Extended Release of Bupivacaine from Temperature-responsive Hydrogels Provides Multi-day Analgesia for Postoperative Pain.

OBJECTIVE: A local anesthetic that provides analgesia lasting at least three days could significantly improve postoperative pain management. This study evaluated the analgesic efficacy and safety of an extended-release formulation of bupivacaine based on the injectable hydrogel carrier poly(N-isopropylacrylamide-co-dimethylbutyrolactone acrylamide-co-Jeffamine M-1000 acrylamide) (PNDJ). METHODS: The efficacy of PNDJ containing 4% bupivacaine (SBG004) given by peri-incisional subcutaneous injection (SBG004 SC) or wound filling instillation (SBG004 WF) was evaluated compared to saline, liposomal bupivacaine, bupivacaine collagen sponge, bupivacaine-meloxicam polyorthoester, and bupivacaine HCl in a porcine skin and muscle incision model. Mechanical allodynia was assessed by withdrawal from application of von Frey filaments, and local tolerance was evaluated by histology. Bupivacaine pharmacokinetics for SBG004 SC were measured in rabbits (16.5 mg bupivacaine/kg). RESULTS: Animals demonstrated less mechanical allodynia at incisions receiving SBG004 SC for up to 96 hours postoperatively. Incisions treated with SBG004 SC tolerated more force without a withdrawal indicative of pain compared to saline for 96 hours, and compared to SBG004 WF and all active controls at 24, 48, and 72 hours except bupivacaine-meloxicam polyorthoester at 72 hours. By 49 days, SBG004 was histologically absent and was replaced with granulation tissue infiltrated with immune cells in some areas. In rabbits, Cmax was 41.6 ± 9.7 ng/mL with t1/2 82.0 ± 35.8 hours (mean ± SD). CONCLUSIONS: Peri-incisional SBG004 SC provided extended release of bupivacaine sufficient to reduce sensation of incisional pain for 96 hours, in vivo bupivacaine delivery for at least 7 days, and a favorable local and systemic toxicity profile.

Biophysical differentiation of susceptibility and chemical differences in Staphylococcus aureus.

Differentiating bacteria strains using biophysical forces has been the focus of recent studies using dielectrophoresis (DEP). The refinement of these studies has created high-resolution separations such that very subtle properties of the cells are enough to induce significant differences in measurable biophysical properties. These high-resolution capabilities build upon the advantages of DEP which include small sample sizes and fast analysis times. Studies focusing on differentiating antimicrobial resistant and susceptible bacteria potentially have significant impact on human health and medical care. A prime example is Staphylococcus aureus, which commonly colonizes adults without ill effects. However, the pathogen is an important cause of infections, including surgical site infections. Treatment of S. aureus infections is generally possible with antimicrobials, but antimicrobial resistance has emerged. Of special importance is resistance to methicillin, an antimicrobial created in response to resistance to penicillin. Here, dielectrophoresis is used to study methicillin-resistant (MRSA) and -susceptible S. aureus (MSSA) strains, both with and without the addition of a fluorescent label. The capture onset potential of fluorescently-labeled MRSA (865 ± 71 V) and thus the ratio of electrokinetic to dielectrophoretic mobility, was found to be higher than that of fluorescently-labeled MSSA (685 ± 61 V). This may be attributable to the PBP2a enzyme present in the MRSA strain and not in the MSSA bacteria. Further, unlabeled MRSA was found to have a capture onset potential of 732 ± 44 V, while unlabeled MSSA was found to have a capture onset potential of 562 ± 59 V. This shows that the fluorescently-labeled bacteria require a higher applied potential, and thus ratio of mobilities, to capture than the unlabeled bacteria.

Chlorhexidine Antiseptic Irrigation Eradicates Staphylococcus epidermidis From Biofilm: An In Vitro Study.

