RESUMO
In patients with comorbidities, a large number of wounds become chronic, representing an overwhelming economic burden for healthcare systems. Engineering the microenvironment is a paramount trend to activate cells and burst-healing mechanisms. The extrusion bioprinting of advanced dressings was performed with novel composite bioinks made by blending adipose decellularized extracellular matrix with plasma and human dermal fibroblasts. Rheological and microstructural assessments of the composite hydrogels supported post-printing cell viability and proliferation over time. Embedded fibroblasts expressed steady concentrations of extracellular matrix proteins, including type 1, 3 and 4 collagens and fibronectin. ELISA assessments, multiplex protein arrays and ensuing bioinformatic analyses revealed paracrine activities corresponding to wound-healing activation through the modulation of inflammation and angiogenesis. The two modalities of advanced dressings, differing in platelet number, showed differences in the release of inflammatory and angiogenic cytokines, including interleukin 8 (IL-8), monocyte chemotactic protein 1 (MCP-1), vascular endothelial growth factor (VEGF) and hepatocyte growth factor (HGF). The conditioned media stimulated human-dermal-cell proliferation over time. Our findings open the door to engineering the microenvironment as a strategy to enhance healing.
Assuntos
Bioimpressão , Bandagens , Matriz Extracelular/metabolismo , Humanos , Impressão Tridimensional , Engenharia Tecidual , Alicerces Teciduais/química , Fator A de Crescimento do Endotélio Vascular/metabolismoRESUMO
The decellularized extracellular matrix (ECM) obtained from human and porcine adipose tissue (AT) is currently used to prepare regenerative medicine bio-scaffolds. However, the influence of these natural biomaterials on host immune response is not yet deeply understood. Since macrophages play a key role in the inflammation/healing processes due to their high functional plasticity between M1 and M2 phenotypes, the evaluation of their response to decellularized ECM is mandatory. It is also necessary to analyze the immunocompetence of macrophages after contact with decellularized ECM materials to assess their functional role in a possible infection scenario. In this work, we studied the effect of four decellularized adipose matrices (DAMs) obtained from human and porcine AT by enzymatic or chemical methods on macrophage phenotypes and fungal phagocytosis. First, a thorough biochemical characterization of these biomaterials by quantification of remnant DNA, lipids, and proteins was performed, thus indicating the efficiency and reliability of both methods. The proteomic analysis evidenced that some proteins are differentially preserved depending on both the AT origin and the decellularization method employed. After exposure to the four DAMs, specific markers of M1 proinflammatory and M2 anti-inflammatory macrophages were analyzed. Porcine DAMs favor the M2 phenotype, independently of the decellularization method employed. Finally, a sensitive fungal phagocytosis assay allowed us to relate the macrophage phagocytosis capability with specific proteins differentially preserved in certain DAMs. The results obtained in this study highlight the close relationship between the ECM biochemical composition and the macrophage's functional role.
Assuntos
Tecido Adiposo , Matriz Extracelular , Imunocompetência , Macrófagos/citologia , Macrófagos/fisiologia , Engenharia Tecidual/métodos , Alicerces Teciduais , Tecido Adiposo/citologia , Tecido Adiposo/metabolismo , Animais , Técnicas de Cultura de Células , Matriz Extracelular/química , Coto Gástrico , Humanos , Lipídeos/química , Ativação de Macrófagos , Camundongos , Fagocitose/imunologia , Células RAW 264.7 , Suínos , Alicerces Teciduais/químicaRESUMO
Extracellular matrix hydrogels are considered one of the most suitable biomaterials for tissue regeneration due to their similarity with the extracellular microenvironment of the native tissue. Their properties are dependent on their composition, material concentration, fiber density and the fabrication approaches, among other factors. The encapsulation of immune cells in this kind of hydrogels, both in absence or presence of a pathogen, represents a promising strategy for the development of platforms that mimic healthy and infected tissues, respectively. In this work, we have encapsulated macrophages in 3D hydrogels of porcine decellularized adipose matrices (pDAMs) without and with the Candida albicans fungus, as 3D experimental models to study the macrophage immunocompetence in a closer situation to the physiological conditions and to mimic an infection scenario. Our results indicate that encapsulated macrophages preserve their functionality within these pDAM hydrogels and phagocytose live pathogens. In addition, their behavior is influenced by the hydrogel pore size, inversely related to the hydrogel concentration. Thus, larger pore size promotes the polarization of macrophages towards M2 phenotype along the time and enhances their phagocytosis capability. It is important to point out that encapsulated macrophages in absence of pathogen showed an M2 phenotype, but macrophages coencapsulated with C. albicans can switch towards an M1 inflammatory phenotype to resolve the infection, depending on the fungus quantity. The present study reveals that pDAM hydrogels preserve the macrophage plasticity, demonstrating their relevance as new models for macrophage-pathogen interaction studies that mimic an infection scenario with application in regenerative medicine research.
