RESUMO
BACKGROUND: Posttraumatic shoulder stiffness remains a problem after proximal humerus fracture (PHF) despite good healing rates. The aim of this pilot study was to determine whether the implant material and overlying soft tissue have an effect on shoulder range of motion (ROM) before and after implant removal (IR). METHODS: 16 patients (mean age 55.2 ± 15.3 (SD) years; 62.5% female) were included who underwent operative treatment with locking plates of either carbon fiber reinforced Polyetheretherketone (PEEK) (PEEKPower® humeral fracture plate, Arthrex, Naples, Florida, USA, n = 8) or titanium alloy (Ti) (Philos®, DePuy Synthes, Johnson & Johnson Medical, Raynham, Massachusetts, USA, n = 8) for PHF. All patients presented with a limited ROM and persistent pain in everyday life after the fracture had healed, whereupon IR was indicated. ROM before and after IR were compared as well as the Constant Score (CS) and the CS compared to the contralateral shoulder (%CS) 1 year after IR. RESULTS: In group PEEK, elevation was 116.3° ± 19.2° pre- and 129.4° ± 23.7° post-IR (p = 0.027). External rotation was 35.0° ± 7.6° pre- and 50.6° ± 21.8° post-IR (p = 0.041). External rotation with the humerus abducted 90° was 38.8° ± 18.1° pre- and 52.5° ± 25.5° post-IR (p = 0.024). In group Ti, elevation was 110.0° ± 34.6° pre- and 133.8° ± 31.1° post-IR (p = 0.011). External rotation with the humerus at rest was 33.8° ± 23.1° pre- and 48.8° ± 18.7° post-IR (p = 0.048). External rotation with the humerus abducted 90° was 40.0° ± 31.6° pre- and 52.5° ± 22.5° post-IR (p = 0.011). Comparison of the two implant materials showed no significant difference. The overall CS was 90.3 ± 8.8, the %CS was 91.8% ± 14.7%. CONCLUSION: There was no significant difference in ROM, CS and %CS with respect to plate materials, although lower cell adhesion is reported for the hydrophobic PEEK. However, all patients showed improved functional outcomes after IR in this pilot study. In patients with shoulder stiffness following locked plating for PHF, implants should be removed and open arthrolysis should be performed, independently from the hardware material. LEVEL OF EVIDENCE: II.
Assuntos
Fraturas do Ombro , Titânio , Adulto , Idoso , Benzofenonas , Placas Ósseas , Feminino , Fixação Interna de Fraturas , Humanos , Úmero/diagnóstico por imagem , Úmero/cirurgia , Masculino , Pessoa de Meia-Idade , Projetos Piloto , Polímeros , Estudos Retrospectivos , Ombro , Fraturas do Ombro/diagnóstico por imagem , Fraturas do Ombro/cirurgia , Resultado do TratamentoRESUMO
Tendon pathologies are a frequent cause of shoulder pain and can lead to significant decline in the quality of life. Conservative treatment is suitable for most tendon pathologies. In addition to classical conservative treatment options, such as physiotherapy, oral analgesia and infiltrations, there are a number of additive treatment options to promote structural tendon healing and clinical outcome. Furthermore, there are approaches to improve the results of the surgical treatment of tendon injuries by biological augmentation. The objective of this article is to give an overview of biological and regenerative therapeutic options in the treatment of tendon injuries of the shoulder. Therefore, the anatomical and molecular biological principles of the tendon structure and their importance for tendon healing are explained in order to highlight the various therapeutic options for daily practice. Biological augmentation procedures and regenerative medicine represent a promising therapeutic option for tendon injuries of the shoulder, however, the benefits are so far supported by little or no evidence at all.
