New Spectroelectrochemical Insights into Manganese and Rhenium Bipyridine Complexes as Catalysts for the Electrochemical Reduction of Carbon Dioxide.

This study aimed to demonstrate the behavior of different complexes using IR spectroelectrochemistry (SEC), a technique that combines IR spectroscopy with electrochemistry. Four different Mn and Re catalysts for electrochemical CO2 reduction were studied in dry acetonitrile. In the case of Mn(apbpy)(CO)3Br (apbpy = 4(4-aminophenyl)-2,2'-bipyridine), SEC suggested that a very slow catalytic reduction of CO2 also occurs in acetonitrile in the absence of proton donors, but at rather negative potentials. In contrast, the corresponding Re(apbpy)(CO)3Br clearly demonstrated slow catalytic conversion at the first reduction potential. Switching to saturated CO2 solutions in a mixture of acetonitrile and 5% water as a proton donor, the SEC of Mn(apbpy)(CO)3Br displayed a faster catalytic behavior.

Zwitterionic or Not? Fast and Reliable Structure Determination by Combining Crystal Structure Prediction and Solid-State NMR.

When it comes to crystal structure determination, computational approaches such as Crystal Structure Prediction (CSP) have gained more and more attention since they offer some insight on how atoms and molecules are packed in the solid state, starting from only very basic information without diffraction data. Furthermore, it is well known that the coupling of CSP with solid-state NMR (SSNMR) greatly enhances the performance and the accuracy of the predictive method, leading to the so-called CSP-NMR crystallography (CSP-NMRX). In this paper, we present the successful application of CSP-NMRX to determine the crystal structure of three structural isomers of pyridine dicarboxylic acid, namely quinolinic, dipicolinic and dinicotinic acids, which can be in a zwitterionic form, or not, in the solid state. In a first step, mono- and bidimensional SSNMR spectra, i.e., 1H Magic-Angle Spinning (MAS), 13C and 15N Cross Polarisation Magic-Angle Spinning (CPMAS), 1H Double Quantum (DQ) MAS, 1H-13C HETeronuclear CORrelation (HETCOR), were used to determine the correct molecular structure (i.e., zwitterionic or not) and the local molecular arrangement; at the end, the RMSEs between experimental and computed 1H and 13C chemical shifts allowed the selection of the correct predicted structure for each system. Interestingly, while quinolinic and dipicolinic acids are zwitterionic and non-zwitterionic, respectively, in the solid state, dinicotinic acid exhibits in its crystal structure a "zwitterionic-non-zwitterionic continuum state" in which the proton is shared between the carboxylic moiety and the pyridinic nitrogen. Very refined SSNMR experiments were carried out, i.e., 14N-1H Phase-Modulated (PM) pulse and Rotational-Echo Saturation-Pulse Double-Resonance (RESPDOR), to provide an accurate N-H distance value confirming the hybrid nature of the molecule. The CSP-NMRX method showed a remarkable match between the selected structures and the experimental ones. The correct molecular input provided by SSNMR reduced the number of CSP calculations to be performed, leading to different predicted structures, while RMSEs provided an independent parameter with respect to the computed energy for the selection of the best candidate.

Efficient Electrochemical Reduction of CO2 to Formate in Methanol Solutions by Mn-Functionalized Electrodes in the Presence of Amines.

Carbon cloth electrode modified by covalently attaching a manganese organometallic catalyst is used as cathode for the electrochemical reduction of CO2 in methanol solutions. Six different industrial amines are employed as co-catalyst in millimolar concentrations to deliver a series of new reactive system. While such absorbents were so far believed to provide a CO2 reservoir and act as sacrificial proton source, we herein demonstrate that this role can be played by methanol, and that the adduct formed between CO2 and the amine can act as an effector or inhibitor toward the catalyst, thereby enhancing or reducing the production of formate. Pentamethyldiethylentriamine (PMDETA), identified as the best effector in our series, converts CO2 in wet methanolic solution into bisammonium bicarbonate. Computational studies revealed that this adduct is responsible for a barrierless transformation of CO2 to formate by the reduced form of the Mn catalyst covalently bonded to the electrode surface. As a consequence, selectivity can be switched on demand from CO to formate anion, and in the case of (PMDETA) an impressive TONHCOO- of 2.8×104 can be reached. This new valuable knowledge on an integrated capture and utilization system paves the way toward more efficient transformation of CO2 into liquid fuel.

