Image-Guided Deployment and Monitoring of a Novel Tungsten Nanoparticle-Infused Radiopaque Absorbable Inferior Vena Cava Filter in a Swine Model.

PURPOSE: To improve radiopacity of radiolucent absorbable poly-p-dioxanone (PPDO) inferior vena cava filters (IVCFs) and demostrate their effectiveness in clot-trapping ability. MATERIALS AND METHODS: Tungsten nanoparticles (WNPs) were incorporated along with polyhydroxybutyrate (PHB), polycaprolactone (PCL), and polyvinylpyrrolidone (PVP) polymers to increase the surface adsorption of WNPs. The physicochemical and in vitro and in vivo imaging properties of PPDO IVCFs with WNPs with single-polymer PHB (W-P) were compared with those of WNPs with polymer blends consisting of PHB, PCL, and PVP (W-PB). RESULTS: In vitro analyses using PPDO sutures showed enhanced radiopacity with either W-P or W-PB coating, without compromising the inherent physicomechanical properties of the PPDO sutures. W-P- and W-PB-coated IVCFs were deployed successfully into the inferior vena cava of pig models with monitoring by fluoroscopy. At the time of deployment, W-PB-coated IVCFs showed a 2-fold increase in radiopacity compared to W-P-coated IVCFs. Longitudinal monitoring of in vivo IVCFs over a 12-week period showed a drastic decrease in radiopacity at Week 3 for both filters. CONCLUSIONS: The results highlight the utility of nanoparticles (NPs) and polymers for enhancing radiopacity of medical devices. Different methods of incorporating NPs and polymers can still be explored to improve the effectiveness, safety, and quality of absorbable IVCFs.

Correction for partial volume averaging in the quantification of radiopaque nanomaterial-embedded resorbable polymers.

Resorbable inferior vena cava (IVC) filters require embedded contrast for image-guided placement and integrity monitoring. We calculated correction factors to account for partial volume averaging of thin nanoparticle (NP)-embedded materials, accounting for object and slice thicknesses, background signal, and nanoparticle concentration. We used phantoms containing polycaprolactone disks embedded with bismuth (Bi) or ytterbium (Yb): 0.4- to 1.2-mm-thick disks of 20 mg ml-1NPs (thickness phantom), 0.4-mm-thick disks of 0-20 mg ml-1NPs in 2 mg ml-1iodine (concentration phantom), and 20 mg ml-1NPs in 0.4-mm-thick disks in 0-10 mg ml-1iodine (background phantom). Phantoms were scanned on a dual-source CT with 80, 90, 100, and 150 kVp with tin filtration and reconstructed at 1.0- to 1.5-mm slice thickness with a 0.1-mm interval. Following scanning, disks were processed for inductively coupled plasma optical emission spectrometry (ICP-OES) to determine NP concentration. Mean and maximum CT numbers (HU) of all disks were measured over a 0.5-cm2area for each kVp. HU was converted to concentration using previously measured calibrations. Concentration measurements were corrected for partial volume averaging by subtracting residual slice background and extrapolating disk thickness to both nominal and measured slice sensitivity profiles (SSP, mm). Slice thickness to agreement (STTA, mm) was calculated by replacing the CT-derived concentrations with ICP-OES measurements and solving for thickness. Slice thickness correction factors improved agreement with ICP-OES for all measured data. Yb corrections resulted in lower STTA than Bi corrections in the concentration phantom (1.01 versus 1.31 STTA/SSP, where 1.0 is perfect agreement), phantoms with varying thickness (1.30 versus 1.87 STTA/SSP), and similar ratio in phantoms with varying background iodine concentration (1.34 versus 1.35 STTA/SSP). All measured concentrations correlated strongly with ICP-OES and all corrections for partial volume averaging increased agreement with ICP-OES concentration, demonstrating potential for monitoring the integrity of thin IVC resorbable filters with CT.

Image-guided deployment and monitoring of a novel tungsten nanoparticleâ€"infused radiopaque absorbable inferior vena cava filter in pigs.

