11 of Thermophilic Bacteriophage P23-77 Facilitates Virus Assembly by Using Lipid-Protein Interactions.

UNLABELLED: Thermus thermophilus bacteriophage P23-77 is the type member of a new virus family of icosahedral, tailless, inner-membrane-containing double-stranded DNA (dsDNA) viruses infecting thermophilic bacteria and halophilic archaea. The viruses have a unique capsid architecture consisting of two major capsid proteins assembled in various building blocks. We analyzed the function of the minor capsid protein VP11, which is the third known capsid component in bacteriophage P23-77. Our findings show that VP11 is a dynamically elongated dimer with a predominantly α-helical secondary structure and high thermal stability. The high proportion of basic amino acids in the protein enables electrostatic interaction with negatively charged molecules, including nucleic acid and large unilamellar lipid vesicles (LUVs). The plausible biological function of VP11 is elucidated by demonstrating the interactions of VP11 with Thermus-derived LUVs and with the major capsid proteins by means of the dynamic-light-scattering technique. In particular, the major capsid protein VP17 was able to link VP11-complexed LUVs into larger particles, whereas the other P23-77 major capsid protein, VP16, was unable to link VP11-comlexed LUVs. Our results rule out a previously suggested penton function for VP11. Instead, the electrostatic membrane association of VP11 triggers the binding of the major capsid protein VP17, thus facilitating a controlled incorporation of the two different major protein species into the assembling capsid. IMPORTANCE: The study of thermophilic viruses with inner membranes provides valuable insights into the mechanisms used for stabilization and assembly of protein-lipid systems at high temperatures. Our results reveal a novel way by which an internal membrane and outer capsid shell are linked in a virus that uses two different major protein species for capsid assembly. We show that a positive protein charge is important in order to form electrostatic interactions with the lipid surface, thereby facilitating the incorporation of other capsid proteins on the membrane surface. This implies an alternative function for basic proteins present in the virions of other lipid-containing thermophilic viruses, whose proposed role in genome packaging is based on their capability to bind DNA. The unique minor capsid protein of bacteriophage P23-77 resembles in its characteristics the scaffolding proteins of tailed phages, though it constitutes a substantial part of the mature virion.

Switchavidin: reversible biotin-avidin-biotin bridges with high affinity and specificity.

Switchavidin is a chicken avidin mutant displaying reversible binding to biotin, an improved binding affinity toward conjugated biotin, and low nonspecific binding due to reduced surface charge. These properties make switchavidin an optimal tool in biosensor applications for the reversible immobilization of biotinylated proteins on biotinylated sensor surfaces. Furthermore, switchavidin opens novel possibilities for patterning, purification, and labeling.

Structural basis of CDNF interaction with the UPR regulator GRP78.

Cerebral dopamine neurotrophic factor (CDNF) is an unconventional neurotrophic factor that is a disease-modifying drug candidate for Parkinson's disease. CDNF has pleiotropic protective effects on stressed cells, but its mechanism of action remains incompletely understood. Here, we use state-of-the-art advanced structural techniques to resolve the structural basis of CDNF interaction with GRP78, the master regulator of the unfolded protein response (UPR) pathway. Subsequent binding studies confirm the obtained structural model of the complex, eventually revealing the interaction site of CDNF and GRP78. Finally, mutating the key residues of CDNF mediating its interaction with GRP78 not only results in impaired binding of CDNF but also abolishes the neuroprotective activity of CDNF-derived peptides in mesencephalic neuron cultures. These results suggest that the molecular interaction with GRP78 mediates the neuroprotective actions of CDNF and provide a structural basis for development of next generation CDNF-based therapeutic compounds against neurodegenerative diseases.

Modification of the loops in the ligand-binding site turns avidin into a steroid-binding protein.

