Self-limiting fall armyworm: a new approach in development for sustainable crop protection and resistance management.

BACKGROUND: The fall armyworm, Spodoptera frugiperda, is a significant and widespread pest of maize, sorghum, rice, and other economically important crops. Successful management of this caterpillar pest has historically relied upon application of synthetic insecticides and through cultivation of genetically engineered crops expressing insecticidal proteins (Bt crops). Fall armyworm has, however, developed resistance to both synthetic insecticides and Bt crops, which risks undermining the benefits delivered by these important crop protection tools. Previous modelling and empirical studies have demonstrated that releases of insecticide- or Bt-susceptible insects genetically modified to express conditional female mortality can both dilute insecticide resistance and suppress pest populations. RESULTS: Here, we describe the first germline transformation of the fall armyworm and the development of a genetically engineered male-selecting self-limiting strain, OX5382G, which exhibits complete female mortality in the absence of an additive in the larval diet. Laboratory experiments showed that males of this strain are competitive against wild-type males for copulations with wild-type females, and that the OX5382G self-limiting transgene declines rapidly to extinction in closed populations following the cessation of OX5382G male releases. Population models simulating the release of OX5382G males in tandem with Bt crops and non-Bt 'refuge' crops show that OX5382G releases can suppress fall armyworm populations and delay the spread of resistance to insecticidal proteins. CONCLUSIONS: This article describes the development of self-limiting fall armyworm designed to control this pest by suppressing pest populations, and population models that demonstrate its potential as a highly effective method of managing resistance to Bt crops in pest fall armyworm populations. Our results provide early promise for a potentially valuable future addition to integrated pest management strategies for fall armyworm and other pests for which resistance to existing crop protection measures results in damage to crops and impedes sustainable agriculture.

Implementing the sterile insect technique with RNA interference - a review.

We review RNA interference (RNAi) of insect pests and its potential for implementing sterile insect technique (SIT)-related control. The molecular mechanisms that support RNAi in pest species are reviewed in detail, drawing on literature from a range of species including Drosophila melanogaster Meigen and Homo sapiens L. The underlying genes that enable RNAi are generally conserved across taxa, although variance exists in both their form and function. RNAi represents a plausible, non-GM system for targeting populations of insects for control purposes, if RNAi effector molecules can be delivered environmentally (eRNAi). We consider studies of eRNAi from across several insect orders and review to what extent taxonomy, genetics, and differing methods of double-stranded (ds) RNA synthesis and delivery can influence the efficiency of gene knockdown. Several factors, including the secondary structure of the target mRNA and the specific nucleotide sequence of dsRNA effector molecules, can affect the potency of eRNAi. However, taxonomic relationships between insects cannot be used to reliably forecast the efficiency of an eRNAi response. The mechanisms by which insects acquire dsRNA from their environment require further research, but the evidence to date suggests that endocytosis and transport channels both play key roles. Delivery of RNA molecules packaged in intermediary carriers such as bacteria or nanoparticles may facilitate their entry into and through the gut, and enable the evasion of host defence systems, such as toxic pH, that would otherwise attenuate the potential for RNAi.

Transgene-based, female-specific lethality system for genetic sexing of the silkworm, Bombyx mori.

Transgene-based genetic sexing methods are being developed for insects of agricultural and public health importance. Male-only rearing has long been sought in sericulture because males show superior economic characteristics, such as better fitness, lower food consumption, and higher silk yield. Here we report the establishment of a transgene-based genetic sexing system for the silkworm, Bombyx mori. We developed a construct in which a positive feedback loop regulated by sex-specific alternative splicing leads to high-level expression of the tetracycline-repressible transactivator in females only. Transgenic animals show female-specific lethality during embryonic and early larval stages, leading to male-only cocoons. This transgene-based female-specific lethal system not only has wide application in sericulture, but also has great potential in lepidopteran pest control.

Pest control and resistance management through release of insects carrying a male-selecting transgene.