Solid-State NMR-Driven Crystal Structure Prediction of Molecular Crystals: The Case of Mebendazole.

Among all possible NMR crystallography approaches for crystal-structure determination, crystal structure prediction - NMR crystallography (CSP-NMRX) has recently turned out to be a powerful method. In the latter, the original procedure exploited solid-state NMR (SSNMR) information during the final steps of the prediction. In particular, it used the comparison of computed and experimental chemical shifts for the selection of the correct crystal packing. Still, the prediction procedure, generally carried out with DFT methods, may require important computational resources and be quite time-consuming, especially if there are no available constraints to use at the initial stage. Herein, the successful application of this combined prediction method, which exploits NMR information also in the input step to reduce the search space of the predictive algorithm, is presented. Herein, this method was applied on mebendazole, which is characterized by desmotropism. The use of SSNMR data as constraints for the selection of the right tautomer and the determination of the number of independent molecules in the unit cell led to a considerably faster process, reducing the number of calculations to be performed. In this way, the crystal packing was successfully predicted for the three known phases of mebendazole. To evaluate the quality of the predicted structures, these were compared to the experimental ones. The crystal structure of phase B of mebendazole, in particular, was determined de novo by powder diffraction and is presented for the first time in this paper.

A Review of Mechanical and Chemical Sensors for Automotive Li-Ion Battery Systems.

The electrification of passenger cars is one of the most effective approaches to reduce noxious emissions in urban areas and, if the electricity is produced using renewable sources, to mitigate the global warming. This profound change of paradigm in the transport sector requires the use of Li-ion battery packages as energy storage systems to substitute conventional fossil fuels. An automotive battery package is a complex system that has to respect several constraints: high energy and power densities, long calendar and cycle lives, electrical and thermal safety, crash-worthiness, and recyclability. To comply with all these requirements, battery systems integrate a battery management system (BMS) connected to an complex network of electric and thermal sensors. On the other hand, since Li-ion cells can suffer from degradation phenomena with consequent generation of gaseous emissions or determine dimensional changes of the cell packaging, chemical and mechanical sensors should be integrated in modern automotive battery packages to guarantee the safe operation of the system. Mechanical and chemical sensors for automotive batteries require further developments to reach the requested robustness and reliability; in this review, an overview of the current state of art on such sensors will be proposed.

Dipyridylmethane Ethers as Ligands for Luminescent Ir Complexes.

This work reports two new cationic heteroleptic cyclometalated iridium complexes, containing ether derivatives of di(pyridin-2-yl)methanol. The new ligands are based on dipyridin-2-ylmethane and are designed to obtain ether-based intermediates with extended electronic conjugation by insertion of π system such as phenyl, allyl and ethynyl. Different synthetic strategies were employed to introduce these units, as molecular wires, between the dipyridin-2-ylmethane chelating portion and the terminal N-containing functional group, such as amine and carbamide. The corresponding complexes show luminescence in the blue region of the spectrum, lifetimes between 0.6 and 2.1 µs, high quantum yield and good electrochemical behavior. The computational description (DFT) of the electronic structure highlights the key role of the conjugated π systems on optical and electrochemical properties of the final products.

Molecular Catalysts with Intramolecular Re-O Bond for Electrochemical Reduction of Carbon Dioxide.

