RESUMO
The present study investigates the possible use of manganese (Mn)-based liposomal formulations for diagnostic applications in imaging techniques such as magnetic resonance imaging (MRI), with the aim of overcoming the toxicity limitations associated with the use of free Mn2+. Specifically, anionic liposomes carrying two model Mn(II)-based compounds, MnCl2 (MC) and Mn(HMTA) (MH), were prepared and characterised in terms of morphology, size, loading capacity, and in vitro activity. Homogeneous dispersions characterised mainly by unilamellar vesicles were obtained; furthermore, no differences in size and morphology were detected between unloaded and Mn-loaded vesicles. The encapsulation efficiency of MC and MH was evaluated on extruded liposomes by means of ICP-OES analysis. The obtained results showed that both MC and MH are almost completely retained by the lipid portion of liposomes (LPs), with encapsulation efficiencies of 99.7% for MC and 98.8% for MH. The magnetic imaging properties of the produced liposomal formulations were investigated for application in a potential preclinical scenario by collecting magnetic resonance images of a phantom designed to compare the paramagnetic contrast properties of free MC and MH compounds and the corresponding manganese-containing liposome dispersions. It was found that both LP-MC and LP-MH at low concentrations (0.5 mM) show better contrast (contrast-to-noise ratios of 194 and 209, respectively) than solutions containing free Mn at the same concentrations (117 and 134, respectively) and are safe to use on human cells at the selected dose. Taken together, the results of this comparative analysis suggest that these liposome-containing Mn compounds might be suitable for diagnostic purposes.
Assuntos
Lipossomos , Imageamento por Ressonância Magnética , Manganês , Lipossomos/química , Manganês/química , Imageamento por Ressonância Magnética/métodos , Humanos , Compostos de Manganês/química , Meios de Contraste/química , Tamanho da Partícula , Cloretos/químicaRESUMO
Magnetic resonance imaging (MRI) is a non-invasive powerful modern clinical technique that is extensively used for the high-resolution imaging of soft tissues. To obtain high-definition pictures of tissues or of the whole organism this technique is enhanced by the use of contrast agents. Gadolinium-based contrast agents have an excellent safety profile. However, over the last two decades, some specific concerns have surfaced. Mn(II) has different favorable physicochemical characteristics and a good toxicity profile, which makes it a good alternative to the Gd(III)-based MRI contrast agents currently used in clinics. Mn(II)-disubstituted symmetrical complexes containing dithiocarbamates ligands were prepared under a nitrogen atmosphere. The magnetic measurements on Mn complexes were carried out with MRI phantom measurements at 1.5 T with a clinical magnetic resonance. Relaxivity values, contrast, and stability were evaluated by appropriate sequences. Studies conducted to evaluate the properties of paramagnetic imaging in water using a clinical magnetic resonance showed that the contrast, produced by the complex [Mn(II)(L')2] × 2H2O (L' = 1.4-dioxa-8-azaspiro[4.5]decane-8-carbodithioate), is comparable to that produced by gadolinium complexes currently used in medicine as a paramagnetic contrast agent.
Assuntos
Meios de Contraste , Manganês , Manganês/química , Meios de Contraste/química , Gadolínio/química , Imageamento por Ressonância Magnética/métodos , Espectroscopia de Ressonância MagnéticaRESUMO
The field of radiopharmaceuticals is constantly evolving thanks to the great contribution of specialists coming from different disciplines such as inorganic chemistry, radiochemistry, organic and biochemistry, pharmacology, nuclear medicine, physics, etc [...].