BACKGROUND: Development and evaluation of new insect pest management tools is critical for overcoming over-reliance upon, and growing resistance to, synthetic, biological and plant-expressed insecticides. For transgenic crops expressing insecticidal proteins from the bacterium Bacillus thuringiensis ('Bt crops') emergence of resistance is slowed by maintaining a proportion of the crop as non-Bt varieties, which produce pest insects unselected for resistance. While this strategy has been largely successful, multiple cases of Bt resistance have now been reported. One new approach to pest management is the use of genetically engineered insects to suppress populations of their own species. Models suggest that released insects carrying male-selecting (MS) transgenes would be effective agents of direct, species-specific pest management by preventing survival of female progeny, and simultaneously provide an alternative insecticide resistance management strategy by introgression of susceptibility alleles into target populations. We developed a MS strain of the diamondback moth, Plutella xylostella, a serious global pest of crucifers. MS-strain larvae are reared as normal with dietary tetracycline, but, when reared without tetracycline or on host plants, only males will survive to adulthood. We used this strain in glasshouse-cages to study the effect of MS male P. xylostella releases on target pest population size and spread of Bt resistance in these populations. RESULTS: Introductions of MS-engineered P. xylostella males into wild-type populations led to rapid pest population decline, and then elimination. In separate experiments on broccoli plants, relatively low-level releases of MS males in combination with broccoli expressing Cry1Ac (Bt broccoli) suppressed population growth and delayed the spread of Bt resistance. Higher rates of MS male releases in the absence of Bt broccoli were also able to suppress P. xylostella populations, whereas either low-level MS male releases or Bt broccoli alone did not. CONCLUSIONS: These results support theoretical modeling, indicating that MS-engineered insects can provide a powerful pest population suppressing effect, and could effectively augment current Bt resistance management strategies. We conclude that, subject to field confirmation, MS insects offer an effective and versatile control option against P. xylostella and potentially other pests, and may reduce reliance on and protect insecticide-based approaches, including Bt crops.

Recovering individual haplotypes and a contiguous genome assembly from pooled long-read sequencing of the diamondback moth (Lepidoptera: Plutellidae).

The assembly of divergent haplotypes using noisy long-read data presents a challenge to the reconstruction of haploid genome assemblies, due to overlapping distributions of technical sequencing error, intralocus genetic variation, and interlocus similarity within these data. Here, we present a comparative analysis of assembly algorithms representing overlap-layout-consensus, repeat graph, and de Bruijn graph methods. We examine how postprocessing strategies attempting to reduce redundant heterozygosity interact with the choice of initial assembly algorithm and ultimately produce a series of chromosome-level assemblies for an agricultural pest, the diamondback moth, Plutella xylostella (L.). We compare evaluation methods and show that BUSCO analyses may overestimate haplotig removal processing in long-read draft genomes, in comparison to a k-mer method. We discuss the trade-offs inherent in assembly algorithm and curation choices and suggest that "best practice" is research question dependent. We demonstrate a link between allelic divergence and allele-derived contig redundancy in final genome assemblies and document the patterns of coding and noncoding diversity between redundant sequences. We also document a link between an excess of nonsynonymous polymorphism and haplotigs that are unresolved by assembly or postassembly algorithms. Finally, we discuss how this phenomenon may have relevance for the usage of noisy long-read genome assemblies in comparative genomics.

Female-specific insect lethality engineered using alternative splicing.

The Sterile Insect Technique is a species-specific and environmentally friendly method of pest control involving mass release of sterilized insects that reduce the wild population through infertile matings. Insects carrying a female-specific autocidal genetic system offer an attractive alternative to conventional sterilization methods while also eliminating females from the release population. We exploited sex-specific alternative splicing in insects to engineer female-specific autocidal genetic systems in the Mediterranean fruit fly, Ceratitis capitata. These rely on the insertion of cassette exons from the C. capitata transformer gene into a heterologous tetracycline-repressible transactivator such that the transactivator transcript is disrupted in male splice variants but not in the female-specific one. As the key components of these systems function across a broad phylogenetic range, this strategy addresses the paucity of sex-specific expression systems (e.g., early-acting, female-specific promoters) in insects other than Drosophila melanogaster. The approach may have wide applicability for regulating gene expression in other organisms, particularly for combinatorial control with appropriate promoters.

Transposon-free insertions for insect genetic engineering.

Methods involving the release of transgenic insects in the field hold great promise for controlling vector-borne diseases and agricultural pests. Insect transformation depends on nonautonomous transposable elements as gene vectors. The resulting insertions are stable in the absence of suitable transposase, however, such absence cannot always be guaranteed. We describe a method for post-integration elimination of all transposon sequences in the pest insect Medfly, Ceratitis capitata. The resulting insertions lack transposon sequences and are therefore impervious to transposase activity.

The application of self-limiting transgenic insects in managing resistance in experimental metapopulations.