Assuntos
Candida albicans , Hidrogéis , Suínos , Animais , Macrófagos , PirenosRESUMO
Enthralling evidence of the potential of graphene-based materials for neural tissue engineering is motivating the development of scaffolds using various structures related to graphene such as graphene oxide (GO) or its reduced form. Here, we investigated a strategy based on reduced graphene oxide (rGO) combined with a decellularized extracellular matrix from adipose tissue (adECM), which is still unexplored for neural repair and regeneration. Scaffolds containing up to 50 wt% rGO relative to adECM were prepared by thermally induced phase separation assisted by carbodiimide (EDC) crosslinking. Using partially reduced GO enables fine-tuning of the structural interaction between rGO and adECM. As the concentration of rGO increased, non-covalent bonding gradually prevailed over EDC-induced covalent conjugation with the adECM. Edge-to-edge aggregation of rGO favours adECM to act as a biomolecular physical crosslinker to rGO, leading to the softening of the scaffolds. The unique biochemistry of adECM allows neural stem cells to adhere and grow. Importantly, high rGO concentrations directly control cell fate by inducing the differentiation of both NE-4C cells and embryonic neural progenitor cells into neurons. Furthermore, primary astrocyte fate is also modulated as increasing rGO boosts the expression of reactivity markers while unaltering the expression of scar-forming ones.
Assuntos
Grafite , Engenharia Tecidual , Grafite/química , Neurônios , Matriz Extracelular/químicaRESUMO
In bone engineering, the adhesion, proliferation and differentiation of mesenchymal stromal cells rely on signaling from chemico-physical structure of the substrate, therefore prompting the design of mimetic "extracellular matrix"-like scaffolds. In this study, three-dimensional porous poly-L-lactic acid (PLLA)-based scaffolds have been mixed with different components, including single walled carbon nanotubes (CNT), micro-hydroxyapatite particles (HA), and BMP2, and treated with plasma (PT), to obtain four different nanocomposites: PLLA + CNT, PLLA + CNTHA, PLLA + CNT + HA + BMP2 and PLLA + CNT + HA + PT. Adult bone marrow mesenchymal stromal cells (MSCs) were derived from the femur of orthopaedic patients, seeded on the scaffolds and cultured under osteogenic induction up to differentiation and mineralization. The release of specific metabolites and temporal gene expression profiles of marrow-derived osteoprogenitors were analyzed at definite time points, relevant to in vitro culture as well as in vivo differentiation. As a result, the role of the different biomimetic components added to the PLLA matrix was deciphered, with BMP2-added scaffolds showing the highest biomimetic activity on cells differentiating to mature osteoblasts. The modification of a polymeric scaffold with reinforcing components which also work as biomimetic cues for cells can effectively direct osteoprogenitor cells differentiation, so as to shorten the time required for mineralization.
