High-Speed Atomic Force Microscopy Revealing Contamination in DNA Purification Systems.

Motivated by reports of low-level DNA contamination in popular commercial DNA purification kits, we employed a novel high-speed atomic force microscopy (HS-AFM) method to detect and characterize particulate and polymeric contaminants in four such systems: Qiagen MinElute PCR Purification, Zymo Research DNA Clean and Concentrator-5, Invitrogen ChargeSwitch-Pro PCR Purification, and Beckman Coulter AMPure XP. HS-AFM avoids amplification artifacts present in PCR or in the sequencing of amplified products, and it requires no chemical labels and easily achieves near-single-molecule sensitivity. Using this technique, we found trace levels of filamentous contamination, similar in appearance to dsDNA, in eluates from the Zymo, Qiagen, and ChargeSwitch kits. Conversely, we detected no contaminants in magnetic bead-based AMPure XP solutions. Eluates from the Zymo kits also tested positive for DNA in fluorescent intercalator dye and whole genome amplification (WGA) assays. Qiagen kits tested positive in the fluorescence assay but negative in the WGA assay. Both ChargeSwitch and AMPure XP tested negative in the fluorescence assay while the WGA results for these two kits were ambiguous. Taken together, our findings suggest AMPure XP would be the best choice for analyses requiring very high analytical stringency. While HS-AFM alone does not provide chemical specificity, it is a potentially valuable tool for characterizing and quantifying trace contaminants in molecular biology reagents and instruments in cases where conventional techniques fail.

Atomic force microscopic detection enabling multiplexed low-cycle-number quantitative polymerase chain reaction for biomarker assays.

Quantitative polymerase chain reaction is the current "golden standard" for quantification of nucleic acids; however, its utility is constrained by an inability to easily and reliably detect multiple targets in a single reaction. We have successfully overcome this problem with a novel combination of two widely used approaches: target-specific multiplex amplification with 15 cycles of polymerase chain reaction (PCR), followed by single-molecule detection of amplicons with atomic force microscopy (AFM). In test experiments comparing the relative expression of ten transcripts in two different human total RNA samples, we find good agreement between our single reaction, multiplexed PCR/AFM data, and data from 20 individual singleplex quantitative PCR reactions. This technique can be applied to virtually any analytical problem requiring sensitive measurement concentrations of multiple nucleic acid targets.

Novel polymer linkers for single molecule AFM force spectroscopy.

Flexible polymer linkers play an important role in various imaging and probing techniques that require surface immobilization, including atomic force microscopy (AFM). In AFM force spectroscopy, polymer linkers are necessary for the covalent attachment of molecules of interest to the AFM tip and the surface. The polymer linkers tether the molecules and provide their proper orientation in probing experiments. Additionally, the linkers separate specific interactions from nonspecific short-range adhesion and serve as a reference point for the quantitative analysis of single molecule probing events. In this report, we present our results on the synthesis and testing of a novel polymer linker and the identification of a number of potential applications for its use in AFM force spectroscopy experiments. The synthesis of the linker is based on the well-developed phosphoramidate (PA) chemistry that allows the routine synthesis of linkers with predetermined lengths and PA composition. These linkers are homogeneous in length and can be terminated with various functional groups. PA linkers with different functional groups were synthesized and tested in experimental systems utilizing different immobilization chemistries. We probed interactions between complementary DNA oligonucleotides; DNA and protein complexes formed by the site-specific binding protein SfiI; and interactions between amyloid peptide (Aß42). The results of the AFM force spectroscopy experiments validated the feasibility of the proposed approach for the linker design and synthesis. Furthermore, the properties of the tether (length, functional groups) can be adjusted to meet the specific requirements for different force spectroscopy experiments and system characteristics, suggesting that it could be used for a large number of various applications.

A trimeric DNA polymerase complex increases the native replication processivity.

