RESUMO
Carbodiimides are important crosslinkers in organic synthesis and are used in the isocyanate industry as modifier additives. Therefore, the understanding of their formation is of high importance. In this work, we present a theoretical B3LYP/6-31G(d) and SMD solvent model and experimental investigation of the formation of diphenylcarbodiimide (CDI) from phenyl isocyanate using a phosphorus-based catalyst (MPPO) in ortho-dichlorobenzene (ODCB) solvent. Kinetic experiments were based on the volumetric quantitation of CO2 evolved, at different temperatures between 40 and 80 °C. Based on DFT calculations, we managed to construct a more detailed reaction mechanism compared to previous studies which is supported by experimental results. DFT calculations revealed that the mechanism is composed of two main parts, and the rate determining step of the first part, controlling the CO2 formation, is the first transition state with a 52.9 kJ mol-1 enthalpy barrier. The experimental activation energy was obtained from the Arrhenius plot (ln k vs. 1/T) using the observed second-order kinetics, and the obtained 55.8 ± 2.1 kJ mol-1 was in excellent agreement with the computational one, validating the complete mechanism, giving a better understanding of carbodiimide production from isocyanates.
Assuntos
Carbodi-Imidas , Isocianatos , Carbodi-Imidas/química , Isocianatos/química , Cinética , Termodinâmica , Catálise , Dióxido de Carbono/química , Solventes/química , TemperaturaRESUMO
Aromatic isocyanides have gained a lot of attention lately as promising antifungal and anticancer drugs, as well as high-performance fluorescent analytical probes for the detection of toxic metals, such as mercury, even in vivo. Since this topic is relatively new and aromatic isocyanides possess unique photophysical properties, the understanding of structure-behavior relationships and the preparation of novel potentially biologically active derivatives are of paramount importance. Here, we report the photophysical characterization of 1,5-diisocyanonaphthalene (DIN) backed by quantum chemical calculations. It was discovered that DIN undergoes hydrolysis in certain solvents in the presence of oxonium ions. By the careful control of the reaction conditions for the first time, the nonsymmetric product 1-formamido-5-isocyanonaphthalene (ICNF) could be prepared. Contrary to expectations, the monoformamido derivative showed a significant solvatochromic behavior with a ~50 nm range from hexane to water. This behavior was explained by the enhanced H-bond-forming ability of the formamide group. The significance of the hydrolysis reaction is that the isocyano group is converted to formamide in living organisms. Therefore, ICNF could be a potential drug (for example, antifungal) and the reaction can be used as a model for the preparation of other nonsymmetric formamido-isocyanoarenes. In contrast to its relative 1-amino-5-iscyanonaphthalene (ICAN), ICNF is highly fluorescent in water, enabling the development of a fluorescent turnoff probe.
Assuntos
Antifúngicos , Corantes Fluorescentes , Antifúngicos/farmacologia , Hidrólise , Corantes Fluorescentes/química , Água , CianetosRESUMO
Easy preparation, good yield and easy recovery are the key challenges in the development of industrial catalysts. To meet all these three criteria, we have prepared intelligent, magnetizable NiFe2O4- and CoFe2O4-supported palladium catalysts that can be easily and completely recovered from the reaction medium by magnetic separation. The fast and facile preparation was achieved by a solvothermal method followed by sonochemical-assisted decomposition of the palladium nanoparticles onto the surface of the magnetic nanoparticles. The metal-support interaction was enhanced by amine functionalization of the supports using monoethanolamine. The performance and stability of the non-functionalized and amine-functionalized NiFe2O4- and CoFe2O4-supported palladium catalysts were compared in the industrially important nitrobenzene hydrogenation reaction. All catalysts showed high catalytic activity during aniline synthesis; complete nitrobenzene conversion and high aniline yield (above 97 n/n%) and selectivity (above 98 n/n%) were achieved. However, during reuse tests, the activity of the non-functionalized catalysts decreased, as the palladium was leached from the surface of the support. On the other hand, in the case of their amine-functionalized counterparts, there was no decrease in activity, and a non-significant decrease in palladium content could be measured. Based on these results, it can be concluded that amine functionalization of transition metal ferrites may result in more effective catalysts due to the enhanced metal-carrier interaction between the support and the precious metal.
