Tumor-targeting albumin nanoparticles as an efficacious drug delivery system and potential diagnostic tool in non-muscle-invasive bladder cancer therapy.

Current intravesical chemotherapy for non-muscle invasive bladder cancer (NMIBC) has limited efficacy due to loss of the instilled agent from urine voiding and the agent's lack of specificity for the tumors. We developed a nanocarrier (txCD47-HNP, ∼100 nm) based on human serum albumin conjugated with a peptide that targets the cluster of differentiation 47 receptor overexpressed on bladder cancer (BC) cells. The IC50 of gemcitabine elaidate (GEM) loaded in the txCD47-HNP was almost an order of magnitude lower than that of free GEM. In a mouse orthotopic BC model, GEM loaded in txCD47-HNP effectively reduced the tumor burden. Tumor cells in BC patients' urine can also be targeted by fluorescence-labeled txCD47-HNP resulting in >83 % of the cells exhibiting fluorescence. Thus, txCD47-HNP can potentially be a theranostic agent in NMIBC management by serving as a targeted drug delivery vehicle as well as an alternative to urine cytology.

Glycosylated phospholipid-coated upconversion nanoparticles for bioimaging of non-muscle invasive bladder cancers.

Detection of non-muscle invasive bladder cancer (NMIBC) is crucial to facilitate complete tumor resection, thus improving the survival rate as well as reducing the recurrence frequency and treatment expense. Fluorescence imaging cystoscopy is an effective method for the detection of NMIBC. However, its application is limited as the commonly applied fluorescent agents such as dyes and photosensitizers usually lack specific tumor accumulation and are vulnerable to photobleaching. Furthermore, the broad emission band of conventional fluorescent agents limits their imaging and detection efficacy. To overcome these limitations, upconversion nanoparticles (UCNPs) have been selected as the fluorescent agent, due to their resistance to photobleaching, less background auto-fluorescence, and narrow emission bands. In order to achieve active tumor targeting, the UCNPs are coated with a glycosylated phospholipid layer. The glycosylated phospholipid-coated UCNPs exhibited high selective accumulation in cancer cells over normal cells and enhanced the upconversion luminescence (UCL) (at 540 nm and 660 nm) from bladder cancer cells under 980 nm laser irradiation. Glycosylated phospholipid coating that promotes uptake of UCNPs by cancer cells, and UCL emitted from UCNPs under NIR (980 nm) laser irradiation for cancer cell imaging.

Dominant Albumin-Surface Interactions under Independent Control of Surface Charge and Wettability.

Understanding protein adsorption behaviors on solid surfaces constitutes an important step toward development of efficacious and biocompatible medical devices. Both surface charge and wettability have been shown to influence protein adsorption attributes, including kinetics, quantities, deformation, and reversibility. However, determining the dominant interaction in these surface-induced phenomena is challenging because of the complexity of inter-related mechanisms at the liquid/solid interface. Herein, we reveal the dominant interfacial forces in these essential protein adsorption attributes under the influence of a combination of surface charge and wettability, using quartz crystal microbalance with dissipation monitoring and atomic force microscopy-based force spectroscopy on a series of model surfaces. These surfaces were fabricated via layer-by-layer assembly, which allowed two-dimensional control of surface charge and wettability with minimal cross-parameter dependency. We focused on a soft globular protein, bovine serum albumin (BSA), which is prone to conformational changes during adsorption. The information obtained from the two techniques shows that both surface charge and hydrophobicity can increase the protein-surface interaction forces and the adsorbed amount. However, surface hydrophobicity triggered a greater extent of deformation in the adsorbed BSA molecules, leading to more dehydration, spreading, and resistance to elution by ionic strength changes regardless of the surface charge. The role played by the surface charge in the adsorbed protein conformation and extent of desorption induced by changes in the ionic strength is secondary to that of surface hydrophobicity. These findings advance the understanding of how surface chemistry and properties can be tailored for directing protein-substrate interactions.

Restriction of in vivo infection by antifouling coating on urinary catheter with controllable and sustained silver release: a proof of concept study.