RESUMO
The favorable nuclear properties in combination with the rich coordination chemistry make technetium-99m the radioisotope of choice for the development of myocardial perfusion tracers. In the early 1980s, [99mTc]Tc-Sestamibi, [99mTc]Tc-Tetrofosmin, and [99mTc]Tc-Teboroxime were approved as commercial radiopharmaceuticals for myocardial perfusion imaging in nuclear cardiology. Despite its peculiar properties, the clinical use of [99mTc]Tc-Teboroxime was quickly abandoned due to its rapid myocardial washout. Despite their widespread clinical applications, both [99mTc]Tc-Sestamibi and [99mTc]Tc-Tetrofosmin do not meet the requirements of an ideal perfusion imaging agent due to their relatively low first-pass extraction fraction and high liver absorption. An ideal radiotracer for myocardial perfusion imaging should have a high myocardial uptake; a high and stable target-to-background ratio with low uptake in the lungs, liver, stomach during the image acquisition period; a high first-pass myocardial extraction fraction and very rapid blood clearance; and a linear relationship between radiotracer myocardial uptake and coronary blood flow. Although it is difficult to reconcile all these properties in a single tracer, scientific research in the field has always channeled its efforts in the development of molecules that are able to meet the characteristics of ideality as much as possible. This short review summarizes the developments in 99mTc myocardial perfusion tracers, which are able to fulfill hitherto unmet medical needs and serve a large population of patients with heart disease, and underlines their strengths and weaknesses, the lost and found opportunities thanks to the developments of the new ultrafast SPECT technologies.
Assuntos
Tomografia Computadorizada por Emissão de Fóton Único de Sincronização Cardíaca , Imagem de Perfusão do Miocárdio , Miocárdio , Compostos de Organotecnécio , Compostos Radiofarmacêuticos , Humanos , Compostos de Organotecnécio/química , Compostos de Organotecnécio/farmacocinética , Compostos de Organotecnécio/uso terapêutico , Compostos Radiofarmacêuticos/química , Compostos Radiofarmacêuticos/farmacocinética , Compostos Radiofarmacêuticos/uso terapêuticoRESUMO
Is the 67Cu production worldwide feasible for expanding preclinical and clinical studies? How can we face the ingrowing demands of this emerging and promising theranostic radionuclide for personalized therapies? This review looks at the different production routes, including the accelerator- and reactor-based ones, providing a comprehensive overview of the actual 67Cu supply, with brief insight into its use in non-clinical and clinical studies. In addition to the most often explored nuclear reactions, this work focuses on the 67Cu separation and purification techniques, as well as the target material recovery procedures that are mandatory for the economic sustainability of the production cycle. The quality aspects, such as radiochemical, chemical, and radionuclidic purity, with particular attention to the coproduction of the counterpart 64Cu, are also taken into account, with detailed comparisons among the different production routes. Future possibilities related to new infrastructures are included in this work, as well as new developments on the radiopharmaceuticals aspects.
RESUMO
In recent decades, the use of alpha; pure beta; or beta/gamma emitters in oncology, endocrinology, and interventional cardiology rheumatology, has proved to be an important alternative to the most common therapeutic regimens. Among radionuclides used for therapy in nuclear medicine, two rhenium radioisotopes are of particular relevance: rhenium-186 and rhenium-188. The first is routinely produced in nuclear reactors by direct neutron activation of rhenium-186 via 185Re(n,γ)186Re nuclear reaction. Rhenium-188 is produced by the decay of the parent tungsten-188. Separation of rhenium-188 is mainly performed using a chromatographic 188W/188Re generator in which tungsten-188 is adsorbed on the alumina column, similar to the 99Mo/99mTc generator system, and the radionuclide eluted in saline solution. The application of rhenium-186 and rhenium-188 depends on their specific activity. Rhenium-186 is produced in low specific activity and is mainly used for labeling particles or diphosphonates for bone pain palliation. Whereas, rhenium-188 of high specific activity can be used for labeling peptides or bioactive molecules. One of the advantages of rhenium is its chemical similarity with technetium. So, diagnostic technetium analogs labeled with radiorhenium can be developed for therapeutic applications. Clinical trials promoting the use of 186/188Re-radiopharmaceuticals is, in particular, are discussed.