A new Re bipyridine-type complex, namely, fac-Re(pmbpy)(CO)3Cl (pmbpy = 4-phenyl-6-(2-hydroxy-phenyl)-2,2'-bipyridine), 1, carrying a single OH moiety as local proton source, has been synthesized, and its electrochemical behavior under Ar and under CO2 has been characterized. Two isomers of 1, namely, 1-cis characterized by the proximity of Cl to OH and 1-trans, are identified. The interconversion between 1-cis and 1-trans is clarified by DFT calculations, which reveal two transition states. The energetically lower pathway displays a non-negligible barrier of 75.5 kJ mol-1. The 1e- electrochemical reduction of 1 affords the neutral intermediate 1-OPh, formally derived by reductive deprotonation and loss of Cl- from 1. 1-OPh, which exhibits an entropically favored intramolecular Re-O bond, has been isolated and characterized. The detailed electrochemical mechanism is demonstrated by combined chemical reactivity, spectroelectrochemistry, spectroscopic (IR and NMR), and computational (DFT) approaches. Comparison with previous Re and Mn derivatives carrying local proton sources highlights that the catalytic activity of Re complexes is more sensitive to the presence of local OH groups. Similar to Re-2OH (2OH = 4-phenyl-6-(phenyl-2,6-diol)-2,2'-bipyridine), 1 and Mn-1OH display a selective reduction of CO2 to CO. In the case of the Re bipyridine-type complex, the formation of a relatively stable Re-O bond and a preference for phenolate-based reactivity with CO2 slightly inhibit the electrocatalytic reduction of CO2 to CO, resulting in a low TON value of 9, even in the presence of phenol as a proton source.

Proton in a Confined Space: Structural Studies of H+ ⊂Crypt-111 Iodide and Some Halogen-Bonded Derivatives.

Experimental observations and modeling data are reported on the solid-state structural features of crypt- 111⋅HI (1) and the three-component co-crystals that 1 forms with α,ω-diiodoperfluoroalkanes 2 a-d. X-ray analyses indicate that, in all five systems and at low temperature, the caged proton is covalently bonded to a single nitrogen atom and is involved in a network of intramolecular hydrogen bonds. In contrast, room-temperature, solid-state 15 N NMR spectroscopy suggests magnetic equivalency of the two N atoms of crypt-111 in both 1 and co-crystals of 1 with diiodoperfluoroalkanes. Computational modelling confirms that the acidic hydrogen inside the cavity preferentially sits along the internitrogen axis and is covalently bonded to one nitrogen. The computed energy barriers suggest that the hopping of the encapsulated proton between the two N atoms of the cage can occur in the halogen-bonded co-crystals of 1⋅2, but it is hardly possible in the pure H+ ⊂crypt-111 iodide 1. These different pictures of the proton position and dynamics obtained by using different techniques and conditions confirm the unique characteristics of the confined space within the cavity of crypr-111 and the distinctive features of processes occurring therein.

Local Proton Source in Electrocatalytic CO2 Reduction with [Mn(bpy-R)(CO)3 Br] Complexes.

The electrochemical behavior of fac-[Mn(pdbpy)(CO)3 Br] (pdbpy=4-phenyl-6-(phenyl-2,6-diol)-2,2'-bipyridine) (1) in acetonitrile under Ar, and its catalytic performances for CO2 reduction with added water, 2,2,2-trifluoroethanol (TFE), and phenol are discussed in detail. Preparative-scale electrolysis experiments, carried out at -1.5 V versus the standard calomel electrode (SCE) in CO2 -saturated acetonitrile, reveal that the process selectivity is extremely sensitive to the acid strength, producing CO and formate in different faradaic yields. A detailed spectroelectrochemical (IR and UV/Vis) study under Ar and CO2 atmospheres shows that 1 undergoes fast solvolysis; however, dimer formation in acetonitrile is suppressed, resulting in an atypical reduction mechanism in comparison with other reported MnI catalysts. Spectroscopic evidence of Mn hydride formation supports the existence of different electrocatalytic CO2 reduction pathways. Furthermore, a comparative investigation performed on the new fac-[Mn(ptbpy)(CO)3 Br] (ptbpy=4-phenyl-6-(phenyl-3,4,5-triol)-2,2'-bipyridine) catalyst (2), bearing a bipyridyl derivative with OH groups in different positions to those in 1, provides complementary information about the role that the local proton source plays during the electrochemical reduction of CO2 .

Electrochemical CO2 Reduction at Glassy Carbon Electrodes Functionalized by MnI and ReI Organometallic Complexes.

