RESUMO
OBJECTIVE: Biomechanics represents the common final output through which all biopsychosocial constructs of back pain must pass, making it a rich target for phenotyping. To exploit this feature, several sites within the NIH Back Pain Consortium (BACPAC) have developed biomechanics measurement and phenotyping tools. The overall aims of this article were to: 1) provide a narrative review of biomechanics as a phenotyping tool; 2) describe the diverse array of tools and outcome measures that exist within BACPAC; and 3) highlight how leveraging these technologies with the other data collected within BACPAC could elucidate the relationship between biomechanics and other metrics used to characterize low back pain (LBP). METHODS: The narrative review highlights how biomechanical outcomes can discriminate between those with and without LBP, as well as among levels of severity of LBP. It also addresses how biomechanical outcomes track with functional improvements in LBP. Additionally, we present the clinical use case for biomechanical outcome measures that can be met via emerging technologies. RESULTS: To answer the need for measuring biomechanical performance, our "Results" section describes the spectrum of technologies that have been developed and are being used within BACPAC. CONCLUSION AND FUTURE DIRECTIONS: The outcome measures collected by these technologies will be an integral part of longitudinal and cross-sectional studies conducted in BACPAC. Linking these measures with other biopsychosocial data collected within BACPAC increases our potential to use biomechanics as a tool for understanding the mechanisms of LBP, phenotyping unique LBP subgroups, and matching these individuals with an appropriate treatment paradigm.
Assuntos
Dor Lombar , Humanos , Dor Lombar/diagnóstico , Estudos Transversais , Fenômenos Biomecânicos , Literatura de Revisão como AssuntoRESUMO
In 2019, the National Health Interview survey found that nearly 59% of adults reported pain some, most, or every day in the past 3 months, with 39% reporting back pain, making back pain the most prevalent source of pain, and a significant issue among adults. Often, identifying a direct, treatable cause for back pain is challenging, especially as it is often attributed to complex, multifaceted issues involving biological, psychological, and social components. Due to the difficulty in treating the true cause of chronic low back pain (cLBP), an over-reliance on opioid pain medications among cLBP patients has developed, which is associated with increased prevalence of opioid use disorder and increased risk of death. To combat the rise of opioid-related deaths, the National Institutes of Health (NIH) initiated the Helping to End Addiction Long-TermSM (HEAL) initiative, whose goal is to address the causes and treatment of opioid use disorder while also seeking to better understand, diagnose, and treat chronic pain. The NIH Back Pain Consortium (BACPAC) Research Program, a network of 14 funded entities, was launched as a part of the HEAL initiative to help address limitations surrounding the diagnosis and treatment of cLBP. This paper provides an overview of the BACPAC research program's goals and overall structure, and describes the harmonization efforts across the consortium, define its research agenda, and develop a collaborative project which utilizes the strengths of the network. The purpose of this paper is to serve as a blueprint for other consortia tasked with the advancement of pain related science.
Assuntos
Dor Crônica , Dor Lombar , Transtornos Relacionados ao Uso de Opioides , Adulto , Humanos , Projetos de Pesquisa , Analgésicos Opioides/uso terapêutico , Comitês Consultivos , Medição da Dor/métodos , Dor Crônica/epidemiologia , Dor Lombar/diagnóstico , Dor Lombar/terapia , Transtornos Relacionados ao Uso de Opioides/epidemiologia , Transtornos Relacionados ao Uso de Opioides/terapiaRESUMO
Cognitive dissonance refers to a state where two psychologically inconsistent thoughts, behaviours, or attitudes are held at the same time. The objective of this study was to explore the potential role of cognitive dissonance in biomechanical loading in the low back and neck. Seventeen participants underwent a laboratory experiment involving a precision lowering task. To establish a cognitive dissonance state (CDS), study participants were provided negative feedback on their performance running counter to a pre-established expectation that their performance was excellent. Dependent measures of interest were spinal loads in the cervical and lumbar spines, calculated via two electromyography-driven models. The CDS was associated with increases to peak spinal loads in the neck (11.1%, p < .05) and low back (2.2%, p < .05). A greater CDS magnitude was also associated with a greater spinal loading increase. Therefore, cognitive dissonance may represent a risk factor for low back/neck pain that has not been previously identified.Practitioner summary: Upon establishing a cognitive dissonance state in a group of participants, spinal loading in the cervical and lumbar spines were increased proportional to the magnitude of the cognitive dissonance reported. Therefore, cognitive dissonance may represent a risk factor for low back and neck pain that has not been previously identified.
