Temperature Induced Reversible Switching of the Magnetic Anisotropy in a Neodymium Complex Adsorbed on Graphite.

Controlling the magnetic anisotropy of molecular layers assembled on a surface is one of the challenges that needs to be addressed to create the next-generation spintronic devices. Recently, metal complexes that show a reversible solid-state switch of their magnetic anisotropy in response to physical stimuli, such as temperature and magnetic field, have been discovered. The complex Nd(trensal) (H3trensal = 2,2',2''-tris(salicylideneimino)triethylamine) is predicted to exhibit such property. An ultra-thin film of Nd(trensal) is deposited on highly ordered pyrolytic graphite as a proof-of-concept system to show that this property can be retained at the nanoscale on a layered material. By combining single crystal magnetometric measurements and synchrotron X-ray-based absorption techniques, supported by multiplet ligand field simulations based on the trigonal crystal field surrounding the lanthanide centre, it is demonstrated that changing the temperature reverses the magnetic anisotropy of an ordered film of Nd(trensal), thus opening significant perspectives for the realization of a novel family of temperature-controlled molecular spintronic devices.

Mixed-Sandwich Titanium(III) Qubits on Au(111): Electron Delocalization Ruled by Molecular Packing.

Organometallic sandwich complexes are versatile molecular systems that have been recently employed for single-molecule manipulation and spin sensing experiments. Among related organometallic compounds, the mixed-sandwich S = 1/2 complex (η8-cyclooctatetraene)(η5-cyclopentadienyl)titanium, here [CpTi(cot)], has attracted interest as a spin qubit because of the long coherence time. Here the structural and chemical properties of [CpTi(cot)] on Au(111) are investigated at the monolayer level by experimental and computational methods. Scanning tunneling microscopy suggests that adsorption occurs in two molecular orientations, lying and standing, with a 3:1 ratio. XPS data evidence that a fraction of the molecules undergo partial electron transfer to gold, while our computational analysis suggests that only the standing molecules experience charge delocalization toward the surface. Such a phenomenon depends on intermolecular interactions that stabilize the molecular packing in the monolayer. This orientation-dependent molecule-surface hybridization opens exciting perspectives for selective control of the molecule-substrate spin delocalization in hybrid interfaces.

Quantum dynamics of a single molecule magnet on superconducting Pb(111).

Magnetic materials interfaced with superconductors may reveal new physical phenomena with potential for quantum technologies. The use of molecules as magnetic components has already shown great promise, but the diversity of properties offered by the molecular realm remains largely unexplored. Here we investigate a submonolayer of tetrairon(III) propeller-shaped single molecule magnets deposited on a superconducting lead surface. This material combination reveals a strong influence of the superconductor on the spin dynamics of the single molecule magnet. It is shown that the superconducting transition to the condensate state switches the single molecule magnet from a blocked magnetization state to a resonant quantum tunnelling regime. Our results open perspectives to control single molecule magnetism via superconductors and to use single molecule magnets as local probes of the superconducting state.

Substrate mediated interaction of terbium(III) double-deckers with the TiO2(110) surface.

A terbium(iii)-bis(phthalocyaninato) neutral complex was deposited on the rutile TiO2(110) surface, and their interaction was studied by Scanning Tunneling Microscopy (STM) and X-ray Photoelectron Spectroscopy (XPS). It was found that the TiO2 rutile surface favours the adsorption of isolated molecules adopting a lying down configuration with the phthalocyanine planes tilted by about 30° when they lie in the first layer. The electronic and chemical properties of the molecules on the surface were studied by XPS as a function of the TiO2(110) substrate preparation. This study evidences that strong molecule-substrate interactions are present and a charge transfer process occurs from the molecule to the surface.

Stabilization of an Enantiopure Sub-monolayer of Helicene Radical Cations on a Au(111) Surface through Noncovalent Interactions.