The use of absorbable inferior vena cava filters (IVCFs) constructed with poly-p-dioxanone (PPDO) eliminates risks and complications associated with the use of retrievable metallic filters. Radiopacity of radiolucent PPDO IVCFs can be improved with the incorporation of nanoparticles (NPs) made of high-atomic number materials such as gold and bismuth. In this study, we focused on incorporating tungsten NPs (WNPs), along with polyhydroxybutyrate (PHB), polycaprolactone (PCL), and polyvinylpyrrolidone (PVP) polymers to increase the surface adsorption of the WNPs. We compared the imaging properties of WNPs with single-polymer PHB (W-P) and WNPs with polymer blends consisting of PHB, PCL, and PVP (W-PB). Our in vitro analyses using PPDO sutures showed enhanced radiopacity with either W-P or W-PB coating, without compromising the inherent physico-mechanical properties of the PPDO sutures. We observed a more sustained release of WNPs from W-PB-coated sutures than W-P-coated sutures. We successfully deployed W-P- and W-PB-coated IVCFs into the inferior vena cava of pig models, with monitoring by fluoroscopy. At the time of deployment, W-PB-coated IVCFs showed a 2-fold increase in radiopacity compared to W-P-coated IVCFs. Longitudinal monitoring of in vivo IVCFs over a 12-week period showed a drastic decrease in radiopacity at week 3 for both filters. Results of this study highlight the utility of NPs and polymers for enhancing radiopacity of medical devices; however, different methods of incorporating NPs and polymers can still be explored to improve the efficacy, safety, and quality of absorbable IVCFs.

Synthetic Megavoltage Cone Beam Computed Tomography Image Generation for Improved Contouring Accuracy of Cardiac Pacemakers.

In this study, we aimed to enhance the contouring accuracy of cardiac pacemakers by improving their visualization using deep learning models to predict MV CBCT images based on kV CT or CBCT images. Ten pacemakers and four thorax phantoms were included, creating a total of 35 combinations. Each combination was imaged on a Varian Halcyon (kV/MV CBCT images) and Siemens SOMATOM CT scanner (kV CT images). Two generative adversarial network (GAN)-based models, cycleGAN and conditional GAN (cGAN), were trained to generate synthetic MV (sMV) CBCT images from kV CT/CBCT images using twenty-eight datasets (80%). The pacemakers in the sMV CBCT images and original MV CBCT images were manually delineated and reviewed by three users. The Dice similarity coefficient (DSC), 95% Hausdorff distance (HD95), and mean surface distance (MSD) were used to compare contour accuracy. Visual inspection showed the improved visualization of pacemakers on sMV CBCT images compared to original kV CT/CBCT images. Moreover, cGAN demonstrated superior performance in enhancing pacemaker visualization compared to cycleGAN. The mean DSC, HD95, and MSD for contours on sMV CBCT images generated from kV CT/CBCT images were 0.91 ± 0.02/0.92 ± 0.01, 1.38 ± 0.31 mm/1.18 ± 0.20 mm, and 0.42 ± 0.07 mm/0.36 ± 0.06 mm using the cGAN model. Deep learning-based methods, specifically cycleGAN and cGAN, can effectively enhance the visualization of pacemakers in thorax kV CT/CBCT images, therefore improving the contouring precision of these devices.

Automated contouring and statistical process control for plan quality in a breast clinical trial.

Background and purpose: Automatic review of breast plan quality for clinical trials is time-consuming and has some unique challenges due to the lack of target contours for some planning techniques. We propose using an auto-contouring model and statistical process control to independently assess planning consistency in retrospective data from a breast radiotherapy clinical trial. Materials and methods: A deep learning auto-contouring model was created and tested quantitatively and qualitatively on 104 post-lumpectomy patients' computed tomography images (nnUNet; train/test: 80/20). The auto-contouring model was then applied to 127 patients enrolled in a clinical trial. Statistical process control was used to assess the consistency of the mean dose to auto-contours between plans and treatment modalities by setting control limits within three standard deviations of the data's mean. Two physicians reviewed plans outside the limits for possible planning inconsistencies. Results: Mean Dice similarity coefficients comparing manual and auto-contours was above 0.7 for breast clinical target volume, supraclavicular and internal mammary nodes. Two radiation oncologists scored 95% of contours as clinically acceptable. The mean dose in the clinical trial plans was more variable for lymph node auto-contours than for breast, with a narrower distribution for volumetric modulated arc therapy than for 3D conformal treatment, requiring distinct control limits. Five plans (5%) were flagged and reviewed by physicians: one required editing, two had clinically acceptable variations in planning, and two had poor auto-contouring. Conclusions: An automated contouring model in a statistical process control framework was appropriate for assessing planning consistency in a breast radiotherapy clinical trial.

