Automatic exposure compensation in intraoral digital radiography: effect on the gray values of dental tissues.

BACKGROUND: This study aimed to investigate the effect of automatic exposure compensation (AEC) of intraoral radiographic systems on the gray values of dental tissues in images acquired with or without high-density material in the exposed region using different exposure times and kilovoltages. The influence of the distance of the high-density material was also investigated. METHODS: Radiographs from the molar region of two mandibles were obtained using the RVG 6100 and the Express systems, operating at 60 and 70 kV and 0.06, 0.10, and 0.16 s. Subsequently, a titanium implant was inserted in the premolar's socket and other images were acquired. Using the ImageJ software, two regions of interest were determined on the enamel, coronary dentine, root dentine, and pulp of the first and second molars to obtain their gray values. RESULTS: In the RVG 6100, the implant did not affect the gray values (p > 0.05); the increase in kV decreased it in all tissues (p < 0.05), and the exposure time affected only the root dentine and pulp. In the Express, only enamel and coronary dentine values changed (p < 0.05), decreasing with the implant presence and/or with the increase in exposure factors. The distance of the implant did not affect the results (p > 0.05). CONCLUSIONS: AEC's performance varies between the radiographic systems. Its effect on the gray values depends not only on the presence or absence of high-density material but also on the kV and exposure time used.

The impact of digital filters on the diagnosis of simulated root resorptions in digital radiographic systems.

OBJECTIVES: To evaluate the influence of digital filters of intraoral radiographic systems on the diagnosis of simulated internal and external root resorptions and image quality. MATERIALS AND METHODS: Internal root resorption (IRR) and external root resorption (ERR) were simulated in 34 teeth. For image acquisition, two radiographic systems were used: Digora Toto and VistaScan. All filters available in these systems were applied. Three observers scored the detection of root resorptions in a 5-point scale. The noise and the contrast-to-noise ratio (CNR) were calculated. The area under ROC curve, sensitivity, specificity, and accuracy were obtained. One-way ANOVA with Tukey's post hoc tests compared the diagnostic values, noise, and CNR between the filters (α = 0.05). RESULTS: For ERR, there were no significant differences in diagnostic values between the filters tested for both systems. For IRR, Original and Noise Reduction filters presented higher sensitivity than the Sharpen2 filter for images from Digora Toto, with no differences between the other groups. For VistaScan, there were no significant differences of diagnostic values between the groups studied. Noise values differed among the filters of both systems. The CNR of the filters differed only for the bone region for Digora Toto, while for VistaScan, both tooth and bone regions differed. CONCLUSIONS: Despite promoting changes in pixel intensities and affecting the noise level of the radiographic images, the digital filters of Digora Toto and VistaScan systems do not affect the diagnosis of internal or external root resorptions. CLINICAL RELEVANCE: Digital filters are common tools in digital radiographic systems and may be used by the professional without impairment in root resorptions diagnosis.

Tomographic evaluation of the effect of simvastatin topical use on alveolar bone microarchitecture, pain and swelling after mandibular third molar extraction: a randomized controlled trial.

OBJECTIVES: To evaluate the effect of a collagen sponge containing simvastatin on socket healing in terms of bone microarchitecture through tomographic analysis, pain, and swelling after impacted third molar extraction. MATERIALS AND METHODS: In this single-blind, split-mouth, randomized clinical trial, 29 patients undergoing impacted third molar extraction were allocated into two groups: (i) test group, a collagen sponge containing simvastatin was inserted within the sockets; and (ii) control group, in which sockets retained the clot. Bone volume (BV), bone volume fraction (BV/TV), trabecular thickness (Tb.Th), trabecular spacing (Tb.Sp), and gray scale were evaluated using cone beam computed tomography (CBCT) acquired immediately postoperative and 3 months after surgery. Pain, swelling, and wound healing were evaluated using the 10-point visual analogue scale, three extra-oral reference measurements, and the Landry index. RESULTS: In total, 22 participants remained in the study; no loss-to-follow-up was related to the intervention. BV and BV/TV were significantly higher at 3 months postoperatively in the test group compared with the control group and were correlated with greater bone trabeculation. Pain, edema, and the Landry index revealed a greater inflammatory response in the test group during early repair. Simvastatin contributed to bone healing, with no adverse effects or postoperative complications. CONCLUSIONS: The absorbable collagen sponge containing simvastatin improved BV, BV/TV, and trabecular bone, indicating the potential of this drug to induce the formation of autogenous bone. CLINICAL RELEVANCE: Intraosseous statins represent a promising, low-cost, and easy-to-use alternative for alveolar ridge preservation and bone regeneration. TRIAL REGISTRATION: Brazilian Registry of Clinical Trials (REBEC), No. RBR-523N7R.

