High effectiveness of pure polydopamine in extraction of uranium and plutonium from groundwater and seawater.

Sorption properties of polydopamine (PDA) for uranium and plutonium from an aqueous environment are reported at three different pH values (2, 4 and 6.5-7). In addition to deionized (DI) water, artificial groundwater (GW) and seawater (SW) were used with U uptake close to 100% in each case. PDA polymer has been identified as a material with extremely high sorption capacity Q max ∼500 mg g-1 of the polymer at pH 6.5 and high selectivity for uranium. Similar high sorption properties are revealed for plutonium uptake. PDA-uranyl and PDA-plutonium interactions responsible for the observed adsorption processes have been addressed with a set of experimental techniques including FTIR spectroscopy, electron microscopy and cyclic voltammetry.

Effect of multiwalled carbon nanotubes on the kinetics of the aniline polymerization: the semi-quantitative OCP approach.

We demonstrate applicability of the open-circuit potential (OCP) method for kinetic analysis of the oxidative chemical polymerization of aniline both in clear solution and in dispersions of multiwalled carbon nanotubes (MWCNT). The characteristic points and the shape of the OCP profile are used to estimate the kinetic parameters of the main stages of the known two-step polymerization mechanism of aniline. We have found that the reciprocal values of the duration of the main polymerization stages namely the induction period, pernigraniline (PN) accumulation and reduction of PN with residual aniline are the linear functions of the weight fraction of MWCNT. To compare the kinetic data of the proposed OCP and known approaches the last two stages have been considered as a single heterogeneous stage of emeraldine (EM) formation. The kEM rate constant calculated by the OCP profiles for this EM stage in the solution and dispersion media is in a very good agreement with the known k2 values.

Deep impact of the template on molecular weight, structure, and oxidation state of the formed polyaniline.

In this work we find that polyaniline (PANI), synthesized by aniline chemical polymerization at a surface of template polycarbonate (PC) particles, is significantly different in molecular weight, structural order, oxidation state, and conductivity from a neat PANI. Molecular weight of the PANI phase in the composite (Mw = 158,000) is 1.6 times higher than that of the neat PANI synthesized in the absence of the template particles. Moreover, XRD analysis shows that crystallinity of the PANI phase in the composite is three times higher than that of the neat PANI. Raman spectroscopy indicates that the oxidation level of PANI in the PC/PANI composite is lower than that of the neat PANI. These noticeable changes of the PANI phase properties suggest specific interactions of reagents in the polymerization medium and formed PANI with the template phase as well as an orientation effect of the latter surface. FTIR spectroscopy reveals that hydrogen bonding in the neat doped PANI is weaker than one between -NH- of PANI and C═O of PC at their interface. The discovered differences are supported by the fact that conductivity of the PANI phase in the composite is more than three times higher than that of the neat PANI.