Assuntos
Plasma Rico em Plaquetas , Lesões do Manguito Rotador , Humanos , Qualidade de Vida , Medicina Regenerativa , Manguito Rotador , Lesões do Manguito Rotador/cirurgia , Ombro , Tendões , Resultado do TratamentoRESUMO
In May 2016, two cases of tick-borne encephalitis (TBE) were confirmed by serology (positive IgM and IgG antibodies against TBE virus (TBEV) in serum), with a possible link to raw milk and cheese from a goat farm in a region in Baden-Württemberg, Germany not previously known as TBE-endemic. The outbreak investigation identified 32 consumers of goat dairy products (29 consumers, one farm employee, two owners) of whom none had IgM antibodies against TBEV 3-8 weeks after consumption. Of the 27 notified TBE cases in the State, none reported consumption of raw goat milk or cheese from the suspected farm. Five of 22 cheese samples from 18 different batches were RT-qPCR-positive for TBEV -genome, and two of the five samples were confirmed by virus isolation, indicating viability of TBEV in the cheese. Nine of the 45 goats had neutralising TBEV antibodies, two of them with a high titre indicating recent infection. One of 412 Ixodes ricinus was RT-qPCR-positive, and sequencing of the E gene from nucleic acid extracted from the tick confirmed TBEV. Phylogenetic analyses of tick and cheese isolates showed 100% amino acid homology in the E gene and a close relation to TBEV strains from Switzerland and Austria.
Assuntos
Queijo/virologia , Vírus da Encefalite Transmitidos por Carrapatos/isolamento & purificação , Encefalite Transmitida por Carrapatos/diagnóstico , Ixodes/virologia , Leite/virologia , Animais , Anticorpos Antivirais/sangue , Vírus da Encefalite Transmitidos por Carrapatos/genética , Encefalite Transmitida por Carrapatos/virologia , Cabras , Humanos , RNA Viral/sangue , RNA Viral/isolamento & purificação , Reação em Cadeia da Polimerase em Tempo Real , Análise de Sequência de DNARESUMO
BACKGROUND: The influence of stem cells and lentiviral expression of basic fibroblastic growth factor (bFGF) on tendon healing and remodelling was investigated in an in-vivo long-term (12 weeks) rat Achilles tendon defect model. METHODS: In sixty male Lewis rats, complete tendon defects (2.4 mm) were created and either left untreated (PBS) or treated by injection of stem cells lentivirally expressing the enhanced green fluorescence marker gene eGFP (MSC-LV-eGFP) or basic fibroblast growth factor bFGF (MSC-LV-bFGF). Tendons were harvested after 12 weeks and underwent biomechanical and (immuno)-histological analysis. RESULTS: After 12 weeks the mean ultimate load to failure ratio (treated side to contralateral side) in biomechanical testing reached 97 % in the bFGF-group, 103 % in the eGFP-group and 112 % in the PBS-group. Also in the stiffness testing both MSC groups did not reach the results of the PBS group. Histologically, the MSC groups did not show better results than the control group. There were clusters of ossifications found in all groups. In immunohistology, only the staining collagen-type-I was strongly increased in both MSC groups in comparison to PBS control group. However, there were no significant differences in the (immuno)-histological results between both stem cell groups. CONCLUSION: The biomechanical and (immuno)-histological results did not show positive effects of the MSC groups on tendon remodelling in a long-term follow-up. Interestingly, in later stages stem cells had hardly any effects on biomechanical results. This study inspires a critical and reflected use of stem cells in tendon healing.
Assuntos
Tendão do Calcâneo/cirurgia , Fator 2 de Crescimento de Fibroblastos/genética , Terapia Genética/métodos , Vetores Genéticos , Lentivirus/genética , Transplante de Células-Tronco Mesenquimais , Células-Tronco Mesenquimais/metabolismo , Traumatismos dos Tendões/terapia , Cicatrização , Tendão do Calcâneo/metabolismo , Tendão do Calcâneo/patologia , Tendão do Calcâneo/fisiopatologia , Animais , Fenômenos Biomecânicos , Modelos Animais de Doenças , Fator 2 de Crescimento de Fibroblastos/biossíntese , Técnicas de Transferência de Genes , Masculino , Ratos Endogâmicos Lew , Recuperação de Função Fisiológica , Traumatismos dos Tendões/genética , Traumatismos dos Tendões/metabolismo , Traumatismos dos Tendões/patologia , Fatores de TempoRESUMO
Apophyses are growth zones attached to the shaft (corpus) of larger bones. They vary in size and develop their own ossification centres or form as part of an usually fibrocartilaginous tendon or ligament insertion. The structure of the cartilaginous apophyseal plate is very similar to that of an epiphyseal growth plate and like these they are adapted to withstand perpendicular compressive forces without becoming harmed. This is best highlighted by the fact that their mineralized borders always orient themselves perpendicular to the overall resulting force vector. The edges of the apophyseal plates are characteristically bent which allows them to resist moderate shear forces. Like the epiphyseal plates the apophyseal plates exhibit a zonal organization which is not very well adapted to permanently withstand shear forces, especially if they occur under dynamic conditions. In these situations the tendinous insertions with their collagen fibre anchoring system have to provide compensation when balancing the load transmitted across the system.