BACKGROUND: Antiseptic and antibacterial solutions used for intraoperative irrigation are intended to kill bacteria and thereby decrease the incidence of surgical site infections. It is unknown if the concentrations and exposure times of irrigation solutions commonly used for prophylaxis in clean cases (povidone-iodine 0.35% for 3 minutes) are effective against bacteria in biofilm that are present in implant infections. Currently, povidone-iodine (0.35%), chlorhexidine (0.05%), sodium hypochlorite (0.125%), and triple antibacterial solution are all being used off-label for wound irrigation after surgical débridement for orthopaedic infections. QUESTIONS/PURPOSES: Do commonly used antibacterials and antiseptics kill bacteria in established biofilm at clinically relevant concentrations and exposure times? METHODS: Staphylococcus epidermidis (ATCC#35984) biofilms were exposed to chlorhexidine (0.025%, 0.05%, and 0.1%), povidone-iodine (0.35%, 1.0%, 3.5%, and 10%), sodium hypochlorite (0.125%, 0.25%, and 0.5%,), and triple antibacterial solution (bacitracin 50,000 U/L, gentamicin 80 mg/L, and polymyxin 500,000 U/L) for 1, 5, and 10 minutes in triplicate. Surviving bacteria were detected by 21-day subculture. Failure to eradicate all bacteria in any of the three replicates was considered to be "not effective" for that respective solution, concentration, and exposure time. RESULTS: Chlorhexidine 0.05% and 0.1% at all three exposure times, povidone-iodine 10% at all three exposure times, and povidone-iodine 3.5% at 10 minutes only were effective at eradicating S epidermidis from biofilm. All concentrations and all exposure times of sodium hypochlorite and triple antibacterial solution were not effective. CONCLUSIONS: Chlorhexidine is capable of eradicating S epidermidis from biofilm in vitro in clinically relevant concentrations and exposure times. Povidone-iodine at commonly used concentrations and exposure times, sodium hypochlorite, and triple antibacterial solutions are not. CLINICAL RELEVANCE: This in vitro study suggests that chlorhexidine may be a more effective irrigation solution for S epidermidis in biofilm than other commonly used solutions, such as povidone-iodine, Dakin's solution, and triple antibiotic solution. Clinical outcomes should be studied to determine the most effective antiseptic agent, concentration, and exposure time when intraoperative irrigation is used in the presence of biofilm.

Correction: Biophysical separation of Staphylococcus epidermidis strains based on antibiotic resistance.

Correction for 'Biophysical separation of Staphylococcus epidermidis strains based on antibiotic resistance' by Paul V. Jones et al., Analyst, 2015, 140, 5152-5161.

Biofilm Antimicrobial Susceptibility Increases With Antimicrobial Exposure Time.

BACKGROUND: The antimicrobial concentration required to kill all the bacteria in a biofilm, known as the minimum biofilm eradication concentration (MBEC), is typically determined in vitro by exposing the biofilm to serial concentrations of antimicrobials for 24 hours or less. Local delivery is expected to cause high local levels for longer than 24 hours. It is unknown if longer antimicrobial exposures require the same concentration to eradicate bacteria in biofilm. Questions/purposes Does MBEC change with increased antimicrobial exposure time? METHODS: Biofilms were grown for 24 hours using five pathogens (methicillin-sensitive Staphylococcus aureus, methicillin-resistant Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli, and Pseudomonas aeruginosa) and then exposed to four antimicrobials regimens: tobramycin, vancomycin, and tobramycin combined with vancomycin in 3:1 and 1:1 ratios by weight in concentrations of 62.5, 125, 250, 500, 1000, 2000, 4000, and 8000 µg/mL for three durations, 1, 3, and 5 days, in triplicate. MBEC was measured as the lowest concentration that killed all bacteria in the biofilm determined by 21-day subculture. RESULTS: MBEC was lower when antimicrobial exposure time was longer. For the staphylococcus species, the MBEC was lower when exposure time was 5 days than 1 day in 11 of 12 antimicrobial/microorganism pairs. The MBEC range for these 11 pairs on Day 1 was 4000 to > 8000 µg/mL and on Day 5 was < 250 to 8000 µg/mL. MBEC for tobramycin/P. aeruginosa was 2000 µg/mL on Day 1 and ≤ 250 µg/mL on Day 5, and for E. coli, 125 µg/mL on Day 1 and ≤ 62.5 on Day 5. CONCLUSIONS: Although antimicrobial susceptibility was lower for longer exposure times in the microorganisms we studied, confirmation is required for other pathogens. Clinical Relevance One-day MBEC assays may overestimate the local antimicrobial levels needed to kill organisms in biofilm if local levels are sustained at MBEC or above for longer than 24 hours. Future studies are needed to confirm that antimicrobial levels achieved clinically from local delivery are above the MBEC at relevant time points and to confirm that MBEC for in vitro microorganisms accurately represents MBEC of in vivo organisms in an clinical infection.

Biophysical separation of Staphylococcus epidermidis strains based on antibiotic resistance.