Assuntos
Nanopartículas Metálicas , Níquel , Aminas , Paládio , Hidrogenação , Cobalto , Compostos de Anilina , NitrobenzenosRESUMO
Catalysts with magnetic properties can be easily recovered from the reaction medium without loss by using a magnetic field, which highly improves their applicability. To design such systems, we have successfully combined the magnetic properties of nickel ferrite nanoparticles with the positive properties of carbon-based catalyst supports. Amine-functionalized NiFe2O4 nanoparticles were deposited on the surfaces of nitrogen-doped bamboo-like carbon nanotubes (N-BCNT) and carbon nanolayers (CNL) by using a coprecipitation process. The magnetizable catalyst supports were decorated by Pd nanoparticles, and their catalytic activity was tested through the hydrogenation of nitrobenzene (NB). By using the prepared catalysts, high nitrobenzene conversion (100% for 120 min at 333 K) and a high aniline yield (99%) were achieved. The Pd/NiFe2O4-CNL catalyst was remarkable in terms of stability during the reuse tests due to the strong interaction formed between the catalytically active metal and its support (the activity was retained during four cycles of 120 min at 333 K). Furthermore, despite the long-lasting mechanical stress, no significant palladium loss (only 0.08 wt%) was detected.
Assuntos
Nanotubos de Carbono , Níquel , Hidrogenação , Compostos de Anilina , NitrobenzenosRESUMO
The need for stable and well-defined magnetic nanoparticles is constantly increasing in biomedical applications; however, their preparation remains challenging. We used two different solvothermal methods (12 h reflux and a 4 min microwave, MW) to synthesize amine-functionalized zinc ferrite (ZnFe2O4-NH2) superparamagnetic nanoparticles. The morphological features of the two ferrite samples were the same, but the average particle size was slightly larger in the case of MW activation: 47 ± 14 nm (Refl.) vs. 63 ± 20 nm (MW). Phase identification measurements confirmed the exclusive presence of zinc ferrite with virtually the same magnetic properties. The Refl. samples had a zeta potential of -23.8 ± 4.4 mV, in contrast to the +7.6 ± 6.8 mV measured for the MW sample. To overcome stability problems in the colloidal phase, the ferrite nanoparticles were embedded in polyvinylpyrrolidone and could be easily redispersed in water. Two PVP-coated zinc ferrite samples were administered (1 mg/mL ZnFe2O4) in X BalbC mice and were compared as contrast agents in magnetic resonance imaging (MRI). After determining the r1/r2 ratio, the samples were compared to other commercially available contrast agents. Consistent with other SPION nanoparticles, our sample exhibits a concentrated presence in the hepatic region of the animals, with comparable biodistribution and pharmacokinetics suspected. Moreover, a small dose of 1.3 mg/body weight kg was found to be sufficient for effective imaging. It should also be noted that no toxic side effects were observed, making ZnFe2O4-NH2 advantageous for pharmaceutical formulations.
Assuntos
Meios de Contraste , Nanopartículas , Camundongos , Animais , Polímeros , Aminas , Zinco , Distribuição Tecidual , Imageamento por Ressonância Magnética/métodos , Compostos Férricos , Preparações FarmacêuticasRESUMO
Isocyanoaminoarenes (ICAAr-s) are a novel and versatile group of solvatochromic fluorophores. Despite their versatile applicability, such as antifungals, cancer drugs and analytical probes, they still represent a mostly unchartered territory among intramolecular charge-transfer (ICT) dyes. The current paper describes the preparation and detailed optical study of novel 1-isocyano-5-aminoanthrace (ICAA) and its N-methylated derivatives along with the starting 1,5-diaminoanthracene. The conversion of one of the amino groups of the diamine into an isocyano group significantly increased the polar character of the dyes, which resulted in a significant 50-70 nm (2077-2609 cm-1) redshift of the emission maximum and a broadened solvatochromic range. The fluorescence quantum yield of ICAAs is strongly influenced by the polarity of the solvent. The starting anthracene-diamine is highly fluorescent in every solvent (âf = 12-53%), while the isocyano derivatives are practically nonfluorescent in solvents more polar than dioxane. This phenomenon implies the potential application of ICAAs to probe the polarity of the medium and is favorable in practical applications, such as cell-staining, resulting in a reduced background fluorescence. The ICT character of the emission states of ICAAs are in good agreement with the computational findings presented in TD-DFT calculations and molecular electrostatic potential (MESP) isosurfaces.