Assuntos
Osso e Ossos/anatomia & histologia , Lâmina de Crescimento/anatomia & histologia , Modelos Anatômicos , Animais , HumanosRESUMO
BACKGROUND: The acromioclavicular (AC) joint connects the acromion with the lateral end of the clavicle and constitutes an important load-transmitting element between the upper extremity and the skeleton of the trunk. AIM: This review discusses functional aspects that relate the AC and the coracoclavicular (CC) ligaments to AC joint instability and lateral clavicle fracture. RESULTS: In terms of stability the AC and CC ligaments play a pivotal role for this region. Under normal conditions the restraint system is balanced and becomes unbalanced in cases of injury such as AC joint instability or lateral clavicular fractures. Skeletal injuries frequently affect the ligaments with their usually sharp-angled insertion sites, which alters the function of the restraint system. As a consequence these injuries lead to multidirectional dislocating forces acting on the scapula in relationship to the lateral end of the clavicle. Previously, special attention was given to the vertical dislocation of the lateral clavicle, whereas less attention was paid to other factors which could lead to dislocation in other directions. Therefore, in this review emphasis is placed on the anatomical principles of multidirectional dislocation of the AC joint the fractured lateral clavicle. CONCLUSION: Current clinical classification schemes fail to sufficiently include these multidirectional dislocating forces; however, they have to be considered when choosing the appropriate treatment modality. Thus, understanding the anatomical and functional context of the AC/CC region is essential for a sound management of AC joint injuries and fractures of the distal clavicle.
Assuntos
Articulação Acromioclavicular/lesões , Articulação Acromioclavicular/patologia , Fraturas Ósseas/patologia , Luxações Articulares/patologia , Instabilidade Articular/fisiopatologia , Articulação Acromioclavicular/fisiopatologia , Fraturas Ósseas/fisiopatologia , Humanos , Luxações Articulares/fisiopatologia , Modelos Anatômicos , Modelos BiológicosRESUMO
We hypothesized that botulinumneurotoxin A (BoNtA) positively influences tissue characteristics at the re-insertion site when used as an adjuvant prior to rotator cuff repair. One hundred and sixty Sprague-Dawley rats were randomly assigned to either a BoNtA or saline-injected control group. BoNtA or saline solution was injected into the supraspinatus muscle one week prior to repair of an artificially created supraspinatus tendon defect. Post-operatively, one subgroup was immobilized using a cast on the operated shoulder while the other had immediate mobilization. Histologically, the fibrocartilage transition zone was more prominent and better organized in the BoNtA groups when compared to the saline control group. In the immediately mobilized BoNtA groups significantly more collagen 2 at the insertion was detected than in the control groups (p<0.05). Fiber orientation of all BoNtA groups was better organized and more perpendicular to the epiphysis compared with control groups. Tendon stiffness differed significantly (p<0.05) between casted BoNtA and casted saline groups. Tendon viscoelasticity was significantly higher (p<0.05) in the immobilized saline groups no matter if repaired with increased or normal repair load. The results of this study suggest that reduction of load at the healing tendon-to-bone interface leads to improved repair tissue properties.