Assuntos
Dor Lombar , Cervicalgia , Humanos , Cervicalgia/etiologia , Dissonância Cognitiva , Coluna Vertebral , Vértebras Lombares , Dor Lombar/etiologia , Eletromiografia , Fenômenos BiomecânicosRESUMO
STUDY DESIGN: Observational Study. OBJECTIVE: The primary objective was to determine if there were differences in spine structure measures between experimental postures and standard supine posture MRIs. METHODS: Thirty-four low back pain patients were included. MRI was taken in 6 experimental postures. The dependent measures includes sagittal view anterior (ADH), middle and posterior disc heights, thecal sac width, left/right foraminal height (FH). In the axial view: disc width, left and right foraminal height. Measures were done L3/L4, L4/L5 and L5/S1. Each subject served as their own control. Spine measurements in the experimental posture were compared to the same measures in the standard supine posture. RESULTS: 94% inter-observer reliability was seen. In the sagittal and axial view, 55 of the 108 and 11 of the 18 measures were significantly different. In sagittal view: a) ADH was significantly smaller in the sitting flexed posture by 2.50 mm ± 0.63 compared to the supine posture; b) ADH in sitting neutral posture was significantly smaller than the standard posture by 1.97 mm ± 0.86; c) sitting flexed posture showed that bilateral FH measures were significantly different; d) Bilateral FH was larger in the sitting neutral posture compared to the standard supine posture by 0.87 mm ± 0.17. CONCLUSIONS: This research quantifies the differences in spine structure measures that occur in various experimental postures. The additional information gathered from an upright MRI may correlate with symptoms leading to an accurate diagnosis and assist in future spine research.
Assuntos
Dor Lombar , Humanos , Dor Lombar/diagnóstico por imagem , Vértebras Lombares/diagnóstico por imagem , Imageamento por Ressonância Magnética , Postura , Reprodutibilidade dos TestesRESUMO
OBJECTIVE: The objective of this systematic review was to investigate the potential link between cognitive dissonance or its related constructs (emotional dissonance, emotional labor) and musculoskeletal disorders. BACKGROUND: The etiology of musculoskeletal disorders is complex, as pain arises from complex interactions among physical, social, and psychological stressors. It is possible that the psychological factor of cognitive dissonance may contribute to the etiology and/or maintenance of musculoskeletal disorders. METHOD: MEDLINE, APA PsycInfo, and CINAHL Plus databases were searched for studies investigating cognitive dissonance or its related constructs as exposure(s) of interest and outcomes related to physical health (including, but not limited to, musculoskeletal pain). Risk of bias was assessed using the Appraisal tool for Cross-Sectional Studies (AXIS) tool. RESULTS: The literature search yielded 7 studies eligible for inclusion. None of the included studies investigated cognitive dissonance directly but instead investigated dissonance-related constructs of emotional dissonance and emotional labor, in which a mismatch between required and felt emotions might elicit a psychological response consistent with the cognitive dissonance state. Moderate effect sizes between dissonance-related constructs and musculoskeletal disorders were noted (OR 1.25-2.22). CONCLUSION: There is likely a relationship between the two factors studied. However, as the included studies were cross-sectional in nature, a causal relationship between cognitive dissonance-related constructs and musculoskeletal disorders cannot be inferred. Therefore, future study proposing and validating a causal pathway between these variables is warranted. APPLICATION: Cognitive dissonance and its related constructs may serve as risk factors for musculoskeletal disorders that have not been considered previously.