Bismuth Nanoparticle and Polyhydroxybutyrate Coatings Enhance the Radiopacity of Absorbable Inferior Vena Cava Filters for Fluoroscopy-Guided Placement and Longitudinal Computed Tomography Monitoring in Pigs.

Inferior vena cava filters (IVCFs) constructed with poly-p-dioxanone (PPDO) are promising alternatives to metallic filters and their associated risks and complications. Incorporating high-Z nanoparticles (NPs) improves PPDO IVCFs' radiopacity without adversely affecting their safety or performance. However, increased radiopacity from these studies are insufficient for filter visualization during fluoroscopy-guided PPDO IVCF deployment. This study focuses on the use of bismuth nanoparticles (BiNPs) as radiopacifiers to render sufficient signal intensity for the fluoroscopy-guided deployment and long-term CT monitoring of PPDO IVCFs. The use of polyhydroxybutyate (PHB) as an additional layer to increase the surface adsorption of NPs resulted in a 2-fold increase in BiNP coating (BiNP-PPDO IVCFs, 3.8%; BiNP-PPDO + PHB IVCFs, 6.2%), enabling complete filter visualization during fluoroscopy-guided IVCF deployment and, 1 week later, clot deployment. The biocompatibility, clot-trapping efficacy, and mechanical strength of the control PPDO (load-at-break, 6.23 ± 0.13 kg), BiNP-PPDO (6.10 ± 0.09 kg), and BiNP-PPDO + PHB (6.15 ± 0.13 kg) IVCFs did not differ significantly over a 12-week monitoring period in pigs. These results indicate that BiNP-PPDO + PHB can increase the radiodensity of a novel absorbable IVCF without compromising device strength. Visualizing the device under conventional radiographic imaging is key to allow safe and effective clinical translation of the device.

Optimization of the differentiation and quantification of high-Z nanoparticles incorporated in medical devices for CT-guided interventions.

PURPOSE: Material differentiation has been made possible using dual-energy computed tomography (DECT), in which the unique, energy-dependent attenuating characteristics of materials can provide new diagnostic information. One promising application is the clinical integration of biodegradable polymers as temporary implantable medical devices impregnated with high-atomic number (high-Z) materials. The purpose of this study was to explore the incorporation of high atomic number (high-Z) contrast materials in a bioresorbable inferior vena cava filter for advanced CT-based monitoring of its location and differentiating from surrounding materials. MATERIALS AND METHODS: Imaging optimization and calibration studies were performed using a body phantom. The dual-energy CT (DECT) ratios for iron, zirconium, barium, gadolinium, ytterbium, tantalum, tungsten, gold, and bismuth were generated for peak kilovoltage combinations of 80/150Sn, 90/150Sn, and 100/150Sn kVp in dual-source CT via linear regression of the CT numbers at low and high energies. A secondary calibration of the material map to the nominal material concentration was generated to correct for use of materials other than iodine. CT number was calibrated to the material concentration based on single-energy CT (SECT) with additional filtration (150Sn kVp). These quantification methods were applied to monitoring of biodegradable inferior vena cava filters (IVCFs) made of braided poly(p-dioxanone) sutures infused with ultrasmall bismuth nanoparticles (BiNPs) implanted in an adult domestic pig. RESULTS: Qualitative material differentiation was optimal for high-Z (>73) contrast agents in DECT. However, quantification became nonlinear and inaccurate as the K-edge of the material increased. Using the high-energy (150Sn kVp) data component as a SECT scan, the linearity of quantification curves was maintained with lower limits of detection than with DECT. Among the materials tested, bismuth had optimal differentiation from iodine in DECT while maintaining increased contrast in high-energy SECT for quantification (11.5% error). Coating the IVCF with BiNPs resulted in markedly greater radiopacity (maximum CT number, 2028 HU) than that of an uncoated IVCF (maximum CT number, 127 HU). Using DECT imaging and processing, the BiNP-IVCF could be clearly differentiated from iodine contrast injected into the inferior vena cava of the pig. CONCLUSIONS: These findings may improve widespread integration of medical devices incorporated with high-Z materials into the clinic, where technical success, possible complications, and device integrity can be assessed intraoperatively and postoperatively via DECT imaging.