Assuntos
Corantes Fluorescentes/química , Corantes Fluorescentes/síntese química , Fluorescência , Modelos Moleculares , Teoria Quântica , Solventes , Espectrometria de FluorescênciaRESUMO
Aniline (AN) is one of the most important compounds in the chemical industry and is prepared by the catalytic hydrogenation of nitrobenzene (NB). The development of novel, multifunctional catalysts which are easily recoverable from the reaction mixture is, therefore, of paramount importance. Compared to conventional filtration, magnetic separation is favored because it is cheaper and more facile. For satisfying these requirements, we developed manganese ferrite (MnFe2O4)-supported, magnetically separable palladium catalysts with high catalytic activity in the hydrogenation of nitrobenzene to aniline. In addition to high NB conversion and AN yield, remarkable aniline selectivity (above 96 n/n%) was achieved. Surprisingly, the magnetic support alone also shows moderate catalytic activity even without noble metals, and thus, up to 94 n/n% nitrobenzene conversion, along with 47 n/n% aniline yield, are attainable. After adding palladium nanoparticles to the support, the combined catalytic activity of the two nanomaterials yielded a fast, efficient, and highly selective catalyst. During the test of the Pd/MnFe2O4 catalyst in NB hydrogenation, no by-products were detected, and consequently, above 96 n/n% aniline yield and 96 n/n% selectivity were achieved. The activity of the Pd/MnFe2O4 catalyst was not particularly sensitive to the hydrogenation temperature, and reuse tests indicate its applicability in at least four cycles without regeneration. The remarkable catalytic activity and other favorable properties can make our catalyst potentially applicable to both NB hydrogenation and other similar or slightly different reactions.
Assuntos
Nanopartículas Metálicas , Paládio , Compostos de Anilina , Compostos Férricos , Hidrogenação , Manganês , Compostos de Manganês , Nanopartículas Metálicas/química , Nitrobenzenos/química , Paládio/químicaRESUMO
2,4-diaminotoluene (TDA) is one of the most important polyurethane precursors produced in large quantities by the hydrogenation of 2,4-dinitrotoluene using catalysts. Any improvement during the catalysis reaction is therefore of significant importance. Separation of the catalysts by filtration is cumbersome and causes catalyst loss. To solve this problem, we have developed magnetizable, amine functionalized ferrite supported palladium catalysts. Cobalt ferrite (CoFe2O4-NH2), nickel ferrite (NiFe2O4-NH2), and cadmium ferrite (CdFe2O4-NH2) magnetic catalyst supports were produced by a simple coprecipitation/sonochemical method. The nanospheres formed contain only magnetic (spinel) phases and show catalytic activity even without noble metals (palladium, platinum, rhodium, etc.) during the hydrogenation of 2,4-dinitrotoluene, 63% (n/n) conversion is also possible. By decorating the supports with palladium, almost 100% TDA selectivity and yield were ensured by using Pd/CoFe2O4-NH2 and Pd/NiFe2O4-NH2 catalysts. These catalysts possess highly favorable properties for industrial applications, such as easy separation from the reaction medium without loss by means of a magnetic field, enhanced reusability, and good dispersibility in aqueous medium. Contrary to non-functionalized supports, no significant leaching of precious metals could be detected even after four cycles.