Electrophoretic and dielectrophoretic approaches to separations can provide unique capabilities. In the past, capillary and microchip-based approaches to electrophoresis have demonstrated extremely high-resolution separations. More recently, dielectrophoretic systems have shown excellent results for the separation of bioparticles. Here we demonstrate resolution of a difficult pair of targets: gentamicin resistant and susceptible strains of Staphylococcus epidermidis. This separation has significant potential implications for healthcare. This establishes a foundation for biophysical separations as a direct diagnostic tool, potentially improving nearly every figure of merit for diagnostics and antibiotic stewardship. The separations are performed on a modified gradient insulator-based dielectrophoresis (g-iDEP) system and demonstrate that the presence of antibiotic resistance enzymes (or secondary effects) produces a sufficient degree of electrophysical difference to allow separation. The differentiating factor is the ratio of electrophoretic to dielectrophoretic mobilities. This factor is 4.6 ± 0.6 × 10(9) V m(-2) for the resistant strain, versus 9.2 ± 0.4 × 10(9) V m(-2) for the susceptible strain. Using g-iDEP separation, this difference produces clear and easily discerned differentiation of the two strains.

Local gentamicin delivery from resorbable viscous hydrogels is therapeutically effective.

BACKGROUND: Local delivery can achieve the high antimicrobial concentrations necessary to kill biofilm-related microbes. Degradation times for resorbable carriers are too long. Hydrogels (gels of hydrophilic polymer in water) can degrade faster but release antimicrobials too quickly. We previously developed hydrogels based on the copolymer poly(N-isopropylacrylamide-co-dimethyl-γ-butyrolactone acrylate-co-Jeffamine® M-1000 acrylamide) (PNDJ) with delivery times of several days with complete degradation in less than 6 weeks. QUESTIONS/PURPOSES: We asked: (1) What is the elution profile of gentamicin from PNDJ hydrogels? (2) Is gentamicin released from gentamicin-loaded PNDJ (G-PNDJ) hydrogel effective for treatment of orthopaedic infection? (3) Does local gentamicin delivery from G-PNDJ hydrogel cause renal dysfunction? METHODS: (1) Two formulations of G-PNDJ, lower dose (1.61 wt%) and higher dose (3.14 wt%), five samples each, were eluted in buffered saline under infinite sink conditions. (2) Infections were induced in 16 New Zealand White rabbits by inserting a Kirschner wire in a devascularized radius segment and inoculating with 7.5×10(6) colony-forming units Staphylococcus aureus. At 3 weeks, débridement was performed and a new Kirschner wire was placed in the dead space. Treatment was randomized to higher-dose G-PNDJ or no hydrogel. No systemic antimicrobials were used. Positive culture and acute inflammation on histology were used to determine the presence of infection 4 weeks postdébridement. (3) 3.14 wt% G-PNDJ, 0.75, 1.5, or 3.0 mL, was injected subcutaneously in nine Sprague-Dawley rats, three of each dose. Serum gentamicin, blood urea nitrogen, and creatinine were measured on Days 1, 3, 7, 14, and 28. RESULTS: (1) Gentamicin release was sustained over 7 days with the higher-dose formulation release profile similar to release from high-dose antimicrobial-loaded bone cement. (2) Four weeks postdébridement, infection was present in eight of eight no-hydrogel rabbits but zero of eight rabbits treated with G-PNDJ hydrogel (p<0.001). (3) Blood urea nitrogen and creatinine were transiently elevated (p<0.05) only for the two of three rats receiving the 3.0-mL dose on Days 3 and 7. CONCLUSIONS: Gentamicin is delivered from PNDJ hydrogel with low systemic exposure and decreased treatment failure for orthopaedic infection. Transient renal dysfunction occurs at high doses. Biodistribution and toxicity testing are needed for G-PNDJ to be clinically usable. CLINICAL RELEVANCE: Resorbable viscous hydrogels for local antimicrobial delivery may improve outcomes for one-stage management of implant infections when uncemented reconstructions are performed.

Antimicrobial Release From Prefabricated Spacers Is Variable and the Dose Is Low.