RESUMO
The objective of this study was to evaluate three passive upper-extremity exoskeletons relative to a control condition. Twelve subjects performed an hour-long, simulated occupational task in a laboratory setting. Independent measures of exoskeleton, exertion height (overhead, head height), time, and their interactions were assessed. Dependent measures included changes in tissue oxygenation (ΔTSI) in the anterior deltoid and middle trapezius, peak resultant lumbar spine loading, and subjective discomfort in various body regions. A statistically significant reduction in ΔTSI between exoskeleton and control was only observed in one instance. Additionally, neither increases in spinal loading nor increases in subjective discomfort ratings were observed for any of the exoskeletons. Ultimately, the exoskeletons offered little to no physiological benefit for the conditions tested. However, the experimental task was not highly fatiguing to the subjects, denoted by low ΔTSI values across conditions. Results may vary for tasks requiring constant arm elevation or higher force demands. Practitioner summary This study quantified the benefits of upper-extremity exoskeletons using NIRS, complementary to prior studies using EMG. The exoskeletons offered little to no physiological benefit for the conditions tested. However, the experimental task was not highly fatiguing, and results may vary for an experimental task with greater demand on the shoulders. Abbreviations: WMSD: work-related musculoskeletal disorder; EMG: electromyography; NIRS: near-infrared spectroscopy; NIR: near-infrared; Hb: haemoglobin; Mb: myoglobin; TSI: tissue saturation index; ATT: adipose tissue thickness.
Assuntos
Exoesqueleto Energizado , Fenômenos Biomecânicos , Eletromiografia , Humanos , Músculo Esquelético , Ombro , Extremidade SuperiorRESUMO
The objective of this study was to test the feasibility of using a pair of wearable inertial measurement unit (IMU) sensors to accurately capture dynamic joint motion data during simulated occupational conditions. Eleven subjects (5 males and 6 females) performed repetitive neck, low-back, and shoulder motions simulating low- and high-difficulty occupational tasks in a laboratory setting. Kinematics for each of the 3 joints were measured via IMU sensors in addition to a "gold standard" passive marker optical motion capture system. The IMU accuracy was benchmarked relative to the optical motion capture system, and IMU sensitivity to low- and high-difficulty tasks was evaluated. The accuracy of the IMU sensors was found to be very good on average, but significant positional drift was observed in some trials. In addition, IMU measurements were shown to be sensitive to differences in task difficulty in all 3 joints (P < .05). These results demonstrate the feasibility for using wearable IMU sensors to capture kinematic exposures as potential indicators of occupational injury risk. Velocities and accelerations demonstrate the most potential for developing risk metrics since they are sensitive to task difficulty and less sensitive to drift than rotational position measurements.
Assuntos
Aceleração , Ombro , Fenômenos Biomecânicos , Feminino , Humanos , Masculino , Movimento (Física) , Amplitude de Movimento ArticularRESUMO
The objectives of this study were to quantify loads imposed upon the lumbar spine while lifting/lowering with one versus two hands and to create guidelines for one-handed lifting/lowering that are protective of the lower back. Thirty subjects (15 male, 15 female) performed one- and two-handed exertions in a laboratory, lifting from/lowering to 18 lift origins/destinations using medicine balls of varying masses. An electromyography-assisted model predicted peak spinal loads, which were related to tissue tolerance limits to create recommended weight limits. Compared to two-handed exertions, one-handed exertions resulted in decreased spinal compression and A/P shear loading (p < 0.001) but increased lateral shear (p < 0.001). Effects were likely driven by altered moment exposures attributable to altered torso kinematics. Differences between spinal loads for one- versus two-handed exertions were influenced by asymmetry (p < 0.001) and amplified at lower lift origin/destination heights, lower object masses and larger horizontal distances between the body and the load (p < 0.001). Practitioner summary: A biomechanical model was utilised to compare spinal loading for one versus two-handed lifting/lowering. Spinal loads in compression and A/P shear were reduced for one-handed relative to two-handed exertions. As current lifting guidelines cannot appropriately be applied to one-handed scenarios, one-handed weight limits protecting the lower back are presented herein. Abbreviations: LBD: low back disorder, EMG: electromyography, A/P: anterior/posterior, MVC: maximum voluntary contraction.