Assuntos
Nanosferas , Paládio , Hidrogenação , Paládio/química , Cádmio , Aminas , CatáliseRESUMO
The combination of the sonochemical activation of Ni(NO3)2 and Co(NO3)2 in the presence of Fe(NO3)3 and polyethylene glycol and consecutive heat treatment of the formed metal hydroxides offers a cheap and efficient method for the preparation of nickel ferrite and cobalt ferrite magnetic nanoparticles, which can be successfully applied in the selective capture of fluorescently derivatized N-glycans from human serum. XRD measurement revealed that, besides the ferrite phase, nickel and cobalt oxides also form during heat treatment. The amount of simple metal oxides can be well controlled by the temperature of the heat treatment, since increasing temperature yielded higher spinel content. For both nickel and cobalt, the best heat treatment temperature was found to be 673 K, where the samples contained 84.1% nickel ferrite, and in the case of cobalt, almost pure (99.6%) cobalt ferrite could be prepared. FT-IR and zeta potential measurements indicated the presence of surface OH groups, which aided in the dispersion of the particles in water and, in addition, can promote the adsorption of polar compounds. The practical applicability of the magnetic nanopowders was demonstrated in the purification of fluorescently derivatized N-glycans (from human serum). Cobalt ferrite was found to be the most effective. Owing to the easy preparation and the simplicity of the magnetic separation the pure cobalt ferrite, magnetic nanoparticles could be efficient tools for the selective enrichment of serum N-glycans in HPLC measurements.
Assuntos
Nanopartículas de Magnetita , Níquel , Cobalto/química , Compostos Férricos/química , Humanos , Níquel/química , Óxidos , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
The catalytic hydrogenation of 2,4-dinitrotoluene (DNT) to 2,4-toluenediamine (TDA) is a key step in the production of polyurethanes; therefore, the development of efficient hydrogenation catalysts for industrial use is of paramount importance. In the present study, chromium(IV) oxide nanowires were decorated by palladium and platinum nanoparticles in a one-step, simple, and fast preparation method to yield highly efficient hydrogenation catalysts for immediate use. The nanoparticles were deposited onto the surface of CrO2 nanowires by using ultrasonic cavitation and ethanol as a reduction agent. Beneficially, the catalyst became catalytically active right at the end of the preparation and no further treatment was necessary. The activity of the Pd- and Pt-decorated CrO2 catalysts were compared in the hydrogenation of 2,4-dinitrotoluene (DNT). Both catalysts have shown high activity in the hydrogenation tests. The DNT conversion exceeded 98% in both cases, whereas the 2,4-toluenediamine (TDA) yields were 99.7 n/n% and 98.8 n/n%, with the Pd/CrO2 and Pt/CrO2, respectively, at 333 K and 20 bar H2 pressure. In the case of the Pt/CrO2 catalyst, 304.08 mol of TDA formed with 1 mol Pt after 1 h hydrogenation. Activation energies were also calculated to be approximately 24 kJâmol-1. Besides their immediate applicability, our catalysts were well dispersible in the reaction medium (methanolic solution of DNT). Moreover, because of their magnetic behavior, the catalysts were easy to handle and remove from the reaction media by using a magnetic field.
Assuntos
Compostos de Cromo/química , Nanopartículas Metálicas/química , Nanofios/química , Paládio/química , Platina/química , CatáliseRESUMO
Aromatic isocyanides including isocyanonaphthalene derivatives have been proven to be very effective fluorescent sensors for the quantification of Hg(II) ions in water. Thus, the reaction of 1,5-isocyanoaminonaphthalene (1,5-ICAN), which is one of the most important members of this family, with water and HgCl2 as the oxidation agents, was studied by fluorescence spectroscopy and mass spectrometry in order to get deeper insight into the kinetics and mechanistic details of this complex reaction. The reactions of 1,5-ICAN with water and HgCl2 were performed in various water/co-solvent mixtures of different compositions. The co-solvents used in this study were both aprotic solvents including tetrahydrofuran, acetonitrile and N,N-dimethylformamide and protic solvents, such as ethanol and 2-propanol. It was found that in aprotic solvents the conversion of the isocyano group to amino moiety takes place, while in protic solvents the corresponding carbamate (urethane) group is formed in addition to the amino moiety. The variation of the resulting fluorescence intensities versus time curves were described using an irreversible, consecutive reaction model, in which the formation of isocyanate and carbamic acid intermediates, as well as diamino and carbamate (in the case of protic solvents) products were assumed. The formation of these intermediates and products was unambiguously confirmed by mass spectrometric measurements. Furthermore, by fitting the model to the experimental fluorescence versus time curves, the corresponding rate coefficients were determined. It was observed that the overall rate of transformation of the isocyano group to amino moiety increased with the water concentration and the polarity of the co-solvent. It was also supported that formation of diamino and carbamate derivatives in protic solvents takes place simultaneously and that the ratio of the amino to the carbamate function increased with the increasing water concentration. In addition, with an extension, the model presented herein proved to be capable of describing the kinetics of the transformation of 1,5-diisocyanonaphthalene (1,5-DIN) into 1,5-diaminonaphthalene (1,5-DAN) in the mixtures of water/aprotic solvents.