BACKGROUND: Engineered proteins, with non-immunoglobulin scaffolds, have become an important alternative to antibodies in many biotechnical and therapeutic applications. When compared to antibodies, tailored proteins may provide advantageous properties such as a smaller size or a more stable structure. RESULTS: Avidin is a widely used protein in biomedicine and biotechnology. To tailor the binding properties of avidin, we have designed a sequence-randomized avidin library with mutagenesis focused at the loop area of the binding site. Selection from the generated library led to the isolation of a steroid-binding avidin mutant (sbAvd-1) showing micromolar affinity towards testosterone (Kd ~ 9 µM). Furthermore, a gene library based on the sbAvd-1 gene was created by randomizing the loop area between ß-strands 3 and 4. Phage display selection from this library led to the isolation of a steroid-binding protein with significantly decreased biotin binding affinity compared to sbAvd-1. Importantly, differential scanning calorimetry and analytical gel-filtration revealed that the high stability and the tetrameric structure were preserved in these engineered avidins. CONCLUSIONS: The high stability and structural properties of avidin make it an attractive molecule for the engineering of novel receptors. This methodology may allow the use of avidin as a universal scaffold in the development of novel receptors for small molecules.

Chimeric avidin shows stability against harsh chemical conditions--biochemical analysis and 3D structure.

Avidin and its bacterial analog streptavidin have been widely used in applications in life sciences. Recently, we described a highly thermostable engineered avidin, called chimeric avidin, which is a hybrid of avidin and avidin-related protein 4. Here, we report a protocol for pilot-scale production in E. coli and the X-ray structure of chimeric avidin. The ligand-binding properties of chimeric avidin were explored with isothermal titration calorimetry. We found chimeric avidin to be more stable against various harsh organic solvents at elevated temperatures compared to avidin and streptavidin. The properties of chimeric avidin make it a potential tool for new applications in biotechnology.

Bradavidin II from Bradyrhizobium japonicum: a new avidin-like biotin-binding protein.

A gene encoding an avidin-like protein was discovered in the genome of B. japonicum. The gene was cloned to an expression vector and a protein, named bradavidin II, was produced in E. coli. Bradavidin II has an identity of 20-30% and a similarity of 30-40% with previously discovered bradavidin and other avidin-like proteins. It has biochemical characteristics close to those of avidin and streptavidin and binds biotin tightly. In contrast to other tetrameric avidin-like proteins studied to date, bradavidin II has no tryptophan analogous to the W110 in avidin (W120 in streptavidin), thought to be one of the most essential residues for tight biotin-binding. Homology modeling suggests that a proline residue may function analogously to tryptophan in this particular position. Structural elements of bradavidin II such as an interface residue pattern or biotin contact residues could be used as such or transferred to engineered avidin forms to improve or create new tools for biotechnological applications.

Structural and functional characteristics of xenavidin, the first frog avidin from Xenopus tropicalis.

BACKGROUND: Avidins are proteins with extraordinarily high ligand-binding affinity, a property which is used in a wide array of life science applications. Even though useful for biotechnology and nanotechnology, the biological function of avidins is not fully understood. Here we structurally and functionally characterise a novel avidin named xenavidin, which is to our knowledge the first reported avidin from a frog. RESULTS: Xenavidin was identified from an EST sequence database for Xenopus tropicalis and produced in insect cells using a baculovirus expression system. The recombinant xenavidin was found to be homotetrameric based on gel filtration analysis. Biacore sensor analysis, fluorescently labelled biotin and radioactive biotin were used to evaluate the biotin-binding properties of xenavidin - it binds biotin with high affinity though less tightly than do chicken avidin and bacterial streptavidin. X-ray crystallography revealed structural conservation around the ligand-binding site, while some of the loop regions have a unique design. The location of structural water molecules at the entrance and/or within the ligand-binding site may have a role in determining the characteristic biotin-binding properties of xenavidin. CONCLUSION: The novel data reported here provide information about the biochemically and structurally important determinants of biotin binding. This information may facilitate the discovery of novel tools for biotechnology.

Host Cell Calpains Can Cleave Structural Proteins from the Enterovirus Polyprotein.

Enteroviruses are small RNA viruses that cause diseases with various symptoms ranging from mild to severe. Enterovirus proteins are translated as a single polyprotein, which is cleaved by viral proteases to release capsid and nonstructural proteins. Here, we show that also cellular calpains have a potential role in the processing of the enteroviral polyprotein. Using purified calpains 1 and 2 in an in vitro assay, we show that addition of calpains leads to an increase in the release of VP1 and VP3 capsid proteins from P1 of enterovirus B species, detected by western blotting. This was prevented with a calpain inhibitor and was dependent on optimal calcium concentration, especially for calpain 2. In addition, calpain cleavage at the VP3-VP1 interface was supported by a competition assay using a peptide containing the VP3-VP1 cleavage site. Moreover, a mass spectrometry analysis showed that calpains can cleave this same peptide at the VP3-VP1 interface, the cutting site being two amino acids aside from 3C's cutting site. Furthermore, we show that calpains cannot cleave between P1 and 2A. In conclusion, we show that cellular proteases, calpains, can cleave structural proteins from enterovirus polyprotein in vitro. Whether they assist polyprotein processing in infected cells remains to be shown.