Radiopaque scaffolds based on electrospun iodixanol/polycaprolactone fibrous composites.

Grafts based on biodegradable polymer scaffolds are increasingly used in tissue-engineering applications as they facilitate natural tissue regeneration. However, monitoring the position and integrity of these scaffolds over time is challenging due to radiolucency. In this study, we used an electrospinning method to fabricate biodegradable scaffolds based on polycaprolactone (PCL) and iodixanol, a clinical contrast agent. Scaffolds were implanted subcutaneously into C57BL/6 mice and monitored in vivo using longitudinal X-ray imaging and micro-computed tomography (CT). The addition of iodixanol altered the physicochemical properties of the PCL scaffold; notably, as the iodixanol concentration increased, the fiber diameter decreased. Radiopacity was achieved with corresponding signal enhancement as iodine concentration increased while exhibiting a steady time-dependent decrease of 0.96% per day in vivo. The electrospun scaffolds had similar performance with tissue culture-treated polystyrene in supporting the attachment, viability, and proliferation of human mesenchymal stem cells. Furthermore, implanted PCL-I scaffolds had more intense acute inflammatory infiltrate and thicker layers of maturing fibrous tissue. In conclusion, we developed radiopaque, biodegradable, biocompatible scaffolds whose position and integrity can be monitored noninvasively. The successful development of other imaging enhancers may further expand the use of biodegradable scaffolds in tissue engineering applications.

Radiation Sciences Education in Africa: An Assessment of Current Training Practices and Evaluation of a High-Yield Course in Radiation Biology and Radiation Physics.

PURPOSE: Formal education in the radiation sciences is critical for the safe and effective delivery of radiotherapy. Practices and patterns of radiation sciences education and trainee performance in the radiation sciences are poorly described. This study assesses the current state of radiation sciences education in Africa and evaluates a high-yield, on-site educational program in radiation biology and radiation physics for oncology and radiation therapy trainees in Africa. METHODS: An anonymous survey was distributed to members of the African Organization for Research and Treatment in Cancer Training Interest Group to assess current attitudes and practices toward radiation sciences education. A 2-week, on-site educational course in radiation biology and radiation physics was conducted at the Cancer Diseases Hospital in Lusaka, Zambia. Pre- and postcourse assessments in both disciplines were administered to gauge the effectiveness of an intensive high-yield course in the radiation sciences. RESULTS: Significant deficiencies were identified in radiation sciences education, especially in radiation biology. Lack of expert instructors in radiation biology was reported by half of all respondents and was the major contributing factor to deficient education in the radiation sciences. The educational course resulted in marked improvements in radiation biology assessment scores (median pre- and posttest scores, 27% and 55%, respectively; P < .0001) and radiation physics assessment scores (median pre- and posttest scores, 30% and 57.5%, respectively; P < .0001). CONCLUSION: Radiation sciences education in African oncology training programs is inadequate. International collaboration between expert radiation biology and radiation physics instructors can address this educational deficiency and improve trainee competence in the foundational radiation sciences that is critical for the safe and effective delivery of radiotherapy.

In vivo performance of gold nanoparticle-loaded absorbable inferior vena cava filters in a swine model.

Absorbable inferior vena cava filters (IVCFs) offer a promising alternative to metallic retrievable filters in providing protection against pulmonary embolism (PE) for patients contraindicated for anticoagulant therapy. However, because absorbable filters are not radiopaque, monitoring of the filter using conventional X-ray imaging modalities (e.g. plain film radiographs, computed tomography [CT] and fluoroscopy) during deployment and follow-up is not possible and represents a potential obstacle to widespread clinical integration of the device. Here, we demonstrate that gold nanoparticles (AuNPs) infused into biodegradable filters made up of poly-p-dioxanone (PPDO) may improve device radiopacity without untoward effects on device efficacy and safety, as assessed in swine models for 12 weeks. The absorbable AuNP-infused filters demonstrated significantly improved visualization using CT without affecting tensile strength, in vitro degradation, in vivo resorption, or thrombus-capturing efficacy, as compared to similar non-AuNPs infused resorbable IVCFs. This study presents a significant advancement to the development of imaging enhancers for absorbable IVCFs.