Assuntos
Regeneração Óssea , Ácido Láctico/química , Células-Tronco Mesenquimais/citologia , Nanocompostos/química , Polímeros/química , Engenharia Tecidual/métodos , Alicerces Teciduais/química , Idoso , Materiais Biomiméticos/química , Materiais Biomiméticos/farmacologia , Regeneração Óssea/efeitos dos fármacos , Técnicas de Cultura de Células/instrumentação , Técnicas de Cultura de Células/métodos , Diferenciação Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Células Cultivadas , Feminino , Regeneração Tecidual Guiada/instrumentação , Regeneração Tecidual Guiada/métodos , Humanos , Ácido Láctico/farmacologia , Masculino , Células-Tronco Mesenquimais/efeitos dos fármacos , Células-Tronco Mesenquimais/fisiologia , Pessoa de Meia-Idade , Osteoblastos/citologia , Osteoblastos/efeitos dos fármacos , Osteoblastos/fisiologia , Osteogênese/efeitos dos fármacos , Poliésteres , Polímeros/farmacologia , Transdução de Sinais/efeitos dos fármacosRESUMO
In vitro cell culture studies are common in the cancer research field, and reliable biomimetic 3D models are needed to ensure physiological relevance. In this manuscript, we hypothesized that decellularized xenograft tumors can serve as an optimal 3D substrate to generate a top-down approach for in vitro tumor modeling. Multiple tumor cell lines were xenografted and the formed solid tumors were recovered for their decellularization by several techniques and further characterization by histology and proteomics techniques. Selected decellularized tumor xenograft samples were seeded with the HCC1806 human triple-negative breast cancer (TNBC) basal-like subtype cell line, and cell behavior was compared among them and with other control 2D and 3D cell culture methods. A soft treatment using Freeze-EDTA-DNAse allows proper decellularization of xenografted tumor samples. Interestingly, proteomic data show that samples decellularized from TNBC basal-like subtype xenograft models had different extracellular matrix (ECM) compositions compared to the rest of the xenograft tumors tested. The in vitro recellularization of decellularized ECM (dECM) yields tumor-type-specific cell behavior in the TNBC context. Data show that dECM derived from xenograft tumors is a feasible substrate for reseeding purposes, thereby promoting tumor-type-specific cell behavior. These data serve as a proof-of-concept for further potential generation of patient-specific in vitro research models.
RESUMO
Engineered 3D human adipose tissue models and the development of physiological human 3D in vitro models to test new therapeutic compounds and advance in the study of pathophysiological mechanisms of disease is still technically challenging and expensive. To reduce costs and develop new technologies to study human adipogenesis and stem cell differentiation in a controlled in vitro system, here we report the design, characterization, and validation of extracellular matrix (ECM)-based materials of decellularized human adipose tissue (hDAT) or bovine collagen-I (bCOL-I) for 3D adipogenic stem cell culture. We aimed at recapitulating the dynamics, composition, and structure of the native ECM to optimize the adipogenic differentiation of human mesenchymal stem cells. hDAT was obtained by a two-enzymatic step decellularization protocol and post-processed by freeze-drying to produce 3D solid foams. These solid foams were employed either as pure hDAT, or combined with bCOL-I in a 3:1 proportion, to recreate a microenvironment compatible with stem cell survival and differentiation. We sought to investigate the effect of the adipogenic inductive extracellular 3D-microenvironment on human multipotent dental pulp stem cells (hDPSCs). We found that solid foams supported hDPSC viability and proliferation. Incubation of hDPSCs with adipogenic medium in hDAT-based solid foams increased the expression of mature adipocyte LPL and c/EBP gene markers as determined by RT-qPCR, with respect to bCOL-I solid foams. Moreover, hDPSC capability to differentiate towards adipocytes was assessed by PPAR-γ immunostaining and Oil-red lipid droplet staining. We found out that both hDAT and mixed 3:1 hDAT-COL-I solid foams could support adipogenesis in 3D-hDPSC stem cell cultures significantly more efficiently than solid foams of bCOL-I, opening the possibility to obtain hDAT-based solid foams with customized properties. The combination of human-derived ECM biomaterials with synthetic proteins can, thus, be envisaged to reduce fabrication costs, thus facilitating the widespread use of autologous stem cells and biomaterials for personalized medicine.