BACKGROUND: High-dose antimicrobial-loaded bone cement (ALBC) is recommended to treat orthopaedic infections. Elution characteristics from prefabricated ALBC spacers and how they compare with hand-mixed ALBC are not well described. QUESTIONS/PURPOSES: (1) How does antimicrobial release from prefabricated spacers compare with release from hand-mixed ALBC over time? (2) Is antimicrobial release uniform across the surface of prefabricated ALBC spacers? (3) Do variations exist between different prefabricated spacer components? (4) Do textured surfaces release more antimicrobial than smooth surfaces? METHODS: Six prefabricated ALBC spacer components, two hip and four knee, and three hand-mixed ALBC formulations were studied in this comparative laboratory study. Gentamicin was eluted from 41 discrete sites over the surfaces of six spacer components and compared with elution from 15 ALBC specimens, five from each of three hand-mixed formulations. Elution was compared between spacer sites, components, and surface texture. Statistical analysis was performed by analysis of variance and Tukey's multiple-comparison test or t-test. RESULTS: Gentamicin release was highest in the first 24 hours for both prefabricated ALBC spacers and hand-mixed ALBC. Elution decreased over 7 days similarly for both. At Day 7, prefabricated ALBC spacers eluted more than hand-mixed 1 g ALBC (1 g ALBC: 1.49 ± 0.34, prefabricated: 3.59 ± 1.48, mean difference = 2.1 [0.2-4.0], p = 0.04) but eluted less than 5 g ALBC (9.21 ± 1.31, mean difference = -5.6 [-3.5 to -7.7], p < 0.001) and less than 10 g ALBC (35.8 ± 1.69, mean difference = -32.2 [-29.8 to -34.6], p < 0.001). Release varied from 2.7 to 9.9 µg/mm(2) over the surface of the spacers and from 3.5 to 5.5 µg/mm(2) between components with no component different than the others (Tukey). Release from textured surfaces was inconsistent. CONCLUSIONS: Antimicrobial release from prefabricated ALBC spacers is consistent with low-dose ALBC. Variation across the surface and between components is small compared with changes in antimicrobial load. CLINICAL RELEVANCE: Antimicrobial release from prefabricated ALBC spacers is consistent with local antimicrobial delivered from other low-dose ALBC formulations.

Liposomal Formulation Decreases Toxicity of Amphotericin B In Vitro and In Vivo.

BACKGROUND: Liposomal amphotericin B is locally delivered to treat fungal orthopaedic infections but little is known about local tissue toxicity, if any, that might be associated with local delivery. QUESTIONS/PURPOSES: (1) Is liposomal amphotericin B cytotoxic in vitro? (2) Is locally delivered liposomal amphotericin B toxic to tissue in vivo? METHODS: Mouse fibroblasts (BA LB/3T3 A31) and osteoblasts (MC3T3) were exposed to two formulations of amphotericin B (liposomal and deoxycholate) at concentrations of 0, 1, 5, 10, 100, 500, and 1000 µg/mL. Cell viability was determined by MTT assay after 1, 3, and 5 hours of exposure and a proliferation assay after 1, 4, and 7 days of exposure and then after 3 recovery days without drug. Tissue exposure occurred by local delivery of liposomal amphotericin B, 200 or 800 mg/batch antifungal-loaded bone cement (ALBC), or amphotericin B deoxycholate, 800 mg/batch ALBC in rat paraspinal muscles. White blood cell count (WBC) and serum amphotericin B levels were obtained on Days 1 and 3. Rats were euthanized at 2 and 4 weeks and semiqualitative histopathology was performed. RESULTS: Liposomal amphotericin B is cytotoxic in vitro but not toxic to tissues in vivo. All cells survived concentrations up to 1000 µg/mL for 5 hours, 100% ± 0%, but none survived ≥ 100 µg/mL for 7 days, 0% ± 0%. Fibrosis was seen adjacent to ALBC without inflammation or necrosis, indistinguishable from controls for both liposomal amphotericin B doses. Amphotericin B serum levels were all less than 1 µg/mL and WBC counts were all normal. CONCLUSIONS: In vitro cytotoxicity to liposomal amphotericin B occurred but no adverse tissue reaction was seen in vivo. CLINICAL RELEVANCE: Local delivery of liposomal amphotericin B in ALBC was well tolerated by mouse tissue; however, clinical studies are needed to confirm this finding in humans.

Biofilm growth has a threshold response to glucose in vitro.

