RESUMO
In this paper, the structural stability, electronic, optical, mechanical, and thermal properties of diphenylacetylene-based graphyne (DPAG) nanosheet are investigated using first-principle calculations based on density functional theory (DFT). The absolute value of the calculated cohesive energy reveals that DPAG nanosheet is a structurally stable two-dimensional material. Also, in the results of phononic dispersion curves, the absence of imaginary frequencies confirms the dynamic stability of this novel material. In addition, the theoretical electronic band structure and density of states reveal the semiconducting nature of DPAG nanosheet. The optical analysis shows that the first absorption peaks of the imaginary and real parts of dielectric constants along the in-plane and out-of-plane polarizations of DPAG monolayer occur in the visible range of the electromagnetic spectrum. On the other hand, the DPAG nanosheet exhibits orthotropic elastic behavior with four independent constants comparable with the data of similar materials available in the literature. Moreover, DFT calculations of the lattice thermal conductivity of DPAG reveals an anomalously very low thermal conductivity of this nanosheet showing its perfect thermal non-conductivity. Our results provide deep insights into the potential applications of DPAG nanosheet for the design of new optoelectronic/nanoelectronic devices.
RESUMO
In this paper we report on the use of an Ullmann-like aryl halide homocoupling reaction to obtain long Graphyne Molecular Wires (GY MWs) organized in dense, ordered arrays. Instead of using highly reactive terminal alkynes, we resort to a precursor wherein the acetylenic functional group is internal, namely protected by two phenyl rings, each bearing a Br atom in the para position to allow for linear homocoupling. In addition, two further factors concur with the production of dense and highly ordered arrays of very long GY MWs, namely the geometric compatibility between the substrate and both the organometallic intermediates and the final polymeric products of the synthesis, coupled with the presence of surface-adsorbed bromine atoms separating the MWs, which minimize inter-wire cross-linking secondary reactions.
RESUMO
Self-consistent charge density functional tight-binding (DFTB) calculations have been performed to investigate the electrical properties and transport behavior of asymmetric graphene devices (AGDs). Three different nanodevices constructed of different necks of 8 nm, 6 nm and 4 nm, named Graphene-N8, Graphene-N6 and Graphene-N4, respectively, have been proposed. All devices have been tested under two conditions of zero gate voltage and an applied gate voltage of +20 V using a dielectric medium of 3.9 epsilon interposed between the graphene and the metallic gate. As expected, the results of AGD diodes exhibited strong asymmetric I(V) characteristic curves in good agreement with the available experimental data. Our predictions implied that Graphene-N4 would achieve great asymmetry (A) of 1.40 at |VDS| = 0.2 V with maximum transmittance (T) of 6.72 in the energy range 1.30 eV. More importantly, while the A of Graphene-N4 was slightly changed by applying the gate voltage, Graphene-N6/Graphene-N8 showed a significant effect with their A increased from 1.20/1.03 under no gate voltage (NGV) to 1.30/1.16 under gate voltage (WGV) conditions. Our results open up unprecedented numerical prospects for designing tailored geometric diodes.
RESUMO
Zinc oxide and polylactic-co-glycolic acid (ZnO-PLGA) nanocomposites are known to exhibit different biomedical applications and antibacterial activity, which could be beneficial for adding to wound dressings after different surgeries. However, possible cytotoxic effects along with various unexpected activities could reduce the use of these prominent systems. This is correlated to the property of ZnO, which exhibits different polymeric forms, in particular, wurtzite, zinc-blende, and rocksalt. In this study, we propose a computational approach based on the density functional theory to investigate the properties of ZnO-PLGA systems in detail. First, three different stable polymorphs of ZnO were considered. Subsequently, the abilities of each system to absorb the PLGA copolymer were thoroughly investigated, taking into account the modulation of electrical, optical, and mechanical properties. Significant differences between ZnO and PLGA systems have been found; in this study, we remark on the potential use of these models and the necessity to describe crucial surface aspects that might be challenging to observe with experimental approaches but which can modulate the performance of nanocomposites.