BACKGROUND: Catheter Associated Urinary Tract Infections are among the most common urological infections world-wide. Bacterial biofilms and encrustation cause significant complications in patients with urinary catheters. The objective of the study is to demonstrate the efficacy and safety of an anti-microbial and anti-encrustation silver nanoparticle (AgNP) coating on silicone urinary catheter in two different animal models. METHODS: Antifouling coating (P3) was prepared with alternate layers of polydopamine and AgNP and an outermost antifouling layer. Sixteen C57BL/6 female mice and two female PWG Micropigs® were used to perform the experiments. In mice, a 5 mm long silicone catheter with or without P3 was transurethrally placed into the urinary bladder. Micropigs were transurethrally implanted - one with P3 silicone catheter and the other with commercially available silver coated silicone catheter. Both models were challenged with E. coli. Bacteriuria was evaluated routinely and upon end of study (2 weeks for mice, 3 weeks for micropigs), blood, catheters and bladders were harvested and analysed for bacterial colonization and encrustation as well as for toxicity. RESULTS: Lower bacterial colonization was seen on P3 catheters as well as in bladders of animals with P3 catheter. Bacteriuria was consistently less in mice with P3 catheter than with uncoated catheters. Encrustation was lower on P3 catheter and in bladder of micropig with P3 catheter. No significant toxicity of P3 was observed in mice or in micropig as compared to controls. The numbers were small in this proof of concept study and technical issues were noted especially with the porcine model. CONCLUSIONS: Antifouling P3 coating reduces bacterial colonization on catheter and in animal bladders without causing any considerable toxicity for 2 to 3 weeks. This novel coating could potentially reduce the complications of indwelling urethral catheters.

Arginine-Based Polymer Brush Coatings with Hydrolysis-Triggered Switchable Functionalities from Antimicrobial (Cationic) to Antifouling (Zwitterionic).

Arginine polymer based coatings with switchable properties were developed on glass slides (GS) to demonstrate the smart transition from antimicrobial (cationic) to fouling-resistant (zwitterionic) surfaces. l-Arginine methyl ester-methacryloylamide (Arg-Est) and l-arginine-methacryloylamide (Arg-Me) polymer brushes were grafted from the GS surface via surface-initiated reversible addition-fragmentation chain-transfer (SI-RAFT) polymerization. In comparison to the pristine GS and Arg-Me graft polymerized GS (GS-Arg-Me) surfaces, the Arg-Est polymer brushes-functionalized GS surfaces exhibit a superior antimicrobial activity. Upon hydrolysis treatment, the strong bactericidal efficacy switches to good resistance to adsorption of bovine serum albumin (BSA), the adhesion of Gram-positive bacteria Staphylococcus aureus and Gram-negative bacteria Escherichia coli, as well as the attachment of Amphora coffeaeformis. In addition, the switchable coatings are proven to be biocompatible. The stability and durability of the switchable coatings are also ascertained after exposure to filtered seawater for 30 days. Therefore, deposition of the proposed "smart coatings" offers another environmentally friendly alternative for combating biofouling.

Sugar-Grafted Cyclodextrin Nanocarrier as a "Trojan Horse" for Potentiating Antibiotic Activity.

PURPOSE: The use of "Trojan Horse" nanocarriers for antibiotics to enhance the activity of antibiotics against susceptible and resistant bacteria is investigated. METHODS: Antibiotic carriers (CD-MAN and CD-GLU) are prepared from ß-cyclodextrin grafted with sugar molecules (D-mannose and D-glucose, respectively) via azide-alkyne click reaction. The sugar molecules serve as a chemoattractant enticing the bacteria to take in higher amounts of the antibiotic, resulting in rapid killing of the bacteria. RESULTS: Three types of hydrophobic antibiotics, erythromycin, rifampicin and ciprofloxacin, are used as model drugs and loaded into the carriers. The minimum inhibitory concentration of the antibiotics in the CD-MAN-antibiotic and CD-GLU-antibiotic complexes for Gram-negative Escherichia coli, Pseudomonas aeruginosa and Acinetobacter baumannii strains, and a number of Gram-positive Staphylococcus aureus strains, including the methicillin-resistant strains (MRSA), are reduced by a factor ranging from 3 to >100. The CD-MAN-antibiotic complex is also able to prolong the stability of the loaded antibiotic and inhibit development of intrinsic antibiotic resistance in the bacteria. CONCLUSIONS: These non-cytotoxic sugar-modfied nanocarriers can potentiate the activity of existing antibiotics, especially against multidrug-resistant bacteria, which is highly advantageous in view of the paucity of new antibiotics in the pipeline.

