Synthesis of indano[60]fullerene thioketone and its application in organic solar cells.

Evaporable indano[60]fullerene ketone (FIDO) was converted to indano[60]fullerene thioketone (FIDS) in high yield by using Lawesson's reagent. Three compounds with different substituents in para position were successfully converted to the corresponding thioketones, showing that the reaction tolerates compounds with electron-donating and electron-withdrawing substituents. Computational studies with density functional theory revealed the unique vibrations of the thioketone group in FIDS. The molecular structure of FIDS was confirmed by single-crystal X-ray analysis. Bulk heterojunction organic solar cells using three evaporable fullerene derivatives (FIDO, FIDS, C60) as electron-acceptors were compared, and the open-circuit voltage with FIDS was 0.16 V higher than that with C60.

Evaporable Fullerene Indanones with Controlled Amorphous Morphology as Electron Transport Layers for Inverted Perovskite Solar Cells.

Fullerenes are among the most commonly used electron-transporting materials (ETMs) in inverted perovskite solar cells (IPSCs). Although versatile functionalized fullerene derivatives have shown excellent performance in IPSCs, pristine [60]fullerene (C60) is still the most widely used in devices mainly because of its uniform morphology by thermal deposition. However, thermally evaporable fullerene derivatives have not yet been achieved. Herein, we developed a series of evaporable fullerene derivatives, referred to as fullerene indanones (FIDOs), affording IPSCs with high power conversion efficiency (PCE) and long-term storage stability. The FIDOs were designed with a unique architecture in which the fullerene moiety and a benzene ring moiety are linked via a five-membered carbon ring in benzene ring plane. This molecular arrangement affords exceptional thermal stability, allowing the FIDOs to withstand harsh thermal deposition conditions. Moreover, by manipulating the steric bulk of the functional groups, we could control the state of the organic film from crystalline to amorphous. Subsequently, we used FIDOs as an electron transport layer (ETL) in IPSCs. Thanks to the suitable energy level and dual-passivation effect of FIDOs compared with a reference ETL using C60, the device using FIDOs achieved an open-circuit voltage of 1.16 V and a fill factor of 0.77. As a result, the PCE reached 22.11%, which is superior to 20.45% of the best-performing reference device. Most importantly, the FIDO-based IPSC devices exhibited exceptional stability in comparison to the reference device due to the stability of the amorphous ETL films.

Synthesis of Conjugated Donor-Acceptor Antiaromatic Porphyrins and Their Application to Perovskite Solar Cells.

A conjugated donor-acceptor antiaromatic porphyrin, composed of an antiaromatic thieno-fused porphyrin structure and a diketopyrrolopyrrole mioety, was synthesized and applied in a perovskite solar cell for the first time. Enhanced light absorption in the device by the antiaromatic porphyrin resulted in a significantly increased power conversion efficiency of 19.3%.

Detecting Human Actions in Drone Images Using YoloV5 and Stochastic Gradient Boosting.

Human action recognition and detection from unmanned aerial vehicles (UAVs), or drones, has emerged as a popular technical challenge in recent years, since it is related to many use case scenarios from environmental monitoring to search and rescue. It faces a number of difficulties mainly due to image acquisition and contents, and processing constraints. Since drones' flying conditions constrain image acquisition, human subjects may appear in images at variable scales, orientations, and occlusion, which makes action recognition more difficult. We explore low-resource methods for ML (machine learning)-based action recognition using a previously collected real-world dataset (the "Okutama-Action" dataset). This dataset contains representative situations for action recognition, yet is controlled for image acquisition parameters such as camera angle or flight altitude. We investigate a combination of object recognition and classifier techniques to support single-image action identification. Our architecture integrates YoloV5 with a gradient boosting classifier; the rationale is to use a scalable and efficient object recognition system coupled with a classifier that is able to incorporate samples of variable difficulty. In an ablation study, we test different architectures of YoloV5 and evaluate the performance of our method on Okutama-Action dataset. Our approach outperformed previous architectures applied to the Okutama dataset, which differed by their object identification and classification pipeline: we hypothesize that this is a consequence of both YoloV5 performance and the overall adequacy of our pipeline to the specificities of the Okutama dataset in terms of bias-variance tradeoff.

Facile Multiple Alkylations of C60 Fullerene.

The reduction of fullerene (C60) with sodium dispersion in the presence of an excess amount of dipropyl sulfate was found to yield highly propylated fullerene, C60(nC3H7)n (max. n = 24), and C60(nC3H7)20 was predominantly generated as determined by mass spectroscopy.

Face-mask-aware Facial Expression Recognition based on Face Parsing and Vision Transformer.