Molecular features of steroid-binding antidins and their use for assaying serum progesterone.

Chicken avidin (Avd) and streptavidin from Streptomyces avidinii are extensively used in bionanotechnology due to their extremely tight binding to biotin (Kd ~ 10-15 M for chicken Avd). We previously reported engineered Avds known as antidins, which have micro- to nanomolar affinities for steroids, non-natural ligands of Avd. Here, we report the 2.8 Å X-ray structure of the sbAvd-2 (I117Y) antidin co-crystallized with progesterone. We describe the creation of new synthetic phage display libraries and report the experimental as well as computational binding analysis of progesterone-binding antidins. We introduce a next-generation antidin with 5 nM binding affinity for progesterone, and demonstrate the use of antidins for measuring progesterone in serum samples. Our data give insights on how to engineer and alter the binding preferences of Avds and to develop better molecular tools for modern bionanotechnological applications.

Intelectin 3 is dispensable for resistance against a mycobacterial infection in zebrafish (Danio rerio).

Tuberculosis is a multifactorial bacterial disease, which can be modeled in the zebrafish (Danio rerio). Abdominal cavity infection with Mycobacterium marinum, a close relative of Mycobacterium tuberculosis, leads to a granulomatous disease in adult zebrafish, which replicates the different phases of human tuberculosis, including primary infection, latency and spontaneous reactivation. Here, we have carried out a transcriptional analysis of zebrafish challenged with low-dose of M. marinum, and identified intelectin 3 (itln3) among the highly up-regulated genes. In order to clarify the in vivo significance of Itln3 in immunity, we created nonsense itln3 mutant zebrafish by CRISPR/Cas9 mutagenesis and analyzed the outcome of M. marinum infection in both zebrafish embryos and adult fish. The lack of functional itln3 did not affect survival or the mycobacterial burden in the zebrafish. Furthermore, embryonic survival was not affected when another mycobacterial challenge responsive intelectin, itln1, was silenced using morpholinos either in the WT or itln3 mutant fish. In addition, M. marinum infection in dexamethasone-treated adult zebrafish, which have lowered lymphocyte counts, resulted in similar bacterial burden in both WT fish and homozygous itln3 mutants. Collectively, although itln3 expression is induced upon M. marinum infection in zebrafish, it is dispensable for protective mycobacterial immune response.

Rational modification of ligand-binding preference of avidin by circular permutation and mutagenesis.

Chicken avidin is a key component used in a wide variety of biotechnological applications. Here we present a circularly permuted avidin (cpAvd4-->3) that lacks the loop between beta-strands 3 and 4. Importantly, the deletion of the loop has a positive effect on the binding of 4'-hydroxyazobenzene-2-carboxylic acid (HABA) to avidin. To increase the HABA affinity of cpAvd4-->3 even further, we mutated asparagine 118 on the bottom of the ligand-binding pocket to methionine, which simultaneously caused a significant drop in biotin-binding affinity. The X-ray structure of cpAvd4--> 3(N118M) allows an understanding of the effect of mutation to biotin-binding, whereas isothermal titration calorimetry revealed that the relative binding affinity of biotin and HABA had changed by over one billion-fold between wild-type avidin and cpAvd4-->3(N118M). To demonstrate the versatility of the cpAvd4-->3 construct, we have shown that it is possible to link cpAvd4-->3 and cpAvd5-->4 to form the dual-chain avidin called dcAvd2. These novel avidins might serve as a basis for the further development of self-organising nanoscale avidin building blocks.

Rhizavidin from Rhizobium etli: the first natural dimer in the avidin protein family.

