Effect of treatment of transverse maxillary deficiency using rapid palatal expansion on oral health-related quality of life in children: complementary results for a controlled clinical trial.

OBJECTIVE: To evaluate the effect of rapid palatal expansion (RPE) using Haas-type expanders on children's oral health-related quality of life (OHRQOL) and compare said effect with that previously reported for the use of Hyrax-type expanders. MATERIALS AND METHODS: Forty participants aged 8-10 years with transverse maxillary deficiency were treated using Haas appliances. OHRQOL was measured using the CPQ8 - 10 before RPE, during RPE (T1), at the end of RPE (T2), and 1 month after appliance removal (T3). Generalized mixed models were fitted to assess the effect of the Haas-type expander compared to previously collected data (a nontreated and a Hyrax-type expander-treated group). RESULTS: RPE with Haas-type appliances had a negative impact on overall OHRQOL at T1 and T2 (P = 0.001), and a positive impact at T3 (P = 0.001). The Haas-type expander had a significantly greater negative impact on OHRQOL than the Hyrax-type appliance during RPE. At T1, overall scores using the Haas-type expander were 1.08 times the scores using the Hyrax-type expander (i.e., 8% increase; 95% CI, 1.01-1.17; P = 0.033). Patients using the Haas appliance had 1.24 times the scores of those using Hyrax-type devices for the oral symptoms domain at T1 (i.e., 24% increase; 95% CI, 1.06-1.46; P = 0.009). CONCLUSIONS: Correction of the transverse maxillary deficiency by RPE using the Haas appliance in children 8-10 years improves OHRQOL. The Haas- and Hyrax-type devices temporarily worsen OHRQOL during treatment, however, the negative impact is less with the Hyrax-type expander than with the Haas-type expander, because it causes fewer negative oral symptoms. CLINICAL RELEVANCE: From a patient-centered perspective, the use of the Hyrax over the Haas appliance may be suggested as it causes less negative oral symptoms during use.

Dehiscence and buccal bone thickness after rapid maxillary expansion in young patients with unilateral cleft lip and palate.

INTRODUCTION: The present study aimed to evaluate the consequences of rapid maxillary expansion in the buccal bone thickness and dehiscence of subjects with unilateral cleft lip and palate. METHODS: This prospective cohort study consisted of 30 participants, 20 males and 10 females, between 8 and 15 years old. Participants were allocated into 3 groups, according to the type of maxillary constriction, and were treated with different types of expanders: G1, hyrax; G2, fan-type; G3, inverted mini-hyrax. Cone-beam computed tomography scans were performed immediately before treatment and after 90 days of retention. Linear measurements were obtained by the same calibrated and blinded examiner. RESULTS: An average of 0.8 mm decrease in buccal bone thickness (P <0.001) and a 0.5 mm increase in dehiscence (P <0.001) were observed. There was no significant difference between the cleft and noncleft side for all variables (P >0.05), as there was no significant difference between groups (P >0.05). CONCLUSION: The findings in this study allow the conclusion that the orthopedic forces of rapid maxillary expansion lead to a decrease in the posterior buccal bone volume in unilateral cleft lip and palate patients.

Does surgically assisted maxillary expansion improve obstructive sleep apnoea in adults? A systematic review and meta-analysis.

Introduction The aim of this systematic review and meta-analysis was to evaluate the effects of maxillary expansion on adults with obstructive sleep apnoea (OSA).Methods Electronic searches up to July 2021 in eight electronic databases were conducted. Study selection, data extraction, risk of bias evaluation using ROBINS-I, quality of evidence assessment using GRADE and meta-analyses were performed.Results The electronic searches yielded 1,007 studies. Following the application of the eligibility criteria, 15 articles were fully read and five studies were included. The studies evaluated the effects of surgically assisted rapid maxillary expansion in adults with OSA. The meta-analysis demonstrated an improvement in Apnoea-Hypopnea Index (AHI) (MD = -9.91, CI = -14.57 to -5.25), Oxygen Desaturation Index (ODI) (MD = -7.95, CI = -12.23 to -3.67), and Epworth Sleepiness Scale (ESS) (MD = -4.40, CI = -6.39 to -2.40). ROBINS-I indicated serious, no information and critical risk of bias for the included studies. The quality of the evidence was very low.Conclusion The findings herein suggest that maxillary expansion could improve OSA in adults in the short term.

