RESUMO
AIM: Platelet-rich plasma (PRP) is an autologous blood-derived material that has been used to enhance bone regeneration. Clinical studies, however, reported inconsistent outcomes. This study aimed to assess the effect of changes in leucocyte and PRP (L-PRP) composition on bone defect healing. MATERIALS AND METHODS: L-PRPs were prepared using different centrifugation methods and their regenerative potential was assessed in an in-vivo rat model. Bilateral critical-size tibial bone defects were created and filled with single-spin L-PRP, double-spin L-PRP, or filtered L-PRP. Empty defects and defects treated with collagen scaffolds served as controls. Rats were euthanized after 2 weeks, and their tibias were collected and analysed using micro-CT and histology. RESULTS: Double-spin L-PRP contained higher concentrations of platelets than single-spin L-PRP and filtered L-PRP. Filtration of single-spin L-PRP resulted in lower concentrations of minerals and metabolites. In vivo, double-spin L-PRP improved bone healing by significantly reducing the size of bone defects (1.08 ± 0.2 mm3 ) compared to single-spin L-PRP (1.42 ± 0.27 mm3 ) or filtered L-PRP (1.38 ± 0.28 mm3 ). There were fewer mast cells, lymphocytes, and macrophages in defects treated with double-spin L-PRP than in those treated with single-spin or filtered L-PRP. CONCLUSION: The preparation method of L-PRP affects their composition and potential to regenerate bone.
Assuntos
Plasma Rico em Plaquetas , Animais , Regeneração Óssea , Colágeno , Tecido Conjuntivo , Ratos , TíbiaRESUMO
OBJECTIVES: The aim of this study was to detect microcracks and cuspal deflection in tooth crown following the application of temporary filling using microcomputed tomography (micro-CT). MATERIALS AND METHODS: A mesio-occluso-distal cavity preparation was performed, followed by endodontic access cavity preparation and root canal shaping. Cavities were classified into two groups according to the type of temporary filling material used; Coltosol F (Coltene Whaledent) (Group I) and intermediate restorative material (IRM; Dentsply Sirona) (Group II). Micro-CT images before and after temporary filling material placement were obtained and then compared for the presence of microcracks. Microcracks considered in our data analysis were the new ones that were detected after temporary filling material placement. The mean number of new microcracks per tooth recorded for both groups were compared using Mann-Whitney U test. The number of teeth with new microcracks in both groups was compared by chi-square test. Repeated measures t test was conducted to observe the effect of temporary filling on the intercuspal distance (ICD). Also, the mean difference in the ICDs detected after temporary filling placement in both groups were compared by independent t test. The significance level was set at 5%. RESULTS: Eleven microcracks were detected in group I, whereas only three microcracks were observed in group II (p < 0.01). The mean numbers of new microcracks were 0.84 and 0.21 in group I and II, respectively (p < 0.01). There was no significant difference in the ICDs in group I (0.006±0.02 mm) and group II (0.018 ± 0.03 mm) (p > 0.26). Most of the microcracks were found in the dentin structure. The cavity's box area was more affected by new microcracks, compared with the cavity's coronal area. The new microcracks were mainly observed in the mesiodistal direction. No complete fractures were reported in our study. CONCLUSIONS: Both temporary fillings induced microcracks; Coltosol F can induce more microcracks than IRM in premolar teeth after 1-week storage. Most of the microcracks were observed in the dentin structure of the cavity's box area running mesiodistally. CLINICAL RELEVANCE: The results indicated that the tested temporary fillings developed microcracks on the tooth crown with slight deflection of the cusps.