In the past few years, the chirality and magnetism of molecules have received notable interest for the development of novel molecular devices. Chiral helicenes combine both these properties, and thus their nanostructuration is the first step toward developing new multifunctional devices. Here, we present a novel strategy to deposit a sub-monolayer of enantiopure thia[4]helicene radical cations on a pre-functionalized Au(111) substrate. This approach results in both the paramagnetic character and the chemical structure of these molecules being maintained at the nanoscale, as demonstrated by in-house characterizations. Furthermore, synchrotron-based X-ray natural circular dichroism confirmed that the handedness of the thia[4]helicene is preserved on the surface.

Sonocrystallization as an Efficient Way to Control the Size, Morphology, and Purity of Coordination Compound Microcrystallites: Application to a Single-Chain Magnet.

The size, morphology, and purity control of coordination compound powders is a key stage for their conversion into materials and devices. In particular, surface science techniques require highly pure bulk materials with a narrow crystallite-size distribution together with straightforward, scalable, and reproducible crystallization procedures. In this work we demonstrate how sonocrystallization, i.e. the application of ultrasound during the crystallization process, can afford very quickly powders made of crystallites with controlled size, morphology, and purity. We show that this process drastically diminishes the crystallite-size distribution (low polydispersity indexes, PDI) and crystallite aspect ratio. By comparing sonicated samples with samples obtained by various silent crystallization conditions, we unambiguously show that the improvement in the crystallite morphology and size distribution is not due to any thermal effect but to the sonication of the crystallizing media. The application of sonocrystallization on crystallization batches of single-chain magnets (SCMs) maintains the chemical integrity of the SCMs together with their original magnetic behavior. Moreover, luminescent measurements show that sonocrystallization induces an efficient micromixing that drastically enhances the purity of the SCM powders. We thus propose that sonocrystallization, which is already used on organic or MOF compounds, can be applied to (magnetic) coordination compounds to readily afford bulk powders for characterization or shaping techniques that require pure, morphology- and crystallite-size-controlled powder samples.

Synchrotron-based Mössbauer spectroscopy characterization of sublimated spin crossover molecules.

The spin crossover (SCO) efficiency of [57Fe(bpz)2(phen)] (where bpz = bis(pyrazol-1-yl)borohydride and phen = 9,10-phenantroline) molecules deposited on gold substrates was investigated by means of synchrotron Mössbauer spectroscopy. The spin transition was driven thermally, or light induced via the LIESST (light induced excited spin-state trapping) effect. Both sets of measurements show that, once deposited on a gold substrate, the efficiency of the SCO mechanism is modified with respect to molecules in the bulk phase. A correlation in the distribution of hyperfine parameters in the sublimated films, not evidenced so far in the bulk phase, is reported. This translates into geometrical distortions of the first coordination sphere of the iron atom that seem to correlate with the decreased spin conversion. The work reported clearly shows the potentiality of synchrotron Mössbauer spectroscopy for the characterization of nanostructured Fe-based SCO systems, thus resulting as a key tool in view of their applications in innovative nanoscale devices.

Chiral Supramolecular Nanotubes of Single-Chain Magnets.

We report a single-chain magnet (SCM) made of a terbium(III) building block and a nitronyl-nitroxide radical (NIT) functionalized with an aliphatic chain. This substitution is targeted to induce a long-range distortion of the polymeric chain and accordingly it gives rise to chains that are curled with almost 20 nm helical pitch. They self-organize as a chiral tubular superstructure made of 11 chains wound around each other. The supramolecular tubes have a 4.5 nm internal diameter. Overall, this forms a porous chiral network with almost 44 % porosity. Ab initio calculations highlight that each TbIII ion possesses high magnetic anisotropy. Indeed, notwithstanding the supramolecular arrangement each chain behaves as a SCM. Magnetic relaxation with both finite and infinite-size regimes is observed and confirms the validity of the Ising approximation. This is associated with quite strong coercive field and magnetic remanence (Hc =2400 Oe MR =2.09 µB at 0.5 K) for this class of compounds.