Radiation-induced lung toxicity in mice irradiated in a strong magnetic field.

Strong magnetic fields affect radiation dose deposition in MRI-guided radiation therapy systems, particularly at interfaces between tissues of differing densities such as those in the thorax. In this study, we evaluated the impact of a 1.5 T magnetic field on radiation-induced lung damage in C57L/J mice. We irradiated 140 mice to the whole thorax with parallel-opposed Co-60 beams to doses of 0, 9.0, 10.0, 10.5, 11.0, 12.0, or 13.0 Gy (20 mice per dose group). Ten mice per dose group were irradiated while a 1.5 T magnetic field was applied transverse to the radiation beam and ten mice were irradiated with the magnetic field set to 0 T. We compared survival and noninvasive assays of radiation-induced lung damage, namely respiratory rate and metrics derived from thoracic cone-beam CTs, between the two sets of mice. We report two main results. First, the presence of a transverse 1.5 T field during irradiation had no impact on survival of C57L/J mice. Second, there was a small but statistically significant effect on noninvasive assays of radiation-induced lung damage. These results provide critical safety data for the clinical introduction of MRI-guided radiation therapy systems.

In vivo imaging of radiopaque resorbable inferior vena cava filter infused with gold nanoparticles.

Radiopaque resorbable inferior vena cava filter (IVCF) were developed to offer a less expensive alternative to assessing filter integrity in preventing pulmonary embolism for the recommended prophylactic period and then simply vanishes without intervention. In this study, we determined the efficacy of gold nanoparticle (AuNP)-infused poly-p-dioxanone (PPDO) as an IVCF in a swine model. Infusion into PPDO loaded 1.14±0.08 % AuNP by weight as determined by elemental analysis. The infusion did not alter PPDO's mechanical strength nor crystallinity (Kruskal-Wallis one-way ANOVA, p<0.05). There was no cytotoxicity observed (one-way ANOVA, p<0.05) when tested against RF24 and MRC5 cells. Gold content in PPDO was maintained at ~2000 ppm during the 6-week incubation in PBS at 37°C. As a proof-of-concept, two pigs were deployed with IVCF, one with AuNP-PPDO and the other without coating. Results show that the stent ring of AuNP-PPDO was highly visible even in the presence of iodine-based contrast agent and after clot introduction, but not of the uncoated IVCF. Autopsy at two weeks post-implantation showed AuNP-PPDO filter was endothelialized onto the IVC wall, and no sign of filter migration was observed. The induced clot was also still trapped within the AuNP-PPDO IVCF. As a conclusion, we successfully fabricated AuNP-infused PPDO IVCF that is radiopaque, has robust mechanical strength, biocompatible, and can be imaged effectively in vivo. This suggests the efficacy of this novel, radiopaque, absorbable IVCF for monitoring its position and integrity over time, thus increasing the safety and efficacy of deep vein thrombosis treatment.

Changes in the pelvic anatomy after an IMRT treatment fraction of prostate cancer.

PURPOSE: To quantify the three-dimensional variations of pelvic anatomy after a single treatment fraction. METHODS AND MATERIALS: Forty-six prostate cancer patients underwent computed tomography (CT) scanning with an in-room CT-on-rail system, before and immediately after one intensity-modulated radiotherapy (IMRT) session. To study the soft-tissue anatomy changes, the pre- and post-treatment CT images were registered using the bony structure with an in-house image registration software system. The center of volume for both the prostate and seminal vesicles was used to assess the relative displacement of the same structure after the treatment fraction. RESULTS: During one treatment fraction (21 +/- 4 min), both the prostate and seminal vesicles showed statistically significant systematic trends in the superior and anterior directions of the patient's anatomy. The net increase in bladder volume was huge (127 +/- 79 cm(3)), yet this change did not translate into large target displacements. Although the population mean displacements in either direction were 1.3 +/- 2.9 mm for the prostate and 1.2 +/- 4.1 mm for the seminal vesicles in the anterior direction, a few patients had displacements as large as 8.4 mm and 15.6 mm, respectively. These large displacements correlated strongly (p < 0.001) with large rectal volume increases caused by gaseous build-up in the rectum. CONCLUSION: The observed intrafraction variations in anatomy during prostate IMRT sessions suggest that, for any given fraction, the organ motion and volume changes can potentially lead to compromised target coverage in about 15% of patients in whom the prostate position shifted >4 mm.