RESUMO
Metal-insulator-metal (MIM) diodes are very interesting in many different applications exploiting environment-friendly renewable energy solutions. Moreover, since the dimensions of such devices are at the nanoscale, the size and the characteristics of their constitutive elements can drastically influence their macroscale performance. As it could be difficult to describe in detail the physical phenomena occurring among materials in nanoscale systems, in this work first-principles calculations have been used to study the structural and electrical properties of three different hafnium oxide (HfO2)-MIM diodes. These devices have been simulated at the atomistic level by interposing 3 nm of HfO2 between drain and source electrodes made of gold and platinum, respectively. The monoclinic and orthorhombic polymorphs of HfO2 have been considered to model different types of MIM diodes, and the interface geometries have been optimized to compute the current-voltage characteristics, reflecting the tunneling mechanisms occurring in such devices. The calculation of the transmission pathways has also been carried out to investigate the effects of atomistic coordinates despite the use of the same material. The results demonstrate the role of the Miller indices of metals and the influence of the HfO2 polymorphs on the MIM properties. In this study, the importance of interface phenomena on the measurable properties of the proposed devices has been investigated in detail.
RESUMO
MoO3 and MoO2 systems have attracted particular attention for many widespread applications thanks to their electronic and optical peculiarities; from the crystallographic point of view, MoO3 adopts a thermodynamically stable orthorhombic phase (α-MoO3) belonging to the space group Pbmn, while MoO2 assumes a monoclinic arrangement characterized by space group P21/c. In the present paper, we investigated the electronic and optical properties of both MoO3 and MoO2 by using Density Functional Theory calculations, in particular, the Meta Generalized Gradient Approximation (MGGA) SCAN functional together with the PseudoDojo pseudopotential, which were used for the first time to obtain a deeper insight into the nature of different Mo-O bonds in these materials. The calculated density of states, the band gap, and the band structure were confirmed and validated by comparison with already available experimental results, while the optical properties were validated by recording optical spectra. Furthermore, the calculated band-gap energy value for the orthorhombic MoO3 showed the best match to the experimental value reported in the literature. All these findings suggest that the newly proposed theoretical techniques reproduce the experimental evidence of both MoO2 and MoO3 systems with high accuracy.
RESUMO
HfO2 can assume different crystalline structures, such as monoclinic, orthorhombic, and cubic polymorphs, each one characterized by unical properties. The peculiarities of this material are also strongly related to the presence of doping elements in the unit cell. Thus, the present paper has the main purpose of studying and comparing twelve different systems characterized by diverse polymorphs and doping percentages. In particular, three different crystalline structures were considered: the monoclinic P21/c, the orthorhombic Pca21, and the cubic Fm3¯m phases of HfO2. Each one has been studied by using Y as a doping agent with three different contents: 0% Y:HfO2, 8% Y:HfO2, 12% Y:HfO2, and 16% Y:HfO2. For all the systems, density functional theory (DFT) methods based on PBE/GGA, and on the HSE hybrid functionals were used to optimize the geometry as well as to study their optical properties. Depending on the polymorphs, Y affects the formation energy in different ways and causes changes in the optical properties. When the percentage of Y did not exceed 12%, a stabilization of the cubic phase fraction and an increase of the dielectric constant was observed. Additionally, the calculated optical bandgap energies and the refractive index are examined to provide an overview of the systems and are compared with experimental data. The bandgaps obtained are in perfect agreement with the experimental values and show a slight increase as the doping percentage grows, while only minor differences are found between the three polymorphs in terms of both refractive index and optical band gap. The adopted first principles study generates a reasonable prediction of the physical-chemical properties of all the systems, thus identifying the effects of doping phenomena.