Rhizobium etli CFN42 is a symbiotic nitrogen-fixing bacterium of the common bean Phaseolus vulgaris. The symbiotic plasmid p42d of R. etli comprises a gene encoding a putative (strept)avidin-like protein, named rhizavidin. The amino acid sequence identity of rhizavidin in relation to other known avidin-like proteins is 20-30%. The amino acid residues involved in the (strept)avidin-biotin interaction are well conserved in rhizavidin. The structural and functional properties of rhizavidin were carefully studied, and we found that rhizavidin shares characteristics with bradavidin, streptavidin and avidin. However, we found that it is the first naturally occurring dimeric protein in the avidin protein family, in contrast with tetrameric (strept)avidin and bradavidin. Moreover, it possesses a proline residue after a flexible loop (GGSG) in a position close to Trp-110 in avidin, which is an important biotin-binding residue. [3H]Biotin dissociation and ITC (isothermal titration calorimetry) experiments showed dimeric rhizavidin to be a high-affinity biotin-binding protein. Its thermal stability was lower than that of avidin; although similar to streptavidin, it was insensitive to proteinase K. The immunological cross-reactivity of rhizavidin was tested with human serum samples obtained from cancer patients exposed to (strept)avidin. No significant cross-reactivity was observed. The biodistribution of the protein was studied by SPECT (single-photon emission computed tomography) imaging in rats. Similarly to avidin, rhizavidin was observed to accumulate rapidly, mainly in the liver. Evidently, rhizavidin could be used as a complement to (strept)avidin in (strept)avidin-biotin technology.

New Coxsackievirus 2Apro and 3Cpro protease antibodies for virus detection and discovery of pathogenic mechanisms.

Enteroviruses (EVs), such as the Coxsackie B-viruses (CVBs), are common human pathogens, which can cause severe diseases including meningitis, myocarditis and neonatal sepsis. EVs encode two proteases (2Apro and 3Cpro), which perform the proteolytic cleavage of the CVB polyprotein and also cleave host cell proteins to facilitate viral replication. The 2Apro cause direct damage to the infected heart and tools to investigate 2Apro and 3Cpro expression may contribute new knowledge on virus-induced pathologies. Here, we developed new antibodies to CVB-encoded 2Apro and 3Cpro; Two monoclonal 2Apro antibodies and one 3Cpro antibody were produced. Using cells infected with selected viruses belonging to the EV A, B and C species and immunocytochemistry, we demonstrate that the 3Cpro antibody detects all of the EV species B (EV-B) viruses tested and that the 2Apro antibody detects all EV-B viruses apart from Echovirus 9. We furthermore show that the new antibodies work in Western blotting, immunocyto- and immunohistochemistry, and flow cytometry to detect CVBs. Confocal microscopy demonstrated the expression kinetics of 2Apro and 3Cpro, and revealed a preferential cytosolic localization of the proteases in CVB3 infected cells. In summary, the new antibodies detect proteases that belong to EV species B in cells and tissue using multiple applications.

Structure and characterization of a novel chicken biotin-binding protein A (BBP-A).

BACKGROUND: The chicken genome contains a BBP-A gene showing similar characteristics to avidin family genes. In a previous study we reported that the BBP-A gene may encode a biotin-binding protein due to the high sequence similarity with chicken avidin, especially at regions encoding residues known to be located at the ligand-binding site of avidin. RESULTS: Here, we expand the repertoire of known macromolecular biotin binders by reporting a novel biotin-binding protein A (BBP-A) from chicken. The BBP-A recombinant protein was expressed using two different expression systems and purified with affinity chromatography, biochemically characterized and two X-ray structures were solved - in complex with D-biotin (BTN) and in complex with D-biotin D-sulfoxide (BSO). The BBP-A protein binds free biotin with high, "streptavidin-like" affinity (Kd ~ 10-13 M), which is about 50 times lower than that of chicken avidin. Surprisingly, the affinity of BBP-A for BSO is even higher than the affinity for BTN. Furthermore, the solved structures of the BBP-A--BTN and BBP-A--BSO complexes, which share the fold with the members of the avidin and lipocalin protein families, are extremely similar to each other. CONCLUSION: BBP-A is an avidin-like protein having a beta-barrel fold and high affinity towards BTN. However, BBP-A differs from the other known members of the avidin protein family in thermal stability and immunological properties. BBP-A also has a unique ligand-binding property, the ability to bind BTN and BSO at comparable affinities. BBP-A may have use as a novel material in, e.g. modern bio(nano)technological applications.