Do the number of basis images and metal artifact reduction affect the production of artifacts near and far from zirconium dental implants in CBCT?

OBJECTIVES: This study aimed to evaluate the influence of the number of basis images and the metal artifact reduction (MAR) tool on the production of artifacts near and far from a zirconium implant in cone-beam computed tomography (CBCT). MATERIALS AND METHODS: CBCT scans of a mandible were acquired before and after insertion of an implant, using 450 and 720 basis images, with and without MAR activation. The mean and standard deviation (SD) of the gray values of the regions of interest (ROIs) located on the cortices adjacent to the implant and at different distances from it (in the soft tissue) were calculated. The mean of the gray values was used to calculate the absolute contrast difference (ACD) between the control and implant scans. RESULTS: In general, the number of basis images did not affect the SD and the ACD values of the buccal and lingual ROIs (p > 0.05). The implant increased the SD in the lingual cortical plate (p < 0.05). In this case, MAR activation decreased SD (p < 0.05). All ROIs located at different distances from the implant showed higher SD on scans acquired with 450 basis images (p < 0.05), regardless of MAR condition. CONCLUSIONS: A higher number of basis images reduces the magnitude of artifacts but does not influence the image quality in bone cortical plates. MAR improves the image in the areas most affected by artifacts. CLINICAL RELEVANCE: The number of basis images is known as a factor capable of influencing the image quality and radiation dose for the patient. Therefore, it is important to investigate its effect on the expression of artifacts in the CBCT images.

Does the administration of meloxicam before head and neck radiotherapy reduce the risk of mandibular osteoradionecrosis? An animal model study.

OBJECTIVE: To assess whether the administration of meloxicam before head and neck radiotherapy reduces the risk of mandibular osteoradionecrosis in rats. MATERIAL AND METHODS: Sixty male Wistar rats were randomly divided into 6 groups (n = 10) according to the meloxicam administration and radiation therapy: control (C), irradiated (I), single dose of meloxicam (M1), single dose of meloxicam and irradiated (M1I), triple dose of meloxicam (M3), triple dose of meloxicam and irradiated (M3I). Meloxicam was administrated (20 mg/kg per dose) 1 h before the radiation therapy (single dose of 20 Gy) and 24 h and 48 h after the radiation therapy for groups with two additional doses. Ten days after the radiation therapy, the three right mandibular molars were extracted from all rats, who were euthanatized after 21 or 35 days (n = 5 per group). The mandibles were assessed by macroscopic evaluation and micro-CT analysis. RESULTS: The right hemimandibles of the irradiated groups revealed macroscopic signs of osteoradionecrosis, and those of the non-irradiated groups revealed complete gingival healing. A significant delay in alveolar socket healing in all irradiated groups was observed in the micro-CT assessment regardless meloxicam treatment. CONCLUSION: The administration of meloxicam before head and neck radiotherapy does not reduce the risk of mandibular osteoradionecrosis when associated to dental extractions. CLINICAL RELEVANCE: Since meloxicam has been shown to be a potential radiation-protective agent, and osteoradionecrosis physiopathology is believed to be related to an inflammatory process, possible interactions are relevant to be investigated.