Assuntos
Mãos , Remoção , Dor Lombar/prevenção & controle , Vértebras Lombares/fisiologia , Doenças Musculoesqueléticas/prevenção & controle , Postura , Adulto , Fenômenos Biomecânicos , Eletromiografia , Feminino , Humanos , Masculino , Análise e Desempenho de TarefasRESUMO
BACKGROUND: Low back pain (LBP) is a common and costly problem throughout the United States. To achieve a greater understanding of the occupational risk factors, the National Institute for Occupational Safety and Health (NIOSH) funded a low back health effects consortium, which performed several surveillance studies throughout the United States. This study combines data from the consortium research groups resulting in a data set with nearly 2000 workers in various regions of the country. The purpose of this paper is to examine prevalence and personal risk factors of low back health effects among these workers. METHODS: There were three common questions regarding history of low back health effects in the past 12 months including 1) have you had LBP lasting 7 days, 2) have you sought medical care for LBP, and 3) have you taken time off work due to LBP. The questionnaire included demographic questions. There were five data collections institutions or sites including NIOSH, Ohio State University, University of Wisconsin-Milwaukee, Texas A&M University, and University of Utah. RESULTS: The 12-month period prevalence of low back pain lasting 7 days, seeking medical care, and lost time due to LBP were 25, 14 and 10%, respectively. There were no statistically significant differences in gender, age or weight between cases and non-cases for any prevalence measure. The height of workers was significantly greater in the cases compared to non-cases for all three prevalence definitions. There were significant differences among the sites on the prevalence of seeking medical care for LBP and lost time due to LBP. The Ohio State University had significantly higher prevalence rates for seeking medical care and lost time due to LBP than University of Wisconsin, University of Utah, or Texas A&M University. CONCLUSION: LBP, the least severe low back health effect studied, had the highest prevalence (25%) and lost time due to LBP, the most severe low back health effect studied, had the lowest prevalence (10%) among nearly 2000 US manual material handling workers. There was a significant site or regional influence in prevalence rates for seeking medical care and lost time due to LBP.
Assuntos
Absenteísmo , Dor Lombar/epidemiologia , Doenças Profissionais/epidemiologia , Aceitação pelo Paciente de Cuidados de Saúde/estatística & dados numéricos , Adulto , Estudos Transversais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Prevalência , Fatores de Risco , Inquéritos e Questionários , Estados Unidos/epidemiologia , Adulto JovemRESUMO
Objective Develop a coactivation index for the neck and test its effectiveness with complex dynamic head motions. Background Studies describing coactivation for the cervical spine are sparse in the literature. Of those in existence, they were either limited to a priori definitions of agonist/antagonist activity that limited the testing to sagittal and lateral planes or consisted of isometric exertions. Multiplanar movements would allow for a more realistic understanding of naturalistic movements in the cervical spine and propensity for neck pain. However, a gap in the literature exists in which a method to describe coactivation during complex dynamic motions does not exist for the cervical spine. Methods An electromyography-based coactivation index was developed for the cervical spine based on previously tested methodology used on the lumbar spine without a high-end model and tested using a series of different postures and speeds. Results Complex motions involving twisting (i.e., flexion and twisting) and higher speed had higher magnitudes of coactivation than uniplanar motions in the sagittal or lateral plane, which was expected. The coupled motion of flexion and twisting showed four to five times higher coactivation than uniplanar (sagittal or lateral) movements. Conclusion The coactivation index developed accommodates multiplanar, naturalistic movements. Testing of the index showed that motions requiring higher degrees of head control had higher effort due to coactivation, which was expected. Application Overall, this coactivation index may be utilized to understand the neuromuscular effort of various tasks in the cervical spine.