Structural characterization of core-bradavidin in complex with biotin.

Bradavidin is a tetrameric biotin-binding protein similar to chicken avidin and bacterial streptavidin, and was originally cloned from the nitrogen-fixing bacteria Bradyrhizobium diazoefficiens. We have previously reported the crystal structure of the full-length, wild-type (wt) bradavidin with 138 amino acids, where the C-terminal residues Gly129-Lys138 ("Brad-tag") act as an intrinsic ligand (i.e. Gly129-Lys138 bind into the biotin-binding site of an adjacent subunit within the same tetramer) and has potential as an affinity tag for biotechnological purposes. Here, the X-ray structure of core-bradavidin lacking the C-terminal residues Gly114-Lys138, and hence missing the Brad-tag, was crystallized in complex with biotin at 1.60 Å resolution [PDB:4BBO]. We also report a homology model of rhodavidin, an avidin-like protein from Rhodopseudomonas palustris, and of an avidin-like protein from Bradyrhizobium sp. Ai1a-2, both of which have the Brad-tag sequence at their C-terminus. Moreover, core-bradavidin V1, an engineered variant of the original core-bradavidin, was also expressed at high levels in E. coli, as well as a double mutant (Cys39Ala and Cys69Ala) of core-bradavidin (CC mutant). Our data help us to further engineer the core-bradavidin-Brad-tag pair for biotechnological assays and chemical biology applications, and provide deeper insight into the biotin-binding mode of bradavidin.

Optimized production and purification of Coxsackievirus B1 vaccine and its preclinical evaluation in a mouse model.

Coxsackie B viruses are among the most common enteroviruses, causing a wide range of diseases. Recent studies have also suggested that they may contribute to the development of type 1 diabetes. Vaccination would provide an effective way to prevent CVB infections, and the objective of this study was to develop an efficient vaccine production protocol for the generation of novel CVB vaccines. Various steps in the production of a formalin-inactivated Coxsackievirus B1 (CVB1) vaccine were optimized including the Multiplicity Of Infection (MOI) used for virus amplification, virus cultivation time, type of cell growth medium, virus purification method and formulation of the purified virus. Safety and immunogenicity of the formalin inactivated CVB1 vaccine was characterized in a mouse model. Two of the developed methods were found to be optimal for virus purification: the first employed PEG-precipitation followed by gelatin-chromatography and sucrose cushion pelleting (three-step protocol), yielding 19-fold increase in virus concentration (0.06µg/cm2) as compared to gold standard method. The second method utilized tandem sucrose pelleting without a PEG precipitation step, yielding 83-fold increase in virus concentration (0.24µg/cm2), but it was more labor-intensive and cannot be efficiently scaled up. Both protocols provide radically higher virus yields compared with traditional virus purification protocols involving PEG-precipitation and sucrose gradient ultracentrifugation. Formalin inactivation of CVB1 produced a vaccine that induced a strong, virus-neutralizing antibody response in vaccinated mice, which protected against challenge with CVB1 virus. Altogether, these results provide valuable information for the development of new enterovirus vaccines.

Tetravalent single-chain avidin: from subunits to protein domains via circularly permuted avidins.

scAvd (single-chain avidin, where two dcAvd are joined in a single polypeptide chain), having four biotin-binding domains, was constructed by fusion of topologically modified avidin units. scAvd showed similar biotin binding and thermal stability properties as chicken avidin. The DNA construct encoding scAvd contains four circularly permuted avidin domains, plus short linkers connecting the four domains into a single polypeptide chain. In contrast with wild-type avidin, which contains four identical avidin monomers, scAvd enables each one of the four avidin domains to be independently modified by protein engineering. Therefore the scAvd scaffold can be used to construct spatially and stoichiometrically defined pseudotetrameric avidin molecules showing different domain characteristics. In addition, unmodified scAvd could be used as a fusion partner, since it provides a unique non-oligomeric structure, which is fully functional with four high-affinity biotin-binding sites. Furthermore, the subunit-to-domain strategy described in the present study could be applied to other proteins and protein complexes, facilitating the development of sophisticated protein tools for applications in nanotechnology and life sciences.