Assuntos
Medicina Nuclear , Rênio , Medicina Nuclear/métodos , Radioisótopos/química , Radioisótopos/uso terapêutico , Compostos Radiofarmacêuticos/química , Compostos Radiofarmacêuticos/uso terapêutico , Rênio/química , Rênio/uso terapêutico , TecnécioRESUMO
The development of multimodal imaging techniques such as positron emission tomography (PET) and magnetic resonance imaging (MRI) allows the contemporary obtaining of metabolic and morphological information. To fully exploit the complementarity of the two imaging modalities, the design of probes displaying radioactive and magnetic properties at the same time could be very beneficial. In this regard, transition metals offer appealing options, with manganese representing an ideal candidate. As nanosized imaging probes have demonstrated great value for designing advanced diagnostic/theranostic procedures, this work focuses on the potential of liposomal formulations loaded with a new synthesized paramagnetic Mn(II) chelates. Negatively charged liposomes were produced by thin-layer hydration method and extrusion. The obtained formulations were characterized in terms of size, surface charge, efficiency of encapsulation, stability over time, relaxivity, effective magnetic moment, and in vitro antiproliferative effect on human cells by means of the MTT assay. The negatively charged paramagnetic liposomes were monodisperse, with an average hydrodynamic diameter not exceeding 200 nm, and they displayed good stability and no cytotoxicity. As determined by optical emission spectroscopy, manganese complexes are loaded almost completely on liposomes maintaining their paramagnetic properties.
Assuntos
Lipossomos , Manganês , Humanos , Íons , Lipossomos/química , Imageamento por Ressonância Magnética/métodos , Nanotecnologia , Tomografia por Emissão de PósitronsRESUMO
The trend to achieve even more compact-sized systems is leading to the development of micro-scale reactors (lab-on-chip) in the field of radiochemical separation and radiopharmaceutical production. Technetium-99m extraction from both high and low specific activity molybdenum could be simply performed by MEK-driven solvent extraction if it were not for unpractical automation. The aim of this work is to develop a solvent extraction and separation process of technetium from molybdenum in a micro-scale in-flow chemistry regime with the aid of a capillary loop and a membrane-based separator, respectively. The developed system is able to extract and separate quantitatively and selectively (91.0 ± 1.8% decay corrected) the [99mTc]TcO4Na in about 20 min, by using a ZAIPUT separator device. In conclusion, we demonstrated for the first time in our knowledge the high efficiency of a MEK-based solvent extraction process of 99mTc from a molybdenum-based liquid phased in an in-flow micro-scale regime.
RESUMO
Cyclotron-based radionuclides production by using solid targets has become important in the last years due to the growing demand of radiometals, e.g., 68Ga, 89Zr, 43/47Sc, and 52/54Mn. This shifted the focus on solid target management, where the first fundamental step of the radiochemical processing is the target dissolution. Currently, this step is generally performed with commercial or home-made modules separated from the following purification/radiolabelling modules. The aim of this work is the realization of a flexible solid target dissolution system to be easily installed on commercial cassette-based synthesis modules. This would offer a complete target processing and radiopharmaceutical synthesis performable in a single module continuously. The presented solid target dissolution system concept relies on an open-bottomed vial positioned upon a target coin. In particular, the idea is to use the movement mechanism of a syringe pump to position the vial up and down on the target, and to exploit the heater/cooler reactor of the module as a target holder. All the steps can be remotely controlled and are incorporated in the cassette manifold together with the purification and radiolabelling steps. The performance of the device was tested by processing three different irradiated targets under different dissolution conditions.
RESUMO
(1) Background: Metal dithiocarbamate compounds have long been the subject of research due to their ease of formation, excellent properties and potential applications. However, manganese complexes with dithiocarbamates, to our knowledge, have never been used for medical imaging applications. With the aim of developing a new class of mononuclear manganese(II)-based agents for molecular imaging applications, we performed a specific investigation into the synthesis of mononuclear bis-substituted Mn(II) complexes with dithiocarbamate ligands. (2) Methods: Synthesis in either open or inert atmosphere at different Mn(II) to diethyldithiocarbamate molar ratios were performed and the products characterized by IR, EA, ESI-MS and XRD analysis. (3) Results: We found that only under oxygen-free atmospheric conditions the Mn(II) complex MnL2, where L = diethyldithiocarbamate ligand, is obtained, which was further observed to react with dioxygen in the solid state to form the intermediate superoxo Mn(III) complex [MnL2(η2-O2)]. The existence of the superoxo complex was revealed by mass spectroscopy, and this species was interpreted as an intermediate step in the reaction that led the bis-substituted Mn(II) complex, MnL2, to transform into the tris-substituted Mn(III) complex, MnL3. A similar result was found with the ligand L' (= bis(N-ethoxyethyl)dithiocarbamate). (4) Conclusions: We found that in open atmosphere and in aqueous solution, only manganese(III) diethyldithiocarbamate complexes can be prepared. We report here a new example of a small-molecule Mn(II) complex that efficiently activates dioxygen in the solid state through the formation of an intermediate superoxide adduct.