DNA polymerases are essential enzymes in all domains of life for both DNA replication and repair. The primary DNA replication polymerase from Sulfolobus solfataricus (SsoDpo1) has been shown previously to provide the necessary polymerization speed and exonuclease activity to replicate the genome accurately. We find that this polymerase is able to physically associate with itself to form a trimer and that this complex is stabilized in the presence of DNA. Analytical gel filtration and electrophoretic mobility shift assays establish that initially a single DNA polymerase binds to DNA followed by the cooperative binding of two additional molecules of the polymerase at higher concentrations of the enzyme. Protein chemical crosslinking experiments show that these are specific polymerase-polymerase interactions and not just separate binding events along DNA. Isothermal titration calorimetry and fluorescence anisotropy experiments corroborate these findings and show a stoichiometry where three polymerases are bound to a single DNA substrate. The trimeric polymerase complex significantly increases both the DNA synthesis rate and the processivity of SsoDpo1. Taken together, these results suggest the presence of a trimeric DNA polymerase complex that is able to synthesize long DNA strands more efficiently than the monomeric form.

Gel-based oligonucleotide microarray approach to analyze protein-ssDNA binding specificity.

Gel-based oligonucleotide microarray approach was developed for quantitative profiling of binding affinity of a protein to single-stranded DNA (ssDNA). To demonstrate additional capabilities of this method, we analyzed the binding specificity of ribonuclease (RNase) binase from Bacillus intermedius (EC 3.1.27.3) to ssDNA using generic hexamer oligodeoxyribonucleotide microchip. Single-stranded octamer oligonucleotides were immobilized within 3D hemispherical gel pads. The octanucleotides in individual pads 5'-{N}N(1)N(2)N(3)N(4)N(5)N(6){N}-3' consisted of a fixed hexamer motif N(1)N(2)N(3)N(4)N(5)N(6) in the middle and variable parts {N} at the ends, where {N} represent A, C, G and T in equal proportions. The chip has 4096 pads with a complete set of hexamer sequences. The affinity was determined by measuring dissociation of the RNase-ssDNA complexes with the temperature increasing from 0 degrees C to 50 degrees C in quasi-equilibrium conditions. RNase binase showed the highest sequence-specificity of binding to motifs 5'-NNG(A/T/C)GNN-3' with the order of preference: GAG > GTG > GCG. High specificity towards G(A/T/C)G triplets was also confirmed by measuring fluorescent anisotropy of complexes of binase with selected oligodeoxyribonucleotides in solution. The affinity of RNase binase to other 3-nt sequences was also ranked. These results demonstrate the applicability of the method and provide the ground for further investigations of nonenzymatic functions of RNases.

Digital Polymerase Chain Reaction Paired with High-Speed Atomic Force Microscopy for Quantitation and Length Analysis of DNA Length Polymorphisms.

DNA length polymorphisms are found in many serious diseases, and assessment of their length and abundance is often critical for accurate diagnosis. However, measuring their length and frequency in a mostly wild-type background, as occurs in many situations, remains challenging due to their variable and repetitive nature. To overcome these hurdles, we combined two powerful techniques, digital polymerase chain reaction (dPCR) and high-speed atomic force microscopy (HSAFM), to create a simple, rapid, and flexible method for quantifying both the size and proportion of DNA length polymorphisms. In our approach, individual amplicons from each dPCR partition are imaged and sized directly. We focused on internal tandem duplications (ITDs) located within the FLT3 gene, which are associated with acute myeloid leukemia and often indicative of a poor prognosis. In an analysis of over 1.5 million HSAFM-imaged amplicons from cell line and clinical samples containing FLT3-ITDs, dPCR-HSAFM returned the expected variant length and variant allele frequency, down to 5% variant samples. As a high-throughput method with single-molecule resolution, dPCR-HSAFM thus represents an advance in HSAFM analysis and a powerful tool for the diagnosis of length polymorphisms.

An RNA microchip containing immobilized oligoribonucleotides with protective groups at 2'-O-positions.