Is a 3-mm intrafractional margin sufficient for daily image-guided intensity-modulated radiation therapy of prostate cancer?

PURPOSE: To determine whether a 3-mm isotropic target margin adequately covers the prostate and seminal vesicles (SVs) during administration of an intensity-modulated radiation therapy (IMRT) treatment fraction, assuming that daily image-guided setup is performed just before each fraction. MATERIALS AND METHODS: In-room computed tomographic (CT) scans were acquired immediately before and after a daily treatment fraction in 46 patients with prostate cancer. An eight-field IMRT plan was designed using the pre-fraction CT with a 3-mm margin and subsequently recalculated on the post-fraction CT. For convenience of comparison, dose plans were scaled to full course of treatment (75.6 Gy). Dose coverage was assessed on the post-treatment CT image set. RESULTS: During one treatment fraction (21.4+/-5.5 min), there were reductions in the volumes of the prostate and SVs receiving the prescribed dose (median reduction 0.1% and 1.0%, respectively, p<0.001) and in the minimum dose to 0.1 cm(3) of their volumes (median reduction 0.5 and 1.5 Gy, p<0.001). Of the 46 patients, three patients' prostates and eight patients' SVs did not maintain dose coverage above 70 Gy. Rectal filling correlated with decreased percentage-volume of SV receiving 75.6, 70, and 60 Gy (p<0.02). CONCLUSIONS: The 3-mm intrafractional margin was adequate for prostate dose coverage. However, a significant subset of patients lost SV dose coverage. The rectal volume change significantly affected SV dose coverage. For advanced-stage prostate cancers, we recommend to use larger margins or improve organ immobilization (such as with a rectal balloon) to ensure SV coverage.

Treatment Planning System Calculation Errors Are Present in Most Imaging and Radiation Oncology Core-Houston Phantom Failures.

PURPOSE: The anthropomorphic phantom program at the Houston branch of the Imaging and Radiation Oncology Core (IROC-Houston) is an end-to-end test that can be used to determine whether an institution can accurately model, calculate, and deliver an intensity modulated radiation therapy dose distribution. Currently, institutions that do not meet IROC-Houston's criteria have no specific information with which to identify and correct problems. In the present study, an independent recalculation system was developed to identify treatment planning system (TPS) calculation errors. METHODS AND MATERIALS: A recalculation system was commissioned and customized using IROC-Houston measurement reference dosimetry data for common linear accelerator classes. Using this system, 259 head and neck phantom irradiations were recalculated. Both the recalculation and the institution's TPS calculation were compared with the delivered dose that was measured. In cases in which the recalculation was statistically more accurate by 2% on average or 3% at a single measurement location than was the institution's TPS, the irradiation was flagged as having a "considerable" institutional calculation error. The error rates were also examined according to the linear accelerator vendor and delivery technique. RESULTS: Surprisingly, on average, the reference recalculation system had better accuracy than the institution's TPS. Considerable TPS errors were found in 17% (n=45) of the head and neck irradiations. Also, 68% (n=13) of the irradiations that failed to meet the IROC-Houston criteria were found to have calculation errors. CONCLUSIONS: Nearly 1 in 5 institutions were found to have TPS errors in their intensity modulated radiation therapy calculations, highlighting the need for careful beam modeling and calculation in the TPS. An independent recalculation system can help identify the presence of TPS errors and pass on the knowledge to the institution.

Radiopaque Resorbable Inferior Vena Cava Filter Infused with Gold Nanoparticles.