Assuntos
Vértebras Cervicais/fisiologia , Eletromiografia/métodos , Músculos do Pescoço/fisiologia , Cervicalgia/fisiopatologia , Adulto , Fenômenos Biomecânicos , Feminino , Humanos , Masculino , Adulto JovemRESUMO
Though biomechanically determined guidelines exist for lifting, existing recommendations for pushing and pulling were developed using a psychophysical approach. The current study aimed to establish objective hand force limits based on the results of a biomechanical assessment of the forces on the lumbar spine during occupational pushing and pulling activities. Sixty-two subjects performed pushing and pulling tasks in a laboratory setting. An electromyography-assisted biomechanical model estimated spinal loads, while hand force and turning torque were measured via hand transducers. Mixed modelling techniques correlated spinal load with hand force or torque throughout a wide range of exposures in order to develop biomechanically determined hand force and torque limits. Exertion type, exertion direction, handle height and their interactions significantly influenced dependent measures of spinal load, hand force and turning torque. The biomechanically determined guidelines presented herein are up to 30% lower than comparable psychophysically derived limits and particularly more protective for straight pushing. Practitioner Summary: This study utilises a biomechanical model to develop objective biomechanically determined push/pull risk limits assessed via hand forces and turning torque. These limits can be up to 30% lower than existing psychophysically determined pushing and pulling recommendations. Practitioners should consider implementing these guidelines in both risk assessment and workplace design moving forward.
Assuntos
Mãos/fisiologia , Vértebras Lombares/fisiologia , Análise e Desempenho de Tarefas , Suporte de Carga/fisiologia , Trabalho/fisiologia , Adulto , Fenômenos Biomecânicos , Eletromiografia , Feminino , Humanos , Região Lombossacral/fisiologia , Masculino , Músculo Esquelético/fisiologia , Doenças Musculoesqueléticas/etiologia , Doenças Profissionais/etiologia , Esforço Físico/fisiologia , Fatores de Proteção , Torque , Adulto JovemRESUMO
The objective of this study was to develop and test an EMG-based coactivation index and compare it to a coactivation index defined by a biologically assisted lumbar spine model to differentiate between tasks. The purpose was to provide a universal approach to assess coactivation of a multi-muscle system when a computational model is not accessible. The EMG-based index developed utilised anthropometric-defined muscle characteristics driven by torso kinematics and EMG. Muscles were classified as agonists/antagonists based upon 'simulated' moments of the muscles relative to the total 'simulated' moment. Different tasks were used to test the range of the index including lifting, pushing and Valsalva. Results showed that the EMG-based index was comparable to the index defined by a biologically assisted model (r2 = 0.78). Overall, the EMG-based index provides a universal, usable method to assess the neuromuscular effort associated with coactivation for complex dynamic tasks when the benefit of a biomechanical model is not available. Practitioner Summary: A universal coactivation index for the lumbar spine was developed to assess complex dynamic tasks. This method was validated relative to a model-based index for use when a high-end computational model is not available. Its simplicity allows for fewer inputs and usability for assessment of task ergonomics and rehabilitation.
