A Brief Review on the High-Energy Electromagnetic Radiation-Shielding Materials Based on Polymer Nanocomposites.

This paper revises the use of polymer nanocomposites to attenuate high-energy electromagnetic radiation (HE-EMR), such as gamma radiation. As known, high-energy radiation produces drastic damage not only in facilities or electronic devices but also to life and the environment. Among the different approaches to attenuate the HE-EMR, we consider the use of compounds with a high atomic number (Z), such as lead, but as known, lead is toxic. Therefore, different works have considered low-toxicity post-transitional metal-based compounds, such as bismuth. Additionally, nanosized particles have shown higher performance to attenuate HE-EMR than those that are micro-sized. On the other hand, materials with π-conjugated systems can also play a role in spreading the energy of electrons ejected as a consequence of the interaction of HE-EMR with matter, preventing the ionization and bond scission of polymers. The different effects produced by the interactions of the matter with HE-EMR are revised. The increase of the shielding properties of lightweight, flexible, and versatile materials such as polymer-based materials can be a contribution for developing technologies to obtain more efficient materials for preventing the damage produced for the HE-EMR in different industries where it is found.

Thermally Reduced Graphene Oxide/Thermoplastic Polyurethane Nanocomposites: Mechanical and Barrier Properties.

This work consists of studying the influence of two thermally reduced graphene oxides (TRGOs), containing oxygen levels of 15.8% and 8.9%, as fillers on the barrier properties of thermoplastic polyurethane (TPU) nanocomposites prepared by melt-mixing processes. The oxygen contents of the TRGOs were obtained by carrying out the thermal reduction of graphene oxide (GO) at 600 °C and 1000 °C, respectively. The presence and contents of oxygen in the TRGO samples were determined by XPS and their structural differences were determined by using X-ray diffraction analysis and Raman spectroscopy. In spite of the decrease of the elongation at break of the nanocomposites, the Young modulus was increased by up to 320% with the addition of TRGO. The barrier properties of the nanocomposites were enhanced as was evidenced by the decrease of the permeability to oxygen, which reached levels as low as -46.1%.

SEBS-Grafted Itaconic Acid as Compatibilizer for Elastomer Nanocomposites Based on BaTiO3 Particles.

Itaconic acid (IA) is an organic acid produced by the fermentation of sugars with aspergillus. It has been identified as one of the top 12 building-block chemicals. Here, we report the use of IA as a possible substitute to petroleum-based compatibilizers in polymer composite. We applied this study to thermoplastic elastomers based on styrene copolymers, since they are commonly used in blends and composites. Poly(styrene-b-ethylene-butylene-b-styrene) (SEBS) was grafted with 2.6 wt.% of itaconic acid (SEBS-g-IA) prepared by a reactive melt-mixing process, and was subsequently used to prepare composites filled with BaTiO3.). IA was successfully grafted as demonstrated by FTIR and XRD. SEBS-g-IA composites presented better mechanical properties, achieving an increase of Young modulus up to 80% compared with the neat polymer. This was ascribed to better dispersion and compatibility with the filler. Additionally, SEBS-g-IA showed increased dielectric permittivity, i.e., showed increased polarity, which indicates that it could potentially be used as a modifier for specialized polymers.