Tea stains-inspired initiator primer for surface grafting of antifouling and antimicrobial polymer brush coatings.

Inspired by tea stains, plant polyphenolic tannic acid (TA) was beneficially employed as the primer anchor for functional polymer brushes. The brominated TA (TABr) initiator primer was synthesized by partial modification of TA with alkyl bromide functionalities. TABr with trihydroxyphenyl moieties can readily anchor on a wide range of substrates, including metal, metal oxide, polymer, glass, and silicon. Concomitantly, the alkyl bromide terminals serve as initiation sites for atom transfer radical polymerization (ATRP). Cationic [2-(methacryloyloxy)ethyl]trimethylammonium chloride (META) and zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) and N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine (SBMA) were graft-polymerized from the TABr-anchored stainless steel (SS) surface. The cationic polymer brushes on the modified surfaces are bactericidal, while the zwitterionic coatings exhibit resistance against bacterial adhesion. In addition, microalgal attachment (microfouling) and barnacle cyprid settlement (macrofouling) on the functional polymer-grafted surfaces were significantly reduced, in comparison to the pristine SS surface. Thus, the bifunctional TABr initiator primer provides a unique surface anchor for the preparation of functional polymer brushes for inhibiting both microfouling and macrofouling.

Preparation and unique electrical behaviors of monodispersed hybrid nanorattles of metal nanocores with hairy electroactive polymer shells.

A versatile template-assisted strategy for the preparation of monodispersed rattle-type hybrid nanospheres, encapsulating a movable Au nanocore in the hollow cavity of a hairy electroactive polymer shell (Au@air@PTEMA-g-P3HT hybrid nanorattles; PTEMA: poly(2-(thiophen-3-yl)ethyl methacrylate; P3HT: poly(3-hexylthiophene), was reported. The Au@silica core-shell nanoparticles, prepared by the modified Stöber sol-gel process on Au nanoparticle seeds, were used as templates for the synthesis of Au@silica@PTEMA core-double shell nanospheres. Subsequent oxidative graft polymerization of 3-hexylthiophene from the exterior surface of the Au@silica@PTEMA core-double shell nanospheres allowed the tailoring of surface functionality with electroactive P3HT brushes (Au@silica@PTEMA-g-P3HT nanospheres). The Au@air@ PTEMA-g-P3HT hybrid nanorattles were obtained after etching of the silica interlayer by HF. The as-prepared nanorattles were dispersed into an electrically insulating polystyrene matrix and for the first time used to fabricate nonvolatile memory devices. As a result, unique electrical behaviors, including insulator behavior, write-once-read-many-times and rewritable memory effects, and conductor behavior as well, were observed in the Al/Au@air@PTEMA-g-P3HT+PS/ITO (ITO: indium-tin oxide) sandwich thin-film devices.

Functionalized mesoporous silica nanoparticles with mucoadhesive and sustained drug release properties for potential bladder cancer therapy.

The synthesis of a series of ß-cyclodextrin modified mesoporous silica nanoparticles with hydroxyl, amino, and thiol groups was described. A comparison of their mucoadhesive properties and potential as a drug delivery system for superficial bladder cancer therapy was made. The thiol-functionalized nanoparticles exhibit significantly higher mucoadhesivity on the urothelium as compared to the hydroxyl- and amino-functionalized nanoparticles. This is attributed to the formation of disulfide bonds between the thiol-functionalized nanoparticles and cysteine-rich subdomains of mucus glycoproteins. An anticancer drug, doxorubicin, was loaded into the mesopores of the thiol-functionalized nanoparticles, and sustained drug release triggered by acidic pH was achieved. The present study demonstrates that thiol-functionalized mesoporous silica nanoparticles are promising as a mucoadhesive and sustained drug delivery system for superficial bladder cancer therapy.