Effect of resveratrol on the progression of experimental periodontitis in an ovariectomized rat model of osteoporosis: Morphometric, immune-enzymatic, and gene expression analysis.

OBJECTIVE: This study aimed to determine the role of resveratrol (RESV) on the progression of experimental periodontitis (EP) in ovariectomy rats (OVT). BACKGROUND: Estrogen deficiency is the main cause of osteoporosis and is related to higher periodontal attachment loss and reduction of alveolar bone. Zoledronate (ZLD) is an antiresorptive drug used to control osteoporosis but can lead to osteonecrosis of the jaw. RESV, a natural product, can reduce bone loss and control and prevent osteoporosis. Thus, this study aimed at investigating the effect of RESV on the progression of EP in estrogen-deficient rats. MATERIAL AND METHODS: The animals were subjected to the OVT or sham surgery to induce estrogen-deficiency and then were divided into the groups: OVT + RESV (n: 10); OVT + PLAC (n: 10): OVT + placebo; OVT + ZLD +PLA (n: 10); OVT + RESV +ZLD (n: 10): OVT + RESV and ZLD; SHAM (n: 10): non-ovariectomized animals + placebo. To induce estrogen deficiency, the rats were subjected to ovariectomy. Experimental periodontitis was induced by the placement of a ligature at the second maxillary molars. Daily administration of the placebo solution, resveratrol (10 mg/kg), and ZLD (0.1 mg/kg) was carried out for a period 42 days prior to initiation of EP, and then for another 28 days following ligature placement. After euthanasia, the specimens were processed for micro-CT and morphometric analysis of bone loss (linear measurement), and the gingival tissue surrounding the maxillary second molar was collected for the quantification of inflammatory markers using Luminex/MAGPix, of oxidative stress markers using ELISA assay, and gene expression analysis of bone markers, by real-time PCR. RESULTS: Morphometric and micro-CT analysis showed higher bone loss and lower bone density, respectively, in OVT + PLAC when compared to the other groups (P < .05). ZLD treated groups had lower alveolar bone loss, as well as, higher density and percentage of bone volume, when compared to OVT + RESV and SHAM + PLAC groups (P < .05). IL-4 levels were significantly lower in the OVT + PLAC group versus OVT + ZLD +RESV and SHAM + PLAC (P < .05). NADPH oxidase (nicotinamide adenine dinucleotide phosphate oxidase) levels were significantly lower OVT + RESV group when compared to OVT + PLAC (P < .05). OPG mRNA levels were lower in OVT + PLAC compared with the SHAM + PLAC group (P < .05). CONCLUSION: It can be concluded that resveratrol modulated alveolar bone loss during experimental periodontitis progression in estrogen-deficient rats by downregulating NADPH oxidase levels.

A modified protocol of mandibular osteoradionecrosis induction in rats with external beam radiation therapy.

OBJECTIVE: To propose a modified protocol of mandibular osteoradionecrosis induction in rats with external beam radiation therapy. MATERIAL AND METHODS: A total of 45 male Wistar rats were used in this study. Firstly, 25 rats were divided into 5 groups (n = 5) according to the radiation dose protocol: without irradiation and irradiated with 15 Gy, 20 Gy, 25 Gy, or 30 Gy using a linear accelerator. Secondly, 15 other rats were divided into 3 groups (n = 5) according to the time of extraction of the three right mandibular molars: 7, 10, or 14 days after irradiation of 20 Gy. Lastly, dental extractions were performed in 5 other rats without irradiation (C-E10) for comparison with those of the group of dental extractions 10 days after irradiation (I-E10). RESULTS: The irradiated animals survived throughout the study period only at single doses of 15 Gy and 20 Gy. The suitable time for dental extractions after irradiation to induce mandibular osteoradionecrosis was defined as 10 days. Macroscopic evaluation of the right hemimandibles showed presence of osteoradionecrosis in I-E10 group and complete gingival healing in C-E10 group. CONCLUSION: A single radiation dose of 20 Gy focused on head and neck region combined with the extraction of the three mandibular molars 10 days after irradiation constitutes a feasible protocol of mandibular osteoradionecrosis induction in rats with external beam radiation therapy. CLINICAL RELEVANCE: Establishing a solid and widely available protocol of mandibular osteoradionecrosis induction is essential in the search for methods to prevent this complex disease.