BACKGROUND: Hyperglycemia is a risk factor for nosocomial infections with known host effects. Increased glucose levels also increase pathogenicity of infecting microbes through greater biofilm formation. The dose response of biofilm formation to glucose concentration is not known. QUESTIONS/PURPOSES: We asked: What is the relationship between the amount of biofilm formed by Staphylococcus epidermidis and Staphylococcus aureus and change in glucose concentration in the clinically important range of 20 to 300 mg/dL? METHODS: This experiment studied biofilm formation by S epidermidis and S aureus in Lennox broth medium supplemented with increasing glucose concentrations from 0 to 320 mg/dL in 20 mg/dL intervals. Biofilm was grown for 24 hours for S epidermidis and 48 hours for S aureus. Biofilms were heat fixed, stained with 0.1% crystal violet, and washed with deionized water. The dye was then extracted with 30% acetic acid. Visual light absorption of the extracted crystal violet dye at 600 nm was used to quantify the biofilm biomass. The effect of glucose concentration on the amount of biofilm mass produced was analyzed using ANOVA and Tukey's test. RESULTS: Biofilm mass was increased at higher glucose concentration for both species with a threshold response at 0 to 20 and 160 to 200 mg/dL for S epidermidis and 200 to 240 mg/dL for S aureus. CONCLUSIONS: Increased biofilm growth by S aureus and S epidermidis has a threshold response at clinically important concentrations. CLINICAL RELEVANCE: Postoperative hyperglycemia may increase the risk for implant infection through increased pathogenicity of intraoperative wound contaminants in addition to compromising host immune status.

Antimicrobial distribution from local delivery depends on dose : a pilot study with MRI.

BACKGROUND: Tissue distribution after local delivery has been quantified over a period of 5 hours on 7-T MRI in a rabbit model using gadolinium-labeled diethylenetriamine pentaacetic acid (Gd-DTPA) as an antimicrobial surrogate; however, it is unknown how the Gd-DTPA load in a local depot will affect the duration of high-concentration Gd-DTPA in local tissues after surgical débridement. QUESTIONS/PURPOSES: We determined whether the Gd-DTPA load in bone cement affected its local tissue distribution over a period of 1 month after local delivery. METHODS: A 1-cm3 soft tissue dead space was created in the quadriceps of seven rabbits and filled with gadolinium-loaded bone cement. At 7, 14, and 33 days, the volume of tissue with a Gd-DTPA concentration of more than 14 µg/mL was calculated from T1-weighted images using 7-T MRI. Differences in volumes of distribution were analyzed with ANOVA. RESULTS: The volume of tissue with more than 14 µg/mL Gd-DTPA was much larger from higher gadolinium loads on Day 7 (p=0.02) (2121 mm3 for 10 g and 665 mm3 for 1 g) and smaller with time for the 10-g formulation (2121 mm3 on Day 7 and 1241 mm3 on Day 14). CONCLUSIONS: Volume of distribution and duration of Gd-DTPA after local delivery increased with increasing load in the cement and decreased with time. CLINICAL RELEVANCE: For local delivery, high antimicrobial concentrations would be expected in greater volumes of tissue, for longer durations, when higher antimicrobial loads are used.

Synovial Fluid C-reactive Protein Clinical Decision Limit and Diagnostic Accuracy for Periprosthetic Joint Infection.

Introduction C-reactive protein (CRP) has long served as a prototypical biomarker for periprosthetic joint infection (PJI). Recently, synovial fluid (SF)-CRP has garnered interest as a diagnostic tool, with several studies demonstrating its diagnostic superiority over serum CRP for the diagnosis of PJI. Although previous studies have identified diagnostic thresholds for SF-CRP, they have been limited in scope and employed various CRP assays without formal validation for PJI diagnosis. This study aimed to conduct a formal single clinical laboratory validation to determine the optimal clinical decision limit of SF-CRP for the diagnosis of PJI. Methods A retrospective analysis of prospectively collected data was performed using receiver operating characteristic (ROC) and area under the curve (AUC) analyses. Synovial fluid samples from hip and knee arthroplasties, received from over 2,600 institutions, underwent clinical testing for PJI at a single clinical laboratory (CD Laboratories, Zimmer Biomet, Towson, MD) between 2017 and 2022. Samples were assayed for SF-CRP, alpha-defensin, white blood cell count, neutrophil percentage, and microbiological culture. After applying selection criteria, the samples were classified with the 2018 ICM PJI scoring system as "infected," "not infected," or "inconclusive." Data were divided into training and validation sets. The Youden Index was employed to optimize the clinical decision limit. Results A total of 96,061 samples formed the training (n = 67,242) and validation (n = 28,819) datasets. Analysis of the biomarker median values, culture positivity, anatomic distribution, and days from aspiration to testing revealed nearly identical specimen characteristics in both the training set and validation set. SF-CRP demonstrated an AUC of 0.929 (95% confidence interval (CI): 0.926-0.932) in the training set, with an optimal SF-CRP clinical decision limit for PJI diagnosis of 4.45 mg/L. Applying this cutoff to the validation dataset yielded a sensitivity of 86.1% (95% CI: 85.0-87.1%) and specificity of 87.1% (95% CI: 86.7-87.5%). No statistically significant difference in diagnostic performance was observed between the validation and training sets. Conclusion This study represents the largest single clinical laboratory evaluation of an SF-CRP assay for PJI diagnosis. The optimal CRP cutoff (4.45 mg/L) for PJI, which yielded a sensitivity of 86.1% and a specificity of 87.1%, is specific to the assay methodology and laboratory performing the assay. We propose that an SF-CRP test with a laboratory-validated optimal clinical decision limit for PJI may be preferable, in a clinical diagnostic setting, to serum CRP tests that do not have laboratory-validated clinical decision limits for PJI.