As wearing face masks is becoming an embedded practice due to the COVID-19 pandemic, facial expression recognition (FER) that takes face masks into account is now a problem that needs to be solved. In this paper, we propose a face parsing and vision Transformer-based method to improve the accuracy of face-mask-aware FER. First, in order to improve the precision of distinguishing the unobstructed facial region as well as those parts of the face covered by a mask, we re-train a face-mask-aware face parsing model, based on the existing face parsing dataset automatically relabeled with a face mask and pixel label. Second, we propose a vision Transformer with a cross attention mechanism-based FER classifier, capable of taking both occluded and non-occluded facial regions into account and reweigh these two parts automatically to get the best facial expression recognition performance. The proposed method outperforms existing state-of-the-art face-mask-aware FER methods, as well as other occlusion-aware FER methods, on two datasets that contain three kinds of emotions (M-LFW-FER and M-KDDI-FER datasets) and two datasets that contain seven kinds of emotions (M-FER-2013 and M-CK+ datasets).

Triarylamine/Bithiophene Copolymer with Enhanced Quinoidal Character as Hole-Transporting Material for Perovskite Solar Cells.

Polytriarylamine is a popular hole-transporting materials (HTMs) despite its suboptimal conductivity and significant recombination at the interface in a solar cell setup. Having noted insufficient conjugation among the triarylamine units along the polymer backbone, we inserted a bithiophene unit between two triarylamine units through iron-catalyzed C-H/C-H coupling of a triarylamine/thiophene monomer so that two units conjugate effectively via four quinoidal rings when the molecule functions as HTM. The obtained triarylamine/bithiophene copolymer (TABT) used as HTM showed a high-performance in methylammonium lead iodide perovskite (MAPbI3 ) solar cells. Mesityl substituted TABT forms a uniform film, shows high hole-carrier mobility, and has an ionization potential (IP=5.40 eV) matching that of MAPbI3 . We fabricated a solar cell device with a power conversion efficiency of 21.3 % and an open-circuit voltage of 1.15 V, which exceeds the performance of devices using reference standard such as poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine (PTAA) and Spiro-OMeTAD.

An Adamantane Capsule and its Efficient Uptake of Spherical Guests up to 3 nm in Water.

Efficient uptake of small to large guests, with a large difference in relative size, is quite rare for synthetic host compounds. Herein we designed and prepared a micellar capsule, composed of bent amphiphiles bearing two adamantyl groups, as a new host with a well-defined nanostructure. Unlike previous covalent, coordination, and hydrogen-bonding hosts, the adamantane-based capsule displays unusual uptake abilities toward spherical molecules with small (∼0.6 nm in diameter; e.g., adamantane) to medium size (∼1 nm; e.g., fullerene) as well as large size (∼3 nm; i.e., metal-organic polyhedra (MOP)), where the size differences are up to 5-fold, in water. Moreover, the resultant MOP-uptaking capsule incorporates medium-sized molecules (e.g., perylene and eosin Y) into the polyhedral cavity to generate ternary core-shell structures.

Multi-Walled Carbon Nanotube-Assisted Encapsulation Approach for Stable Perovskite Solar Cells.

Perovskite solar cells (PSCs) are regarded as the next-generation thin-film energy harvester, owing to their high performance. However, there is a lack of studies on their encapsulation technology, which is critical for resolving their shortcomings, such as their degradation by oxygen and moisture. It is determined that the moisture intrusion and the heat trapped within the encapsulating cover glass of PSCs influenced the operating stability of the devices. Therefore, we improved the moisture and oxygen barrier ability and heat releasing capability in the passivation of PSCs by adding multi-walled carbon nanotubes to the epoxy resin used for encapsulation. The 0.5 wt% of carbon nanotube-added resin-based encapsulated PSCs exhibited a more stable operation with a ca. 30% efficiency decrease compared to the ca. 63% decrease in the reference devices over one week under continuous operation. Specifically, the short-circuit current density and the fill factor, which are affected by moisture and oxygen-driven degradation, as well as the open-circuit voltage, which is affected by thermal damage, were higher for the multi-walled carbon nanotube-added encapsulated devices than the control devices, after the stability test.

Vapor-Assisted Ex-Situ Doping of Carbon Nanotube toward Efficient and Stable Perovskite Solar Cells.