In situ synthesis and nonvolatile rewritable-memory effect of polyaniline-functionalized graphene oxide.

A new polyaniline (PANI)-functionalized graphene oxide (GO-PANI) was prepared by using an in situ oxidative graft polymerization of aniline on the surface of GO. Its highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO), ionization potential (IP), and electron affinity (EA) values experimentally estimated by the onset of the redox potentials were -5.33, -3.57, 5.59, and 3.83 eV, respectively. A bistable electrical-switching effect was observed in electronic device with the GO-PANI film sandwiched between the indium tin oxide (ITO) and Al electrodes. This device exhibited two accessible conductivity states, that is, the low-conductivity (OFF) state and the high-conductivity (ON) state, and can be switched to the ON state under a negative electrical sweep, and can also be reset to the initial OFF state by a reverse (positive) electrical sweep. The ON state is nonvolatile and can withstand a constant voltage stress of -1 V for 3 h and 10(8) read cycles at -1 V under ambient conditions. The nonvolatile nature of the ON state and the ability to write, read, and erase the electrical states, fulfill the functionality of a rewritable memory. An ON/OFF current ratio of more than 10(4) at -1 V achieved in this memory device is high enough to promise a low misreading rate through the precise control of the ON and OFF states. The mechanism associated with the memory effects was elucidated from molecular simulation results.

Combined effects of direct current stimulation and immobilized BMP-2 for enhancement of osteogenesis.

Direct current (DC) stimulation has been used to promote bone repair and osteogenesis, but problems associated with the implanted metal electrodes may limit its application and compromise the therapeutic results. The replacement of the metal electrodes with a biodegradable conductive polymer film can potentially overcome these problems. In our work, polypyrrole/chitosan films comprising polypyrrole nanoparticles dispersed in a chitosan matrix were prepared. The polypyrrole/chitosan film meets the requirements for DC delivery, as indicated by its electrical conductivity, biodegradability, and mechanical properties. The film supports osteoblast growth to the same degree as dentine discs (a bone-like mineralized substrate), confirming that it is non-cytotoxic. Our results showed that optimal DC stimulation was achieved with 200 µA for 4 h per day, and under this condition, osteoblast metabolic activity on Day 7 increased by 1.8-fold over that without DC stimulation. To further improve osteogenesis on the polypyrrole/chitosan film, bone morphogenetic protein-2 (BMP-2) was covalently immobilized on the film surface. Osteoblasts cultured on the BMP-2-functionalized polypyrrole/chitosan film and subjected to the optimal DC stimulation exhibited a significant increase in cellular metabolic activity (2.3-fold on Day 7), ALP activity (1.7-fold on Day 21) and mineralization (twofold on Day 21) over those cultured on polypyrrole/chitosan film without DC stimulation. Osteogenic gene expression results showed that BMP-2 and DC stimulation by itself enhanced osteoblast differentiation, and a combination of these two factors resulted in synergistic effects on osteoblast differentiation and maturation.

Barnacle cement as surface anchor for "clicking" of antifouling and antimicrobial polymer brushes on stainless steel.

Barnacle cement (BC) was utilized 'beneficially' as a surface anchor on stainless steel (SS) for coupling of functional polymer brushes via "click" reactions in both "grafting-to" and "grafting-from" processes. Ethylene sulfide (ES), propargyl carbonylimidazole (PPC) and azidoethyl carbonylimidazole (AEC) reacted with amine and/or hydroxyl groups in BC to introduce the corresponding thiol, alkyne, and azide groups on SS surfaces (SS-thiol, SS-alkyne, and SS-azide, respectively). Antifouling zwitterionic SS-PMPC surface was prepared by thiol-ene photopolymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) from the SS-thiol surface. Protein-resistant SS-PPEGMA and protein-adsorbing SS-PPFS surfaces were prepared by coupling of the respective azide-functionalized poly(poly(ethylene glycol)methyl ether methacrylate) (azido-PPEGMA) and poly(2,3,4,5,6-pentafluorostyrene) (azido-PPFS) polymer brushes in azide-alkyne "click" reaction. Antifouling alkyne-functionalized poly(N-hydroxyethyl acrylamide) (alkynyl-PHEAA) and antibacterial alkyne-functionalized poly(2-(methacryloyloxy)ethyl trimethylammonium chloride) (alkynyl-PMETA) polymer brushes were clicked on the SS-azide surface. Adsorption of bovine serum albumin and bacteria fouling of Gram-negative Escherichia coli ( E. coli ) and Gram-positive Staphylococcus epidermidis ( S. epidermidis ) were investigated on the polymer-functionalized SS surfaces. The versatile bioanchor and functional polymer brush coatings are stable in an abiotic aqueous environment for over a month.