Synovial Fluid Cutibacterium acnes Antigen Is Detected Among Shoulder Samples with High Inflammation and Early Culture Growth.

BACKGROUND: An emerging paradigm suggests that positive Cutibacterium acnes shoulder cultures can result from either true infection or contamination, with true infections demonstrating a host inflammatory response and early culture growth. This clinical retrospective study examines the relationship between C. acnes antigen, C. acnes culture results, and inflammation. METHODS: From January 2021 to July 2023, 1,365 periprosthetic synovial fluid samples from 347 institutions were tested for shoulder infection at a centralized clinical laboratory. A biomarker scoring system based on the 2018 International Consensus Meeting (ICM) definition was utilized to assign each sample an inflammation score. Associations between inflammation, culture results, and C. acnes antigen results were assessed utilizing cluster and correlation analyses. RESULTS: Of 1,365 samples, 1,150 were culture-negative and 215 were culture-positive (94 C. acnes and 121 other organisms). Among the 94 C. acnes culture-positive samples, unsupervised clustering revealed 2 distinct sample clusters (silhouette coefficient, 0.83): a high-inflammation cluster (n = 67) and a low-inflammation cluster (n = 27). C. acnes antigen levels demonstrated moderate-strong positive correlation with inflammation (Spearman ρ, 0.60), with 166-fold higher levels of C. acnes antigen in high-inflammation samples (16.6 signal/cutoff [S/CO]) compared with low-inflammation samples (0.1 S/CO) (p < 0.0001). The days to C. acnes culture positivity demonstrated weak-inverse correlation with inflammation (Spearman ρ = -0.38), with 1.5-fold earlier growth among the 67 high-inflammation samples (6.7 compared with 10.4 days; p < 0.0001). Elevated C. acnes antigen was observed in only 4 (0.38%) of 1,050 low-inflammation culture-negative samples and in only 5 (4.9%) of 103 high-inflammation non-C. acnes-positive cultures. However, 19.0% of high-inflammation, culture-negative samples demonstrated elevated C. acnes antigen. CONCLUSIONS: Synovial fluid C. acnes antigen was detected among shoulder samples with high inflammation and early culture growth, supporting the emerging paradigm that these samples represent true infection. Future research should explore antigen testing to differentiate contamination from infection and to identify culture-negative C. acnes infections. LEVEL OF EVIDENCE: Diagnostic Level III. See Instructions for Authors for a complete description of levels of evidence.

The False-Positive Rate of Synovial Fluid Culture at a Single Clinical Laboratory Using Culture Bottles.