Failure to remove a retrievable inferior vena cava (IVC) filter can cause severe complications with high treatment costs. Polydioxanone (PPDO) has been shown to be a good candidate material for resorbable IVC filters. However, PPDO is radioluscent under conventional imaging modalities. Thus, the positioning and integrity of these PPDO filters cannot be monitored by computed tomography (CT) or x-ray. Here we report the development of radiopaque PPDO IVC filters based on gold nanoparticles (AuNPs). Commercially available PPDO sutures were infused with AuNPs. Scanning electron microscopy analysis confirmed the presence of AuNP on the surface of PPDO. Micro-CT and x-ray images of the AuNP-infused PPDO sutures showed significant signal enhancement compared to untreated PPDO sutures. Elemental analysis showed that gold loading exceeded 2000 ppm. Tensile strength and in vitro cytotoxicity showed no significant difference between AuNP-infused and untreated PPDO. In a 10-week stability study, neither the gold content nor the radiopacity of the infused PPDO sutures significantly changed in the first 6 weeks. The increased attenuation of AuNP-infused PPDO sutures indicates their major advantage as a radiopaque resorbable filter material, as the radiopacity allows monitoring of the position and integrity of the filter, thereby increasing its safety and efficacy.

Technical Note: A Monte Carlo study of magnetic-field-induced radiation dose effects in mice.

PURPOSE: Magnetic fields are known to alter radiation dose deposition. Before patients receive treatment using an MRI-linear accelerator (MRI-Linac), preclinical studies are needed to understand the biological consequences of magnetic-field-induced dose effects. In the present study, the authors sought to identify a beam energy and magnetic field strength combination suitable for preclinical murine experiments. METHODS: Magnetic field dose effects were simulated in a mouse lung phantom using various beam energies (225 kVp, 350 kVp, 662 keV [Cs-137], 2 MV, and 1.25 MeV [Co-60]) and magnetic field strengths (0.75, 1.5, and 3 T). The resulting dose distributions were compared with those in a simulated human lung phantom irradiated with a 6 or 8 MV beam and orthogonal 1.5 T magnetic field. RESULTS: In the human lung phantom, the authors observed a dose increase of 45% and 54% at the soft-tissue-to-lung interface and a dose decrease of 41% and 48% at the lung-to-soft-tissue interface for the 6 and 8 MV beams, respectively. In the mouse simulations, the magnetic fields had no measurable effect on the 225 or 350 kVp dose distribution. The dose increases with the Cs-137 beam for the 0.75, 1.5, and 3 T magnetic fields were 9%, 29%, and 42%, respectively. The dose decreases were 9%, 21%, and 37%. For the 2 MV beam, the dose increases were 16%, 33%, and 31% and the dose decreases were 9%, 19%, and 30%. For the Co-60 beam, the dose increases were 19%, 54%, and 44%, and the dose decreases were 19%, 42%, and 40%. CONCLUSIONS: The magnetic field dose effects in the mouse phantom using a Cs-137, 3 T combination or a Co-60, 1.5 or 3 T combination most closely resemble those in simulated human treatments with a 6 MV, 1.5 T MRI-Linac. The effects with a Co-60, 1.5 T combination most closely resemble those in simulated human treatments with an 8 MV, 1.5 T MRI-Linac.

Spot scanning proton therapy for malignancies of the base of skull: treatment planning, acute toxicities, and preliminary clinical outcomes.

PURPOSE: To describe treatment planning techniques and early clinical outcomes in patients treated with spot scanning proton therapy for chordoma or chondrosarcoma of the skull base. METHODS AND MATERIALS: From June 2010 through August 2011, 15 patients were treated with spot scanning proton therapy for chordoma (n=10) or chondrosarcoma (n=5) at a single institution. Toxicity was prospectively evaluated and scored weekly and at all follow-up visits according to Common Terminology Criteria for Adverse Events, version 3.0. Treatment planning techniques and dosimetric data were recorded and compared with those of passive scattering plans created with clinically applicable dose constraints. RESULTS: Ten patients were treated with single-field-optimized scanning beam plans and 5 with multifield-optimized intensity modulated proton therapy. All but 2 patients received a simultaneous integrated boost as well. The mean prescribed radiation doses were 69.8 Gy (relative biological effectiveness [RBE]; range, 68-70 Gy [RBE]) for chordoma and 68.4 Gy (RBE) (range, 66-70) for chondrosarcoma. In comparison with passive scattering plans, spot scanning plans demonstrated improved high-dose conformality and sparing of temporal lobes and brainstem. Clinically, the most common acute toxicities included fatigue (grade 2 for 2 patients, grade 1 for 8 patients) and nausea (grade 2 for 2 patients, grade 1 for 6 patients). No toxicities of grades 3 to 5 were recorded. At a median follow-up time of 27 months (range, 13-42 months), 1 patient had experienced local recurrence and a second developed distant metastatic disease. Two patients had magnetic resonance imaging-documented temporal lobe changes, and a third patient developed facial numbness. No other subacute or late effects were recorded. CONCLUSIONS: In comparison to passive scattering, treatment plans for spot scanning proton therapy displayed improved high-dose conformality. Clinically, the treatment was well tolerated, and with short-term follow-up, disease control rates and toxicity profiles were favorable.