Assuntos
Toxinas Botulínicas Tipo A/farmacologia , Fármacos Neuromusculares/farmacologia , Paresia/induzido quimicamente , Regeneração/efeitos dos fármacos , Manguito Rotador , Animais , Epífises/metabolismo , Epífises/patologia , Ratos , Ratos Sprague-Dawley , Manguito Rotador/metabolismo , Manguito Rotador/patologia , Lesões do Manguito Rotador , Lesões do Ombro , Articulação do Ombro/metabolismo , Articulação do Ombro/patologiaRESUMO
OBJECTIVE: The objective of this study was to elucidate whether complement activation occurs during the storage of RBCs in newly formulated PAGGS-M storage medium. BACKGROUND: The reason for red blood cell (RBC) storage lesions is not yet fully understood. The contribution of complement to RBC storage lesion has not been extensively characterised. STUDY DESIGN AND METHODS: We investigated the surface expression of CD35, CD55, CD59 and CD47, as well as deposition of C3d, using flow cytometry over a storage period of up to 42 days on a weekly basis. C3d and the immunoglobulins IgG, IgM and IgA were additionally investigated via the direct antiglobulin test (DAT). The effect of contact with homologous serum for 30 min at 37 °C was also performed for C3d and CD35 and is subsequently termed as a 'transfusion simulation (TS)'. RESULTS: A weak but significant increase of C3d was observed prior to TS (anova P = 0.0103), whereas a stronger increase from 74.0 ± 12.4 to 101.2 ± 9.7 was observed post-TS (anova; P < 0.0001). These findings were confirmed by the DAT. CD35, CD55 and CD47 demonstrated a decrease in their expression over storage time (anova; P < 0.0001 each). The majority of changes occurred following 14 days. There was neither a decrease of CD59 observed nor an increase of IgG, IgM and IgA. CONCLUSION: RBCs are becoming increasingly susceptible to spontaneous complement deposition following TS, which might be associated with the decrease of C35 and CD55 by proteolytic cleavage and vesiculation during storage. As the impact of storage lesions is rather controversial, institutions involved in blood collection and administration of blood products should focus on carrying out research on the prevention of storage lesions.
Assuntos
Antígenos CD/metabolismo , Preservação de Sangue , Complemento C3d/metabolismo , Eritrócitos , Proteólise , Adulto , Eritrócitos/citologia , Eritrócitos/metabolismo , Feminino , Humanos , Masculino , Fatores de TempoRESUMO
INTRODUCTION: The thoracolumbar junction (TJ) is traditionally exposed by lateral or posterior approaches. This usually requires splitting of the diaphragm, or extensile removal of the posterior elements. A circumferential exposure (i.e. simultaneous anterior and bilateral exposure) of the vertebral body is not possible. Direct anterior access would allow circumferential exposure of the vertebral body, with adjacent disc levels, and would avoid splitting the diaphragm or extensive removal of the posterior bony structures. MATERIALS AND METHODS: Twelve Thiel cadavers (8 f/4 m) were dissected to access T12 or L1 via a midline laparotomy. Supra- and infragastric laparatomy techniques were investigated. Six cadavers were used to reach T12 through the lesser omentum, six to reach L1 through the greater omentum. RESULTS: T12 after bluntly dissecting the lesser omentum, the lesser gastric curvature and the caudate lobe of the liver were utilised as landmarks. A small retroperitoneal incision was performed to mobilise the aorta allowing exposure of the T12 vertebra and its adjacent discs. Discectomy, corpectomy and insertion of an anterior column support were possible. The L1 level can be reached through the greater omentum by mobilising the pancreas as a single retroperitoneal structure, leaving the aorta and celiac trunk as landmarks. Retraction of the great vessels is necessary to expose L1 with its adjacent discs. Implantation of an anterior column support was possible utilising this approach. CONCLUSION: Direct anterior access to the TJ is feasible in a reproducible manner. This approach would avoid splitting the diaphragm, or dissection of the erector spinae muscles, and is likely to be less invasive than standard lateral or posterior approaches. This technique may offer a significant time reduction to surgery, especially in exposing the spine. Anterior column support can easily be performed, offering a better avoidance of kyphotic deformities.
Assuntos
Vértebras Lombares/cirurgia , Procedimentos Ortopédicos/métodos , Vértebras Torácicas/cirurgia , Idoso , Idoso de 80 Anos ou mais , Cadáver , Estudos de Viabilidade , Feminino , Humanos , Vértebras Lombares/anatomia & histologia , Masculino , Omento/cirurgia , Vértebras Torácicas/anatomia & histologiaRESUMO
Standard procedure for monosegmental anterior spondylodesis often combines anterior stabilization with autologous iliac crest graft. Recent publications defined a minimum size of the graft as a technical specification for this procedure. The cross sectional area of the graft to be transplanted should be at least 23.9% of the cross sectional area of the vertebral bodies to be fused. We investigated whether the required minimum size of autologous graft, as identified both experimentally and clinically, is compatible with the anatomical conditions in central european patients. Computed tomography scans (n = 348) of polytraumatized patients were obtained in the course of initial diagnosis. The scans were evaluated for vertebral body size and the possible size of autologous bone graft in the region of the anterior superior iliac crest. The evaluation of 348 CT scans demonstrated that 95% of the quantified iliac crest grafts would achieve the size recommended for anterior spinal fusion between T10 and T12. In 90% of all cases the planned iliac crest graft exceeded the size limit of 23,9% between concerning the endplates T10 and L2. In 85% the planned iliac crest graft exceeded the size limit of 23,9% between T10 and L3. The recommendation to take this value into account for monosegmental anterior spondylodesis should gain in importance in clinical practice.