Assuntos
Materiais Restauradores do Canal Radicular , Fraturas dos Dentes/diagnóstico por imagem , Microtomografia por Raio-X , Dente Pré-Molar , Coroas , Dentina , Humanos , Preparo de Canal Radicular , Tratamento do Canal RadicularRESUMO
Three-dimensional printing (3DP) technology has revolutionized the field of the use of bioceramics for maxillofacial and periodontal applications, offering unprecedented control over the shape, size, and structure of bioceramic implants. In addition, bioceramics have become attractive materials for these applications due to their biocompatibility, biostability, and favorable mechanical properties. However, despite their advantages, bioceramic implants are still associated with inferior biological performance issues after implantation, such as slow osseointegration, inadequate tissue response, and an increased risk of implant failure. To address these challenges, researchers have been developing strategies to improve the biological performance of 3D-printed bioceramic implants. The purpose of this review is to provide an overview of 3DP techniques and strategies for bioceramic materials designed for bone regeneration. The review also addresses the use and incorporation of active biomolecules in 3D-printed bioceramic constructs to stimulate bone regeneration. By controlling the surface roughness and chemical composition of the implant, the construct can be tailored to promote osseointegration and reduce the risk of adverse tissue reactions. Additionally, growth factors, such as bone morphogenic proteins (rhBMP-2) and pharmacologic agent (dipyridamole), can be incorporated to promote the growth of new bone tissue. Incorporating porosity into bioceramic constructs can improve bone tissue formation and the overall biological response of the implant. As such, employing surface modification, combining with other materials, and incorporating the 3DP workflow can lead to better patient healing outcomes.
RESUMO
INTRODUCTION: Osteogenesis imperfecta (OI) is a genetic disorder characterized by bone fragility and craniofacial and dental abnormalities such as congenitally missing teeth and teeth that failed to erupt which are believed to be doubled in OI patients than normal populations and were associated with low oral health quality of life. However, the etiology of these abnormalities remains unclear. To understand the factors influencing missing and unerupted teeth, we investigated their prevalence in a cohort of OI patients as a function of the clinical phenotype (OI type), the genetic variant type, the tooth type and the onset of bisphosphonate treatment. METHOD: A total of 144 OI patients were recruited from The Shriners Hospital, Montreal, Canada, between 2016 and 2017. Patients were evaluated using intraoral photographs and panoramic radiographs. Missing teeth were evaluated in all patients, and unerupted teeth were assessed only in patients ≥15 years old (n = 82). RESULTS: On average, each OI patient had 2.4 missing teeth and 0.8 unerupted teeth, and the most common missing and unerupted teeth were the premolars and the upper second molars, respectively. These phenomena were more prominent in OI type III and IV than in OI type I, and were not sex or age-related. Missing teeth were significantly more common in patients with C-propeptide variants than all other variants (p-value <0.05). Unerupted teeth were significantly more common in patients with α1 and α2 glycine variants or substitutions than in those with haploinsufficiency variants. Early-onset of bisphosphonate treatment would significantly increase the risk of unerupted teeth in patients with OI types III and IV (OR = 1.68, 95% CI (1.15-1.53)). CONCLUSION: The prevalence of missing and unerupted teeth at the tooth type level in OI patients varies according to the nature of the collagen variants and the OI type. These findings highlight the role of collagen in tooth development and eruption.
Assuntos
Osteogênese Imperfeita , Dente não Erupcionado , Adolescente , Canadá , Humanos , Osteogênese Imperfeita/diagnóstico por imagem , Osteogênese Imperfeita/genética , Fenótipo , Qualidade de Vida , Dente não Erupcionado/diagnóstico por imagem , Dente não Erupcionado/epidemiologiaRESUMO
INTRODUCTION: Dental anomalies in Osteogenesis imperfecta (OI), such as tooth discoloration, pulp obliteration (calcified dental pulp space), and taurodontism (enlarged dental pulp space) vary between and within patients. To better understand the associations and variations in these anomalies, a cross-sectional study was designed to analyze the dental phenotype in OI patients at the individual tooth type. METHOD: A cohort of 171 individuals with OI type I, III and IV, aged 3-55â¯years, were recruited and evaluated for tooth discoloration, pulp obliteration, and taurodontism at the individual tooth level, using intraoral photographs and panoramic radiographs. RESULTS: Genetic variants were identified in 154 of the participants. Patients with Helical α1 and α2 glycine substitutions presented the highest prevalence of tooth discoloration, while those with α1 Haploinsufficiency had the lowest (<10%). C-propeptide variants did not cause discoloration but resulted in the highest pulp obliteration prevalence (~%20). The prevalence of tooth discoloration and pulp obliteration was higher in OI types III and IV and increased with age. Tooth discoloration was mainly observed in teeth known to have thinner enamel (i.e. lower anterior), while pulp obliteration was most prevalent in the first molars. A significant association was observed between pulp obliteration and tooth discoloration, and both were associated with a lack of occlusal contact. Taurodontism was only found in permanent teeth and affected mostly first molars, and its prevalence decreased with age. CONCLUSION: The dental phenotype evaluation at the tooth level revealed that different genetic variants and associated clinical phenotypes affect each tooth type differently, and genetic variants are better predictors of the dental phenotype than the type of OI. Our results also suggest that tooth discoloration is most likely an optical phenomenon inversely proportional to enamel thickness, and highly associated with pulp obliteration. In turn, pulp obliteration is proportional to patient age, it is associated with malocclusion and likely related to immature progressive dentin deposition. Taurodontism is an isolated phenomenon that is probably associated with delayed pulpal maturation.