The mass release of transgenic insects carrying female lethal self-limiting genes can reduce pest insect populations. Substantial releases are also a novel resistance management tool, since wild type alleles conferring susceptibility to pesticides can dilute resistance alleles in target populations. However, a potential barrier is the need for large-scale area-wide releases. Here, we address whether localized releases of transgenic insects could provide an alternative means of population suppression and resistance management, without serious loss of efficacy.We used experimental mesocosms constituting insect metapopulations to explore the evolution of resistance to the Bacillus thuringiensis toxin Cry1Ac in a high-dose/refugia landscape in the insect Plutella xylostella. We ran two selection experiments, the first compared the efficacy of "everywhere" releases and negative controls to a spatially density-dependent or "whack-a-mole" strategy that concentrated release of transgenic insects in subpopulations with elevated resistance. The second experiment tested the relative efficacy of whack-a-mole and everywhere releases under spatially homogenous and heterogeneous selection pressure.The whack-a-mole releases were less effective than everywhere releases in terms of slowing the evolution of resistance, which, in the first experiment, largely prevented the evolution of resistance. In contrast to predictions, heterogeneous whack-a-mole releases were no more effective under heterogeneous selection pressure. Heterogeneous selection pressure did, however, reduce total insect population sizes.Whack-a-mole releases provided early population suppression, indistinguishable from homogeneous everywhere releases. However, insect population densities tracked the evolution of resistance in this system, as phenotypic resistance provides access to additional diet containing the toxin Cry1Ac. Thus, as resistance levels diverged between treatments, carrying capacities and population sizes increased under the whack-a-mole approach. Synthesis and applications. Spatially density-dependent releases of transgenic insects, particularly those targeting source populations at a landscape level, could suppress pest populations in the absence of blanket area-wide releases. The benefits of self-limiting transgenic insects were reduced in spatially localized releases, suggesting that they are not ideal for "spot" treatment of resistance problems. Nevertheless, spatially homogeneous or heterogeneous releases could be used to support other resistance management interventions.

Response to a Synthetic Pheromone Source by OX4319L, a Self-Limiting Diamondback Moth (Lepidoptera: Plutellidae) Strain, and Field Dispersal Characteristics of its Progenitor Strain.

The diamondback moth, Plutella xylostella L. (Lepidoptera: Plutellidae), is a global pest that infests vegetable and field crops within the Brassica family. A genetically engineered strain of P. xylostella, OX4319L, carrying a 'self-limiting' gene, has shown potential for managing P. xylostella populations, using sustained releases of OX4319L male moths. In order for such a strain to provide control, the transgenic individuals must exhibit attraction to female P. xylostella sex pheromone and adequate dispersal in the field. In this study, we tested these key traits. First, we compared the responses of the OX4319L male moths to a synthetic female sex pheromone source in wind tunnel trials to those of males from three other strains. We found that OX4319L males responded comparably to strains of non-engineered males, with all males flying upwind towards the pheromone source. Second, we used mark-release-recapture studies of a wildtype P. xylostella strain, from which the OX4319L strain was originally developed, to assess dispersal under field conditions. Released males were recaptured using both pheromone-baited and passive traps within a 2.83 ha circular cabbage field, with a recapture rate of 7.93%. Males were recaptured up to the boundary of the field at 95 m from the central release point. The median dispersal of males was 14 m. These results showed the progenitor strain of OX4319L retained its ability to disperse within a host field. The results of these experiments are discussed in relation to the potential for the effective use of engineered male-selecting P. xylostella strains under field conditions.

First Field Release of a Genetically Engineered, Self-Limiting Agricultural Pest Insect: Evaluating Its Potential for Future Crop Protection.