RESUMO
The improvement of culturing techniques to model the environment and physiological conditions surrounding tumors has also been applied to the study of extracellular vesicles (EVs) in cancer research. EVs role is not only limited to cell-to-cell communication in tumor physiology, they are also a promising source of biomarkers, and a tool to deliver drugs and induce antitumoral activity. In the present review, we have addressed the improvements achieved by using 3D culture models to evaluate the role of EVs in tumor progression and the potential applications of EVs in diagnostics and therapeutics. The most employed assays are gel-based spheroids, often utilized to examine the cell invasion rate and angiogenesis markers upon EVs treatment. To study EVs as drug carriers, a more complex multicellular cultures and organoids from cancer stem cell populations have been developed. Such strategies provide a closer response to in vivo physiology observed responses. They are also the best models to understand the complex interactions between different populations of cells and the extracellular matrix, in which tumor-derived EVs modify epithelial or mesenchymal cells to become protumor agents. Finally, the growth of cells in 3D bioreactor-like systems is appointed as the best approach to industrial EVs production, a necessary step toward clinical translation of EVs-based therapy.
RESUMO
Macrophages, cells effective in sensing, internalizing and killing Candida albicans, are intertwined with the extracellular matrix (ECM) through different signals, which include the release of specific cytokines. Due to the importance of these interactions, the employment of in vitro models mimicking a fungal infection scenario is essential to evaluate the ECM effects on the macrophage response. In this work, we have analyzed the effects of human and porcine decellularized adipose matrices (DAMs), obtained by either enzymatic or organic solvent treatment, on the macrophage/Candida albicans interface. The present study has allowed us to detect differences on the activation of macrophages cultured on either human- or porcine-derived DAMs, evidencing changes in the macrophage actin cytoskeleton, such as distinct F-actin-rich membrane structures to surround the pathogen. The macrophage morphological changes observed on these four DAMs are key to understand the defense capability of these cells against this fungal pathogen. This work has contributed to the knowledge of the influence that the extracellular matrix and its components can exert on macrophage metabolism, immunocompetence and capacity to respond to the microenvironment in a possible infection scenario.
RESUMO
Big advances are being achieved in the design of new implantable devices with enhanced properties. For example, synthetic porous three-dimensional structures can mimic the architecture of the tissues, and serve as templates for cell seeding. In addition, polymeric nanoparticles are able to provide a programmable and sustained local delivery of different types of biomolecules. In this study novel alternative scaffolds with controlled bioactive properties and architectures are presented. Two complementary approaches are described. Firstly, scaffolds with nanogels as active controlled release devices incorporated inside the three-dimensional structure are obtained using the thermally induced phase separation (TIPS) method. Secondly, a novel coating method using the spraying technique to load these nanometric crosslinked hydrogels on the surface of two-dimensional (2D) and three-dimensional (3D) biodegradable scaffolds is described. The scanning electron microscopy (SEM) images show the distribution of the nanogels on the surface of different substrates and also inside the porous structure of poly-alpha-hydroxy ester derivative foams. Both of them are compared in terms of manufacturability, dispersion and other processing variables.
Assuntos
Materiais Biocompatíveis/química , Cristalização/métodos , Implantes de Medicamento/química , Ácido Láctico/química , Nanomedicina/métodos , Nanoestruturas/química , Polietilenoglicóis/química , Polietilenoimina/química , Polímeros/química , Absorção , Composição de Medicamentos/métodos , Teste de Materiais , Nanogéis , Nanoestruturas/ultraestrutura , Tamanho da Partícula , Poliésteres , Propriedades de SuperfícieRESUMO
We developed biodegradable polymeric coatings loaded with increasing amounts of dexamethasone on composites based on polylactic acid and Mg particles for bone repair. Incorporation of Mg particles into the polymeric matrix improves the compressive behaviour of the polymer. Mg-containing composites release Mg2+ ions into the culture medium and improve mesenchymal stem cell (MSC) viability, enhance their osteogenic potential and promote the release of angiogenic factors. Dexamethasone-loaded coatings deposited on composites delay Mg2+ ion dissolution while releasing controlled amounts of the drug, which are highly dependent on initial payload. Release kinetic of dexamethasone from the coatings exhibits a fast initial release of the drug followed by a slower secondary release. Bioactivity of the released dexamethasone was explored by monitoring dose-dependent responses of MSCs and macrophages. Biological effects exerted by the released drug are similar to those observed in cells treated with solutions of the glucocorticoid, indicating that the method employed for inclusion of dexamethasone into the coatings does not impair its bioactive behaviour. Culturing MSCs on dexamethasone-releasing coatings enhances extracellular matrix production and initial induction to osteogenic commitment as a function of drug payload. Dexamethasone incorporated into the coatings presents anti-inflammatory activity, as shown by the decrease in the production of cytokines and angiogenic factors by macrophages and MSCs. Deposition of dexamethasone-releasing coatings on polymer/Mg composites appears to be a promising approach to delay composite degradation at the early stage of implantation and may be useful to attenuate inflammation and adverse foreign body reactions.