Reactive graphene oxide nanosheets: a versatile platform for the fabrication of graphene oxide-biomolecule/polymer nanohybrids.

Graphene oxide (GO) nanosheets can be functionalized with reactive pentafluorophenyl ester via esterification of the carboxylic groups. The resulting reactive GO nanosheets provide a versatile platform for grafting of amino-containing polymers or biomolecules via ester-amine coupling. Coupling of poly[(9,9-dioctylfluorene)-alt-(4-amino-phenylcarbazole)] (PFCz-NH(2) ), amino-terminated hyperbranched polyglycerol (HPG-NH(2) ), and lysozyme (Lyz) was illustrated. The Al/GO-g-PFCz/ITO sandwich thin-film device exhibits bistable electrical switching and rewritable memory effects. The GO-g-Lyz nanohybrids exhibit high bactericidal efficacy against S. aureus and E. coli, while the GO-g-HPG nanohybrids exhibit reduced cytotoxicity toward 3T3 fibroblasts.

Light-responsive smart nanocarriers for wirelessly controlled photodynamic therapy for prostate cancers.

Photodynamic therapy (PDT) is an effective non-invasive or minimally invasive treatment method against different tumors. Loading photosensitizers in nanocarriers can potentially increase their accumulation in tumor sites. However, the PDT efficacy may be hindered because of self-quenching of the encapsulated photosensitizer and the small diffusion radii of the generated reactive oxygen species (ROS). Herein, light responsive nano assemblies composed of (Polyethylene glycol)-block-poly(4,5-dimethoxy-2-nitrobenzylmethacrylate) (PEG-b-PNBMA) were designed and loaded with the photosensitizer, Rose Bengal lactone (RB), to act as a smart nanocarrier (RB-M) for the delivery of the photosensitizer. A wirelessly activated light-emitting diode (LED) implant was designed to programmatically induce the release of the loaded RB first, followed by activating PDT after diffusion of RB into the cytoplasm. The results showed that sequential '405-580 nm' irradiation of the RB-M treated 22RV1 cells resulted in the highest PDT outcome among different irradiation protocols. The combination of this smart nanocarrier and sequential '405-580 nm' irradiation strategy exhibited good PDT efficacy against 2D 22RV1 prostate cancer cells as well as 3D cancer cell spheroids. This platform overcomes the light penetration limitations in PDT, and can potentially be applied in cancer bearing patients who are unfit for chemotherapy. STATEMENT OF SIGNIFICANCE: Nanocarriers for the delivery of photosensitizer in photodynamic therapy may result in relatively low therapeutic efficacy because of self-quenching of the encapsulated photosensitizer and the small diffusion radii of the generated reactive oxygen species (ROS). Light responsive smart nanocarriers can potentially overcome this challenge. In this study, a light responsive polymer (Polyethylene glycol)-block-poly(4,5-dimethoxy-2-nitrobenzylmethacrylate) (PEG-b-PNBMA) was synthesized and utilized to fabricate the smart nanocarrier. A wirelessly activated light-emitting diode (LED) implant was designed for light delivery in deep tissue. This new approach permits wirelessly and programmatically control of photosensitizer release and PDT activation under deep tissue, thus significantly enhancing PDT efficacy against prostate cancer cells as well as 3D cancer cell spheroids. This design should have a significant impact on controllable PDT under deep tissue.