Alternative, biologically-based approaches for pest management are sorely needed and one approach is to use genetically engineered insects. Herein we describe a series of integrated field, laboratory and modeling studies with the diamondback moth, Plutella xylostella, a serious global pest of crucifers. A "self-limiting" strain of Plutella xylostella (OX4319L), genetically engineered to allow the production of male-only cohorts of moths for field releases, was developed as a novel approach to protect crucifer crops. Wild-type females that mate with these self-limiting males will not produce viable female progeny. Our previous greenhouse studies demonstrated that releases of OX4319L males lead to suppression of the target pest population and dilution of insecticide-resistance genes. We report results of the first open-field release of a non-irradiated, genetically engineered self-limiting strain of an agricultural pest insect. In a series of mark-release-recapture field studies with co-releases of adult OX4319L males and wild-type counterparts, the dispersal, persistence and field survival of each strain were measured in a 2.83 ha cabbage field. In most cases, no differences were detected in these parameters. Overall, 97.8% of the wild-type males and 95.4% of the OX4319L males recaptured dispersed <35 m from the release point. The predicted persistence did not differ between strains regardless of release rate. With 95% confidence, 75% of OX4319L males released at a rate of 1,500 could be expected to live between 3.5 and 5.4 days and 95% of these males could be expected to be detected within 25.8-34.9 m from the release point. Moth strain had no effect on field survival but release rate did. Collectively, these results suggest similar field behavior of OX4319L males compared to its wild-type counterpart. Laboratory studies revealed no differences in mating competitiveness or intrinsic growth rates between the strains and small differences in longevity. Using results from these studies, mathematical models were developed that indicate release of OX4319L males should offer efficacious pest management of P. xylostella. Further field studies are recommended to demonstrate the potential for this self-limiting P. xylostella to provide pest suppression and resistance management benefits, as was previously demonstrated in greenhouse studies.

A dominant lethal genetic system for autocidal control of the Mediterranean fruitfly.

The Sterile Insect Technique (SIT) used to control insect pests relies on the release of large numbers of radiation-sterilized insects. Irradiation can have a negative impact on the subsequent performance of the released insects and therefore on the cost and effectiveness of a control program. This and other problems associated with current SIT programs could be overcome by the use of recombinant DNA methods and molecular genetics. Here we describe the construction of strains of the Mediterranean fruit fly (medfly) harboring a tetracycline-repressible transactivator (tTA) that causes lethality in early developmental stages of the heterozygous progeny but has little effect on the survival of the parental transgenic tTA insects. We show that these properties should prove advantageous for the implementation of insect pest control programs.

Combining the high-dose/refuge strategy and self-limiting transgenic insects in resistance management-A test in experimental mesocosms.

The high-dose/refuge strategy has been the primary approach for resistance management in transgenic crops engineered with Bacillus thuringiensis toxins. However, there are continuing pressures from growers to reduce the size of Bt toxin-free refugia, which typically suffer higher damage from pests. One complementary approach is to release male transgenic insects with a female-specific self-limiting gene. This technology can reduce population sizes and slow the evolution of resistance by introgressing susceptible genes through males. Theory predicts that it could be used to facilitate smaller refugia or reverse the evolution of resistance. In this study, we used experimental evolution with caged insect populations to investigate the compatibility of the self-limiting system and the high-dose/refuge strategy in mitigating the evolution of resistance in diamondback moth, Plutella xylostella. The benefits of the self-limiting system were clearer at smaller refuge size, particularly when refugia were inadequate to prevent the evolution of resistance. We found that transgenic males in caged mesocosms could suppress population size and delay resistance development with 10% refugia and 4%-15% initial resistance allele frequency. Fitness costs in hemizygous transgenic insects are particularly important for introgressing susceptible alleles into target populations. Fitness costs of the self-limiting gene in this study (P. xylostella OX4139 line L) were incompletely dominant, and reduced fecundity and male mating competitiveness. The experimental evolution approach used here illustrates some of the benefits and pitfalls of combining mass release of self-limiting insects and the high-dose/refuge strategy, but does indicate that they can be complementary.

Population-level effects of fitness costs associated with repressible female-lethal transgene insertions in two pest insects.

Genetic control strategies offer great potential for the sustainable and effective control of insect pests. These strategies involve the field release of transgenic insects with the aim of introducing engineered alleles into wild populations, either permanently or transiently. Their efficacy can therefore be reduced if transgene-associated fitness costs reduce the relative performance of released insects. We describe a method of measuring the fitness costs associated with transgenes by analyzing their evolutionary trajectories when placed in competition with wild-type alleles in replicated cage populations. Using this method, we estimated lifetime fitness costs associated with two repressible female-lethal transgenes in the diamondback moth and olive fly as being acceptable for field suppression programs. Furthermore, using these estimates of genotype-level fitness costs, we were able to project longer-term evolutionary trajectories for the transgenes investigated. Results from these projections demonstrate that although transgene-associated fitness costs will ultimately cause these transgenes to become extinct, even when engineered lethality is repressed, they may persist for varying periods of time before doing so. This implies that tetracycline-mediated transgene field persistence in these strains is unlikely and suggests that realistic estimates of transgene-associated fitness costs may be useful in trialing 'uncoupled' gene drive system components in the field.

Engineered female-specific lethality for control of pest Lepidoptera.