Assuntos
Aminas/química , Cianetos/química , Água/química , Corantes/química , Íons/química , Cinética , Espectrometria de Massas , Mercúrio/química , Solventes/química , Espectrometria de FluorescênciaRESUMO
: Multiple drug resistant fungi pose a serious threat to human health, therefore the development of completely new antimycotics is of paramount importance. The in vitro antifungal activity of the original, 1-amino-5-isocyanonaphthalenes (ICANs) was evaluated against reference strains of clinically important Candida species. Structure-activity studies revealed that the naphthalene core and the isocyano- together with the amino moieties are all necessary to exert antifungal activity. 1,1-N-dimethylamino-5-isocyanonaphthalene (DIMICAN), the most promising candidate, was tested further in vitro against clinical isolates of Candida species, yielding a minimum inhibitory concentration (MIC) of 0.04-1.25 µg/mL. DIMICAN was found to be effective against intrinsically fluconazole resistant Candida krusei isolates, too. In vivo experiments were performed in a severly neutropenic murine model inoculated with a clinical strain of Candida albicans. Daily administration of 5 mg/kg DIMICAN intraperitoneally resulted in 80% survival even at day 13, whereas 100% of the control group died within six days. Based on these results, ICANs may become an effective clinical lead compound family against fungal pathogens.
Assuntos
Antifúngicos/farmacologia , Naftalenos/farmacologia , Animais , Antifúngicos/química , Antifúngicos/uso terapêutico , Candida albicans/efeitos dos fármacos , Candida albicans/isolamento & purificação , Candidíase/tratamento farmacológico , Candidíase/microbiologia , Linhagem Celular , Modelos Animais de Doenças , Feminino , Humanos , Hifas/efeitos dos fármacos , Hifas/crescimento & desenvolvimento , Camundongos Endogâmicos BALB C , Testes de Sensibilidade Microbiana , Naftalenos/química , Naftalenos/uso terapêutico , Relação Estrutura-AtividadeRESUMO
Data processing and visualization methods have an important role in the mass spectrometric study of crude oils and other natural samples. The recently invented data mining procedure, Mass-Remainder Analysis (MARA), was further developed for use in petroleomics. MARA is based on the calculation of the remainder after dividing by the exact mass of a base unit, in petroleomics by the mass of the CH2 group. The two key steps in the MARA algorithm are the separation of the monoisotopic peaks from the other isotopic peaks and the subsequent intensity correction. The effectiveness of our MARA method was demonstrated on the analysis of lubricating mineral oil and crude oil samples by ultra-high-resolution Fourier transform ion cyclotron resonance mass spectrometry experiments. MARA is able to handle a huge portion of the overlapped peaks even in a moderate resolution mass spectrum. With use of MARA, effective chemical composition assignment and visual representation were achieved for complex mass spectra recorded by a time-of-flight analyzer with a limited resolution of 40â¯000 at m/ z 400. In the absence of an ultra-high-resolution mass analyzer, MARA can provide a closer look on the mass spectral peaks, like a digital zoom in a simple camera.