Tunable Spin-Superconductor Coupling of Spin 1/2 Vanadyl Phthalocyanine Molecules.

Atomic-scale magnetic moments in contact with superconductors host rich physics based on the emergence of Yu-Shiba-Rusinov (YSR) magnetic bound states within the superconducting condensate. Here, we focus on a magnetic bound state induced into Pb nanoislands by individual vanadyl phthalocyanine (VOPc) molecules deposited on the Pb surface. The VOPc molecule is characterized by a spin magnitude of 1/2 arising from a well-isolated singly occupied d xy-orbital and is a promising candidate for a molecular spin qubit with long coherence times. X-ray magnetic circular dichroism (XMCD) measurements show that the molecular spin remains unperturbed even for molecules directly deposited on the Pb surface. Scanning tunneling spectroscopy and density functional theory (DFT) calculations identify two adsorption geometries for this "asymmetric" molecule (i.e., absence of a horizontal symmetry plane): (a) oxygen pointing toward the vacuum with the Pc laying on the Pb, showing negligible spin-superconductor interaction, and (b) oxygen pointing toward the Pb, presenting an efficient interaction with the Pb and promoting a Yu-Shiba-Rusinov bound state. Additionally, we find that in the first case a YSR state can be induced smoothly by exerting mechanical force on the molecules with the scanning tunneling microscope (STM) tip. This allows the interaction strength to be tuned continuously from an isolated molecular spin case, through the quantum critical point (where the bound state energy is zero) and beyond. DFT indicates that a gradual bending of the VO bond relative to the Pc ligand plane promoted by the STM tip can modify the interaction in a continuously tunable manner. The ability to induce a tunable YSR state in the superconductor suggests the possibility of introducing coupled spins on superconductors with switchable interaction.

Self-Assembly of TbPc2 Single-Molecule Magnets on Surface through Multiple Hydrogen Bonding.

The complexation between 2-ureido-4[1H]-pyrimidinone (UPy) and 2,7-diamido-1,8-naphthyridine (NaPy) is used to promote the mild chemisorption of a UPy-functionalized terbium(III) double decker system on a silicon surface. The adopted strategy allows the single-molecule magnet behavior of the system to be maintained unaltered on the surface.

Low-Temperature Magnetic Force Microscopy on Single Molecule Magnet-Based Microarrays.

The magnetic properties of some single molecule magnets (SMM) on surfaces can be strongly modified by the molecular packing in nanometric films/aggregates or by interactions with the substrate, which affect the molecular orientation and geometry. Detailed investigations of the magnetism of thin SMM films and nanostructures are necessary for the development of spin-based molecular devices, however this task is challenged by the limited sensitivity of laboratory-based magnetometric techniques and often requires access to synchrotron light sources to perform surface sensitive X-ray magnetic circular dichroism (XMCD) investigations. Here we show that low-temperature magnetic force microscopy is an alternative powerful laboratory tool able to extract the field dependence of the magnetization and to identify areas of in-plane and perpendicular magnetic anisotropy in microarrays of the SMM terbium(III) bis-phthalocyaninato (TbPc2) neutral complex grown as nanosized films on SiO2 and perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA), and this is in agreement with data extracted from nonlocal XMCD measurements performed on homogeneous TbPc2/PTCDA films.

Proof of Principle: Immobilisation of Robust CuII3 TbIII -Macrocycles on Small, Suitably Pre-functionalised Gold Nanoparticles.

In a proof-of-principle study, a soluble macrocyclic single-molecule magnet (SMM) containing a CuII3 TbIII magnetic core was covalently grafted onto small gold nanoparticles pre-functionalised with carboxylate-terminated tethers. A modified microemulsion method allowed production of the small and monodisperse nanoparticles (approximately 3.5 nm in diameter) for the chemisorption of a large amount of intact macrocyclic complexes in the hybrid system.

Magnetic bistability in a submonolayer of sublimated Fe4 single-molecule magnets.