Assuntos
Dentinogênese Imperfeita , Osteogênese Imperfeita , Dente , Estudos Transversais , Humanos , Osteogênese Imperfeita/genética , FenótipoRESUMO
The ideal bone substitute material should be mechanically strong, biocompatible with a resorption rate matching the rate of new bone formation. Brushite (dicalcium phosphate dihydrate) cement is a promising bone substitute material but with limited resorbability and mechanical properties. To improve the resorbability and mechanical performance of brushite cements, we incorporated gypsum (calcium sulfate dihydrate) and diazonium-treated polyglactin fibers which are well-known for their biocompatibility and bioresorbability. Here we show that by combining brushite and gypsum, we were able to fabricate biocompatible composite cements with high fracture toughness (0.47 MPa·m1/2) and a resorption rate that matched the rate of new bone formation. Adding functionalized polyglactin fibers to this composite cement further improved the fracture toughness up to 1.00 MPa·m1/2. XPS and SEM revealed that the improvement in fracture toughness is due to the strong interfacial bonding between the functionalized fibers and the cement matrix. This study shows that adding gypsum and functionalized polyglactin fibers to brushite cements results in composite biomaterials that combine high fracture toughness, resorbability, and biocompatibility, and have great potential for bone regeneration.
Assuntos
Fosfatos de Cálcio , Sulfato de Cálcio , Cimentos Ósseos , Teste de MateriaisRESUMO
The bone regenerative capacity of synthetic calcium phosphates (CaPs) can be enhanced through the enrichment with selected metal trace ions. However, defining the optimal elemental composition required for bone formation is challenging due to many possible concentrations and combinations of these elements. We hypothesized that the ideal elemental composition exists in the inorganic phase of the bone extracellular matrix (ECM). To study our hypothesis, we first obtained natural hydroxyapatite through the calcination of bovine bone, which was then investigated its reactivity with acidic phosphates to produce CaP cements. Bioceramic scaffolds fabricated using these cements were assessed for their composition, properties, and in vivo regenerative performance and compared with controls. We found that natural hydroxyapatite could react with phosphoric acid to produce CaP cements with biomimetic trace metals. These cements present significantly superior in vivo bone regenerative performance compared with cements prepared using synthetic apatite. In summary, this study opens new avenues for further advancements in the field of CaP bone biomaterials by introducing a simple approach to develop biomimetic CaPs. This work also sheds light on the role of the inorganic phase of bone and its composition in defining the regenerative properties of natural bone xenografts.
Assuntos
Biomimética , Regeneração Óssea/efeitos dos fármacos , Fosfatos de Cálcio/farmacologia , Cerâmica/farmacologia , Metais/farmacologia , Oligoelementos/farmacologia , Animais , Cimentos Ósseos/química , Fosfatos de Cálcio/química , Bovinos , Ácido Cítrico/farmacologia , Força Compressiva , Cristalografia por Raios X , Durapatita/química , Durapatita/isolamento & purificação , Feminino , Teste de Materiais , Metais/análise , Metais/uso terapêutico , Ácidos Fosfóricos/farmacologia , Ratos , Ratos Sprague-Dawley , Espectroscopia de Infravermelho com Transformada de Fourier , Tíbia/diagnóstico por imagem , Tíbia/efeitos dos fármacos , Tíbia/lesões , Oligoelementos/análise , Oligoelementos/uso terapêutico , Microtomografia por Raio-XRESUMO
Brushite cements are promising bone regeneration materials with limited biological and mechanical properties. Here, we engineer a mechanically improved brushite-collagen type I cement with enhanced biological properties by use of chiral chemistry; d- and l-tartaric acid were used to limit crystal growth and increase the mechanical properties of brushite-collagen cements. The impact of the chiral molecules on the cements was examined with Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). A 3-point bend test was utilized to study the fracture toughness, and cell attachment and morphology studies were carried out to demonstrate biocompatibility. XRD and SEM analyses showed that l-, but not d-tartaric acid, significantly restrained brushite crystal growth by binding to the {010} plane of the mineral and increased brushite crystal packing and the collagen interaction area. l-Tartaric acid significantly improved fracture toughness compared to traditional brushite by 30%. Collagen significantly enhanced cell morphology and focal adhesion expression on l-tartaric acid-treated brushite cements.