Assuntos
Petróleo/análise , Espectrometria de Massas por Ionização por Electrospray/métodosRESUMO
The properties of 1,4-isocyanoaminonaphthalene (1,4-ICAN) and 2,6-isocyanoaminonaphthalene (2,6-ICAN) isomers are discussed in comparison with those of 1,5-isocyanoaminonaphthalene (1,5-ICAN), which exhibits a large positive solvatochromic shift similar to that of Prodan. In these isocyanoaminonaphthalene derivatives, the isocyano and the amine group serve as the donor and acceptor moieties, respectively. It was found that the positions of the donor and the acceptor groups in these naphthalene derivatives greatly influence the Stokes and solvatochromic shifts, which decrease in the following order: 1,5-ICAN > 2,6-ICAN > 1,4-ICAN. According to high-level quantum chemical calculations, this order is well correlated with the charge transfer character of these compounds upon excitation. Furthermore, unlike 1,5-ICAN, the 1,4-ICAN and 2,6-ICAN isomers showed relatively high quantum yields in water, that were determined to be 0.62 and 0.21, respectively. In addition, time-resolved fluorescence experiments revealed that both the radiative and non-radiative decay rates for these three ICAN isomers varied unusually with the solvent polarity parameter ET(30). The explanations of the influence of the solvent polarity on the resulting steady-state and time-resolved fluorescence emission spectra are also discussed.
Assuntos
Elétrons , Corantes Fluorescentes/química , Naftalenos/química , Nitrilas/química , Solventes/química , Isomerismo , Modelos Moleculares , Espectrometria de Fluorescência , Eletricidade Estática , Fatores de TempoRESUMO
The complexation between hexadecyl- and dodecyltrimethylammonium bromides (CTAB and DTAB) with sodium poly[(vinyl alcohol)-co-(vinyl sulfate)] (PVAS) copolymer of low charge density has been investigated using pyrene fluorescence spectroscopy, electrophoretic mobility, turbidity, and dynamic light scattering measurements. The results indicate that the binding of the cationic surfactant occurs in three steps. At low surfactant concentrations, the cationic amphiphile binds to the vinyl sulfate groups. Above charge neutralization, surfactant binding may occur on the surface of the hydrophobic vinyl sulfate/CnTAB nanoassemblies. At even higher concentrations, the surfactant binds on the nonionic vinyl alcohol units of the polyion which reswells the PVAS/CnTAB complexes and makes them highly soluble in water. In earlier studies on oppositely charged ionic surfactants and homopolyelectrolytes the impact of mixing protocols was found remarkable, especially at surfactant excess, where these systems can be trapped in the charge stabilized colloidal dispersion state. In contrast, in the case of PVAS/CnTAB mixtures the effect of mixing is less pronounced and diminishes with increasing ionic strength or decreasing alkyl chain length of the surfactant. These findings are rationalized by taking into account the different binding mechanism of surfactants on oppositely charged homopolyelectrolytes and double hydrophilic copolymers.
RESUMO
Measurement of equilibrium mass fraction of a surfactant as a function of the sorbent mass fraction was performed on gel sorbent-solution systems in order to determine binding isotherms and to calculate fundamental characteristics of the solvation layer. With application of this new method, it was possible to calculate specific solvation/sorption capacity and absolute average local composition of the solvation layer. It has been pointed out by systematic variation of the composition (hydrophobicity) and degree of cross-linking of the gel sorbents that the ratio of components in the solvation layer can be constant in a given range of equilibrium mass fraction of the sodium dodecyl sulfate (SDS) and that the specific solvation/sorption capacity of gel sorbents can be much greater than that of activated carbon type adsorbents. On the basis of a mixed sorbent model, it turned out from calculations that there is no preferential binding of SDS close to the chemical cross-links and that the surfactant molecules prefer vinyl acetate groups as binding sites. The density of cross-links regulates the aggregation number of the bound surfactant as well. For loose gels, both binding isotherms and swelling curves show that the surfactant-polymer interaction is a strongly cooperative process. The result of these experiments may influence the general concept of solvation/sorption isotherms and all related phenomena.