Assuntos
Autoenxertos/diagnóstico por imagem , Transplante Ósseo/métodos , Ílio/transplante , Vértebras Lombares/diagnóstico por imagem , Fusão Vertebral/métodos , Vértebras Torácicas/diagnóstico por imagem , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Autoenxertos/anatomia & histologia , Feminino , Humanos , Vértebras Lombares/anatomia & histologia , Vértebras Lombares/cirurgia , Masculino , Pessoa de Meia-Idade , Tomografia Computadorizada Multidetectores , Tamanho do Órgão , Estudos Retrospectivos , Vértebras Torácicas/anatomia & histologia , Vértebras Torácicas/cirurgia , Adulto JovemRESUMO
Titanium as the leading implant material in locked plating is challenged by polymers such as carbon fiber-reinforced polyetheretherketone (CFR-PEEK), which became the focus of interest of researchers and manufacturers in recent years. However, data on human tissue response to these new implant materials are rare. Osteosynthesis plates and periimplant soft tissue samples of 16 healed proximal humerus fractures were examined (n = 8 CFR-PEEK, n = 8 titanium). Soft tissue was analyzed by immunohistochemistry and µCT. The entrapped foreign bodies were further examined for their material composition by FTIR. To gain insight into their origin and formation mechanism, explanted and new plates were evaluated by SEM, EDX, profilometry and HR-CT. In the periimplant soft tissue of the CFR-PEEK plates, an inflammatory tissue reaction was detected. Tissues contained foreign bodies, which could be identified as tantalum wires, carbon fiber fragments and PEEK particles. Titanium particles were also found in the periimplant soft tissue of the titanium plates but showed a less intense surrounding tissue inflammation in immunohistochemistry. The surface of explanted CFR-PEEK plates was rougher and showed exposed and broken carbon fibers as well as protruding and deformed tantalum wires, especially in used screw holes, whereas scratches were identified on the titanium plate surfaces. Particles were present in the periimplant soft tissue neighboring both implant materials and could be clearly assigned to the plate material. Particles from both plate materials caused detectable tissue inflammation, with more inflammatory cells found in soft tissue over CFR-PEEK plates than over titanium plates. STATEMENT OF SIGNIFICANCE: Osteosynthesis plates are ubiquitously used in various medical specialties for the reconstruction of bone fractures and defects and are therefore indispensable for trauma surgeons, ENT specialists and many others. The leading implant material are metals such as titanium, but recently implants made of polymers such as carbon fiber-reinforced polyetheretherketone (CFR-PEEK) have become increasingly popular. However, little is known about human tissue reaction and particle generation related to these new implant types. To clarify this question, 16 osteosynthesis plates (n = 8 titanium and n = 8 CFR-PEEK) and the overlying soft tissue were analyzed regarding particle occurrence and tissue inflammation. Tissue inflammation is clinically relevant for the development of scar tissue, which is discussed to cause movement restrictions and thus contributes significantly to patient outcome.
Assuntos
Benzofenonas , Placas Ósseas , Fibra de Carbono , Carbono , Inflamação , Cetonas , Polietilenoglicóis , Polímeros , Titânio , Humanos , Cetonas/química , Titânio/química , Titânio/efeitos adversos , Polietilenoglicóis/química , Polímeros/química , Fibra de Carbono/química , Carbono/química , Masculino , Inflamação/patologia , Feminino , Pessoa de Meia-Idade , Idoso , AdultoRESUMO
Two different imaging techniques used to determine bone tissue response to dental implants were compared. Dental implants were implanted into the maxillae of 18 pigs, which were sacrificed after 4, 8 and 12 weeks. Implants with surrounding bone tissue were retrieved for methyl methacrylate histology and contact radiography. On identical sections peri-implant bone density and bone implant contact (BIC) ratio were assessed with two different imaging methods. Evaluation of Giemsa eosin stained and contact radiographed sections showed direct osseous integration for all implants and both methods showed a strong correlation with correlation coefficient r = 0.930 (P < 0.0001) for peri-implant bone density and r = 0.817 (P < 0.0001) for bone implant contact ratio. While the two imaging methods showed moderate differences for peri-implant bone density there were significant differences between the BIC values determined. In general, contact radiography tends to underestimate BIC for approximately 4.5 % (P = 0.00003).