Effect of brightness and contrast variation for detectability of root resorption lesions in digital intraoral radiographs.

OBJECTIVES: To evaluate the performance of periapical radiography assessed under different radiographic brightness and contrast variations in the detection of simulated internal (IRR) and external (ERR) root resorption lesions. Additionally, observers' preferences related to image quality for these diagnostic tasks were evaluated. METHODS: Thirty single-root teeth were divided into two groups (n = 15): IRR, in which lesions were simulated using mechanical and biochemical processes; and ERR, in which cavities standardized with drills of different sizes were performed on the root surfaces. Digital radiographs were obtained and subsequently adjusted in 4 additional combinations, resulting in 5 brightness/contrast variations (V1-V5). Five radiologists evaluated the radiographs. The observers' preference on the image quality was also recorded. RESULTS: For both conditions, there were no differences in the accuracy and specificity between the five brightness/contrast variations (p > 0.05), but the sensitivity for ERR was significantly lower in V4 (+ 15% brightness/-15% contrast) in the large size (p < 0.05). The observers classified V2 (- 15% brightness/+15% contrast) as the "best" image quality for IRR and ERR evaluation. CONCLUSIONS: For IRR and ERR lesions, brightness and contrast variation does not affect the diagnostic performance of digital intraoral radiography within the tested range. The observers prefer images with a reasonable decrease in brightness and increase in contrast. CLINICAL RELEVANCE: Brightness and contrast enhancement tools are commonly applied in digital radiographic assessment. The use of these tools for detection of root resorptions can be applied according to the observer preference without influence on diagnostic accuracy.

Juxta-Apical Radiolucency: Prevalence, Characterization, and Association With the Third Molar Status.

PURPOSE: This study aimed to investigate the prevalence of juxta-apical radiolucency (JAR), assessing its association with third molar status and describing its radiologic features through panoramic radiography. MATERIALS AND METHODS: We evaluated 1,050 radiographs (1,830 third molars) for the presence of JAR. The JAR and control groups were classified according to the third molar's angulation, impaction, and root development. The presence of radiographic signs of proximity between the mandibular canal and third molar and the imaging features of JAR also were recorded. RESULTS: JAR was identified in 116 patients (11%) and 130 third molars (7.1%), being significantly associated with female patients and with the second and third decades of life. There also was an association with teeth with a vertical angulation and complete root formation. Radiographic signs of proximity to the mandibular canal were absent in 66.2% of JAR cases. In most cases, there was lamina dura in the juxta-apical area that appeared to overlap the mandibular canal and to have a cortical outline. CONCLUSIONS: JAR is not a rare imaging finding. Given its possible relationship with nerve injuries and its differential diagnostic possibilities, knowing the characteristics of JAR is important to assist professionals in treatment planning and making the correct diagnosis.

Prevalence of technical errors and periapical lesions in a sample of endodontically treated teeth: a CBCT analysis.

OBJECTIVES: The aims of this study are to identify the most frequent technical errors in endodontically treated teeth and to determine which root canals were most often associated with those errors, as well as to relate endodontic technical errors and the presence of coronal restorations with periapical status by means of cone-beam computed tomography images. METHODS: Six hundred eighteen endodontically treated teeth (1146 root canals) were evaluated for the quality of their endodontic treatment and for the presence of coronal restorations and periapical lesions. Each root canal was classified according to dental groups, and the endodontic technical errors were recorded. Chi-square's test and descriptive analyses were performed. RESULTS: Six hundred eighty root canals (59.3%) had periapical lesions. Maxillary molars and anterior teeth showed higher prevalence of periapical lesions (p < 0.05). Endodontic treatment quality and coronal restoration were associated with periapical status (p < 0.05). Underfilling was the most frequent technical error in all root canals, except for the second mesiobuccal root canal of maxillary molars and the distobuccal root canal of mandibular molars, which were non-filled in 78.4 and 30% of the cases, respectively. CONCLUSIONS: There is a high prevalence of apical radiolucencies, which increased in the presence of poor coronal restorations, endodontic technical errors, and when both conditions were concomitant. Underfilling was the most frequent technical error, followed by non-homogeneous and non-filled canals. CLINICAL RELEVANCE: Evaluation of endodontic treatment quality that considers every single root canal aims on warning dental practitioners of the prevalence of technical errors that could be avoided with careful treatment planning and execution.