Long-term stability of a Class III malocclusion with severe anterior open bite and bilateral posterior crossbite in a hyperdivergent patient.

Anterior open bite malocclusion is generally associated with several causes. This case report describes the 2-phase treatment of a 13-year-old boy with a Class III malocclusion, severe anterior open bite, and bilateral posterior crossbite treated without surgical intervention. An orthopedic approach was performed in phase 1 with a hyrax-type palatal expander, followed by maxillary protraction with a facemask for a 10-month period to promote the correction of transverse and sagittal deviations. In phase 2, a comprehensive orthodontic approach using fixed preadjusted appliances associated with intermaxillary elastics was performed. These approaches, combined with good patient compliance, established a functional and esthetic occlusal relationship, normal overjet and overbite, and a well-balanced facial appearance. The 4.5-year follow-up indicated that treatment results were stable.

The impact of rapid maxillary expansion on maxillary first molar root morphology of cleft subjects.

OBJECTIVES: The aim of this prospective cohort study was to determine the effects of rapid maxillary expansion (RME) on the first molar roots of cleft lip and palate subjects along different root development stages. MATERIALS AND METHODS: Thirty participants with unilateral cleft lip and palate were divided into three groups (n = 10), according to the type of expander used: Hyrax, iMini and Fan-type. A cone beam CT scan was performed before (T1) and 3 months after stabilization of the appliance (T2). Measurements of root lengths of the first permanent maxillary molars were taken to evaluate root development and external apical root resorption (EARR). RESULTS: Roots presenting open apexes before treatment exhibited a statistically significant increase in root length after treatment (P < .001). Conversely, there were no significant changes in the root length of roots that had closed apexes at the beginning of treatment (P > .05). Furthermore, there were no differences among groups, or correlation between cleft side and gender was found vis-à-vis to changes in the root length (p > .05). CONCLUSIONS: Orthopaedic forces of RME were neither able to interrupt the root development process nor to cause EARR in cleft subjects. CLINICAL RELEVANCE: As the RME is the most common orthodontic procedure in patients with cleft lip and palate, understanding its impact on dental structures is of fundamental importance.

Successful and stable orthodontic camouflage of a mandibular asymmetry with sliding jigs.

The purpose of this paper is to present and discuss a simple and low-cost clinical approach to correct an asymmetric skeletal Class III combined to an extensive dental open bite that significantly compromised the occlusal function and smile aesthetics of an adult male patient. The patient did not accept the idealistic surgical-orthodontic treatment option, neither the use of temporary anchorage devices to facilitate the camouflage of the asymmetrical skeletal Class III/open bite. Therefore, a very simple and inexpensive biomechanical approach using sliding jigs in the mandibular arch was implemented as the compensatory treatment of the malocclusion. Although minor enhancements in facial aesthetics were obtained, the occlusal function and dental aesthetics were significantly improved. Furthermore, the patient was very satisfied with his new smile appearance. Some advantages of this treatment option included the small invasiveness and the remarkably low financial costs involved. Moreover, the final results fulfilled all realistic treatment objectives and the patient's expectations. Results remained stable 5 years post-treatment demonstrating that excellent results can be obtained when simple and low cost, but well-controlled mechanics are conducted.

Mandibular canine intrusion with the segmented arch technique: A finite element method study.

INTRODUCTION: Mandibular canines are anatomically extruded in approximately half of the patients with a deepbite. Although simultaneous orthodontic intrusion of the 6 mandibular anterior teeth is not recommended, a few studies have evaluated individual canine intrusion. Our objectives were to use the finite element method to simulate the segmented intrusion of mandibular canines with a cantilever and to evaluate the effects of different compensatory buccolingual activations. METHODS: A finite element study of the right quadrant of the mandibular dental arch together with periodontal structures was modeled using SolidWorks software (Dassault Systèmes Americas, Waltham, Mass). After all bony, dental, and periodontal ligament structures from the second molar to the canine were graphically represented, brackets and molar tubes were modeled. Subsequently, a 0.021 × 0.025-in base wire was modeled with stainless steel properties and inserted into the brackets and tubes of the 4 posterior teeth to simulate an anchorage unit. Finally, a 0.017 × 0.025-in cantilever was modeled with titanium-molybdenum alloy properties and inserted into the first molar auxiliary tube. Discretization and boundary conditions of all anatomic structures tested were determined with HyperMesh software (Altair Engineering, Milwaukee, Wis), and compensatory toe-ins of 0°, 4°, 6°, and 8° were simulated with Abaqus software (Dassault Systèmes Americas). RESULTS: The 6° toe-in produced pure intrusion of the canine. The highest amounts of periodontal ligament stress in the anchor segment were observed around the first molar roots. This tooth showed a slight tendency for extrusion and distal crown tipping. Moreover, the different compensatory toe-ins tested did not significantly affect the other posterior teeth. CONCLUSIONS: The segmented mechanics simulated in this study may achieve pure mandibular canine intrusion when an adequate amount of compensatory toe-in (6°) is incorporated into the cantilever to prevent buccal and lingual crown tipping. The effects on the posterior anchorage segment were small and initially concentrated on the first molar.