RESUMO
Natural biominerals, such as bones and teeth, use acidic matrix biomolecules to control growth, morphology, and organization of the brittle hydroxyapatite crystals. This interplay provides biominerals with outstanding mechanical properties. Recently, we reported that the l-enantiomer of chiral tartaric acid has a potent regulatory effect on the crystal structure and mechanical performance of brushite cement, a mineral with a monoclinic crystal system. We hypothesized that this strategy could be applied using various chiral α-hydroxycarboxylic acids to enhance the mechanical performance of calcium sulfate dihydrate cements, another mineral belonging to the monoclinic crystal system. Calcium sulfate cements are widely used in dentistry, medicine, and construction, but these cements have low mechanical properties. In this work, we first determined the impact of different chiral α-hydroxycarboxylic acids on the properties of calcium sulfate cements. After that, we focused on identifying the regulation effect of chiral tartaric acid on gypsum crystals precipitated in a supersaturated solution. Here, we show that the selective effect of α-hydroxycarboxylic acid l-enantiomers on calcium sulfate crystals improved the mechanical performance of gypsum cements, while d-enantiomer had a weak impact. Compare to the calcium sulfate cements prepared without additives, the presence of l-enantiomer enhanced the compressive strength and the fracture toughness of gypsum cements by 40 and 70%, respectively. Thus, these results prove the generalizability of this approach and help us to fabricate high-strength cements.
RESUMO
Chirality seems to play a key role in mineralization. Indeed, in biominerals, the biomolecules that guide the formation and organization of inorganic crystals and help construct materials with exceptional mechanical properties, are homochiral. Here, we show that addition of homochiral l-(+)-tartaric acid improved the mechanical properties of brushite bioceramics by decreasing their crystal size, following the classic Hall-Petch strengthening effect; d-(-)-tartaric acid had the opposite effect. Adding l-(+)-Tar increased both the compressive strength (26 MPa) and the fracture toughness (0.3 MPa m1/2) of brushite bioceramics, by 33% and 62%, respectively, compared to brushite bioceramics without additives. In addition, l-(+)-tartaric acid enabled the fabrication of cements with high powder-to-liquid ratios, reaching a compressive strength and fracture toughness as high as 32.2 MPa and 0.6 MPa m1/2, respectively, approximately 62% and 268% higher than that of brushite bioceramics prepared without additives, respectively. Characterization of brushite crystals from the macro- to the atomic-level revealed that this regulation is attributable to a stereochemical matching between l-(+)-tartaric acid and the chiral steps of brushite crystals, which results in inhibition of brushite crystallization. These findings provide insight into understanding the role of chirality in mineralization, and how to control the crystallographic structure of bioceramics to achieve high-performance mechanical properties. STATEMENT OF SIGNIFICANCE: Calcium-phosphate cements are promising bone repair materials. However, their suboptimal mechanical properties limit their clinical use. Natural biominerals have remarkable mechanical properties that are the result of controlled size, shape and organization of their inorganic crystals. This is achieved by biomineralization proteins that are homochiral, composed of l- amino acids. Despite the importance of chiral l-biomolecules in biominerals, using homochiral molecules to fabricate bone cements has not been studied yet. In this study, we showed that homochiral l-(+)-tartaric acid can regulate the crystal structure and improve the mechanical properties of a calcium-phosphate cement. Hence, these findings open the door for a new way of designing strong bone cement and highlight the importance of chirality in bioceramics.