Diagnostic accuracy of phosphor plate systems and conventional radiography in the detection of simulated internal root resorption.

OBJECTIVE: To evaluate the performance of conventional radiography and photostimulable phosphor (PSP) plate in the detection of simulated internal root resorption (IRR) lesions in early stages. MATERIALS AND METHODS: Twenty single-rooted teeth were X-rayed before and after having a simulated IRR early lesion. Three imaging systems were used: Kodak InSight dental film and two PSPs digital systems, Digora Optime and VistaScan. The digital images were displayed on a 20.1″ LCD monitor using the native software of each system, and the conventional radiographs were evaluated on a masked light box. Two radiologists were asked to indicate the presence or absence of IRR and, after two weeks, all images were re-evaluated. Cohen's kappa coefficient was calculated to assess intra- and interobserver agreement. The three imaging systems were compared using the Kruskal-Wallis test. RESULTS: For interexaminer agreement, overall kappa values were 0.70, 0.65 and 0.70 for conventional film, Digora Optima and VistaScan, respectively. Both the conventional and digital radiography presented low sensitivity, specificity, accuracy, positive and negative predictive values with no significant difference between imaging systems (p = .0725). CONCLUSIONS: The performance of conventional and PSP was similar in the detection of simulated IRR lesions in early stages with low accuracy.

Potential impact of metal crowns at varying distances from a carious lesion on its detection on cone-beam computed tomography scans with several protocols.

Purpose: This study evaluated the impact of artifacts generated by metal crowns on the detection of proximal caries lesions in teeth at various distances using cone-beam computed tomography (CBCT). Additionally, the diagnostic impacts of tube current and metal artifact reduction (MAR) were investigated. Materials and Methods: Thirty teeth were arranged within 10 phantoms, each containing 1 first premolar, 1 second premolar, and 1 second molar. A sound first molar (for the control group) or a tooth with a metal crown was placed. Of the 60 proximal surfaces evaluated, 15 were sound and 45 exhibited enamel caries. CBCT scans were acquired using an OP300 Maxio unit (Instrumentarium, Tuusula, Finland), while varying the tube current (4, 8, or 12.5 mA) and enabling or disabling MAR. Five observers assessed mesial and distal surfaces using a 5-point scale. Multi-way analysis of variance was employed for data comparison, with P<0.05 indicating statistical significance. Results: The area under the curve (AUC) varied from 0.40 to 0.60 (sensitivity: 0.28-0.45, specificity: 0.44-0.80). The diagnostic accuracy was not significantly affected by the presence of a metal crown, milliamperage, or MAR (P>0.05). However, the overall AUC and specificity were significantly lower for surfaces near a crown (P<0.05). Conclusion: CBCT-based caries detection was not influenced by the presence of a metal crown, variations in milliamperage, or MAR activation. However, the diagnostic accuracy was low and was further diminished for surfaces near a crown. Consequently, CBCT is not recommended for the detection of incipient caries lesions.

Automatic exposure compensation of digital radiographic technologies does not affect alveolar bone-level measurement.