An alternative clinical approach to achieve greater anterior than posterior maxillary expansion in cleft lip and palate patients.

Cleft lip and palate patients commonly present maxillary constriction, particularly in the anterior region. The aim of this case report was to describe an alternative clinical approach that used a smaller Hyrax screw unconventionally positioned to achieve greater anterior than posterior expansion in patients with complete unilateral cleft lip and palate. The idea presented here is to take advantage of a reduced dimension screw to position it anteriorly. When only anterior expansion was needed (patient 1), the appliance was soldered to the first premolar bands and associated to a transpalatal arch cemented to the first molars. However, when overall expansion was required (patient 2), the screw was positioned anteriorly, but soldered to the first molar bands. Intercanine, premolar, and first molar widths were measured on dental casts with a digital caliper. Pre-expansion and postexpansion radiographs and tomographies were also evaluated. A significant anterior expansion and no intermolar width increase were registered in the first patient. Although patient 2 also presented a greater anterior than posterior expansion, a noteworthy expansion occurred at the molar region. The alternative approach to expand the maxilla in cleft patients reported here caused greater anterior than posterior expansion when the Mini-Hyrax was associated to a transpalatal arch, and its reduced dimension also minimized discomfort and facilitated hygiene.

Tooth displacement in shortened dental arches: a three-dimensional finite element study.

STATEMENT OF PROBLEM: Some patients may opt for a prosthetic rehabilitation without replacing all missing teeth, finishing treatment with a reduced dental arch. This choice may be due to biologic reasons or financial restrictions. It is unclear if a reduced dental arch functions as well as a complete dental arch. PURPOSE: The purpose of this study was to analyze whether shortened dental arches could result in tooth displacement. MATERIAL AND METHODS: Four different 3-dimensional maxillary and mandibular arches with different levels of arch length reduction were created. In all models, anatomic structures that represent the temporomandibular joint, cortical and cancellous bone, enamel, dentin, and periodontal ligament were modeled. Mechanical properties were attributed to each anatomic component, and a total occlusal load of 100 N on masseter, temporal, and medial pterygoid muscles was simulated for each model. The MSC. Patran software was used for the preprocessing and postprocessing of the biomechanical analysis of the models. One complete dental arch was used as the control. RESULTS: The simulations showed that shortened dental arches presented greater tooth displacements than those found in a complete dental arch. The changes in mandibular tooth position were greater than those observed in the maxillary arches. In finite element models 1 and 2, the largest maxillary displacements were found for posterior teeth. CONCLUSIONS: Decreasing numbers of occlusal units resulted in increasing amounts of displacements of the remaining teeth, which may compromise dental stability in patients with shortened dental arches.

Dentoskeletal effects of 3 maxillary expanders in patients with clefts: A cone-beam computed tomography study.

INTRODUCTION: The purpose of this study was to evaluate the skeletal and dental changes in the maxillae of patients with clefts treated with 3 expanders: hyrax, fan-type, and inverted mini-hyrax supported on the first premolars. METHODS: Thirty patients with unilateral cleft lip and palate with transverse maxillary deficiency were divided into 3 groups, according to the type of expander that they used. Cone-beam computed tomography images were taken before and 3 months after expansion, and the paired t test was used to evaluate the changes in each group. RESULTS: The subjects in the inverted mini-hyrax group showed significant forward displacement of the maxilla (P <0.05). On the transversal plane, the hyrax group showed greater expansion in the posterior region than in the anterior region (P <0.05). However, the fan-type and the inverted mini-hyrax groups showed significantly greater maxillary expansion anteriorly than posteriorly (P <0.05). There was a greater tendency for buccal inclination of the supporting teeth when the fan-type was used. The cleft and the noncleft sides expanded symmetrically with all appliances, and there was no difference in dental tipping between these sides (P >0.05). CONCLUSIONS: The hyrax expander showed better results for cleft patients requiring anterior and posterior maxillary expansion. The inverted mini-hyrax most effectively restricted posterior expansion, optimizing anterior expansion without causing as much buccal tipping of the supporting teeth as did the fan-type.