Anatomic variation and dosimetric consequences of neoadjuvant hormone therapy before radiation therapy for prostate cancer.

PURPOSE: To characterize anatomic variation during neoadjuvant androgen deprivation (NAD) and determine a treatment planning strategy to maintain acceptable normal tissue dose while treating potential microscopic disease in the original (pre-NAD) tumor bed. METHODS AND MATERIALS: We retrospectively examined the effects of treating the post-NAD anatomy with plans derived before and after NAD in a group of 44 patients enrolled in an institutional review board-approved protocol. An 8-field intensity modulated radiation therapy (IMRT) treatment plan was generated on anatomy both before and after NAD for the first 35 patients. The pre-NAD treatment plan was applied to the post-NAD anatomy to evaluate the effect of complete pre-NAD tumor bed treatment on normal tissue sparing, and the post-NAD treatment plan was applied to the pre-NAD anatomy to investigate whether microscopic disease might go untreated in the location of the pre-NAD tumor bed. RESULTS: The prostate decreased in volume by an average of about 14 cm(3) (24.3%) and was correlated with NAD duration (P = .002). The prostate center of volume systematically shifted in the inferior direction (mean = 1.4 mm, P = .005) and inferior shift was correlated with absolute volume reduction of the prostate (P = .044) in a multivariate model containing rectal and bladder volume change and initial prostate volume. Pre-NAD treatment planning resulted in a significant increase in the bladder volume (P < .01) but little increase in the rectal volume treated to all dose levels. Post-NAD treatment planning resulted in decreased treatment of the prostate and seminal vesicles (on the pre-NAD anatomy) at the prescribed and 95% isodose levels (prostate: P = .033 and 0.025; seminal vesicles: P < .001). CONCLUSIONS: Anisotropic volume reduction of the prostate was found during NAD and correlated with NAD duration. Post-NAD based treatment planning can minimize excess bladder and rectal dose.

A beam-specific planning target volume (PTV) design for proton therapy to account for setup and range uncertainties.

PURPOSE: To report a method for explicitly designing a planning target volume (PTV) for treatment planning and evaluation in heterogeneous media for passively scattered proton therapy and scanning beam proton therapy using single-field optimization (SFO). METHODS AND MATERIALS: A beam-specific PTV (bsPTV) for proton beams was derived by ray-tracing and shifting ray lines to account for tissue misalignment in the presence of setup error or organ motion. Range uncertainties resulting from inaccuracies in computed tomography-based range estimation were calculated for proximal and distal surfaces of the target in the beam direction. The bsPTV was then constructed based on local heterogeneity. The bsPTV thus can be used directly as a planning target as if it were in photon therapy. To test the robustness of the bsPTV, we generated a single-field proton plan in a virtual phantom. Intentional setup and range errors were introduced. Dose coverage to the clinical target volume (CTV) under various simulation conditions was compared between plans designed based on the bsPTV and a conventional PTV. RESULTS: The simulated treatment using the bsPTV design performed significantly better than the plan using the conventional PTV in maintaining dose coverage to the CTV. With conventional PTV plans, the minimum coverage to the CTV dropped from 99% to 67% in the presence of setup error, internal motion, and range uncertainty. However, plans using the bsPTV showed minimal drop of target coverage from 99% to 94%. CONCLUSIONS: The conventional geometry-based PTV concept used in photon therapy does not work well for proton therapy. We investigated and validated a beam-specific PTV method for designing and evaluating proton plans.