RESUMO
The site of Riparo Broion (Vicenza, northeastern Italy) preserves a stratigraphic sequence documenting the Middle-to-Upper Paleolithic transition, in particular the final Mousterian and the Uluzzian cultures. In 2018, a human tooth was retrieved from a late Mousterian level, representing the first human remain ever found from this rock shelter (Riparo Broion 1). Here, we provide the morphological description and taxonomic assessment of Riparo Broion 1 with the support of classic and virtual morphology, 2D and 3D analysis of the topography of enamel thickness, and DNA analysis. The tooth is an exfoliated right upper deciduous canine, and its general morphology and enamel thickness distribution support attribution to a Neanderthal child. Correspondingly, the mitochondrial DNA sequence from Riparo Broion 1 falls within the known genetic variation of Late Pleistocene Neanderthals, in accordance with newly obtained radiocarbon dates that point to approximately 48 ka cal BP as the most likely minimum age for this specimen. The present work describes novel and direct evidence of the late Neanderthal occupation in northern Italy that preceded the marked cultural and technological shift documented by the Uluzzian layers in the archaeological sequence at Riparo Broion. Here, we provide a new full morphological, morphometric, and taxonomic analysis of Riparo Broion 1, in addition to generating the wider reference sample of Neanderthal and modern human upper deciduous canines. This research contributes to increasing the sample of fossil remains from Italy, as well as the number of currently available upper deciduous canines, which are presently poorly documented in the scientific literature.
Assuntos
Dente Canino/anatomia & histologia , Fósseis/anatomia & histologia , Homem de Neandertal/anatomia & histologia , Dente Decíduo/anatomia & histologia , Animais , Itália , Maxila , PaleodontologiaRESUMO
INTRODUCTION: The most common and aggressive primary malignancy of the central nervous system is Glioblastoma that, as a wide range of malignant solid tumor, is characterized by extensive hypoxic regions. A great number of PET radiopharmaceuticals have been developed for the identification of hypoxia in solid tumors, among these, we find copper-based tracers. The aim of the current review paper was to provide an overview of radiocopper compounds applied for preclinical and clinical research in brain tumors and hypoxia imaging or therapy. EVIDENCE ACQUISITION: Copper offers a wide variety of isotopes, useful for nuclear medicine applications, but only 64Cu and 67Cu are under the spotlight of the scientific community since being good candidates for theranostic applications. Between the two, 64Cu availability and production cost have attracted more interest of the scientific community. EVIDENCE SYNTHESIS: In order to better understand the application of copper-bis thiosemicarbazones in hypoxia imaging, an overview of the role of hypoxia in cancer, existing non-imaging and imaging techniques for hypoxia identification and promising future avenues regarding hypoxia is necessary. Different proposed uptake mechanisms of [64Cu][Cu(ATSM)] inside the cell will be discussed and other 64Cu-based tracers for brain tumors described. CONCLUSIONS: Among radio copper compounds [64Cu][Cu(ATSM)] is the most studied radiopharmaceutical for imaging and treatment of brain tumors. Experimental evidence suggested that [64Cu][Cu(ATSM)] could be more appropriately considered as a marker of over-reduced intracellular state rather than a pure hypoxia agent. Moreover, preliminary clinical data suggested that [64Cu]CuCl
Assuntos
Neoplasias Encefálicas/diagnóstico por imagem , Neoplasias Encefálicas/radioterapia , Radioisótopos de Cobre/química , Hipóxia/metabolismo , Compostos Radiofarmacêuticos/química , Animais , Complexos de Coordenação/química , Humanos , Isótopos/química , Níquel/química , Tomografia por Emissão de Pósitrons , Cintilografia , Relação Estrutura-Atividade , Tiossemicarbazonas/química , Isótopos de Zinco/químicaRESUMO
The growing number of cyclotrons of different sizes installed in the territory has given a strong impulse to the production of conventional and emerging radionuclides for medical applications. In particular, the great advantage of using medical cyclotrons is the possibility to produce on-site, when needed (on-demand), with medical radionuclides of interest encouraging the personalized medicine approach. Radiometals satisfy the ideal characteristics that radionuclides should have for routine employment in nuclear medicine, especially since they have a robust chemistry suitable to synthetize stable in vivo radiopharmaceuticals with high radiochemical yields. In this letter several interdisciplinary aspects involved in the radiometals cyclotron production cycle are summarized focusing the attention on cyclotron production facilities, target material, and chemical processing available for medical applications. As an example, the current status and recent development in the production of the theranostic radionuclide scandium-47 have been reported.