Introduction Synovial fluid (SF) cultures can yield false-positive or negative results when diagnosing periprosthetic joint infection (PJI). False-positives may arise during sample collection or from laboratory contamination. Understanding false-positive SF culture rates is crucial for interpreting PJI laboratory data, yet clinical laboratories rarely report these rates. This study aimed to define the false-positive SF culture rate at a major specialized clinical laboratory. Methods This study retrospectively analyzed prospectively collected data at a single clinical laboratory that receives SF for clinical testing for PJI. A total of 180,317 periprosthetic SF samples from the hip, knee, and shoulder were identified from January 2016 to December 2023, which met the inclusion criteria for this study. Samples were classified by both a modified 2018 International Consensus Meeting (ICM) score and an inflammation score that combined the SF-C-reactive protein, alpha-defensin, SF-white blood cell count, and SF-polymorphonuclear% into one standardized metric. Logistic regression was utilized to evaluate the impact of various collection-based characteristics on culture positivity, including inflammation biomarkers, the source joint, quality control metrics, and days of specimen transport to the laboratory. SF culture false-positivity was calculated based on the ICM category of "not-infected" or low inflammation score. Results Overall, 13.3% (23,974/180,317) of the samples were associated with a positive culture result: 12.5% for knee samples, 20.3% for hip samples, and 14.7% for shoulder samples. The false-positive SF culture rate among 131,949 samples classified as "not-infected" by the modified 2018 ICM definition was 0.47% (95%CI: 0.43 to 0.51%). Stratification by joint revealed a false-positive rate of 0.34% (95%CI: 0.31 to 0.38%) for knee samples, 1.24% (95%CI: 1.05 to 1.45%) for hip samples, and 3.02% (95%CI: 2.40 to 3.80%) for shoulder samples, with p < 0.0001 for all comparisons. The false-positive SF culture rate among 90,156 samples, representing half of all samples with the lowest standardized inflammation scores, was 0.47% (95%CI: 0.43 to 0.52%). Stratification by joint revealed a false-positive rate of 0.33% (95%CI: 0.29 to 0.37%) for knee samples, 1.45% (95%CI: 1.19 to 1.77%) for hip samples, and 3.09% (95%CI: 2.41 to 3.95%) for shoulder samples, with p<0.0001 for all comparisons. Multivariate logistic regression demonstrated the joint source (hip, shoulder) and poor sample quality as collection-based factors associated with a false-positive culture. Evaluation of a cohort of samples selected to minimize collection-based causes of false-positive culture demonstrated a false-positive rate of 0.30%, representing the ceiling limit for laboratory-based SF culture false-positivity. Conclusions This study utilizes two methods to estimate the false-positive SF culture rate at a single specialized clinical laboratory, demonstrating an overall false-positive rate of approximately 0.5%. Stratification of samples by source joint demonstrated that periprosthetic SF from the shoulder and hip have a substantially higher false-positive culture rate than that of the knee. The lowest false-positive SF culture rate (0.30%) was observed among samples from the knee-passing quality control. Culture positivity due to contamination at this specific laboratory is less than 0.30% because all specimens undergo identical processing.

Voriconazole is cytotoxic at locally delivered concentrations: a pilot study.

BACKGROUND: Fungal infections are rare but major problems when they involve orthopaedic implants. Preferred treatment in North America is two-staged: resection and then delayed reconstruction, with local delivery of an antifungal between stages. The effect of voriconazole, a hydrophobic antifungal, on local tissues and wound healing is unclear. QUESTIONS/PURPOSES: We asked: (1) Is voriconazole cytotoxic to fibroblasts or osteoblasts at target concentrations for local delivery? And (2) if cytotoxic, can fibroblasts or osteoblasts resume proliferation after voriconazole is removed? METHODS: We exposed 5000 fibroblasts or osteoblasts/well to voriconazole concentrations of 0, 1, 5, 10, 25, 100, 500, 1000, 5000, 10,000, and 20,000 µg/mL (n=4 wells/concentration) in 24-well plates. At 3 and 7 days, cell growth was assessed with alamarBlue® and light microscopy. After Day 7, exposure to voriconazole was stopped and incubation continued for 4 days in medium with no voriconazole. On Day 11, cell growth (recovery) was assessed with alamarBlue® and light microscopy. RESULTS: Increasing voriconazole concentration to more than 100 µg/mL decreased osteoblast and fibroblast growth. Cell growth recovered after 7 days' exposure to 1000 µg/mL or less. CONCLUSIONS: Voriconazole is cytotoxic to osteoblasts and fibroblasts, but cell growth recovers over 4 days after exposure to 1000 µg/mL or less. CLINICAL RELEVANCE: Cytotoxicity seen from voriconazole to mouse osteoblasts and fibroblasts occurs at concentrations achievable clinically from local delivery. It may be prudent to limit the dose of voriconazole in antibiotic-loaded bone cement.

Distribution of locally delivered antimicrobials is limited by cortical bone: a pilot study.