RESUMO
Mono- and dialkylated derivatives of 1-amino-5-isocyanonaphthalene (ICAN) were studied as new members of a multifunctional, easy-to-prepare fluorophore family, which showed excellent solvatochromic properties. The monoallyl derivative and the starting ICAN exhibited strong fluorescence quenching in the presence of small amounts of pyridine. The formation of a hydrogen-bonded ground-state pyridine complex was detected; however, analysis of quantum chemical calculations suggested the presence of an additional π-stacked pyridine complex. The Stern-Volmer plot of the quenching process exhibited a downward curvature and after reaching a minimum the fluorescence intensity increased back to a significant level at high pyridine concentrations. Significant fluorescence was observed even in pure pyridine. A new mechanism and a simple mathematical equation were derived to explain the downward curvature and the remaining fluorescence by the formation of a fluorescent π-stacked complex.
Assuntos
Corantes Fluorescentes/química , Naftalenos/química , Piridinas/química , Solventes/química , Alquilação , Ligação de Hidrogênio , Teoria Quântica , Espectrometria de FluorescênciaRESUMO
A new model, based on the presence of the excited state iminium ion (Ar = NH2+), is proposed to interpret the solvatochromic behavior of symmetric 1,5- and 1,8-diaminonaphtahelenes (DANs) in aprotic to protic media. The importance of using explicit solvent models during DFT calculations in protic solvents to find the proper excited structure for symmetric molecules is also highlighted.
RESUMO
The 2,4-toluenediamine (TDA) is one of the most important chemicals in the polyurethane industry, produced by the catalytic hydrogenation of 2,4-dinitrotoluene (DNT). The development of novel catalysts that can be easily recovered from the reaction mixture is of paramount importance. In our work, a NiFe2O4/N-BCNT supported magnetic catalyst was prepared by a modified coprecipitation method. The catalyst support alone also showed activity in the synthesis of TDA. Platinum nanoparticles were deposited on the catalyst support surface by a fast, relatively simple, and efficient sonochemical method, resulting in a readily applicable catalytically active system. The prepared catalyst exhibited high activity in hydrogenation tests, which was proved by the exceptionally high DNT conversion (100% for 120 min at 333 K) and TDA yield (99%). Furthermore, the magnetic catalyst can be easily recovered from the reaction medium by the action of an external magnetic field, which can greatly reduce catalyst loss during separation.
RESUMO
As the recent outbreak of coronavirus disease 2019 (COVID-19) has shown, viral infections are prone to secondary complications like invasive aspergillosis with a high mortality rate, and therefore the development of novel, effective antifungals is of paramount importance. We have previously demonstrated that 1-amino-5-isocyanonaphthalene (ICAN) derivatives are promising original drug candidates against Candida strains (Patent pending), even against fluconazole resistant C. albicans. Consequently, in this study ICANs were tested on Aspergillus fumigatus, an opportunistic pathogen, which is the leading cause of invasive and systematic pulmonary aspergillosis in immunosuppressed, transplanted and cancer- or COVID-19 treated patients. We have tested several N-alkylated ICANs, a well as 1,5-naphthalene-diisocyanide (DIN) with the microdilution method against Aspergillus fumigatus strains. The results revealed that the diisocyanide (DIN) was the most effective with a minimum inhibitory concentration (MIC) value as low as 0.6 µg mL-1 (3.4 µM); however, its practical applicability is limited by its poor water solubility, which needs to be overcome by proper formulation. The other alkylated derivatives also have in vitro and in vivo anti-Aspergillus fumigatus effects. For animal experiments the second most effective derivative 1-N, N-dimethylamino-5-isocyanonaphthalene (DIMICAN, MIC: 7-8 µg mL-1, 36-41 µM) was selected, toxicity tests were made with mice, and then the antifungal effect of DIMICAN was tested in a neutropenic aspergillosis murine model. Compared to amphotericin B (AMB), a well-known antifungal, the antifungal effect of DIMICAN in vivo turned out to be much better (40% vs. 90% survival after eight days), indicating its potential as a clinical drug candidate.