Assuntos
Modelos Biológicos , Contração Muscular , Músculo Esquelético/fisiologia , Músculos Abdominais Oblíquos/fisiologia , Adulto , Fenômenos Biomecânicos/fisiologia , Eletromiografia , Feminino , Humanos , Remoção , Região Lombossacral , Masculino , Músculos Paraespinais/fisiologia , Reto do Abdome/fisiologia , Músculos Superficiais do Dorso/fisiologia , Manobra de Valsalva/fisiologia , Adulto JovemRESUMO
Purpose To determine the repeatability of magnetic resonance (MR) elastography-derived shear stiffness measurements of the intervertebral disc (IVD) taken throughout the day and their relationship with IVD degeneration and subject age. Materials and Methods In a cross-sectional study, in vivo lumbar MR elastography was performed once in the morning and once in the afternoon in 47 subjects without current low back pain (IVDs = 230; age range, 20-71 years) after obtaining written consent under approval of the institutional review board. The Pfirrmann degeneration grade and MR elastography-derived shear stiffness of the nucleus pulposus and annulus fibrosus regions of all lumbar IVDs were assessed by means of principal frequency analysis. One-way analysis of variance, paired t tests, concordance and Bland-Altman tests, and Pearson correlations were used to evaluate degeneration, diurnal changes, repeatability, and age effects, respectively. Results There were no significant differences between morning and afternoon shear stiffness across all levels and there was very good technical repeatability between the morning and afternoon imaging results for both nucleus pulposus (R = 0.92) and annulus fibrosus (R = 0.83) regions. There was a significant increase in both nucleus pulposus and annulus fibrosus MR elastography-derived shear stiffness with increasing Pfirrmann degeneration grade (nucleus pulposus grade 1, 12.5 kPa ± 1.3; grade 5, 16.5 kPa ± 2.1; annulus fibrosus grade 1, 90.4 kPa ± 9.3; grade 5, 120.1 kPa ± 15.4), and there were weak correlations between shear stiffness and age across all levels (R ≤ 0.32). Conclusion Our results demonstrate that MR elastography-derived shear stiffness measurements are highly repeatable, weakly correlate with age, and increase with advancing IVD degeneration. These results suggest that MR elastography-derived shear stiffness may provide an objective biomarker of the IVD degeneration process. © RSNA, 2017 Online supplemental material is available for this article.
Assuntos
Técnicas de Imagem por Elasticidade/métodos , Degeneração do Disco Intervertebral/diagnóstico por imagem , Disco Intervertebral/diagnóstico por imagem , Imageamento por Ressonância Magnética/métodos , Adulto , Idoso , Biomarcadores , Estudos Transversais , Humanos , Interpretação de Imagem Assistida por Computador , Disco Intervertebral/fisiopatologia , Degeneração do Disco Intervertebral/fisiopatologia , Pessoa de Meia-Idade , Adulto JovemRESUMO
Early biomechanical spine models represented the trunk muscles as straight-line approximations. Later models have endeavoured to accurately represent muscle curvature around the torso. However, only a few studies have systematically examined various techniques and the logic underlying curved muscle models. The objective of this review was to systematically categorise curved muscle representation techniques and compare the underlying logic in biomechanical models of the spine. Thirty-five studies met our selection criteria. The most common technique of curved muscle path was the 'via-point' method. Curved muscle geometry was commonly developed from MRI/CT database and cadaveric dissections, and optimisation/inverse dynamics models were typically used to estimate muscle forces. Several models have attempted to validate their results by comparing their approach with previous studies, but it could not validate of specific tasks. For future needs, personalised muscle geometry, and person- or task-specific validation of curved muscle models would be necessary to improve model fidelity. Practitioner Summary: The logic underlying the curved muscle representations in spine models is still poorly understood. This literature review systematically categorised different approaches and evaluated their underlying logic. The findings could direct future development of curved muscle models to have a better understanding of the biomechanical causal pathways of spine disorders.
Assuntos
Músculos do Dorso/anatomia & histologia , Modelos Anatômicos , Fenômenos Biomecânicos , Humanos , Tronco/anatomia & histologiaRESUMO
The objective of this study was to determine how simulated manual wheelchair pushing influences biomechanical loading to the lumbar spine and shoulders. Sixty-two subjects performed simulated wheelchair pushing and turning in a laboratory. An electromyography-assisted biomechanical model was used to estimate spinal loads. Moments at the shoulder joint, external hand forces and net turning torque were also assessed. Multiple linear regression techniques were employed to develop biomechanically based wheelchair pushing guidelines relating resultant hand force or net torque to spinal load. Male subjects experienced significantly greater spinal loading (p < 0.01), and spine loads were also increased for wheelchair turning compared to straight wheelchair pushing (p < 0.001). Biomechanically determined maximum acceptable resultant hand forces were 17-18% lower than psychophysically determined limits. We conclude that manual wheelchair pushing and turning can pose biomechanical risk to the lumbar spine and shoulders. Psychophysically determined maximum acceptable push forces do not appear to be protective enough of this biomechanical risk. Practitioner Summary: This laboratory study investigated biomechanical risk to the low back and shoulders during simulated wheelchair pushing. Manual wheelchair pushing posed biomechanical risk to the lumbar spine (in compression and A/P shear) and to the shoulders. Biomechanically determined wheelchair pushing thresholds are presented and are more protective than the closest psychophysically determined equivalents.