We demonstrate that Fe4 molecules can be deposited on gold by thermal sublimation in ultra-high vacuum with retention of single molecule magnet behavior. A magnetic hysteresis comparable to that found in bulk samples is indeed observed when a submonolayer film is studied by X-ray magnetic circular dichroism. Scanning tunneling microscopy evidences that Fe4 molecules are assembled in a two-dimensional lattice with short-range hexagonal order and coexist with a smaller contaminant. The presence of intact Fe4 molecules and the retention of their bistable magnetic behavior on the gold surface are supported by density functional theory calculations.

Urea vs. carbamate groups: a comparative study in a chiral C2 symmetric organogelator.

The effect of the replacement of molecular moieties (carbamates vs. urea) that drive self-assembly for two organogelators with an identical C(2) symmetric molecular structure is described. The main properties of the gels obtained from the urea-based organogelators are also discussed. The proposed organogelators are chiral molecules and are able to express chirality also at the supramolecular level, thus allowing the employment of electronic circular dichroism to gain insight into the molecular-scale structure of fibrillar aggregates. With the same technique, the behavior of enantiomeric mixtures of the urea-based organogelators was investigated, revealing the occurrence of different self-sorting phenomena at the molecular and supramolecular scale. The urea-based organogelators demonstrated to be more efficient gelators with respect to the carbamate-based analogues, showing a high gel-to-sol transition temperature (up to 66 °C) and a very low minimum gelling concentration (0.85 mg mL(-1)). This study is a starting point for a deeper investigation of structure/property relationships and, taking into account the peculiar behavior detected for the enantiomeric mixtures, also of self-sorting and molecular recognition phenomena.

Grafting single molecule magnets on gold nanoparticles.

The chemical synthesis and characterization of the first hybrid material composed by gold nanoparticles and single molecule magnets (SMMs) are described. Gold nanoparticles are functionalized via ligand exchange using a tetrairon(III) SMM containing two 1,2-dithiolane end groups. The grafting is evidenced by the shift of the plasmon resonance peak recorded with a UV-vis spectrometer, by the suppression of nuclear magnetic resonance signals, by X-ray photoemission spectroscopy peaks, and by transmission electron microscopy images. The latter evidence the formation of aggregates of nanoparticles as a consequence of the cross-linking ability of Fe4 through the two 1,2-dithiolane rings located on opposite sides of the metal core. The presence of intact Fe4 molecules is directly proven by synchrotron-based X-ray absorption spectroscopy and X-ray magnetic circular dichroism spectroscopy, while a detailed magnetic characterization, obtained using electron paramagnetic resonance and alternating-current susceptibility, confirms the persistence of SMM behavior in this new hybrid nanostructure.

Tetrairon(III) single-molecule magnet monolayers on gold: insights from ToF-SIMS and isotopic labeling.

To work as magnetic components in molecular electronics and spintronics, single-molecule magnets (SMMs) must be reliably interfaced with metals. The organization on gold of a Fe4 SMM carrying two acetyl-protected thiol groups has been studied by exploiting the surface sensitivity of time-of-flight secondary ion mass spectrometry (ToF-SIMS), additionally powered by the use of an isotopic labeling strategy. Deposition from millimolar dichloromethane solutions results in a higher surface coverage and better packed monolayers as compared with previous protocols based on more diluted solutions. Fe4 complexes are chemically tethered to the surface via a single Au-S bond while they still contain an intact SAc group.

Spin polarized current in chiral organic radical monolayers.