The catalytic activities towards electrochemical CO2 reduction of two new rhenium and manganese complexes, namely fac-Mn(apbpy)(CO)3 Br (1) and fac-Re(apbpy)(CO)3 Cl (2) (apbpy=4-(4-aminophenyl)-2,2'-bipyridine), in both homogeneous and heterogeneous phases are compared. A glassy carbon electrode (GCE) surface has been functionalized with complexes 1 and 2 by two approaches: a) direct electrochemical oxidation of the amino group with formation of C-N bonds, and b) electrochemical reduction of the corresponding diazonium salts with formation of C-C bonds. The chemically modified GCEs show efficient conversion of CO2 into CO, with turnover numbers (TONs) about 60 times higher than those of the corresponding catalysts in homogeneous solutions, and in a much shorter time.

Natural Abundance 15 N and 13 C Solid-State NMR Chemical Shifts: High Sensitivity Probes of the Halogen Bond Geometry.

Solid-state nuclear magnetic resonance (SSNMR) spectroscopy is a versatile characterization technique that can provide a plethora of information complementary to single crystal X-ray diffraction (SCXRD) analysis. Herein, we present an experimental and computational investigation of the relationship between the geometry of a halogen bond (XB) and the SSNMR chemical shifts of the non-quadrupolar nuclei either directly involved in the interaction (15 N) or covalently bonded to the halogen atom (13 C). We have prepared two series of X-bonded co-crystals based upon two different dipyridyl modules, and several halobenzenes and diiodoalkanes, as XB-donors. SCXRD structures of three novel co-crystals between 1,2-bis(4-pyridyl)ethane, and 1,4-diiodobenzene, 1,6-diiodododecafluorohexane, and 1,8-diiodohexadecafluorooctane were obtained. For the first time, the change in the 15 N SSNMR chemical shifts upon XB formation is shown to experimentally correlate with the normalized distance parameter of the XB. The same overall trend is confirmed by density functional theory (DFT) calculations of the chemical shifts. 13 C NQS experiments show a positive, linear correlation between the chemical shifts and the C-I elongation, which is an indirect probe of the strength of the XB. These correlations can be of general utility to estimate the strength of the XB occurring in diverse adducts by using affordable SSNMR analysis.

The Role of the Amino Protecting Group during Parahydrogenation of Protected Dehydroamino Acids.

A series of dehydroamino acids endowed with different protective groups at the amino and carboxylate moieties and with different substituents at the double bond have been reacted with parahydrogen. The observed ParaHydrogen Induced Polarization (PHIP) effects in the (1)H NMR spectra are strongly dependent on the amino protecting group. DFT calculations allowed us to establish a relationship between the structures of the reaction intermediates (whose energies depend on the amido substitution) and the observed PHIP patterns.

Monolithic cells for solar fuels.

Hybrid energy generation models based on a variety of alternative energy supply technologies are considered the best way to cope with the depletion of fossil energy resources and to limit global warming. One of the currently missing technologies is the mimic of natural photosynthesis to convert carbon dioxide and water into chemical fuel using sunlight. This idea has been around for decades, but artificial photosynthesis of organic molecules is still far away from providing real-world solutions. The scientific challenge is to perform in an efficient way the multi-electron transfer reactions of water oxidation and carbon dioxide reduction using holes and single electrons generated in an illuminated semiconductor. In this tutorial review the design of photoelectrochemical (PEC) cells that combine solar water oxidation and CO2 reduction is discussed. In such PEC cells simultaneous transport and efficient use of light, electrons, protons and molecules has to be managed. It is explained how efficiency can be gained by compartmentalisation of the water oxidation and CO2 reduction processes by proton exchange membranes, and monolithic concepts of artificial leaves and solar membranes are presented. Besides transferring protons from the anode to the cathode compartment the membrane serves as a molecular barrier material to prevent cross-over of oxygen and fuel molecules. Innovative nano-organized multimaterials will be needed to realise practical artificial photosynthesis devices. This review provides an overview of synthesis techniques which could be used to realise monolithic multifunctional membrane-electrode assemblies, such as Layer-by-Layer (LbL) deposition, Atomic Layer Deposition (ALD), and porous silicon (porSi) engineering. Advances in modelling approaches, electrochemical techniques and in situ spectroscopies to characterise overall PEC cell performance are discussed.

Photophysics of singlet and triplet intraligand excited states in [ReCl(CO)3(1-(2-pyridyl)-imidazo[1,5-α]pyridine)] complexes.