Assuntos
Mãos/fisiologia , Vértebras Lombares/fisiologia , Região Lombossacral/fisiologia , Ombro/fisiologia , Cadeiras de Rodas , Adulto , Fenômenos Biomecânicos , Eletromiografia , Ergonomia , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Músculo Esquelético/fisiologia , Articulação do Ombro/fisiologia , Torque , Adulto JovemRESUMO
The biomechanical loading on the lumbar spine was assessed as 12 female nurses applied and removed slings under two patients of differing weights (54 and 100 kg), using two work methods, and while working at three bed heights (56, 71, 93 cm). Three-dimensional spine loads at the L2/L3, L3/L4, L4/L5 and L5/S1 disc levels were measured using a validated EMG-assisted biomechanical model. Anterior/posterior (A/P) shear loading at the L5/S1 level consistently exceeded the tolerance threshold limit for disc failure. The peak compression values exceeded the 3400 N tolerance threshold for several participants when placing the sling under the 100-kg patient. In general, working from both sides of the bed generated slightly higher A/P shear loading than the one-sided method. Raising the bed significantly decreased compression and A/P shear forces. Therefore, raising the bed to at least the nurse's knuckle height is recommended when applying and removing patient slings. Practitioners Summary: We investigated the spine loading associated with placing and removing slings used for the mechanised lifting of patients. Peak compression and anterior shear forces exceeded recognised thresholds when placing slings underneath heavier patients. Raising the bed to at least knuckle level helps mitigate these spinal loads.
Assuntos
Vértebras Lombares/fisiologia , Movimentação e Reposicionamento de Pacientes/métodos , Suporte de Carga/fisiologia , Adulto , Leitos , Fenômenos Biomecânicos , Peso Corporal , Eletromiografia , Feminino , Humanos , Movimentação e Reposicionamento de Pacientes/instrumentação , Adulto JovemRESUMO
OBJECTIVE: The objective of this mini-review is to examine a subset of literature that demonstrates multiple interactions between mechanics and biology within the spine and propose how incorporation of these mechano-biologic interactions can be applied to improve the conceptual understanding of tissue tolerances. BACKGROUND: Low back pain represents a major musculoskeletal problem in the workplace. Traditional biomechanical assessments have employed tissue tolerances as an approach for reducing workplace injuries; however, development of more universal biologically sensitive tolerances requires incorporation of mechano-biologic interactions. METHODS: A focused literature review addressing the interactions between mechanical loading and biology in the spine. RESULTS: Mechanical loads applied to the body are distributed across all spatial scales from the body to the tissues to the cells. These mechanical loads regulate cellular metabolism and over time can lead to tissue strengthening or weakening. Mechanical loading also interacts with the biologic environment (e.g., tissue inflammation, nerve sensitization) to influence the perception of pain, thereby changing the risk of experiencing pain. Biologic tissues also exhibit time-dependent changes in mechanical behaviors that occur throughout the day and with disease, suggesting tissue tolerances are time dependent. CONCLUSION: Incorporating mechano-biologic interactions into the traditional tissue tolerance paradigm through describing tissue tolerances as a function of multiple factors (e.g., preexisting risk factors, underlying pathology, and time) may lead to the development of tissue tolerances that are more representative of the in vivo situation. APPLICATION: Efforts must work toward incorporating biological concepts into tissue tolerances in order to improve risk assessment tools.