Assuntos
Implantes Dentários , Osseointegração , Animais , Feminino , Suínos , Porco MiniaturaRESUMO
OBJECTIVES: To compare the bone tissue response to surface-modified zirconia (ZrO2 ) and titanium implants. METHODS: Cylindrical low-pressure injection moulded zirconia (ZrO2 ) implants were produced with an acid-etched surface. Titanium implants with identical shape, sandblasted and acid-etched surface (SLA) served as controls. Eighteen adult miniature pigs received both implant types in the maxilla 6 months after extraction of the canines and incisors. The animals were euthanized after 4, 8 and 12 weeks and 16 zirconia and 18 titanium implants with the surrounding tissue were retrieved, embedded in methylmethacrylate and stained with Giemsa-Eosin. The stained sections were digitized and histomorphometrically analysed with regard to peri-implant bone density (bone volume/total volume) and bone-implant contact (BIC) ratio. Statistical analysis was performed using Mann-Whitney' U-test. RESULTS: Histomorphometrical analysis showed direct osseous integration for both materials. ZrO2 implants revealed mean peri-implant bone density values of 60.4% (SD ± 9.9) at 4 weeks, 65.4% (SD ± 13.8) at 8 weeks, and 63.3% (SD ± 21.5) at 12 weeks after implantation, whereas Ti-SLA implants demonstrated mean values of 61.1% (SD ± 6.2), 63.6% (SD ± 6.8) and 68.2% (SD ± 5.8) at corresponding time intervals. Concerning the BIC ratio, the mean values for ZrO(2) ranged between 67.1% (SD ± 21.1) and 70% (SD ± 14.5) and for Ti-SLA between 64.7% (SD ± 9.4) and 83.7% (SD ± 10.3). For the two parameters investigated, no significant differences between both types of implants could be detected at any time point. CONCLUSION: The results indicate that there was no difference in osseointegration between ZrO2 implants and Ti-SLA controls regarding peri-implant bone density and BIC ratio.
Assuntos
Implantação Dentária Endóssea/métodos , Implantes Dentários , Maxila/cirurgia , Titânio , Zircônio , Condicionamento Ácido do Dente , Animais , Densidade Óssea , Planejamento de Prótese Dentária , Feminino , Osseointegração , Coloração e Rotulagem , Estatísticas não Paramétricas , Propriedades de Superfície , Suínos , Porco MiniaturaRESUMO
We analyzed the immunohistochemical labeling patterns of the extracellular matrix of the coracoclavicular ligaments (CCL) in order to relate the molecular composition of the attachment sites to their mechanical environment. Ligaments were exposed from 12 fresh-frozen human cadaveric samples (four males, mean age: 48.6 ± 12.1 years). Cryosection of methanol-fixed and decalcified tissue was cut and sections were labeled with a panel of monoclonal antibodies directed against collagens, proteoglycans and proteins of vascular components. Attachment sites of both ligaments showed characteristic fibrocartilaginous labeling of collagen type II, aggrecan and link protein in all samples. Labeling for type II collagen was most conspicuous at the insertion of the coracoid process. Morphometry of adjacent samples revealed a fibrocartilage zone of 10-15% in relationship with the ligament proper, where labeling for type II collagen, aggrecan and link protein was negative. The presence of fibrocartilage at both entheses of the trapezoid and conoid ligament suggests that the CCL complex is subject to shear/compression forces. A variable fibrocartilage differentiation at the entheses of both ligaments may be related to the marked change in loading and insertion angle that the ligaments undergo during shoulder movement.