Affinity analysis of DNA aptamer-peptide interactions using gold nanoparticles.

Gold nanoparticles (AuNPs) were used as colorimetric probe and fluorescence quencher for affinity analysis of DNA aptamers toward their target mucin 1 (MUC1) peptide. Single-stranded DNA (ssDNA) aptamer-coated AuNPs showed increased stability (i.e., more resistant to aggregation induced by NaCl) in the presence of their target peptide due to the increase in steric protection conferred by the ssDNA-peptide complexes formed on the AuNPs. Based on changes in the UV-vis extinction spectrum of AuNPs (a measure of AuNPs aggregation) and fluorescence restoration of CY5-ssDNA upon ssDNA-peptide complex formation, the formation of the complexes and ssDNA sequence-dependent dissociation constant (K(d)) were determined. Besides the UV-vis and fluorescence measurements, the hydrodynamic diameters, zeta potential measurements, and transmission electron microscopy (TEM) images of AuNPs after various coatings supported the assay principle. The methodology presented herein provides a rapid and sensitive alternative solution for the identification of high affinity binders from systematic evolution of ligands by exponential enrichment (SELEX).

Inhibition of Escherichia coli and Proteus mirabilis adhesion and biofilm formation on medical grade silicone surface.

Silicone has been utilized extensively for biomedical devices due to its excellent biocompatibility and biodurability properties. However, its surface is easily colonized by bacteria which will increase the probability of nosocomial infection. In the present work, a hydrophilic antimicrobial carboxymethyl chitosan (CMCS) layer has been grafted on medical grade silicone surface pre-treated with polydopamine (PDA). The increase in hydrophilicity was confirmed from contact angle measurement. Bacterial adhesion tests showed that the PDA-CMCS coating reduced the adhesion of Escherichia coli and Proteus mirabilis by ≥ 90%. The anti-adhesion property was preserved even after the aging of the functionalized surfaces for 21 days in phosphate-buffered saline (PBS), and also after autoclaving at 121°C for 20 min. Both E. coli and P. mirabilis readily form biofilms on the pristine surface under static and flow conditions but with the PDA-CMCS layer, biofilm formation is inhibited. The flow experiments indicated that it is more difficult to inhibit biofilm formation by the highly motile P. mirabilis as compared to E. coli. No significant cytotoxicity of the modified substrates was observed with 3T3 fibroblasts.

Combined ATRP and 'click' chemistry for designing stable tumor-targeting superparamagnetic iron oxide nanoparticles.

Important issues in the design of superparamagnetic iron oxide nanoparticles (SPIONs) for cancer diagnosis include stability under physiological conditions and specificity in targeting the cancer cells. In the present study, atom transfer radical polymerization (ATRP) was used to graft SPIONs with poly(glycidyl methacrylate-co-poly(ethylene glycol) methyl ether methacrylate) (SPIONs-P(GMA-co-PEGMA)). The PEGMA in the copolymer chain confers high stability to the nanoparticles in aqueous medium, and prevents recognition by macrophages with the aim of prolonging their in vivo circulation time. The GMA groups were used for conjugating the cancer targeting ligand, folic acid (FA), via 'click' chemistry. Using this method, the amount of FA conjugated to the nanoparticles (SPIONs-P(GMA-co-PEGMA)-FA) can be readily controlled. The specificity of cellular uptake of the nanoparticles by three different cell lines was investigated. The cellular iron uptake by KB cells (human epidermoid carcinoma) after 24 h of incubation is about thirteen and five times higher than those by 3T3 fibroblasts and macrophages, respectively. No significant cytotoxicity was observed with these three types of cells. The high targeting efficiency and biocompatibility of these nanoparticles are promising features for in vivo specific targeting and detection of tumor cells which overexpress the folate receptor.

Surface modification of silicone for biomedical applications requiring long-term antibacterial, antifouling, and hemocompatible properties.