OBJECTIVE: To evaluate whether the automatic exposure compensation in the presence of high-density materials can affect the measurement of alveolar bone level. METHODS: Thirty regions of seven dry skulls and six mandibles were radiographed with and without a high-density material, using two digital radiographic technologies: photostimulable phosphor plate (PSP, Digora Optime) and sensor (CMOS, Digora Toto), totaling 120 images. The distances from the cement-enamel junction to the alveolar bone crest were measured using cone-beam computed tomography (CBCT) images to represent the reference standard. The same measurements of alveolar bone level and the average of the pixel values of the image were evaluated on the radiographs. Paired t test compared the average pixel values and alveolar bone-level measurements between images with and without high-density material. One-way analysis of variance compared the difference between radiographic and CBCT measurements (α = 0.05). RESULTS: The high-density material reduced the pixel values in PSP (p = 0.002) and CMOS (p < 0.001) technologies, demonstrating the AEC functioning in both technologies. There was no difference in bone-level measurements between the images without and with the high-density material for both technologies (p ≥ 0.091), or between the tomographic and radiographic measurements (p ≥ 0.319). CONCLUSION: In the presence of high-density material, the automatic exposure compensation reduces the average pixel values of the images (i.e., images get darker), but does not influence the radiographic measurements of alveolar bone level.

Influence of artefacts generated by titanium and zirconium implants in the study of trabecular bone architecture in cone-beam CT images.

OBJECTIVES: To evaluate the influence of artefacts generated by titanium and zirconium implants on trabecular bone architecture assessment through cone-beam CT (CBCT). The influence of kilovoltage (kVp) and metal artefact reduction (MAR) in such analysis was also assessed. METHODS: CBCT scans were obtained with Picasso Trio with or without a titanium or zirconium implants in a posterior region of a mandible using 70, 80 or 90 kVp, with or without MAR. The other acquisition settings were constant: field of view 8 × 5 cm, voxel size 0.2 mm, 5 mA, 24 s and 720 frames. Two volumes of interest (VOIs) were determined comprising trabecular bone mesial and distal to the implant area. The following morphometric parameters were measured: connectivity density (Conn. Dn.), fractal dimension (FD), bone volume fraction (BV/TV), bone surface density (BS/TV), trabecular thickness (Tb. Th.), and trabecular spacing (Tb. Sp.), and compared by multiway ANOVA (α = 0.05). RESULTS: For Conn. Dn. and FD, with MAR, the zirconium group showed values significantly lower than the other groups (p < 0.05). For BV/TV, BS/TV, Tb. Th. and Tb. Sp., the zirconium group showed the highest values, regardless of MAR condition (p < 0.05). MAR increased BS/TV and Tb. Th. values, and decreased FD values for zirconium group. In general, the kVp level did not influence trabecular morphometric parameters. CONCLUSION: The assessment of the trabecular bone architecture was mainly influenced by the expression of the artefacts generated by zirconium implants. MAR decreased the FD and increased the BS/TV and Tb.Th. values regardless of the kVp level.

Influence of the Milliamperage and Artifact Reduction Tool on the CBCT-Based Diagnosis of Buccal and Lingual Peri-implant Dehiscences: Comparison Between Two Types of Implants.

PURPOSE: To evaluate the influence of the milliamperage and artifact reduction (AR) tool on the diagnosis of buccal and lingual peri-implant dehiscences related to titanium-zirconia (Ti-Zr) and zirconia (Zr) implants using CBCT images. MATERIALS AND METHODS: Ti-Zr and Zr implants were alternately inserted in 20 sites in the posterior region of three human mandibles that presented intact cortical (control) bones or simulated buccal and/or lingual peri-implant dehiscences. CBCT images were acquired with an OP300 Maxio unit, varied milliamperage (5 and 8 mA), and the use of AR tool. Three oral radiologists assessed the presence of dehiscences using a 5-point scale. The area under the receiver operator characteristic curve (Az), sensitivity, and specificity of each group (control and dehiscence) were obtained and compared using multiway ANOVA (α = .05). RESULTS: The milliamperage and the AR tool did not influence the diagnosis of dehiscences, and there were no differences between the buccal and lingual cortices (P > .05). However, Zr implants showed a higher sensitivity (0.67 to 0.89) and lower specificity (0.26 to 0.44) than Ti-Zr implants (0.19 to 0.44 and 0.93 to 1.00, respectively; P < .05). Az values did not differ between the implant types (P > .05). CONCLUSIONS: Dehiscences were more detectable when related to Zr implants, while the absence of dehiscences was more correctly visualized adjacent to Ti-Zr implants. The use of varied milliamperages and the AR tool did not affect the diagnosis of peri-implant dehiscences, regardless of the involved cortical (buccal or lingual) bones.