Perception of laypersons and dental professionals and students as regards the aesthetic impact of gingival plastic surgery.

OBJECTIVE: To evaluate the degree of perception of laypersons, professionals, and dental students, regarding the aesthetic appearance of the smile in cases of gingival plastic surgery of the maxilla for correction of a gingival smile, by examining alterations in photographs. MATERIALS/METHODS: Alterations were made to an extraoral front-view-photograph of a gingival smile in normal occlusion, by gingival recontouring of the maxilla, simulating a gingival plastic surgery procedure to diminish gingival exposure. For this purpose, specific image-manipulation program (Adobe-Photoshop-Software-CS3) was used. Images were printed on photographic-paper, attached to questionnaire, distributed among laypersons, professionals, and dental students to evaluate degree of aesthetics (n = 150). To evaluate degree of aesthetics, an attractiveness scale was used, with 0 representing hardly attractive, 5 for attractive, and 10 for very attractive. Differences between examiners were examined by Mann-Whitney test. All the statistics were performed with a confidence level of 95 per cent. RESULTS: Both dental professionals and students and laypersons were capable of identifying alterations resulting from gingival plastic surgery. In all evaluated groups, they demonstrated that large gingival extension does not always affect aesthetic appearance of the smile, and maxillary incisors not being much visualized is characterized as hardly attractive, with statistically lower scores being attributed (P < 0.05). CONCLUSIONS: According to aesthetic parameters, the presence of the gingiva is important in the composition of the smile, however, only when exposed to small extent.

The effect of micro-osteoperforations on the rate of maxillary incisors' retraction in orthodontic space closure: a randomized controlled clinical trial.

BACKGROUND: This single-centered randomized controlled clinical trial aimed to evaluate the effectiveness of micro-osteoperforations (MOPs) in accelerating the orthodontic retraction of maxillary incisors. METHODS: Forty-two patients aged 16-40 were recruited and randomly assigned into two groups, one which underwent MOPs (MOPG) in the buccal and palatal region of all maxillary incisors immediately before the start of retraction and one which did not (CG). Eligibility criteria included the orthodontic need for maxillary first premolars extraction and space closure in two phases. The primary outcome of the study consisted of measuring the rate of space closure and, consequently, the rate of incisors' retraction using digital model superimposition 14 days later and monthly thereafter for the next 4 months. The secondary outcomes included measuring anchorage loss, central incisors' inclination, and root length shortening, analyzed using cone beam computed tomography scans acquired before retraction and 4 months after retraction. Randomization was performed using QuickCalcs software. While clinical blinding was not possible, the image's examinator was blinded. RESULTS: Twenty-one patients were randomly assigned to each group. However, due to various reasons, a total of 37 patients (17 male and 20 female) were analyzed (mean age: 24.3 ± 8.1 years in the MOPG; 22.2 ± 4.2 years in the CG) during the trial. No statistically significant difference was found between the MOPG and the CG regarding the incisors' retraction measured at different time points at the incisal border (14 days, 0.4 mm vs. 0.5 mm; 1 month, 0.79 mm vs. 0.77 mm; 2 months, 1.47 mm vs. 1.41 mm; 3 months, 2.09 mm vs. 1.88 mm; 4 months, 2.62 mm vs. 2.29 mm) and at the cervical level (14 days, 0.28 mm vs. 0.30 mm; 1 month, 0.41 mm vs. 0.32 mm; 2 months, 0.89 mm vs. 0.61 mm; 3 months, 1.36 mm vs. 1.10 mm; 4 months, 1.73 mm vs. 1.39 mm). Similarly, no statistically significant differences were detected in the space closure, anchorage loss, central incisors' inclination, and radicular length between groups. No adverse effect was observed during the trial. CONCLUSIONS: MOPs did not accelerate the retraction of the maxillary incisors, nor were they associated with greater incisor inclination or root resorption. Trial registration ClinicalTrials.gov NCT03089996. Registered 24 March 2017- https://clinicaltrials.gov/ct2/show/NCT03089996 .