Assuntos
Ciclotrons , Radioisótopos , Compostos Radiofarmacêuticos , Escândio , Humanos , Medicina Nuclear , CintilografiaRESUMO
The authors wish to make the following corrections to their paper [...].
RESUMO
Academic journals have published a large number of papers in the therapeutic nuclear medicine (NM) research field in the last 10 years. Despite this, a literature analysis has never before been made to point out the research interest in therapeutic radionuclides (RNs). For this reason, the present study aims specifically to analyze the research output on therapeutic radiometals from 2008 to 2018, with intent to quantify and identify global trends in scientific literature and emphasize the interdisciplinary nature of this research field. The data search targeted conventional (131I, 90Y, 177Lu, 188Re, 186Re, 153Sm, 89Sr, 186Er) and emergent (67Cu, 47Sc, 223Ra, 166Ho, 161Tb, 149Tb, 212Pb/212Bi, 225Ac, 213Bi, 211At, 117mSn) RNs. Starting from this time frame, authors have analyzed and interpreted this scientific trend quantitatively first, and qualitatively after.
Assuntos
Radioisótopos/uso terapêutico , Compostos Radiofarmacêuticos/uso terapêutico , Humanos , Publicações , PesquisaRESUMO
The reliable and efficient production of radioisotopes for diagnosis and therapy is becoming an increasingly important capability, due to their demonstrated utility in Nuclear Medicine applications. Starting from the first processes involving the separation of 99mTc from irradiated materials, several methods and concepts have been developed to selectively extract the radioisotopes of interest. Even though the initial methods were based on liquid-liquid extraction (LLE) approaches, the perceived difficulty in automating such processes has slowly moved the focus towards resin separation methods, whose basic chemical principles are often similar to the LLE ones in terms of chelators and phases. However, the emerging field of flow chemistry allows LLE to be easily automated and operated in a continuous manner, resulting in an even improved efficiency and reliability. In this contribution, we will outline the fundamentals of LLE processes and their translation into flow-based apparatuses; in addition, we will provide examples of radioisotope separations that have been achieved using LLE methods. This article is intended to offer insights about the future potential of LLE to purify medically relevant radioisotopes.
Assuntos
Extração Líquido-Líquido , Radioisótopos/isolamento & purificação , Extração Líquido-Líquido/instrumentação , Extração Líquido-Líquido/métodos , Medicina Nuclear/instrumentação , Medicina Nuclear/métodosRESUMO
Scorpionate ligands have played a crucial role in the development of technetium chemistry and, recently, they have also fueled important advancements in the discovery of novel diagnostic imaging agents based on the γ-emitting radionuclide technetium-99m. The purpose of this short review is to provide an illustration of the most general and relevant results in this field, however without being concerned with the details of the analytical features of the various compounds. Thus, emphasis will be given to the description of the general features of technetium complexes with scorpionate ligands including coordination modes, structural properties and an elementary bonding description. Similarly, the most relevant examples of technetium-99m radiopharmaceuticals derived from scorpionate ligands and their potential interest for nuclear imaging will be summarized.
