RESUMO
The needs both for increased experimental throughput and for in operando characterization of functional materials under increasingly realistic experimental conditions have emerged as major challenges across the whole of crystallography. A novel measurement scheme that allows multiplexed simultaneous measurements from multiple nearby sample volumes is presented. This new approach enables better measurement statistics or direct probing of heterogeneous structure, dynamics or elemental composition. To illustrate, the submicrometer precision that optical lithography provides has been exploited to create a multiplexed form of ultra-small-angle scattering based X-ray photon correlation spectroscopy (USAXS-XPCS) using micro-slit arrays fabricated by photolithography. Multiplexed USAXS-XPCS is applied to follow the equilibrium dynamics of a simple colloidal suspension. While the dependence of the relaxation time on momentum transfer, and its relationship with the diffusion constant and the static structure factor, follow previous findings, this measurements-in-parallel approach reduces the statistical uncertainties of this photon-starved technique to below those associated with the instrument resolution. More importantly, we note the potential of the multiplexed scheme to elucidate the response of different components of a heterogeneous sample under identical experimental conditions in simultaneous measurements. In the context of the X-ray synchrotron community, this scheme is, in principle, applicable to all in-line synchrotron techniques. Indeed, it has the potential to open a new paradigm for in operando characterization of heterogeneous functional materials, a situation that will be even further enhanced by the ongoing development of multi-bend achromat storage ring designs as the next evolution of large-scale X-ray synchrotron facilities around the world.
RESUMO
Transverse coherence of the x-ray beam from a bending magnet source was studied along multiple directions using a 2-D π/2 phase grating by measuring interferogram visibilities at different distances behind the grating. These measurements suggest that the preferred measuring orientation of a 2-D checkerboard grating is along the diagonal directions of the square blocks, where the interferograms have higher visibility and are not sensitive to the deviation of the duty cycle of the grating period. These observations are verified by thorough wavefront propagation simulations. The accuracy of the measured coherence values was also validated by the simulation and analytical results obtained from the source parameters. In addition, capability of the technique in probing spatially resolved local transverse coherence is demonstrated.
RESUMO
Molecular dynamics simulations in conjunction with finite element calculations are used to explore the conformational dynamics of a thermo-sensitive oligomer, namely poly(N-isopropylacrylamide) (PNIPAM), subjected to an ultra-fast heating-cooling cycle. Finite element (FE) calculations were used to predict the temperature profile resulting from laser-induced heating of the polymer-aqueous system. The heating rate (â¼0.6 K ps(-1)) deduced from FE calculations was used to heat an aqueous solution of PNIPAM consisting of 30 monomeric units (30-mer) from 285 K to 315 K. Non-equilibrium effects arising from the ultra-fast heating-cooling cycle results in a hysteresis during the coil-to-globule transition. The corresponding atomic scale conformations were characterized by monitoring the changes in the vibrational spectra, which provided a reliable metric to study the coil-to-globule transition in PNIPAM and vice-versa across the LCST. The vibrational spectra of bonds involving atoms from the oligomer backbone and the various side-groups (amide I, amide II, and the isopropyl group of PNIPAM) of the oligomers were analyzed to study the conformational changes in the oligomer corresponding to the observed hysteresis. The differences in the vibrational spectra calculated at various temperatures during heating and cooling cycles were used to understand the coil-to-globule and globule-to-coil transitions in the PNIPAM oligomer and identify the changes in the relative interactions between various atoms in the backbone and in the side groups of the oligomer with water. The shifts in the computed vibrational spectral peaks and the changes in the intensity of peaks for the different regions of PNIPAM, seen across the LCST during the heating cycle, are in good agreement with previous experimental studies. The changes in the radius of gyration (Rg) and vibrational spectra for amide I and amide II regions of PNIPAM suggest a clear coil-to-globule transition at â¼301 K during the heating cycle from 285 K to 315 K. During the heating cycle, a comparison of the vibrational spectra of isopropyl groups in PNIPAM at 285 K and 315 K suggests dehydration of the isopropyl moieties at 315 K. This implies that the oligomer-water interactions are dominant below the LCST whereas oligomer-oligomer interactions pre-dominate above the LCST. On the other hand, during the cooling cycle minor changes in the Rg and vibrational spectra of the PNIPAM oligomer in going from 315 K to 285 K indicate that the interactions between oligomer-oligomer and between the oligomer and water are less perturbed during the cooling cycle. Our simulations suggest that the observed hysteresis is a consequence of ultrafast heating-cooling kinetics, which allows insufficient relaxation times for the solvated oligomer.