Mechanical evaluation of orthodontic mini-implants of different lengths.

PURPOSE: The current study sought to evaluate the influence of the length of the mini-implant on its mechanical properties. MATERIALS AND METHODS: A total of 405 mini-implants from the same manufacturer were divided into 3 groups (n = 135) according to whether they were 6, 8, or 10 mm in length. An insertion torque test was performed using minipig osseous tissue of different cortical thicknesses (1 mm to 6 mm). To assess the maximum fracture torque during insertion, the mini-implants were inserted into swine femoral cortical bone. A digital torque gauge was positioned perpendicularly to the bone surface to measure this parameter. To evaluate the deformation and subsequent fracture due to a bending force, the mini-implants were subjected to loading orthogonal to their length at a speed of 0.5 mm per minute. RESULTS: The insertion torque increased with increasing screw length and increasing cortical bone thickness. There were no statistically significant differences between the different implant lengths with respect to the insertion torque force required for fracture (P > .05) or the forces required for deformation (P > .05) and fracture (P > .05) when submitted to flexion. CONCLUSIONS: Increasing the length of the screw does not increase its mechanical strength, but can efficiently reinforce the initial stability of mini-implants.

Interdisciplinary treatment of a class III patient with congenitally absent maxillary lateral incisors.

UNLABELLED: The purpose of this paper is to present a case report of an adult Class III patient presenting bilateral congenitally missing maxillary lateral incisors that compromised occlusal function as well as smile and facial esthetics. After the interdisciplinary diagnosis, spaces for prosthetic substitution were opened with the help of miniscrews. The orthodontic therapy achieved a better dental relationship, and the final interdisciplinary treatment results represented a significant improvement in function and both dental and facial esthetics. CLINICAL SIGNIFICANCE: The interdisciplinary treatment of orthodontics and restorative dentistry is very important because the two complement each other in search of the best for the patient. This case demonstrates very well that where orthodontics provided the best tooth position prior to implant placement and restorations.

Glossectomy as an adjunct to correct an open-bite malocclusion with shortened maxillary central incisor roots.

A young man, 19 years of age, with the chief complaint of an anterior open bite, came for orthodontic treatment with a skeletal Class I relationship, anterior open bite, shortened maxillary incisor roots, and relative macroglossia. The malocclusion was treated by extracting the maxillary first premolars and using a fixed edgewise appliance. A partial glossectomy was performed before the orthognathic surgery with a 3-piece segmental LeFort I mandibular setback, and advancement was achieved with a reduction genioplasty. A functional and esthetic occlusion with an improved facial profile was established, and the apex of the maxillary left central incisor became slightly rounded after prolonged and significant tooth movement. Four years after treatment, there was occlusal stability of the results, and no further root shortening was observed.

Influence of the expansion screw height on the dental effects of the hyrax expander: a study with finite elements.

INTRODUCTION: Our objective was to evaluate the influence of the expansion screw height of a hyrax expander on the degree of dental inclination during rapid maxillary expansion by using the finite element method. METHODS: The hyrax expander and the maxillary arch were modeled by using Solidworks software (Dassault Systèmes, Paris, France). Three distinct finite element method models were created by simulating different screw heights relative to the plane that intersected the center of resistance of the maxillary first molars. These 3 relative positions were 10 mm below the maxillary first molars' center of resistance, at the same level as the maxillary first molars' center of resistance, and 10 mm above the maxillary first molars' center of resistance. The initial activation of the expanders was simulated, and tooth displacements for each finite element method model were registered in the buccolingual, corono-apical, and mesiodistal directions. RESULTS: The simulations tested showed that the 3 hyrax screw heights had different dental tipping tendencies. When the screw was simulated below the maxillary first molars' center of resistance, buccal tipping of the crowns and lingual tipping of the roots were registered. This tendency decreased when the screw was simulated at the same level as the maxillary first molars' center of resistance. However, when the screw was simulated above the maxillary first molars' center of resistance, the tipping tendency was inverted, with the crowns displaying lingual tipping and the roots displaying buccal tipping. CONCLUSIONS: These findings might explain the importance of carefully planning the height of the hyrax expander screw, since, depending on this position, different tooth movements can be achieved. From an orthopedic perspective, the ideal screw position might be slightly above the maxillary first molars' center of resistance; this would generate less dental tipping.