Single-walled carbon nanotubes (CNTs) has been considered as a promising material for a top electrode of perovskite solar cells owing to its hydrophobic nature, earth-abundance, and mechanical robustness. However, its poor conductivity, a shallow work function, and nonreflective nature have limited further enhancement in power conversion efficiency (PCE) of top CNT electrode-based perovskite solar cells. Here, we introduced a simple and scalable method to address these issues by utilizing an ex-situ vapor-assisted doping method. Trifluoromethanesulfonic acid (TFMS) vapor doping of the free-standing CNT sheet enabled tuning of conductivity and work function of the CNT electrode without damaging underneath layers. The sheet resistance of the CNT sheet was decreased by 21.3% with an increase in work function from 4.75 to 4.96 eV upon doping of TFMS. In addition, recently developed 2D perovskite-protected Cs-containing formamidium lead iodide (FACsPbI3) technology was employed to maximize the absorption. Because of the lowered resistance, better energy alignment, and improved absorption, the CNT electrode-based PSCs produced a PCE of 17.6% with a JSC of 24.21 mA/cm2, VOC of 1.005 V, and FF of 0.72. Furthermore, the resulting TFMS-doped CNT-PSCs demonstrated higher thermal and operational stability than bare CNT and metal electrode-based devices.

Controlled Redox of Lithium-Ion Endohedral Fullerene for Efficient and Stable Metal Electrode-Free Perovskite Solar Cells.

High efficiency perovskite solar cells have underpinned the rapid growth of the field. However, their low device stability limits further advancement. Hygroscopic lithium bis(trifluoromethanesulfonyl)imide (Li+TFSI-) and metal electrode are the main causes of the device instability. In this work, the redox reaction between lithium-ion endohedral fullerenes and 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobi-fluorene (spiro-MeOTAD) was controlled to optimize the amount of oxidized spiro-MeOTAD and antioxidizing neutral endohedral fullerenes. Application of this mixture to metal-free carbon nanotube (CNT)-laminated perovskite solar cells resulted in 17.2% efficiency with a stability time of more than 1100 h under severe conditions (temperature = 60 °C, humidity = 70%). Such high performance is attributed to the uninhibited charge flow, no metal-ion migration, and the enhanced antioxidizing activity of the devices.

Highly Selective Synthesis of Tetrahydronaphthaleno[60]fullerenes via Fullerene-Cation-Mediated Intramolecular Cyclization.

A high-yielding protocol to construct six-membered carbon rings on fullerene is presented. This methodology with in situ fullerene-cation-mediated intramolecular cyclization provides high selectivity and efficient access to six-membered tetrahydronaphthaleno[60]fullerenes with a remarkable functional group tolerance and excellent yields. Furthermore, high solubilities of tetrahydronaphthaleno[60]fullerenes are reported.

Reduced Knoevenagel Reaction of Acetetracenylene-1,2-dione with Acceptor Units for Luminescent Tetracene Derivatives.

Acetetracenylene-1,2-dione reacted with 3-ethylrhodanine in the presence of piperidine and Hantzsch ester via a Knoevenagel condensation-reduction sequence to give a tetracene-rhodanine adduct. This reduced Knoevenagel product exhibited magenta luminescence with a fluorescence quantum yield of φ = 0.34 and fluorescence lifetime of τ = 13.2 ns in toluene. Electrochemical studies and charge carrier transport measurements revealed ambipolar properties with hole and electron mobilities of 5.1 × 10-7 and 1.6 × 10-4 cm2/(V s), respectively.

Synthesis of Benzothieno[60]fullerenes through Fullerenyl Cation Intermediates.

Benzothieno[60]fullerenes were synthesized using fullerenyl cations as key intermediates. The reaction proceeded through a nucleophilic attack of the sulfur atom as a weak nucleophile to the fullerenyl cation electrophile. A monoarylated fullerene, (2-methylthiophenyl)hydro[60]fullerene, C60ArH (Ar = C6H4-SMe-2 and so on; four derivatives) was subjected to deprotonation with KO tBu to form a fullerenyl anion ArC60-, followed by oxidation using I2 to generate a fullerenyl cation ArC60+, leading to intramolecular demethylative cyclization via fullerene cation-S interaction to the product. Electrochemical and computational studies revealed slightly narrower band gap of this compound than usual fullerene derivatives because of the relatively high-lying HOMO of the fused thieno moiety.

Mechanochromism, Twisted/Folded Structure Determination, and Derivatization of (N-Phenylfluorenylidene)acridane.

(N-Phenylfluorenylidene)acridane (Ph-FA) compounds with electron-withdrawing and -donating substituents (H, MeO, Ph, NO2 , Br, F) at the para position of the phenyl group were successfully synthesized by Barton-Kellogg reactions of N-aryl thioacridones and diazofluorene. By using the substituent on the nitrogen atom to alter the electronic properties, both the folded and twisted conformers of p-NO2 -C6 H4 -FA could be crystallographically characterized, which enabled the charge transfer from the electron-donating acridane moiety to the electron-accepting fluorenylidene moiety to be understood. Ground-state mechanochromism, thermochromism, vapochromism, and proton-induced chromism were demonstrated between the folded and twisted conformations of the conformers. Protonation and chemical oxidation of Ph-FA gave two stable acridinium compounds, namely, the fluorenylacridinium and acridinium radical cations. The present study will contribute to the development of functional dyes and organic semiconductors.