Mapping of a multilayer panoramic radiography device.

OBJECTIVE: To map the shape, location, and thickness of the focal trough of a panoramic radiography device with a multilayer imaging program. METHODS: An acrylic plate (148 × 148 × 3 mm) containing 1156 holes distributed in a matrix of 34 × 34 rows was placed in the OP300 Maxio at the levels of the maxilla and mandible. 20 metal spheres (3.5 mm in diameter) were placed on the holes of the plate under 15 different arrangements and panoramic images were acquired for each arrangement at 66 kV, 8 mA, and an exposure time of 16 s. The resulting panoramic radiographs from the five image layers were exported, the horizontal and vertical dimensions of the metal spheres were measured in all images using the Image J software, and the magnification and distortion rates of the spheres were calculated. All metal spheres presenting a magnification rate lower than 30% in both vertical and horizontal dimensions and a distortion rate lower than 10% were considered to map the focal troughs of each of the five image layers. RESULTS: All panoramic image layers had a curved shape ranging from 39° to 51° for both dental arches and varied in position and thickness. The anterior region of maxilla was anteriorly displaced when compared to the anterior region of the mandible for all layers. Image layers are thicker at the level of the mandible than those at the level of the maxilla; also, inner layers were thinner and outer layers were thicker. CONCLUSION: All image layers in the studied panoramic radiography device had a curved shape and varied in position and thickness. The anterior region of maxilla was anteriorly displaced when compared to that of the mandible for all layers.

Identifying misconceptions about oral radiology and medicine among dental students.

PURPOSE/OBJECTIVES: Misconceptions are learning deficiencies that can lead to inappropriate clinical decision-making in dental practice. Although misconceptions are common among students, they are rarely analyzed in dental education. Thus, this study aimed to identify and analyze students' misconceptions about oral radiology and medicine at a Brazilian dental school. METHODS: Between October 2019 and March 2020, a self-administered anonymous questionnaire was distributed to dental students at the Federal University of Pernambuco, Brazil, which comprised multiple-choice questions about oral radiology and medicine. The questions were divided into two groups: 10 knowledge-based questions (less demand for reasoning) and five scenario-based questions (higher demand for reasoning). The students' responses were assessed for correctness (correct or incorrect) and confidence (sure or unsure), while misconceptions were identified when a student was sure of an incorrect response. Pearson's chi-square test was used to analyze the variables (α = 0.05). RESULTS: A total of 1380 responses were collected. Misconceptions represented 24.3% (n = 336) of the total responses and 56.8% of the incorrect responses. The mean misconceptions per student were 3.7 (range, 0-8). Students who chose incorrect answers tended to have higher confidence levels (p < 0.001). Moreover, misconceptions were more frequent for scenario-based questions (25.7%) than for knowledge-based questions (23.7%) (p = 0.000). CONCLUSION: A large number of misconceptions existed among participants. Our findings will aid educators and students in identifying misconceptions and planning measures to prevent and correct them.

Influence of kilovoltage-peak and the metal artifact reduction tool in cone-beam computed tomography on the detection of bone defects around titanium-zirconia and zirconia implants.