Two-phase orthodontic treatment of a complex malocclusion: giving up efficiency in favor of effectiveness, quality of life, and functional rehabilitation?

The interceptive orthodontic treatment of patients with complex dentofacial abnormalities is frequently inefficient and produces less than ideal outcomes. Therefore, postponing therapy to a single-phase surgical-orthodontic approach might be considered a reasonable option. However, other relevant aspects of the patient's quality of life, such as possible psychosocial problems and functional impairments, should also be considered before deciding whether to intercept a severe dentofacial malocclusion while the patient is still growing, or wait and treat later. This case report describes the nonsurgical treatment of a young patient with a severe Class III open-bite malocclusion associated with a cervical cystic lymphangioma. Despite the poor interceptive therapy prognosis, a 2-phase approach was effective. A reflection about giving up efficiency in favor of effectiveness, functional rehabilitation, and the patient's quality of life is included.

Effects of enamel deproteinization on bracket bonding with conventional and resin-modified glass ionomer cements.

The objective of this study was to test the effects of enamel deproteinization on bracket bonding with conventional and resin-modified glass ionomer cement (RMGIC). One hundred premolars, extracted for orthodontic reasons, were divided into five groups (n = 20). Group 1 (control): enamel was etched with 35 per cent phosphoric acid, a thin layer of adhesive was applied, and the brackets were bonded with Transbond XT. Group 2: enamel was etched with 10 per cent polyacrylic acid and the brackets were bonded with conventional glass ionomer cement (GIC). Group 3: enamel was treated with 5.25 per cent NaOCl, etched with 10 per cent polyacrylic acid, and the brackets were bonded with conventional GIC. Group 4: enamel was etched with 10 per cent polyacrylic acid and the brackets were bonded with RMGIC. Group 5: enamel was treated with 5.25 per cent NaOCl, etched with 10 per cent polyacrylic acid, and the brackets were bonded with RMGIC. The teeth were stored in distilled water for 24 hours before they were submitted to shear testing. The results demonstrated that bond strength values of group 1 (17.08 ± 6.39 MPa) were significantly higher in comparison with the other groups. Groups 2 (3.43 ± 1.94 MPa) and 3 (3.92 ± 1.57 MPa) presented values below the average recommended in the literature. With regard to adhesive remnant index, the groups in which the enamel was treated with NaOCl showed a behaviour similar to that of the resin composite. It is conclude with enamel treatment with NaOCl increased bonding strength of brackets bonded with GIC and RMGIC, but increased bond strength was not statistically significant when compared to the untreated groups.

Craniofacial morphology of patients with unilateral cleft lip and palate at two stages of skeletal maturation.

The aim of this retrospective cross-sectional investigation was to perform a 3D analysis of craniofacial morphology of patients with unilateral cleft lip and palate (UCLP) at two stages of skeletal maturation. Cone-beam computed tomography (CBCT) scans of 52 UCLP patients (34 prepubertal; 18 pubertal) were collected from an outpatient referral center for the treatment of craniofacial deformities. In total 15 multiplanar craniofacial landmarks were identified, 3D virtual surface models were created, and 13 variables were measured to assess the 3D Euclidean distances between landmarks and spatial position of the landmarks in the projected X, Y and Z components. Maxillary and mandibular pitch (clockwise, counterclockwise) rotation relative to the cranial base was also evaluated. The significance level was set at 5%. Maxillary retrusion value relative to the cranial base was higher and statistically significant greater (p = 0.028) in pubertal (SNA, 77.4° ± 6.2; N-ANS Y, 3.3 mm ± 3.1) than in prepubertal patients (SNA 81.0° ± 5.2; N-ANS Y, 5.8 mm ± 2.7). The posterior cranial base length (S-Ba Y) was significantly longer (p = 0.013) in pubertal (20.7 mm ± 3.4) than in prepubertal patients (18.4 mm ± 2.7). The upper facial height (N-ANS Z) was significantly greater (p = 0.01) in pubertal (46.9 mm ± 4.5) than in prepubertal patients (43.4 mm ± 3.0). Prepubertal and pubertal UCLP patients presented distinct patterns of craniofacial morphology, mainly in the sagittal component of the maxilla and in the posterior cranial base length. Pubertal patients had greater maxillary retrusion and posterior cranial base length.