Assuntos
Matriz Extracelular/química , Ligamentos/anatomia & histologia , Ligamentos/química , Adulto , Agrecanas/análise , Fenômenos Biomecânicos/fisiologia , Cadáver , Clavícula , Colágeno Tipo II/análise , Proteínas da Matriz Extracelular/análise , Feminino , Fibrocartilagem/anatomia & histologia , Fibrocartilagem/química , Humanos , Imuno-Histoquímica , Ligamentos/irrigação sanguínea , Masculino , Pessoa de Meia-Idade , Proteoglicanas/análise , Escápula , Ombro/irrigação sanguínea , Ombro/fisiologiaRESUMO
The patellofemoral joint constitutes a complex anatomical and functional entity. The tensile force of the quadriceps femoris muscle is transmitted through the patella and patellar ligament onto the tibial tuberosity. This particular three-dimensional arrangement increases the torsional moment acting on the knee joint. Dynamic alignment of the patella is determined by trochlear geometry and is supported by active muscular and passive connective tissue stabilizers. In addition to the retinaculum of the patella, the medial patellofemoral ligament is attracting increasing clinical attention. Multidirectional motion of the patella is closely connected to retropatellar pressure distribution which can be modulated by moving the patellar ligament insertion. Implantation of a knee endoprosthesis changes the joint surface geometry and consequently patella kinematics and retropatellar pressure distribution. Finite element analysis provides the possibility to assess retropatellar pressure distribution before and after implantation of prostheses.
Assuntos
Artroplastia do Joelho , Articulação Patelofemoral/fisiopatologia , Complicações Pós-Operatórias/fisiopatologia , Fenômenos Biomecânicos/fisiologia , Análise de Elementos Finitos , Humanos , Patela/fisiopatologia , Luxação Patelar/fisiopatologia , Ligamento Patelar/fisiopatologia , Pressão , Desenho de Prótese , Músculo Quadríceps/fisiopatologia , Amplitude de Movimento Articular/fisiologia , Resistência à Tração/fisiologia , Torção Mecânica , Suporte de Carga/fisiologiaRESUMO
BACKGROUND: In cases of distal radius fractures information about the regional distribution of cancellous bone is essential for adequate fixation of osteosynthesis material. MATERIALS AND METHODS: Using quantitative computed tomography (qCT) measurements 12 distal radii were divided into 2 groups (good and bad bone quality). High-resolution CT scans were obtained at 13 locations (1-40 mm distant from radial styloid processes). The resulting cross-sections were divided into 4 quadrants and the cancellous bone density was assessed in each of them. RESULTS: In both groups regional cancellous bone density was highest immediately beneath the joint surface and decreased towards the metaphyseal region. Comparing the radial with the ulnar quadrants significant differences were found between distances of 4 mm and 12 mm from the joint surface in both groups. The comparison of the palmar and the dorsal quadrants resulted in an almost identical cancellous bone distribution. CONCLUSION: In osteoporotic distal radii cancellous bone density decrease occurs homogeneously in all regions and is least pronounced beneath the joint surface. Comparing the regional cancellous bone density (radial versus ulnar and palmar versus dorsal) significant differences were mainly found near the joint surface in both groups.
Assuntos
Osteoporose/diagnóstico por imagem , Rádio (Anatomia)/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Idoso de 80 Anos ou mais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
OBJECTIVE: Regardless of recent progress in the elucidation of intervertebral disc (IVD) degeneration, the basic molecular characteristics that define a healthy human IVD are largely unknown. Although work in different animal species revealed distinct molecules that might be used as characteristic markers for IVD or specifically nucleus pulposus (NP) cells, the validity of these markers for characterization of human IVD cells remains unknown. DESIGN: Eleven potential marker molecules were characterized with respect to their occurrence in human IVD cells. Gene expression levels of NP were compared with annulus fibrosus (AF) and articular cartilage (AC) cells, and potential correlations with aging were assessed. RESULTS: Higher mRNA levels of cytokeratin-19 (KRT19) and of neural cell adhesion molecule-1 were noted in NP compared to AF and AC cells. Compared to NP cytokeratin-18 expression was lower in AC, and alpha-2-macroglobulin and desmocollin-2 lower in AF. Cartilage oligomeric matrix protein (COMP) and glypican-3 expression was higher in AF, while COMP, matrix gla protein (MGP) and pleiotrophin expression was higher in AC cells. Furthermore, an age-related decrease in KRT19 and increase in MGP expression were observed in NP cells. The age-dependent expression pattern of KRT19 was confirmed by immunohistochemistry, showing the most prominent KRT19 immunoreaction in the notochordal-like cells in juvenile NP, whereas MGP immunoreactivity was not restricted to NP cells and was found in all age groups. CONCLUSIONS: The gene expression of KRT19 has the potential to characterize human NP cells, whereas MGP cannot serve as a characteristic marker. KRT19 protein expression was only detected in NP cells of donors younger than 54 years.