Octaalkoxyfullerenes: Widely LUMO-Tunable C2 v-Symmetric Fullerene Derivatives.

C2 v-Symmetric octaalkoxyfullerenes, C60(OR)8 (R = CH3, C2H5, CH2CF3), were synthesized by reacting octabromofullerene with the corresponding alcohols in the presence of AgBF4. The reactions occurred with no change in the addition pattern, and the compounds were unambiguously characterized by NMR spectroscopy and X-ray structure analysis. Electrochemical measurements revealed not only that these derivatives have stable redox properties but also that their LUMO levels can be tuned over a very wide range.

Lithium-Ion Endohedral Fullerene (Li+ @C60 ) Dopants in Stable Perovskite Solar Cells Induce Instant Doping and Anti-Oxidation.

Herein, we report use of [Li+ @C60 ]TFSI- as a dopant for spiro-MeOTAD in lead halide perovskite solar cells. This approach gave an air stability nearly 10-fold that of conventional devices using Li+ TFSI- . Such high stability is attributed to the hydrophobic nature of [Li+ @C60 ]TFSI- repelling moisture and absorbing intruding oxygen, thereby protecting the perovskite device from degradation. Furthermore, [Li+ @C60 ]TFSI- could oxidize spiro-MeOTAD without the need for oxygen. The encapsulated devices exhibited outstanding air stability for more than 1000 h while illuminated under ambient conditions.

Synthesis and Crystal Structure of Li+@Fluoreno[60]fullerene: Effect of Encapsulated Lithium Ion on Electrochemistry of Spiroannelated Fullerene.

The reaction of [Li+@C60]TFSI- (TFSI = bis(trifluoromethanesulfonyl)imide) with 9-diazofluorene directly produced a [6,6]-adduct of lithium-ion-containing fluoreno[60]fullerene, [6,6]-[Li+@C60(fluoreno)]TFSI-, which was crystallographically characterized. Cyclic voltammetry of the compound showed a reversible one-electron reduction wave at -0.51 V (vs Fc/Fc+) and an irreversible reduction wave for the second electron. The latter was attributed to opening of the three-membered ring due to strong stabilization of the resulting sp3-carbanion by the encapsulated Li+ and formation of a 14π-electron aromatic fluorenyl anion.

Crystallographic Structure Determination of Both [5,6]- and [6,6]-Isomers of Lithium-Ion-Containing Diphenylmethano[60]fullerene.

Organic functionalization of lithium-ion-containing [60]fullerene, Li+@C60, was performed by using diphenyl(diazo)methane as a stable, readily available diazo compound to obtain lithium-ion-containing [5,6]- and [6,6]-diphenylmethano[60]fullerenes, Li+@C61Ph2. The bis(trifluoromethanesulfonyl)imide (TFSI) salts of [5,6]- and [6,6]-Li+@C61Ph2 were successfully separated by using a cation exchange column with eluent containing LiTFSI. Improved separation protocol and high crystallinity of ionic components in less polar solvents enabled separate crystallization of each isomer. Both [5,6]-open and [6,6]-closed structures of Li+@C61Ph2 were determined by synchrotron radiation X-ray crystallography. Elucidating the [5,6]-open methano[60]fullerene (fulleroid) structure will contribute to materials research on fulleroids.

Regiocontrolled Electrosynthesis of [60]Fullerene Bisadducts: Photovoltaic Performance and Crystal Structures of C60 o-Quinodimethane Bisadducts.

C60 o-quinodimethane bisadducts [C60(QM)2] are promising electron acceptors for bulk heterojuction (BHJ) organic solar cells (OSCs). However, previous production of C60(QM)2 often resulted in excessive regioisomers, which were difficult to purify and might consequently obscure the structure-performance study of the organofullerene acceptors. Herein, the electrosynthesis of C60(QM)2 is reported. The reaction exhibits a strong regiocontrol with generation of fewer regioisomers. Pure regioisomers of cis-2, trans-3, and e C60(QM)2 are obtained, and the structures are solved with single-crystal X-ray diffraction. Interestingly, the cis-2 and trans-3 regioisomers exhibit better photovoltaic performance than the e regioisomer in the OSCs based on poly(3-hexylthiophene) (P3HT), which can be correlated with their structural difference.