Assuntos
Resinas Acrílicas/química , Polímeros/química , Vibração , Calefação , Cinética , Temperatura , Água/químicaRESUMO
Thermodynamic considerations based on the free energy of hydration, free energy of solvation and partition coefficient predictions of the monomer N-isopropyl-acrylamide (NIPAM) determined using various intermolecular potentials are used to elucidate the origin of hydrophobicity/hydrophilicity across the lower critical solution temperature (LCST). Thermodynamic properties are predicted for NIPAM using adaptive bias force-molecular dynamics and various popular force-fields (AMBER, OPLS-AA, CHARMM and GROMOS) at four different temperatures: below the LCST (275 K and 300 K) and above the LCST (310 K and 330 K). The effect of changes in the thermodynamic properties of the monomer NIPAM at various temperatures below and above LCST on the kinetics of conformational transition of thermo-sensitive polymers is discussed. Our findings provide encouraging prospects for understanding the LCST transition in the hydrogel poly-N-isopropylacrylamide which shows temperature-dependent conformational changes in part due to the complex interplay of hydrophilic/hydrophobic interactions.
RESUMO
Chemical and morphological changes induced by an X-ray photochemical reaction in tetrachloroauric solutions leading to Au(3+)-to-Au(0) reduction are monitored in real time by X-ray absorption spectroscopy and X-ray small angle scattering. Prior to metal precipitation, the intermediate state, also observed by other techniques, is unambiguously determined for the first time to be the reduction of Au(3+) to Au(1+), whose kinetics is strictly of the zeroth order. The morphological changes occur simultaneously in the solutions, that is, the gold complexes rearrange and aggregate, as unequivocally observed by the correlated changes in the Au L(3) emission and small angle scattering intensities. The experimental evidence indicates that the eventual metal precipitation is strongly influenced by the changing solution acidity under X-ray irradiation. Detailed local structure changes are also described.
RESUMO
Mammography arguably demands the highest fidelity of all x-ray imaging applications, with simultaneous requirements of exceedingly high spatial and contrast resolution. Continuing technical improvements of screen-film and digital mammography systems have led to substantial improvements in image quality, and therefore improvements in the performance of anti-scatter grids are required to keep pace with the improvements in other components of the imaging chain. The development of an air-core honeycomb (cellular) grid using x-ray lithography and electroforming techniques is described, and the production of a 60 mm x 60 mm section of grid is reported. A crossed grid was constructed with 25 microm copper septa, and a period of 550 microm. Monte Carlo and numerical simulation methods were used to analyze the theoretical performance of the fabricated grid, and comparisons with other grid systems (Lorad HTC and carbon fiber interspaced grids) were made over a range of grid ratios. The results demonstrate essentially equivalent performance in terms of contrast improvement factor (CIF) and Bucky factor (BF) between Cu and Au honeycomb grids and the Lorad HTC (itself a copper honeycomb grid). Gold septa improved both CIF and BF performance in higher kVp, higher scatter geometries. The selectivity of honeycomb grids was far better than for linear grids, with a factor of approximately 3.9 improvement at a grid ratio of 5.0. It is concluded that using the fabrication methods described, that practical honeycomb grid structures could be produced for use in mammographic imaging, and that a substantial improvement in scatter rejection would be achieved using these devices.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Mamografia/métodos , Estatística como Assunto/métodos , Computadores , Humanos , Mamografia/instrumentação , Método de Monte CarloRESUMO
The vibrational spectrum of water near a thermo-sensitive polymer poly(N-isopropylacrylamide) (PNIPAM) undergoing conformational transition through the lower critical solution temperature (LCST) is calculated using molecular dynamics simulations. The characteristic structural features observed at the atomic scale for these proximal water molecules in a solvated polymer chain while undergoing the conformational transition are strongly correlated to their vibrational densities of states. Comparison of the vibrational spectrum below LCST for the proximal water with the vibrational spectrum obtained for bulk water reveals a significant fraction of the hydrogen bonding between the proximal water molecules and the polymer side groups. Hydrogen-bonded bridges of water molecules are formed between two adjacent and alternate monomers. This network of hydrogen bonding results in formation of locally ordered water molecules at temperatures below the LCST. Analysis of the simulation trajectories confirms the presence of a quasi-stable solvation structure near the PNIPAM. The calculated vibrational spectra for proximal water above the LCST suggest significantly reduced hydrogen bonding with the polymer and indicate a reduction in the structural stability of proximal water around a collapsed polymer chain. Systematic trends in the observed peak intensities and frequency shifts at the low- and high-frequency ends of the spectrum can be correlated with the structural and dynamical changes of water molecules below and above the LCST transition, respectively, for various polymer chain lengths. The simulations reveal that, compared to bulk water, the libration bands are blue shifted and OH stretch bands red shifted for water in proximity to PNIPAM with 30 monomer units below the LCST. The simulations suggest that vibrational spectra can be used as a predictive tool for quantifying atomic-scale structural transitions in solvation of thermo-sensitive polymers such as PNIPAM.