Assuntos
Meios de Contraste/química , Complexos de Coordenação/química , Compostos Radiofarmacêuticos/química , Tecnécio/química , Animais , Barreira Hematoencefálica/metabolismo , Permeabilidade da Membrana Celular , Meios de Contraste/farmacocinética , Complexos de Coordenação/farmacocinética , Humanos , Ligantes , Estrutura Molecular , Compostos Radiofarmacêuticos/farmacocinética , Distribuição TecidualRESUMO
BACKGROUND: the gamma-emitting radionuclide Technetium-99m (99mTc) is still the workhorse of Single Photon Emission Computed Tomography (SPECT) as it is used worldwide for the diagnosis of a variety of phatological conditions. 99mTc is obtained from 99Mo/99mTc generators as pertechnetate ion, which is the ubiquitous starting material for the preparation of 99mTc radiopharmaceuticals. 99Mo in such generators is currently produced in nuclear fission reactors as a by-product of 235U fission. Here we investigated an alternative route for the production of 99Mo by irradiating a natural metallic molybdenum powder using a 14-MeV accelerator-driven neutron source. METHODS: after irradiation, an efficient isolation and purification of the final 99mTc-pertechnetate was carried out by means of solvent extraction. Monte Carlo simulations allowed reliable predictions of 99Mo production rates for a newly designed 14-MeV neutron source (New Sorgentina Fusion Source). RESULTS: in traceable metrological conditions, a level of radionuclidic purity consistent with accepted pharmaceutical quality standards, was achieved. CONCLUSIONS: we showed that this source, featuring a nominal neutron emission rate of about 1015 s-1, may potentially supply an appreciable fraction of the current 99Mo global demand. This study highlights that a robust and viable solution, alternative to nuclear fission reactors, can be accomplished to secure the long-term supply of 99Mo.
Assuntos
Molibdênio/química , Radioisótopos/química , Tecnécio/química , Ciclotrons/instrumentação , Fissão Nuclear , Compostos Radiofarmacêuticos , Pertecnetato Tc 99m de Sódio , Tomografia Computadorizada de Emissão de Fóton ÚnicoRESUMO
The widespread availability of novel radioactive isotopes showing nuclear characteristics suitable for diagnostic and therapeutic applications in nuclear medicine (NM) has experienced a great development in the last years, particularly as a result of key advancements of cyclotron-based radioisotope production technologies. At Legnaro National Laboratories of the National Institute of Nuclear Physics (LNL-INFN), Italy, a 70-MeV high current cyclotron has been recently installed. This cyclotron will be dedicated not only to pursuing fundamental nuclear physics studies, but also to research related to other scientific fields with an emphasis on medical applications. LARAMED project was established a few years ago at LNL-INFN as a new research line aimed at exploiting the scientific power of nuclear physics for developing innovative applications to medicine. The goal of this program is to elect LNL as a worldwide recognized hub for the development of production methods of novel medical radionuclides, still unavailable for the scientific and clinical community. Although the research facility is yet to become fully operative, the LARAMED team has already started working on the cyclotron production of conventional medical radionuclides, such as Tc-99m, and on emerging radionuclides of high potential medical interest, such as Cu-67, Sc-47, and Mn-52.
Assuntos
Laboratórios , Medicina Nuclear , Radioisótopos , Compostos Radiofarmacêuticos , Ciclotrons , Instalações de Saúde , Humanos , Medicina Nuclear/métodos , PesquisaRESUMO
The influence of effective room temperature on the radiochemical purity of 99mTc-radiopharmaceuticals was reported. This study was born from the observation that in the isolators used for the preparation of the 99mTc-radiopharmaceuticals the temperatures can be higher than those reported in the commercial illustrative leaflets of the kits. This is due, in particular, to the small size of the work area, the presence of instruments for heating, the continuous activation of air filtration, in addition to the fact that the environment of the isolator used for the 99mTc-radiopharmaceuticals preparation and storage is completely isolated and not conditioned. A total of 244 99mTc-radiopharmaceutical preparations (seven different types) have been tested and the radiochemical purity was checked at the end of preparation and until the expiry time. Moreover, we found that the mean temperature into the isolator was significantly higher than 25 °C, the temperature, in general, required for the preparation and storage of 99mTc-radiopharmaceuticals. Results confirmed the radiochemical stability of radiopharmaceutical products. However, as required in the field of quality assurance, the impact that different conditions than those required by the manufacturer on the radiopharmaceuticals quality have to be verified before human administration.