The sterile insect technique (SIT) is a pest control strategy involving the mass release of radiation-sterilized insects, which reduce the target population through nonviable matings. In Lepidoptera, SIT could be more broadly applicable if the deleterious effects of sterilization by irradiation could be avoided. Moreover, male-only release can improve the efficacy of SIT. Adequate methods of male-only production in Lepidoptera are currently lacking, in contrast to some Diptera. We describe a synthetic genetic system that allows male-only moth production for SIT and also replaces radiation sterilization with inherited female-specific lethality. We sequenced and characterized the doublesex (dsx) gene from the pink bollworm (Pectinophora gossypiella). Sex-alternate splicing from dsx was used to develop a conditional lethal genetic sexing system in two pest moths: the diamondback moth (Plutella xylostella) and pink bollworm. This system shows promise for enhancing existing pink bollworm SIT, as well as broadening SIT-type control to diamondback moth and other Lepidoptera.

Field longevity of a fluorescent protein marker in an engineered strain of the pink bollworm, Pectinophora gossypiella (Saunders).

The cotton pest, pink bollworm (Pectinophora gossypiella (Saunders)), is a significant pest in most cotton-growing areas around the world. In southwestern USA and northern Mexico, pink bollworm is the target of the sterile insect technique (SIT), which relies on the mass-release of sterile pink bollworm adults to over-flood the wild population and thereby reduce it over time. Sterile moths reared for release are currently marked with a dye provided in their larval diet. There are concerns, however, that this marker fails from time to time, leading to sterile moths being misidentified in monitoring traps as wild moths. This can lead to expensive reactionary releases of sterile moths. We have developed a genetically marked strain that is engineered to express a fluorescent protein, DsRed2, which is easily screened under a specialised microscope. In order to test this marker under field conditions, we placed wild-type and genetically marked moths on traps and placed them in field cages. The moths were then screened, in a double-blind fashion, for DsRed2 fluorescence at regular intervals to determine marker reliability over time. The marker was shown to be robust in very high temperatures and generally proved reliable for a week or longer. More importantly, genotyping of moths on traps by PCR screening of the moths was 100% correct. Our findings indicate that this strain--and fluorescent protein markers in general--could make a valuable contribution to SIT.

Engineered repressible lethality for controlling the pink bollworm, a lepidopteran pest of cotton.

The sterile insect technique (SIT) is an environmentally friendly method of pest control in which insects are mass-produced, irradiated and released to mate with wild counterparts. SIT has been used to control major pest insects including the pink bollworm (Pectinophora gossypiella Saunders), a global pest of cotton. Transgenic technology has the potential to overcome disadvantages associated with the SIT, such as the damaging effects of radiation on released insects. A method called RIDL (Release of Insects carrying a Dominant Lethal) is designed to circumvent the need to irradiate insects before release. Premature death of insects' progeny can be engineered to provide an equivalent to sterilisation. Moreover, this trait can be suppressed by the provision of a dietary antidote. In the pink bollworm, we generated transformed strains using different DNA constructs, which showed moderate-to-100% engineered mortality. In permissive conditions, this effect was largely suppressed. Survival data on cotton in field cages indicated that field conditions increase the lethal effect. One strain, called OX3402C, showed highly penetrant and highly repressible lethality, and was tested on host plants where its larvae caused minimal damage before death. These results highlight a potentially valuable insecticide-free tool against pink bollworm, and indicate its potential for development in other lepidopteran pests.

Field performance of a genetically engineered strain of pink bollworm.

Pest insects harm crops, livestock and human health, either directly or by acting as vectors of disease. The Sterile Insect Technique (SIT)--mass-release of sterile insects to mate with, and thereby control, their wild counterparts--has been used successfully for decades to control several pest species, including pink bollworm, a lepidopteran pest of cotton. Although it has been suggested that genetic engineering of pest insects provides potential improvements, there is uncertainty regarding its impact on their field performance. Discrimination between released and wild moths caught in monitoring traps is essential for estimating wild population levels. To address concerns about the reliability of current marking methods, we developed a genetically engineered strain of pink bollworm with a heritable fluorescent marker, to improve discrimination of sterile from wild moths. Here, we report the results of field trials showing that this engineered strain performed well under field conditions. Our data show that attributes critical to SIT in the field--ability to find a mate and to initiate copulation, as well as dispersal and persistence in the release area--were comparable between the genetically engineered strain and a standard strain. To our knowledge, these represent the first open-field experiments with a genetically engineered insect. The results described here provide encouragement for the genetic control of insect pests.