Hole-transporting interlayers based on pyrazine-containing conjugated polymers for perovskite solar cells.

Hybrid organic-inorganic perovskite solar cells (PSCs) have drawn great attention in the past decade due to the rapid growth of their power conversion efficiency (PCE) and the advantage of their low-cost fabrication. The hole-transport materials (HTMs) play a crucial role in achieving high efficiency and operational stability of PSCs. In this work, we report the synthesis of two novel conjugated polymers by coupling of the alkylsilyl-substituted benzo[1,2-b:4,5-b']dithiophene unit with the thiophene-bridged pyrazine block and their investigation as dopant-free HTMs in n-i-p PSCs. The devices with polymer PBPyT-ex (poly[(4,8-bis(5-(triisopropylsilyl)thiophen-2-yl)-2,6-benzo[1,2-b:4,5-b']dithiophene)-alt-5,5'-(2,5-bis(4-(2-ethylhexyl)thiophen-2-yl)pyrazine)]) demonstrate PCEs up to 17.5%, outperforming the 14.9% efficiency of PSCs with PBPyT-in (poly[(4,8-bis(5-(triisopropylsilyl)thiophen-2-yl)-2,6-benzo[1,2-b:4,5-b']dithiophene)-alt-5,5'-(2,5-bis(3-(2-ethylhexyl)thiophen-2-yl)pyrazine)]), which is attributed to the difference in the quality of HTM films. The results obtained feature the combination of pyrazine, thiophene and benzodithiophene units as a successful example of polymeric HTM backbone design for PSCs with encouraging efficiency and high operational stability over 1500 h under continuous illumination.

Enhanced saturable absorption in the laser-treated free-standing carbon nanotube films.

We demonstrate an increase of optical transmittance and saturable absorption of laser-treated free-standing single-walled carbon nanotube (SWNT) films. The combined acid and low-power non-destructive laser treatment ensures an enhancement of linear transmittance across the visible range and double-digit increase of the saturable absorption of femtosecond laser radiation at 795 nm. The saturable absorption coefficient and the ratio of saturable to non-saturable losses increase by 26% and 35%, correspondingly, while the saturation intensity decreases by 20% because of the treatment. Our analysis indicates that with the performed treatment one can significantly improve the nonlinear optical properties of free-standing SWNT-based ultrafast saturable absorbers.

Fabrication and electrical study of large area free-standing membrane with embedded GaP NWs for flexible devices.

Flexible optoelectronic structures are required in a wide range of applications. Large scale modified silicone-embedded n-GaP nanowire arrays of a record 6 µm thin membranes were studied. A homogeneous silicone encapsulation was enabled by G-coating using a heavy-load centrifuge. The synthesized graft-copolymers of polydimethylsiloxane (PDMS) and polystyrene demonstrated two times lower adhesion to Si compared to standard PDMS, allowing 3 square inch area high quality silicone/nanowire membrane mechanical release, preserving the growth Si substrate for a further re-use after chemical cleaning. The 90% transparent single-walled carbon nanotubes electrical contacts to the embedded n-GaP nanowires demonstrated mechanical and electrical stability. The presented methods can be used for the fabrication of large scale flexible inorganic optoelectronic devices.

Terahertz-infrared electrodynamics of single-wall carbon nanotube films.

Broad-band (4-20 000 cm-1) spectra of real and imaginary conductance of a set of high-quality pristine and AuCl3-doped single-walled carbon nanotube (SWCNT) films with different transparency are systematically measured. It is shown that while the high-energy (≥1 eV) response is determined by well-known interband transitions, the lower-energy electrodynamic properties of the films are fully dominated by unbound charge carriers. Their main spectral effect is seen as the free-carrier Drude-type contribution. Partial localization of these carriers leads to a weak plasmon resonance around 100 cm-1. At the lowest frequencies, below 10 cm-1, a gap-like feature is detected whose origin is associated with the energy barrier experienced by the carriers at the intersections between SWCNTs. It is assumed that these three mechanisms are universal and determine the low-frequency terahertz-infrared electrodynamics of SWCNT wafer-scale films.

Carbon nanotube network varactor.

Microelectromechanical system (MEMS) varactors based on a freestanding layer of single-walled carbon nanotube (SWCNT) films were designed, fabricated and tested. The freestanding SWCNT film was employed as a movable upper patch in the parallel plate capacitor of the MEMS. The measurements of the SWCNT varactors show very high tunability, nearly 100%, of the capacitance with a low actuation voltage of 10 V. The functionality of the varactor is improved by implementing a flexible nanocellulose aerogel filling.