Excited-state characters and dynamics of [ReCl(CO)3(3-R-1-(2-pyridyl)-imidazo[1,5-α]pyridine)] complexes (abbreviated ReGV-R, R = CH3, Ph, PhBu(t), PhCF3, PhNO2, PhNMe2) were investigated by pico- and nanosecond time-resolved infrared spectroscopy (TRIR) and excited-state DFT and TD-DFT calculations. Near UV excitation populates the lowest singlet state S1 that undergoes picosecond intersystem crossing (ISC) to the lowest triplet T1. Both states are initially formed hot and relax with ∼20 ps lifetime. TRIR together with quantum chemical calculations reveal that S1 is predominantly a ππ* state localized at the 1-(2-pyridyl)-imidazo[1,5-α]pyridine (= impy) ligand core, with impy → PhNO2 and PhNMe2 → impy intraligand charge-transfer contributions in the case of ReGV-PhNO2 and ReGV-PhNMe2, respectively. T1 is predominantly ππ*(impy) in all cases. It follows that excited singlet and corresponding triplet states have to some extent different characters and structures even if originating nominally from the same preponderant one-electron excitations. ISC occurs with a solvent-independent (CH2Cl2, MeCN) 20-30 ps lifetime, except for ReGV-PhNMe2 (10 ps in CH2Cl2, 100 ps in MeCN). ISC is 200-300 times slower than in analogous complexes with low-lying MLCT states. This difference is interpreted in terms of spin-orbit interaction and characters of orbitals involved in one-electron excitations that give rise to S1 and T1 states. ReGV-R present a unique case of octahedral heavy-metal complexes where the S1 lifetime is long enough to allow for separate spectroscopic characterization of singlet and triplet excited states. This study provides an insight into dynamics and intersystem crossing pathways of low-lying singlet and triplet excited states localized at bidentate ligands bound directly to a heavy metal atom. Rather long (1)IL lifetimes indicate the possibility of photonic applications of singlet excited states.

Probing hydrogen bond networks in half-sandwich Ru(II) building blocks by a combined 1H DQ CRAMPS solid-state NMR, XRPD, and DFT approach.

The hydrogen bond network of three polymorphs (1α, 1ß, and 1γ) and one solvate form (1·H2O) arising from the hydration-dehydration process of the Ru(II) complex [(p-cymene)Ru(κN-INA)Cl2] (where INA is isonicotinic acid), has been ascertained by means of one-dimensional (1D) and two-dimensional (2D) double quantum (1)H CRAMPS (Combined Rotation and Multiple Pulses Sequences) and (13)C CPMAS solid-state NMR experiments. The resolution improvement provided by homonuclear decoupling pulse sequences, with respect to fast MAS experiments, has been highlighted. The solid-state structure of 1γ has been fully characterized by combining X-ray powder diffraction (XRPD), solid-state NMR, and periodic plane-wave first-principles calculations. None of the forms show the expected supramolecular cyclic dimerization of the carboxylic functions of INA, because of the presence of Cl atoms as strong hydrogen bond (HB) acceptors. The hydration-dehydration process of the complex has been discussed in terms of structure and HB rearrangements.

Leucopterin, the white pigment in butterfly wings: structural analysis by PDF fit, FIDEL fit, Rietveld refinement, solid-state NMR and DFT-D.