RESUMO
Conformational transitions in thermo-sensitive polymers are critical in determining their functional properties. The atomistic origin of polymer collapse at the lower critical solution temperature (LCST) remains a fundamental and challenging problem in polymer science. Here, molecular dynamics simulations are used to establish the role of solvation dynamics and local ordering of water in inducing conformational transitions in isotactic-rich poly(N-isopropylacrylamide) (PNIPAM) oligomers when the temperature is changed through the LCST. Simulated atomic trajectories are used to identify stable conformations of the water-molecule network in the vicinity of polymer segments, as a function of the polymer chain length. The dynamics of the conformational evolution of the polymer chain within its surrounding water molecules is evaluated using various structural and dynamical correlation functions. Around the polymer, water forms cage-like structures with hydrogen bonds. Such structures form at temperatures both below and above the LCST. The structures formed at temperatures above LCST, however, are significantly different from those formed below LCST. Short oligomers consisting of 3, 5, and 10 monomer units (3-, 5-, and 10-mer), are characterized by significantly higher hydration level (water per monomer ~ 16). Increasing the temperature from 278 to 310 K does not perturb the structure of water around the short oligomers. In the case of 3-, 5-, and 10-mer, a distinct coil-to-globule transition was not observed when the temperature was raised from 278 to 310 K. For a PNIPAM polymer chain consisting of 30 monomeric units (30-mer), however, there exist significantly different conformations corresponding to two distinct temperature regimes. Below LCST, the water molecules in the first hydration layer (~12) around hydrophilic groups arrange themselves in a specific ordered manner by forming a hydrogen-bonded network with the polymer, resulting in a solvated polymer acting as hydrophilic. Above LCST, this arrangement of water is no longer stable, and the hydrophobic interactions become dominant, which contributes to the collapse of the polymer. Thus, this study provides atomic-scale insights into the role of solvation dynamics in inducing coil-to-globule phase transitions through the LCST for thermo-sensitive polymers like PNIPAM.
RESUMO
Soft-polymer based microparticles are currently being applied in many biomedical applications, ranging from bioimaging and bioassays to drug delivery carriers. As one class of soft-polymers, hydrogels are materials, which can be used for delivering drug cargoes and can be fabricated in controlled sizes. Among the various hydrogel-forming polymers, poly(ethylene glycol) (PEG) based hydrogel systems are widely used due to their negligible toxicity and limited immunogenic recognition. Physical and chemical properties of particles (i.e., particle size, shape, surface charge, and hydrophobicity) are known to play an important role in cell-particle recognition and response. To understand the role of physicochemical properties of PEG-based hydrogel structures on cells, it is important to have geometrically precise and uniform hydrogel structures. To fabricate geometrically uniform structures, we have employed electron beam lithography (EBL) and ultra-violet optical lithography (UVL) using PEG or PEG diacrylate polymers. These hydrogel structures have been characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), optical microscopy, and attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) confirming control of chemistry, size, and shape.