To analyze RNA interactions with RNA binding molecules an RNA microchip containing immobilized oligoribonucleotides with protective groups [t-butyldimethylsilyl (tBDMS)] at 2'-O- positions was developed. The oligonucleotides were immobilized within three-dimensional (3-D) hydrogel pads fixed on a glass support. The protective groups preserved the oligoribonucleodes from degradation and were suitable to be removed directly on the microchip when needed, right before its use. These immobilized, deprotected oligoribonucleotides were tested for their interaction with afluorescently labeled oligodeoxyribonucleotide and analyzed for their availability to be cleaved enzymatically by the RNase binase. Stability of tBDMS-protected immobilized oligoribonucleotides after 2.5 years of storage as well as after direct RNase action was also tested. Melting curves of short RNA/DNA hybrids that had formed into gel pads of the microchip were found to exhibit clearly defined S-like shapes, with the melting temperatures in full accordance with those theoretically predicted for the same ionic strength. This approach, based on keeping the protective groups attached to oligoribonucleotides, can be applied for manufacturing any RNA microchips containing immobilized oligoribonucleotides, including microchips with two-dimensional (2-D) features. These RNA microchips can be used to measure thermodynamic parameters of RNA/RNA or RNA/DNA duplexes as well as to study ligand- or protein-RNA interactions.

DNA nanomapping using CRISPR-Cas9 as a programmable nanoparticle.

Progress in whole-genome sequencing using short-read (e.g., <150 bp), next-generation sequencing technologies has reinvigorated interest in high-resolution physical mapping to fill technical gaps that are not well addressed by sequencing. Here, we report two technical advances in DNA nanotechnology and single-molecule genomics: (1) we describe a labeling technique (CRISPR-Cas9 nanoparticles) for high-speed AFM-based physical mapping of DNA and (2) the first successful demonstration of using DVD optics to image DNA molecules with high-speed AFM. As a proof of principle, we used this new "nanomapping" method to detect and map precisely BCL2-IGH translocations present in lymph node biopsies of follicular lymphoma patents. This HS-AFM "nanomapping" technique can be complementary to both sequencing and other physical mapping approaches.

Characterization of a functional DnaG-type primase in archaea: implications for a dual-primase system.

We have biochemically characterized the bacterial-like DnaG primase contained within the hyperthermophilic crenarchaeon Sulfolobus solfataricus (Sso) and compared in vitro priming kinetics with those of the eukaryotic-type primase (PriSL) also found in Sso. SsoDnaG exhibited metal- and temperature-dependent profiles consistent with priming at high temperatures. The distribution of primer products was discrete but highly similar to the distribution of primer products produced by the homologous Escherichia coli DnaG. The predominate primer length was 13 bases, although less abundant products are present. SsoDnaG was found to bind DNA cooperatively as a dimer with a moderate dissociation constant. Mutation of the conserved glutamate in the active site severely inhibited priming activity, suggesting a functional homology with E. coli DnaG. SsoDnaG was also found to have a greater than fourfold faster rate of DNA priming over that of SsoPriSL under optimal in vitro conditions. The presence of both enzymatically functional primase families in archaea suggests that the DNA priming role may be shared on leading or lagging strands during DNA replication.

Effect of DNA supercoiling on the geometry of holliday junctions.

Unusual DNA conformations including cruciforms play an important role in gene regulation and various DNA transactions. Cruciforms are also the models for Holliday junctions, the transient DNA conformations critically involved in DNA homologous and site-specific recombination, repair, and replication. Although the conformations of immobile Holliday junctions in linear DNA molecules have been analyzed with the use of various techniques, the role of DNA supercoiling has not been studied systematically. We utilized atomic force microscopy (AFM) to visualize cruciform geometry in plasmid DNA with different superhelical densities at various ionic conditions. Both folded and unfolded conformations of the cruciform were identified, and the data showed that DNA supercoiling shifts the equilibrium between folded and unfolded conformations of the cruciform toward the folded one. In topoisomers with low superhelical density, the population of the folded conformation is 50-80%, depending upon the ionic strength of the buffer and a type of cation added, whereas in the sample with high superhelical density, this population is as high as 98-100%. The time-lapse studies in aqueous solutions allowed us to observe the conformational transition of the cruciform directly. The time-dependent dynamics of the cruciform correlates with the structural changes revealed by the ensemble-averaged analysis of dry samples. Altogether, the data obtained show directly that DNA supercoiling is the major factor determining the Holliday junction conformation.