Silicone has been used for peritoneal dialysis (PD) catheters for several decades. However, bacteria, platelets, proteins, and other biomolecules tend to adhere to its hydrophobic surface, which may lead to PD outflow failure, serious infection, or even death. In this work, a cross-linked poly(poly(ethylene glycol) dimethacrylate) (P(PEGDMA)) polymer layer was covalently grafted on medical-grade silicone surface to improve its antibacterial and antifouling properties. The P(PEGDMA)-grafted silicone (Silicone-g-P(PEGDMA)) substrate reduced the adhesion of Staphylococcus aureus , Escherichia coli , and Staphylococcus epidermidis , as well as 3T3 fibroblast cells by ≥90%. The antibacterial and antifouling properties were preserved after the modified substrate was aged for 30 days in phosphate buffer saline. Further immobilization of a polysulfobetaine polymer, poly((2-(methacryloyloxy)ethyl)dimethyl-(3-sulfopropyl)ammonium hydroxide) (P(DMAPS)), on the Silicone-g-P(PEGDMA) substrate via thiol-ene click reaction leads to enhanced antifouling efficacy and improved hemocompatibility with the preservation of the antibacterial property. Compared to pristine silicone, the so-obtained Silicone-g-P(PEGDMA)-P(DMAPS) substrate reduced the absorption of bovine serum albumin and bovine plasma fibrinogen by ≥80%. It also reduced the number of adherent platelets by ≥90% and significantly prolonged plasma recalcification time. The results indicate that surface grafting with P(PEGDMA) and P(DMAPS) can be potentially useful for the modification of silicone-based PD catheters for long-term applications.

Polymeric nanoparticles with encapsulated superparamagnetic iron oxide and conjugated cisplatin for potential bladder cancer therapy.

Amphiphilic poly(ε-caprolactone)-b-poly(propargyl methacrylate-click-mercaptosuccinic acid-co-poly(ethylene glycol) methyl ether methacrylate) (PCL-b-P(PMA-click-MSA-co-PEGMA)) were synthesized by a combination of ring-opening polymerization, reversible addition-fragmentation chain transfer (RAFT) polymerization, and thiol-yne "click" reaction. The hydrophobic PCL core can be used to load superparamagnetic iron oxide nanoparticles (SPIONs), while the pendant dicarboxylic groups in the hydrophilic shell are used to coordinate cisplatin. These SPIONs-loaded, cisplatin-conjugated polymeric nanoparticles (Pt-Fe-PNs) are superparamagnetic at room temperature and are mucoadhesive. Release of cisplatin from Pt-Fe-PNs in artificial urine at 37 °C was characterized by an initial burst release with a release of ∼30% of the cisplatin in the first 4 h followed by a slow sustained release over 4 days. The cisplatin release can be further enhanced by increasing the temperature. These Pt-Fe-PNs can effectively induce cytotoxicity against UMUC3 bladder cancer cells with IC(50) of 32.3 µM. These results indicate that Pt-Fe-PNs is potentially a promising cisplatin delivery vehicle which can be combined with SPIONs-induced hyperthermia for bladder cancer therapy.

Layer-by-layer click deposition of functional polymer coatings for combating marine biofouling.

"Click" chemistry-enabled layer-by-layer (LBL) deposition of multilayer functional polymer coatings provides an alternative approach to combating biofouling. Fouling-resistant azido-functionalized poly(ethylene glycol) methyl ether methacrylate-based polymer chains (azido-poly(PEGMA)) and antimicrobial alkynyl-functionalized 2-(methacryloyloxy)ethyl trimethyl ammonium chloride-based polymer chains (alkynyl-poly(META)) were click-assembled layer-by-layer via alkyne-azide 1,3-dipolar cycloaddition. The polymer multilayer coatings are resistant to bacterial adhesion and are bactericidal to marine Gram-negative Pseudomonas sp. NCIMB 2021 bacteria. Settlement of barnacle ( Amphibalanus (= Balanus ) amphitrite ) cyprids is greatly reduced on the multilayer polymer-functionalized substrates. As the number of the polymer layers increases, efficacy against bacterial fouling and settlement of barnacle cyprids increases. The LBL-functionalized surfaces exhibit low toxicity toward the barnacle cyprids and are stable upon prolonged exposure to seawater. LBL click deposition is thus an effective and potentially environmentally benign way to prepare antifouling coatings.