RESUMO
A VO2(B) polymorph has been thoroughly investigated by means of density functional theory (DFT) calculations to evaluate the structure, Raman spectrum, cohesive energy, phonon band structure, an delectronic and optical properties. Among the computed Raman modes, eight of them have been assigned to the VO2(B) structure in full agreement with the corresponding experimental spectra. The minimized structure of the VO2(B) polymorph indicated the presence of negative frequencies in its phonon dispersion curves, confirming the dynamic instability of this material. Herein, the combination of generalized gradient approximation (GGA)/PBEsol with a hybrid HSE functional has been employed to perform ab initio calculations on VO2(B), since the conventional semi-local DFT calculations are believed to underestimate the band gap of materials. By considering the electronic structure calculations, for the first time, we found that the calibration of the PBEsol functional can efficiently model the metallic-like properties of VO2(B) with a band gap of 0.26 eV, while the corresponding electronic bandgap of VO2(B) based on the HSE functional possesses a larger band gap of 0.67 eV. The prediction of optical characteristics of VO2(B) indicated that the optical conductivity of VO2(B) lies in the infrared region of light. This work strongly suggests the combination of GGA/PBEsol with HSE hybrid functionals to carefully describe the physical properties of smart materials exploitable in electronics and optoelectronics applications. The nanostructure of VO2(B) looks promising for IR photodetectors and smart windows applications as a semiconductor material with excellent optical features. It is predicted that in the future VO2(B) will continue to expand the envelope of its capabilities because of its remarkable properties.
RESUMO
We have studied the structural, electronic, magnetic, and optical properties of the VO2(B) polymorph using first-principles calculations based on density functional theory (DFT). This polymorph was found to display four optimized structures namely VO2(B)PP, VO2(B)LP, VO2(B)PPD, and VO2(B)LPD using the generalized gradient approximation (GGA) PBE exchange-correlation functional by including/excluding van der Waals interaction. Our derivation provides a theoretical justification for adding an on-site Coulomb U value in the conventional DFT calculations to allow a direct comparison of the two methods. We predicted a zero bandgap of the VO2(B) structure based on GGA/PBE. However, by GGA/PBE + U, we found accurate bandgap values of 0.76, 0.66, and 0.70 eV for VO2(B)PP, VO2(B)LP, and VO2(B)PPD, respectively. The results obtained from DFT + U were accompanied by a structural transition from the metallic to semiconductor property. Here, we verified the non-magnetic characteristic of the monoclinic VO2(B) phase with some available experimental and theoretical data. However, the debate on the magnetic property of this polymorph remains unresolved. Imaginary and real parts of the dielectric function, as computed with the GGA/PBE functional and the GGA/PBE + U functional, were also reported. The first absorption peaks of all considered geometries in the imaginary part of the dielectric constants indicated that the VO2(B) structure could perfectly absorb infrared light. The computed static dielectric constants with positive values, as derived from the optical properties, confirmed the conductivity of this material. Among the four proposed geometries of VO2(B) in this study, the outcomes obtained by VO2(B)PPD reveal good results owing to the excellent consistency of its bandgap, magnetic and optical properties with other experimental and theoretical observations. The theoretical framework in our study will provide useful insight for future practical applications of the VO2(B) polymorph in electronics and optoelectronics.
RESUMO
HfO2 shows different polymorphs, including monoclinic and orthorhombic ones, that exhibit singular properties. Moreover, the character of HfO2 is also influenced by the Zr atoms as a doping agent. Here, an extensive study of the monoclinic P21/c and the orthorhombic Pca21 polymorphs of HfO2, Hf0.75Zr0.25O2, and Hf0.5Zr0.5O2 is reported. For all six systems, density functional theory (DFT) methods based on generalized gradient approximations (GGAs) were first used; then the GGA + U method was settled and calibrated to describe the electrical and optical properties of polymorphs and the responses to the oxygen vacancies. Zr had different effects in relation to the polymorph; moreover, the amount of Zr led to important differences in the optical properties of the Pca21 polymorph. Finally, oxygen vacancies were investigated, showing an important modulation of the properties of HfxZryO2 nanostructures. The combined GGA and GGA + U methods adopted in this work generate a reasonable prediction of the physicochemical properties of o- and m-HfxZryO2, identifying the effects of doping phenomena.