Leucopterin (C6H5N5O3) is the white pigment in the wings of Pieris brassicae butterflies, and other butterflies; it can also be found in wasps and other insects. Its crystal structure and its tautomeric form in the solid state were hitherto unknown. Leucopterin turned out to be a variable hydrate, with 0.5 to about 0.1 molecules of water per leucopterin molecule. Under ambient conditions, the preferred state is the hemihydrate. Initially, all attempts to grow single crystals suitable for X-ray diffraction were to no avail. Attempts to determine the crystal structure by powder diffraction using the direct-space method failed, because the trials did not include the correct, but rare, space group P2/c. Attempts were made to solve the crystal structure by a global fit to the pair distribution function (PDF-Global-Fit), as described by Prill and co-workers [Schlesinger et al. (2021). J. Appl. Cryst. 54, 776-786]. The approach worked well, but the correct structure was not found, because again the correct space group was not included. Finally, tiny single crystals of the hemihydrate could be obtained, which allowed at least the determination of the crystal symmetry and the positions of the C, N and O atoms. The tautomeric state of the hemihydrate was assessed by multinuclear solid-state NMR spectroscopy. 15N CPMAS spectra showed the presence of one NH2 and three NH groups, and one unprotonated N atom, which agreed with the 1H MAS and 13C CPMAS spectra. Independently, the tautomeric state was investigated by lattice-energy minimizations with dispersion-corrected density functional theory (DFT-D) on 17 different possible tautomers, which also included the prediction of the corresponding 1H, 13C and 15N chemical shifts in the solid. All methods showed the presence of the 2-amino-3,5,8-H tautomer. The DFT-D calculations also confirmed the crystal structure. Heating of the hemihydrate results in a slow release of water between 130 and 250 °C, as shown by differential thermal analysis and thermogravimetry (DTA-TG). Temperature-dependent powder X-ray diffraction (PXRD) showed an irreversible continuous shift of the reflections upon heating, which reveals that leucopterin is a variable hydrate. This observation was also confirmed by PXRD of samples obtained under various synthetic and drying conditions. The crystal structure of a sample with about 0.2 molecules of water per leucopterin was solved by a fit with deviating lattice parameters (FIDEL), as described by Habermehl et al. [Acta Cryst. (2022), B78, 195-213]. A local fit, starting from the structure of the hemihydrate, as well as a global fit, starting from random structures, were performed, followed by Rietveld refinements. Despite dehydration, the space group remains P2/c. In both structures (hemihydrate and variable hydrate), the leucopterin molecules are connected by 2-4 hydrogen bonds into chains, which are connected by further hydrogen bonds to neighbouring chains. The molecular packing is very efficient. The density of leucopterin hemihydrate is as high as 1.909 kg dm-3, which is one of the highest densities for organic compounds consisting of C, H, N and O only. The high density might explain the good light-scattering and opacity properties of the wings of Pieris brassicae and other butterflies.

Ambiguous structure determination from powder data: four different structural models of 4,11-di-fluoro-quinacridone with similar X-ray powder patterns, fit to the PDF, SSNMR and DFT-D.

Four different structural models, which all fit the same X-ray powder pattern, were obtained in the structure determination of 4,11-di-fluoro-quinacridone (C20H10N2O2F2) from unindexed X-ray powder data by a global fit. The models differ in their lattice parameters, space groups, Z, Z', molecular packing and hydrogen bond patterns. The molecules form a criss-cross pattern in models A and B, a layer structure built from chains in model C and a criss-cross arrangement of dimers in model D. Nevertheless, all models give a good Rietveld fit to the experimental powder pattern with acceptable R-values. All molecular geometries are reliable, except for model D, which is slightly distorted. All structures are crystallochemically plausible, concerning density, hydrogen bonds, intermolecular distances etc. All models passed the checkCIF test without major problems; only in model A a missed symmetry was detected. All structures could have probably been published, although 3 of the 4 structures were wrong. The investigation, which of the four structures is actually the correct one, was challenging. Six methods were used: (1) Rietveld refinements, (2) fit of the crystal structures to the pair distribution function (PDF) including the refinement of lattice parameters and atomic coordinates, (3) evaluation of the colour, (4) lattice-energy minimizations with force fields, (5) lattice-energy minimizations by two dispersion-corrected density functional theory methods, and (6) multinuclear CPMAS solid-state NMR spectroscopy (1H, 13C, 19F) including the comparison of calculated and experimental chemical shifts. All in all, model B (perhaps with some disorder) can probably be considered to be the correct one. This work shows that a structure determination from limited-quality powder data may result in totally different structural models, which all may be correct or wrong, even if they are chemically sensible and give a good Rietveld refinement. Additionally, the work is an excellent example that the refinement of an organic crystal structure can be successfully performed by a fit to the PDF, and the combination of computed and experimental solid-state NMR chemical shifts can provide further information for the selection of the most reliable structure among several possibilities.

Solid-state (15)N CPMAS NMR and computational analysis of ligand hapticity in rhodium(η-diene) poly(pyrazolyl)borate complexes.