Assuntos
Fenômenos Biomecânicos/fisiologia , Dor Lombar/fisiopatologia , Coluna Vertebral/fisiologia , HumanosRESUMO
PURPOSE: The purpose of this study was to assess low back functional health among a group of nurses with a history of low back pain symptoms in a university hospital using a direct measure of low back functional performance and compare to traditional low back disability and pain questionnaires. METHODS: Fifty-two nurses and patient care associates volunteered for the study. The clinical lumbar motion monitor (LMM) was used to directly measure low back functional performance. The participants performed a series of standard tasks involving trunk flexion and extension at different asymmetries. The LMM measures the motion signature of the participant (range of motion, velocity and acceleration) in all three planes of the body. The clinical LMM evaluation documented objective assessment of low back function normalized for age and gender. The Oswestry Disability Index (ODI) was used to evaluate self-reported disability and the McGill Pain Questionnaire visual analog scale assessed pain symptom. RESULTS: The average functional performance probability was 0.49 with a standard deviation of 0.29, indicating that on average the functional performance was impaired. The average ODI score was 13.4 with a standard deviation of 11.6. The correlation between the functional performance probability and ODI was 0.046 (not statistically significant). CONCLUSIONS: The clinical LMM functional performance measure provides a direct measure of trunk function. The low correlation between the ODI and clinical LMM functional performance probability indicates that the direct functional performance measure adds another component to our understanding of low back health or impairment that traditional questionnaires lack.
Assuntos
Avaliação da Deficiência , Dor Lombar/fisiopatologia , Cuidados de Enfermagem , Saúde Ocupacional , Traumatismos Ocupacionais/complicações , Amplitude de Movimento Articular/fisiologia , Adulto , Estudos Transversais , Feminino , Humanos , Dor Lombar/etiologia , Vértebras Lombares/fisiopatologia , Masculino , Pessoa de Meia-Idade , Medição da Dor , Medição de Risco , Perfil de Impacto da Doença , Inquéritos e Questionários , Desempenho ProfissionalRESUMO
Several factors can impact lumbosacral loads during lifting, including weight knowledge and weight magnitude. However, interaction between them has never been tested. This study investigated the interaction effect of these variables on lumbosacral forces and moments. Participants performed symmetrical lifts using three different weights. Weight knowledge involved known and unknown weight conditions. A biologically assisted dynamic model was used to calculate spinal loading parameters. Weight impacted all variables, while knowledge impacted only compression, by a moderate amount (5%), and spinal moments. Lifting a lightweight resulted in a difference of 16% and 7.2% between knowledge conditions for compression and anterior-posterior shear forces, respectively, compared with a negligible difference of < 1% when lifting a heavy weight. Increased spinal loading with light unknown weight can be attributed to increased muscular co-contraction. Weight knowledge is important to consider at low weight levels as it can increase tissue loading to values equivalent to lifting a heavier weight.
Assuntos
Remoção , Região Lombossacral/fisiologia , Análise e Desempenho de Tarefas , Percepção de Peso , Suporte de Carga , Adulto , Feminino , Voluntários Saudáveis , Humanos , Masculino , Contração Muscular , Coluna Vertebral/fisiologiaRESUMO
The objective of this study was to identify biomechanical measures that can distinguish texting distraction in a laboratory-simulated driving environment. The goal would be to use this information to provide an intervention for risky driving behaviour. Sixteen subjects participated in this study. Three independent variables were tested: task (texting, visual targeting, weighted and non-weighted movements), task direction (front and side) and task distance (close and far). Dependent variables consisted of biomechanical moments, head displacement and the length of time to complete each task. Results revealed that the time to complete each task was higher for texting compared to other tasks. Peak moments during texting were only distinguishable from visual targeting. Peak head displacement and cumulative biomechanical exposure measures indicated that texting can be distinguished from other tasks. Therefore, it may be useful to take into account both temporal and biomechanical measures when considering warning systems to detect texting distraction.