Assuntos
Envelhecimento/genética , Cartilagem Articular/metabolismo , Condrócitos/metabolismo , Proteínas da Matriz Extracelular/metabolismo , Fibrocartilagem/metabolismo , Disco Intervertebral/metabolismo , Adulto , Fatores Etários , Idoso , Idoso de 80 Anos ou mais , Biomarcadores/metabolismo , Proteínas da Matriz Extracelular/genética , Feminino , Expressão Gênica , Humanos , Masculino , Pessoa de Meia-Idade , Fenótipo , Reação em Cadeia da Polimerase/métodos , Estatística como Assunto , Adulto JovemRESUMO
OBJECTIVES: The purpose of the present study was to histologically compare the bone tissue responses to surface-modified zirconia and titanium implants. METHODS: Threaded zirconia implants were produced using a new low-pressure injection moulding technique and thereafter surface treated by acid etching. Titanium implants with the exact shape and surface treated by sandblasting and acid etching (SLA) served as controls. Fifteen adult pigs received both implant types in the maxilla 6 months after extraction of the second and third incisors. The animals were sacrificed after 4, 8 and 12 weeks and 30 implants with surrounding bone were retrieved. RESULTS: Histological evaluation showed osseous integration for both materials. Zirconia implants revealed mean peri-implant bone density values of 42.3% (SD +/- 14.5) at 4 weeks, 52.6% (SD +/- 5.7) at 8 weeks and 54.6% (SD +/- 11.5) at 12 weeks after implantation, whereas Ti-SLA implants demonstrated mean values of 29% (SD +/- 10), 44.1% (SD +/- 18) and 51.6% (SD +/- 8.6) at corresponding time intervals. With respect to the bone-implant contact ratio, the mean values for zirconia ranged between 27.1% (SD +/- 3.5) and 51.1% (SD +/- 12.4) and for Ti-SLA, it ranged between 23.5% (SD +/- 7.5) and 58.5% (SD +/- 11.4). For the parameters investigated, no statistically significant differences between both types of implants could be detected at any time point. CONCLUSIONS: No statistical difference between implants could be demonstrated with any of the methods used. The limited number of animals per group, however, does not allow to conclude that there is no difference in osseointegration between the two types of implants, although the data tend to suggest such a trend.
Assuntos
Implantes Dentários para Um Único Dente , Planejamento de Prótese Dentária , Maxila/fisiologia , Osseointegração/fisiologia , Titânio , Zircônio , Processo Alveolar/anatomia & histologia , Processo Alveolar/fisiologia , Processo Alveolar/cirurgia , Animais , Densidade Óssea/fisiologia , Regeneração Óssea/fisiologia , Implantação Dentária Endóssea/métodos , Seguimentos , Maxila/anatomia & histologia , Maxila/cirurgia , Propriedades de Superfície , SuínosRESUMO
We present a novel method to support precise insertion of engineered osteochondral grafts by pulling from the bone layer, thereby minimizing iatrogenic damage associated with direct manipulation of the cartilage layer. Grafts were generated by culturing human expanded chondrocytes on Hyaff-11 meshes, sutured to Tutobone spongiosa cylinders. Through the bone layer, shaped to imitate the surface-contours of the talar dome, two sutures were applied: the first for anterograde implantation, to pull the graft into the defect, and the second for retrograde correction, in case of a too deep insertion. All grafts could be correctly positioned into osteochondral lesions created in cadaveric ankle joints with good fit to the surrounding cartilage. Implants withstood short-term dynamic stability tests applied to the ankle joint, without delamination or macroscopic damage. The developed technique, by allowing precise and stable positioning of osteochondral grafts without iatrogenic cartilage damage, is essential for the implantation of engineered tissues, where the cartilage layer is not fully mechanically developed, and could be considered also for conventional autologous osteochondral transplantation.