The chirality-induced spin selectivity (CISS) effect is the capability of chiral molecules to act as spin filters, i.e. to selectively sort flowing electrons based on their spin states. The application of this captivating phenomenon holds great promise in the realm of molecular spintronics, where the primary focus lies in advancing technologies based on chiral molecules to regulate the injection and coherence of spin-polarized currents. In this context, we conducted a study to explore the spin filtering capabilities of a monolayer of the thia-bridged triarylamine hetero[4]helicene radical cation chemisorbed on a metallic surface. Magnetic-conductive atomic force microscopy revealed efficient electron spin filtering at exceptionally low potentials. Furthermore, we constructed a spintronic device by incorporating a monolayer of these molecules in between two electrodes, obtaining an asymmetric magnetoresistance trend with signal inversion in accordance with the handedness of the enantiomer involved, indicative of the presence of the CISS effect. Our findings underscore the significance of thia[4]azahelicene organic radicals as promising candidates for the development of quantum information operations based on the CISS effect as a tool to control the molecular spin states.

(η8-Cyclooctatetraene)(η5-fluorenyl)titanium: a processable molecular spin qubit with optimized control of the molecule-substrate interface.

Depositing single paramagnetic molecules on surfaces for sensing and quantum computing applications requires subtle topological control. To overcome issues that are often encountered with sandwich metal complexes, we exploit here the low symmetry architecture and suitable vaporability of mixed-sandwich [FluTi(cot)], Flu = fluorenyl, cot = cyclooctatetraene, to drive submonolayer coverage and select an adsorption configuration that preserves the spin of molecules deposited on Au(111). Electron paramagnetic resonance spectroscopy and ab initio quantum computation evidence a d z 2 ground state that protects the spin from phonon-induced relaxation. Additionally, computed and measured spin coherence times exceed 10 µs despite the molecules being rich in hydrogen. A thorough submonolayer investigation by scanning tunneling microscopy, X-ray photoelectron and absorption spectrocopies and X-ray magnetic circular dichroism measurements supported by DFT calculations reveals that the most stable configuration, with the fluorenyl in contact with the metal surface, prevents titanium(iii) oxidation and spin delocalization to the surface. This is a necessary condition for single molecular spin qubit addressing on surfaces.

Assembling Fe4 single-molecule magnets on a TiO2 monolayer.

The decoration of technologically relevant surfaces, such as metal oxides, with Single-Molecule Magnets (SMMs) constitutes a persistent challenge for the integration of these molecular systems into novel technologies and, in particular, for the development of spintronic and quantum devices. We used UHV thermal sublimation to deposit tetrairon(III) propeller-shaped SMMs (Fe4) as a single layer on a TiO2 ultrathin film grown on Cu(001). The properties of the molecular deposit were studied using a multi-technique approach based on standard topographic and spectroscopic measurements, which demonstrated that molecules remain largely intact upon deposition. Ultralow temperature X-ray Absorption Spectroscopy (XAS) with linearly and circularly polarized light was further employed to evaluate both the molecular organization and the magnetic properties of the Fe4 monolayer. X-ray Natural Linear Dichroism (XNLD) and X-ray Magnetic Circular Dichroism (XMCD) showed that molecules in a monolayer display a preferential orientation and an open magnetic hysteresis with pronounced quantum tunnelling steps up to 900 mK. However, unexpected extra features in the XAS and XMCD spectra disclosed a minority fraction of altered molecules, suggesting that the TiO2 film may be chemically non-innocent. The observed persistence of SMM behaviour on a metal oxide thin film opens new possibilities for the development of SMM-based hybrid systems.

Nanoscale assembly of paramagnetic organic radicals on Au(111) single crystals.

The successful thin-film deposition of a pyrene-substituted nitronyl nitroxide radical under controlled conditions has been demonstrated. The electronic properties, chemical environment at the interface, and morphology of the thin films have been investigated by a multitechnique approach. Spectroscopic and morphological analyses indicate a Stranski-Krastanov growth mode and weak physisorption of molecules onto the metallic surface. Electron spin resonance (ESR) spectroscopy shows that evaporation processes and deposition do not affect the paramagnetic character of the molecules. Useful concepts for the engineering of new, purely organic-based magnets, which may open the way to fruitful exploitation of organic molecular-beam deposition for assembly on solid surfaces in view of future technological applications, are presented.