Purpose: The aim of this study was to assess the influence of kilovoltage-peak (kVp) and the metal artifact reduction (MAR) tool on the detection of buccal and lingual peri-implant dehiscence in the presence of titanium-zirconia (Ti-Zr) and zirconia (Zr) implants in cone-beam computed tomography (CBCT) images. Materials and Methods: Twenty implant sites were created in the posterior region of human mandibles, including control sites (without dehiscence) and experimental sites (with dehiscence). Individually, a Ti-Zr or Zr implant was placed in each implant site. CBCT scans were performed using a Picasso Trio device, with variation in the kVp setting (70 or 90 kVp) and whether the MAR tool was used. Three oral radiologists scored the detection of dehiscence using a 5-point scale. The area under the receiver operating characteristic (ROC) curve, sensitivity, and specificity were calculated and compared by multi-way analysis of variance (α=0.05). Results: The kVp, cortical plate involved (buccal or lingual cortices), and MAR did not influence any diagnostic values (P>0.05). The material of the implant did not influence the ROC curve values (P>0.05). In contrast, the sensitivity and specificity were statistically significantly influenced by the implant material (P<0.05) with Zr implants showing higher sensitivity values and lower specificity values than Ti-Zr implants. Conclusion: The detection of peri-implant dehiscence was not influenced by kVp, use of the MAR tool, or the cortical plate. Greater sensitivity and lower specificity were shown for the detection of peri-implant dehiscence in the presence of a Zr implant.

Radiographic diagnosis of proximal caries is not affected by exposure protocols and presence of high-density material on systems with automatic exposure compensation.

OBJECTIVES: To investigate the performance of radiographic systems with automatic exposure compensation (AEC) on the caries diagnosis in images acquired with different exposure parameters and in the presence of high-density material. Also, the image quality was assessed. METHODS: Forty posterior teeth (80 proximal surfaces) were radiographed using a phosphor plate and a CMOS system. Images were acquired with different exposure times (0.06, 0.10 and 0.16 s) and kilovoltages (60 and 70kVp), in the absence and presence of high-density material in the X-rayed region (control and high-density groups). Five radiologists assessed the caries using a 5-point scale. Diagnostic values were compared using two-way ANOVA. RESULTS: For both radiographic systems, there were no significant differences in the area under the ROC curve (0.60-0.73), sensitivity (0.79-0.87) and specificity (0.29-0.48) between the control and high-density groups, exposure times or kilovoltages (p > 0.05). For image quality, scores assigned to the control and high-density groups were similar in each exposure protocol in both systems. CONCLUSIONS: The presence of high-density material, exposure time and kilovoltage did not affect the caries diagnosis in any of the systems tested. It is recommended to use protocols with lower doses to reduce the patient's exposure.

Which factors related to apical radiolucency may influence its radiographic detection? A study using CBCT as reference standard.

OBJECTIVES: This study aimed to evaluate the detection rate of apical radiolucencies in 2-dimensional images using cone-beam computed tomography (CBCT) as the reference standard, and to determine which factors related to the apical radiolucencies and the teeth could influence its detection. MATERIALS AND METHODS: The sample consisted of exams of patients who had panoramic (PAN) and/or periapical (PERI) radiography and CBCT. The exams were assessed by 2 oral radiologists and divided into PAN+CBCT (227 teeth-285 roots) and PERI+CBCT (94 teeth-115 roots). Radiographic images were evaluated for the presence of apical radiolucency, while CBCT images were assessed for presence, size, location, and involvement of the cortical bone (thinning, expansion, and destruction). Diagnostic values were obtained for PERI and PAN. RESULTS: PERI and PAN presented high accuracy (0.83 and 0.77, respectively) and specificity (0.89 and 0.91, respectively), but low sensitivity, especially for PAN (0.40 vs. 0.65 of PERI). The size of the apical radiolucency was positively correlated with its detection in PERI and PAN (p < 0.001). For PAN, apical radiolucencies were 3.93 times more frequently detected when related to single-rooted teeth (p = 0.038). The other factors did not influence apical radiolucency detection (p > 0.05). CONCLUSIONS: PERI presents slightly better accuracy than PAN for the detection of apical radiolucency. The size is the only factor related to radiolucency that influences its detection, for both radiographic exams. For PAN, apical radiolucency is most often detected in single-rooted teeth.