Novel [Rh(η-diene)Tp(x)] complexes of sterically encumbered Tp(x) ligands (Tp(x) = Tp(4Bo), diene = cod, 1; nbd, 2; Tp(x) = Tp(4Bo,5Me), diene = cod, 3; nbd, 4; Tp(x) = Tp(a,3Me), diene = cod, 5; nbd, 6; Tp(x) = Tp(a*,3Me), diene = cod, 7; nbd, 8) have been prepared by treatment of [Rh(η-diene)(µ-Cl)](2) with TlTp(x) (Tp(x) in general, in detail: Tp(4Bo) = hydrotris(indazol-1-yl)borate, Tp(4Bo,5Me) = hydrotris(5-methyl-indazol-1-yl)borate, Tp(a,3Me) = hydrotris(3-methyl-2H-benz[g]-4,5-dihydroindazol-2-y1)borate, Tp(a*,3Me) = hydrotris(3-methyl-2H-benz[g]indazol-2-yl)borate), and characterized by analytical and spectral data (IR, (1)H, (11)B, and (13)C NMR solution). The structures adopted by [Rh(nbd)Tp(4Bo)] 2, [Rh(cod)Tp(4Bo,5Me)] 3, [Rh(nbd)Tp(a,3Me)] 6, [Rh(nbd)Tp(a*,3Me)] 8, and [Rh(nbd)Tp(a*,3Me*)] 8* (incorporating a borotropomeric ligand), have been investigated. Low steric hindrance between the ligands in 2 and 3 permits κ(3) coordination of the pyrazolylborate while the high steric encumbrance present in 6, 8, and 8* results in κ(2) ligands. The coordination modes of the ligands to the metal have also been established by (15)N CPMAS studies of selected ligands and their corresponding Rh complexes. These spectroscopic data are in agreement with the (15)N chemical shifts obtained by using quantum-chemical methods to assist reliable assignments of the experimental values, affording new insights into the extraction of structural information concerning the hapticity (κ(2) or κ(3)) of the poly(pyrazolyl)borate ligands to the Rh metal.

Simultaneous CO2 capture and metal purification from waste streams using triple-level dynamic combinatorial chemistry.

A reduction in CO2 emissions is required to mitigate global warming. Post-combustion carbon capture is one of the most developed technologies that has the potential to meet this goal, but its cost prevents its widespread use. A different approach would be to use CO2 directly as it is captured, before it is stored. Here we explore spontaneous CO2 fixation by industrial polyamines as a strategy to generate dynamic libraries of ligands for metal separation and recovery. We identify the CO2 loadings and solvents promoting the optimal precipitation of each metal from the dynamic libraries of complexes. We demonstrate the separation of lanthanum and nickel using the exhaust gas of an internal combustion engine vehicle, and show that the three metal constituents of the La2Ni9Co alloys used to manufacture the batteries of electric vehicles can be separated and recovered by successive CO2-induced selective precipitations. Beyond the concept of CO2-sourced multi-level dynamic coordination chemistry, this study provides a potential framework for integrated CO2 capture and use through sustainable processes.

Towards improved boron neutron capture therapy agents: evaluation of in vitro cellular uptake of a glutamine-functionalized carborane.

Sodium borocaptate (BSH) is widely used for boron neutron capture therapy (BNCT) of brain tumors. One drawback is the large uptake by the liver causing a decrease of its availability at the tumor region as well as bringing about toxicity problems. A novel carborane-based compound containing a boron payload very similar to that of BSH has been synthesized and tested on rat glioma (C6) cells, hepatoma tissue culture (HTC) cells, and hepatocytes. The newly synthesized system consists of an o-carborane unit (C(2)B(10)H(11), o-CB) conjugated to a glutamine residue through a proper spacer, namely, o-CB-Gln. As compared with BSH, it showed the same uptake by C6 cells, but a 50% decrease in uptake by HTC cells and an 80% decrease in uptake by healthy hepatocytes. On this basis o-CB-Gln appears an interesting candidate for BNCT of brain tumors as it is expected to have a therapeutic index analogous to that of BSH accompanied by a much lower liver toxicity.