BACKGROUND: Local delivery is required to achieve the high antimicrobial concentrations needed to treat biofilm-forming infections. The delivery site is commonly either in the intramedullary canal or at the periosteal surface. It is unknown whether locally delivered antimicrobials are transported transcortically between the endosteal and periosteal surfaces when the infection involves the opposite surface. QUESTIONS/PURPOSES: (1) Are antimicrobials transported transcortically between the endosteal and periosteal surfaces over time? And (2) are transcortical antimicrobials transported uniformly over the cortical surface? METHODS: To study transcortical antimicrobial transport, 12 human cadaveric femoral segments obtained from two women aged 63 and 64 years and one man aged 64 years were filled with antimicrobials. Three diaphyseal segments were filled with 5 wt% vancomycin in an N-isopropylacrylamide-based hydrogel and eluted in phosphate-buffered saline under infinite-sink conditions for 5 days; vancomycin was assayed by high-performance liquid chromatography. Nine segments (three infraisthmal diaphysis, three metaphysis, three epiphysis) embedded in 0.1% agarose gel were filled with aqueous doxycycline (400 µg/mL) and imaged under ultraviolet light for fluorescence on the periosteal surface at 15-minute intervals for 3 days. RESULTS: Transcortical vancomycin elution occurred: 8.65 mg during Day 1 and 26.5 mg by Day 5. Fluorescence from transcortical doxycycline transport was only visualized at focal locations corresponding to vascular foramina, appearing first at 5 to 10 minutes, with none over the majority of the periosteal surface for up to 24 hours. CONCLUSIONS: Transcortical transport of locally delivered antimicrobials occurs primarily through vascular foramina. CLINICAL RELEVANCE: Transcortical antimicrobial transported may not be adequate to achieve therapeutic levels for infection on the far side of an intact cortex.

Voriconazole is delivered from antifungal-loaded bone cement.

BACKGROUND: Local delivery of antifungals is an important modality in managing orthopaedic fungal infection. Voriconazole is a powder antifungal suitable for addition to bone cement that is released from bone cement but the mechanical properties of antimicrobial-loaded bone cement (ALBC) made with voriconazole are unknown. QUESTIONS/PURPOSES: (1) Is voriconazole release dose-dependent? (2) Is released voriconazole active? (3) Is the loss of ALBC's compressive strength caused by voriconazole dose- and elution-dependent? METHODS: Sixty standard test cylinders were fabricated with ALBC: 300 or 600 mg voriconazole per batch eluted for 30 days in deionized water. Voriconizole concentration in the eluate was measured using high-performance liquid chromatography. Cumulative-released voriconizole was calculated. Biologic activity was tested. Compressive strength was measured before and after elution. The effect of dose and time on release and compressive strength were analyzed using repeated-measure analysis of variance. RESULTS: Fifty-seven percent and 63% of the loaded voriconazole were released by Day 30 for the 300-mg and 600-mg formulations, respectively. The released voriconazole was active on bioassay. Compressive strength was reduced from 79 MPa to 53 MPa and 69 MPa to 31 MPa by 30 days for the 300-mg and 600-mg formulations, respectively. CONCLUSIONS: Voriconazole release from ALBC increases with dose and is bioactive. Loss in compressive strength is greater after elution and with higher dose. CLINICAL RELEVANCE: Three hundred milligrams of voriconazole in ALBC would be expected to deliver meaningful amounts of active drug in vivo. The compressive strength of ALBC with 600 mg voriconazole is less than expected compared to commonly used antibacterials.

Have levels of evidence improved the quality of orthopaedic research?

BACKGROUND: Since 2003 many orthopaedic journals have adopted grading systems for levels of evidence (LOE). It is unclear if the quality of orthopaedic literature has changed since LOE was introduced. QUESTIONS/PURPOSES: We asked three questions: (1) Have the overall number and proportion of Level I and II studies increased in the orthopaedic literature since the introduction of LOE? (2) Is a similar pattern seen in individual orthopaedic subspecialty journals? (3) What is the interobserver reliability of grading LOE? METHODS: We assigned LOE to therapeutic studies published in 2000, 2005, and 2010 in eight major orthopaedic subspecialty journals. Number and proportion of Level I and II publications were determined. Data were evaluated using log-linear models. Twenty-six reviewers (13 residents and 13 attendings) graded LOE of 20 blinded therapeutic articles from the Journal of Bone and Joint Surgery for 2009. Interobserver agreement relative to the Journal of Bone and Joint Surgery was assessed using a weighted kappa. RESULTS: The total number of Level I and II publications in subspecialty journals increased from 150 in 2000 to 239 in 2010. The proportion of high-quality publications increased with time (p < 0.001). All subspecialty journals other than the Journal of Pediatric Orthopaedics and the Journal of Orthopaedic Trauma showed a similar behavior. Average weighted kappa was 0.791 for residents and 0.842 for faculty (p = 0.209). CONCLUSIONS: The number and proportion of Level I and II publications have increased. LOE can be graded reliably with high interobserver agreement. The number and proportion of high-level studies should continue to increase.