Assuntos
Materiais Revestidos Biocompatíveis/química , Dexametasona/química , Células-Tronco Mesenquimais/efeitos dos fármacos , Osteogênese/efeitos dos fármacos , Anti-Inflamatórios/química , Células da Medula Óssea/citologia , Sobrevivência Celular , Força Compressiva , Análise Custo-Benefício , Citocinas/metabolismo , Dexametasona/administração & dosagem , Reação a Corpo Estranho , Glucocorticoides/química , Humanos , Inflamação , Macrófagos/metabolismo , Magnésio/química , Microscopia Confocal , Neovascularização Patológica , Poliésteres/química , Ácido Poliglicólico/química , Polímeros/química , Estresse MecânicoRESUMO
There is an evident clinical need for artificial bone restorative materials. In this respect, novel composites based on poly(L-lactic acid) (PLLA) have been described. The bone response of such polymer-based composites is usually improved by the addition of bone morphogenetic protein-2 (BMP-2). However, released BMP-2 is cleared almost immediately from the site of implantation by diffusion, whereas a prolonged retention of BMP-2 onto the scaffold has been suggested to be more favourable. Besides the ability to improve the mechanical strength and osteoconductivity of polymeric scaffolds, both carbon nanotubes (CNTs) and microhydroxyapatite (µHA) have been described to facilitate such retention of BMP-2 when incorporated into a composite scaffold. Therefore, in the current study, radiolabelled BMP-2 was loaded onto plain PLLA and composite PLLA-CNT-µHA scaffolds. Subsequently, the scaffolds were implanted subcutaneously for 5 weeks in rats and BMP-2 release was measured. Release started with an initial phase of quick release, followed by a gradual release of BMP-2. Both scaffold types comprised the same in vivo release properties for BMP-2. The bioactivity of the BMP-2 remained unaltered. It can be concluded that incorporated CNTs and µHA did not affect BMP-2 release from composite scaffold materials.
Assuntos
Apatitas/farmacologia , Proteína Morfogenética Óssea 2/metabolismo , Ácido Láctico/farmacologia , Nanotubos/química , Polímeros/farmacologia , Alicerces Teciduais/química , Fosfatase Alcalina/metabolismo , Animais , Bioensaio , Humanos , Implantes Experimentais , Radioisótopos do Iodo , Masculino , Microscopia Eletrônica de Varredura , Poliésteres , Cintilografia , Ratos , Ratos WistarRESUMO
In bone tissue engineering composite materials have been introduced, combining a degradable polymer matrix with, for instance, carbon nanotubes (CNTs) to improve mechanical properties or with microhydroxyapatite (µHA) to improve osteoconduction. The addition of bone morphogenetic protein-2 (BMP-2) can further improve the biological response to the material. However, the influence of such an elaborate composite formation on osteoprogenitor cells is unknown. To examine this, rat bone marrow (RBM) cells were cultured on porous poly-L-lactic acid and composite scaffolds, with or without added BMP-2. Cell proliferation and differentiation were studied using DNA, alkaline phosphatase and scanning electron microscopic analysis. Further, genetic profiles were examined by microarray investigation. Results showed that the composite scaffold had no significant effect on the proliferation of RBM cells, but indicated a negative effect on cell differentiation. The addition of BMP-2 also had no significant effect on the proliferation of RBM cells, but differentiation towards the osteogenic lineage was confirmed. In the arrays results, the addition of BMP-2 alone led to the expression of genes involved in (minor) inflammation. The composite scaffold, and even more distinctly the combination of the composite scaffold with BMP-2, led to the expression of genes, based on gene ontology, connected to tumorigenesis. Therefore, CNT- and µHA-containing composite materials are not recommended as a bone restorative material.